Reference health
Multi-scale Modeling of Concrete Performance
11/11 checkable references clean · checked 2026-07-23
Every reference with a DOI in the deposited reference list resolved to a known work in Crossref or DataCite at the dated check, and none carried a retraction, withdrawal, or removal notice.
18 without a DOI — not checked. A reference deposited without a DOI is never matched by title or guessed at; it stays outside the checked set, and this line discloses that.
The 11 checked references that resolve
resolves10.1061/(ASCE)0733-9399(1989)115:8(1691)
Solidification Theory for Concrete Creep. I: Formulation
resolves10.14359/8100
Rheological Behavior of Hardened Cement Paste Under Hardened Cement Under Low Stresses
resolves10.1007/BF02480352
Modeling of structural performances under coupled environmental and weather actions
resolves10.2208/jscej.1998.585_79
MODELING OF CHLORIDE ION MOVEMENT AT THE SURFACE LAYER OF HARDENED CONCRETE
resolves10.14359/11617
Effect of Aggregate on Shrinkage of Concrete and a Hypothesis Concerning Shrinkage
resolves10.1680/macr.1997.49.181.303
Analysis of the drying shrinkage behaviour of concrete using a micromechanical model based on the micropore structure of concrete
The 18 references without a DOI — listed, not checked
no DOI — not checkedFreiser, H. and Fernando, Q. (1963). “<i>Ionic Equilibria in Analytical Chemistry</i>” New York: John Wiley & Sons, Inc.
no DOI — not checkedGjørv, O. E. and Sakai, K. (1995) “Testing of chloride diffusivity for concrete”, <i>In: Proc. of the International Conference on Concrete under Severe Conditions, CONSEC95</i>, 645-654.
no DOI — not checkedIshida, T., Chaube, R.P., Kishi, T. and Maekawa, K. (1998). “Modeling of pore water content in concrete under generic drying wetting conditions” <i>Concrete Library of JSCE</i>, 31, 275-287.
no DOI — not checkedIshida, T., Chaube, R.P., Kishi, T. and Maekawa, K. (1999b). “Micro-physical approach to coupled autogenous and drying shrinkage of concrete” <i>Concrete Library of JSCE</i>, 33, 71-81.
no DOI — not checkedIshida, T. and Maekawa, K. (2000) “An integrated computational system for mass/energy generation, transport, and mechanics of materials and structures” <i>Concrete Library of JSCE</i>, 36, 129-144.
no DOI — not checkedIshida, T. and Maekawa, K. (2001) “Modeling of pH profile in pore water based on mass transport and chemical equilibrium theory” <i>Concrete Library of JSCE</i>, 37, 131-146.
no DOI — not checkedIshida, T. and Maekawa, K. (2002) “Solidified cementitious material-structure model with coupled heat and moisture transport under arbitrary ambient conditions”, <i>Proceedings of fib congress 2002</i>, Osaka.
no DOI — not checkedKishi, T. and Maekawa, K. (1997). “Multi-component model for hydration heating of blended cement with blast furnace slag and fly ash” <i>Concrete Library of JSCE</i>, 30, 125-139.
no DOI — not checkedMabrouk, R., Ishida, T. and Maekawa, K. (1998) “Solidification model of hardening concrete composite for predicting autogenous and drying shrinkage”, <i>In</i>: E. Tazawa Ed. <i>Autogenous Shrinkage of Concrete</i>. London: E&FN SPON, 309-318.
no DOI — not checkedMabrouk, R., Ishida, T., and Maekawa, K. (2000). “A unified solidification model of hardening concrete composite at an early age” <i>Proceedings of JCI</i>, 22 (2), 661-666.
no DOI — not checkedShimomura, T. (1998). “Modelling of initial defect of concrete due to drying shrinkage”, <i>Concrete Under Severe Conditions 2, CONSEC 98</i>, <B>3</B>, (1998), 2074-2083.
no DOI — not checkedSaeki, T., Ohga, H. and Nagataki, S. (1991). “Mechanism of carbonation and prediction of carbonation process of concrete” <i>Concrete Library of JSCE</i>, 17, 23-36.
no DOI — not checkedTakeda, H. and Ishida, T. (2000). “Chloride equilibrium between chemically combined and adsorbed components in cementitious materials” <i>Proceedings of JCI</i>, 22 (2), 133-138.
no DOI — not checkedTakegami, H., Ishida, T. and Maekawa, K. (2002) “Generalized model for chloride ion transport and equilibrium in blast furnace slag concrete” <i>Proceedings of JCI</i>, 24 (1), 633-638.
no DOI — not checkedUomoto, T. and Takada, Y. (1993). “Factors affecting concrete carbonation ratio” <i>Concrete Library of JSCE</i>, 21, 31-44.
no DOI — not checkedWelty, J.R., Wicks, C.E., and Wilson, R.E. (1969). “<i>Fundamentals of momentum, heat, and mass transfer</i>” New York: John Wiley & Sons, Inc.
no DOI — not checkedWest, J.M. (1986). “<i>Basic Corrosion and Oxidation</i>” 2<sup>nd</sup> Ed. New York: John Wiley & Sons, 1986.
no DOI — not checkedYokozeki, K., Motohashi, K., Okada, K. and Tsutsumi, T. (1997) “A rational model to predict the service life of RC structures in marine environment”, <i>Forth CANMET/ACI International Conference on Durability of Concrete</i>, SP170-40, 777-798.
What this badge says. CiteStamped means the CHECKABLE references of this
work were clean at the dated check: each resolved to a known work in a public registry, and none
carried a retraction notice at that time. It says nothing about the quality, findings,
or importance of the work itself, and nothing about references deposited without a DOI.
checked 2026-07-23 — re-checked daily as this page is visited; titles and statuses come from Crossref and DataCite and are not part of the signed record
Embed this badge
Both snippets point at the live badge image and link back to this page. The badge re-renders from the daily check, so an embed never goes stale by more than a day of visits.
<a href="https://citestamp.com/citestamped/10.3151/jact.1.91"><img src="https://citestamp.com/citestamped/10.3151/jact.1.91/badge.svg" alt="CiteStamped reference-health badge" width="460" height="64"></a>
[](https://citestamp.com/citestamped/10.3151/jact.1.91)