Reference health
High-Temperature Corrosion Behavior of Al-Coated Ni-Base Alloys in Lithium Molten Salt for Electroreduction
50/50 checkable references clean · checked 2026-07-23
Every reference with a DOI in the deposited reference list resolved to a known work in Crossref or DataCite at the dated check, and none carried a retraction, withdrawal, or removal notice.
6 without a DOI — not checked. A reference deposited without a DOI is never matched by title or guessed at; it stays outside the checked set, and this line discloses that.
The 50 checked references that resolve
resolves10.1016/j.corsci.2017.12.022
Electrochemical studies of molten sulfates in LiCl-KCl-Na2SO4 at 700 °C
resolves10.1016/j.ceramint.2017.10.150
Evolution of microstructure and hot corrosion performance of La2Hf2O7 ceramic in contact with molten sulfate-vanadate salt
resolves10.1016/j.jallcom.2020.156010
Prediction modeling of Type-I hot corrosion performance of Ti–Al–Mo-X (X=Cr, Mn) alloys in (Na, K)2SO4 molten salt mixture environment at 900°C
resolves10.1016/j.corsci.2020.108819
Corrosion behavior of the resistance sintered TiAl based intermetallics induced by two different molten salt mixture
resolves10.1016/j.ijhydene.2019.03.080
Effect of LiNiO2-coated cathode on cell performance in molten carbonate fuel cells
resolves10.1016/j.ijhydene.2017.03.096
Mechanical strength improvement of aluminum foam-reinforced matrix for molten carbonate fuel cells
resolves10.1016/j.ijhydene.2020.07.183
Enhancing hydrogen production from steam electrolysis in molten hydroxides via selection of non-precious metal electrodes
resolves10.1016/j.corsci.2019.108369
Hot corrosion behaviour of yttrium and aluminium modified wear resistance coating alloy in mixed sulphate at 900 °C
resolves10.1016/j.solmat.2020.110650
Inhibiting hot corrosion of molten Li2CO3-Na2CO3-K2CO3 salt through graphitization of construction materials for concentrated solar power
resolves10.1016/j.est.2020.101381
Corrosion evaluation of eutectic chloride molten salt for new generation of CSP plants. Part 2: Materials screening performance
resolves10.1023/A:1010333407304
High-Temperature Oxidation and Corrosion of Structural Materials in Molten Chlorides
resolves10.1038/35030069
Direct electrochemical reduction of titanium dioxide to titanium in molten calcium chloride
resolves10.1016/j.corsci.2005.02.015
Thermodynamic and kinetic consideration on the corrosion of Fe, Ni and Cr beneath a molten KCl–ZnCl2 mixture
resolves10.1016/j.surfcoat.2020.126175
Microstructural evolution and hot corrosion behavior of La0.8Ba0.2TiO3–δ-YSZ double-layer thermal barrier coatings in Na2SO4 + V2O5 molten salt at 900 °C
resolves10.1016/j.corsci.2019.108295
Chloride- and sulphate-induced hot corrosion mechanism of super austenitic stainless steel S31254 under dry gas environment
resolves10.1016/j.solener.2019.07.065
Hot corrosion of different alloys in chloride and carbonate molten-salt mixtures under argon atmosphere
resolves10.1016/S0013-4686(01)00471-6
Corrosion behaviour of high-chromium ferritic steels in molten carbonate in cathode environment
resolves10.1016/j.corsci.2019.108408
Irradiation accelerated fluoride molten salt corrosion of nickel-based UNS N10003 alloy revealed by X-ray absorption fine structure
resolves10.1016/j.jnucmat.2020.152529
Corrosion behavior of a wear resistant Co-Mo-Cr-Si alloy in molten fluoride salts
resolves10.1016/j.corsci.2020.108823
Investigation of impurity driven corrosion behavior in molten 2LiF-BeF2 salt
resolves10.1016/j.jnucmat.2020.151994
Corrosion of commercial alloys in FLiNaK molten salt containing EuF3 and simulant fission product additives
resolves10.1016/j.jnucmat.2015.05.007
High-temperature corrosion behavior of Ni–16Mo–7Cr–4Fe superalloy containing yttrium in molten LiF–NaF–KF salt
resolves10.1016/j.msea.2006.05.099
Evaluation of hot corrosion resistance of HVOF coatings on a Ni-based superalloy in molten salt environment
resolves10.1016/j.ceramint.2017.05.077
Hot corrosion behaviour of nanostructured zirconia in molten NaVO3 salt
resolves10.1016/j.corsci.2014.03.034
High temperature corrosion and electrochemical behavior of INCONEL 625 weld overlay in PbSO4–Pb3O4–PbCl2–CdO–ZnO molten salt medium
resolves10.1016/j.corsci.2019.01.012
On the possibility of severe corrosion of a Ni-W-Cr alloy in fluoride molten salts at high temperature
resolves10.1016/j.jmst.2014.01.001
Influence of Sputtered Nanocrystalline Coating on Oxidation and Hot Corrosion of a Nickel-based Superalloy M951
resolves10.1016/j.surfcoat.2020.125949
Effects of the pack Al content on the microstructure and hot corrosion behavior of aluminide coatings applied on Inconel-600
resolves10.1016/j.jallcom.2016.11.394
Effects of alloying elements of nickel-based alloys on the hot-corrosion behavior in an electrolytic reduction process
resolves10.1016/j.corsci.2019.03.028
Durability of platinum coating anode in molten carbonate electrolysis cell
resolves10.1016/j.ijhydene.2018.02.196
Corrosion-resistant coating for cathode current collector and wet-seal area of molten carbonate fuel cells
resolves10.1016/j.surfcoat.2012.10.047
Development of hot corrosion resistant coatings for gas turbines burning biomass and waste derived fuel gases
resolves10.1016/j.surfcoat.2013.04.037
Hot corrosion tests on corrosion resistant coatings developed for gas turbines burning biomass and waste derived fuel gases
resolves10.1016/j.surfcoat.2017.07.058
Hot corrosion behaviour of plasma-sprayed functionally graded thermal barrier coatings in the presence of Na2SO4+ V2O5 molten salt
resolves10.1016/j.surfcoat.2006.06.026
Thermal barrier coatings for enhanced efficiency of gas turbine engines
resolves10.1016/j.surfcoat.2017.07.063
Wear behavior of corroded Al-Al2O3 composite coatings prepared by cold spray
resolves10.1016/j.surfcoat.2007.06.067
Damage mechanisms, life prediction, and development of EB-PVD thermal barrier coatings for turbine airfoils
resolves10.1021/acsapm.8b00025
Tunable Electromagnetic Interference Shielding Ability in a One-Dimensional Bagasse Fiber/Polyaniline Heterostructure
resolves10.1021/jp302131w
Improved Electromagnetic Interference Shielding Response of Poly(aniline)-Coated Fabrics Containing Dielectric and Magnetic Nanoparticles
resolves10.3390/coatings10020138
Anodic Protection Assessment Using Alumina-Forming Alloys in Chloride Molten Salt for CSP Plants
resolves10.1016/j.jsps.2019.09.013
Green synthesis and biological evaluation of novel 5-fluorouracil derivatives as potent anticancer agents
resolves10.1016/j.fuel.2020.118506
Development of biomass derived highly porous fast adsorbents for post-combustion CO2 capture
resolves10.2320/jinstmet1952.58.10_1196
High-Temperature Oxidation Behavior of Mechanically Alloyed Ni-Base Superalloys
resolves10.1007/s12540-020-00610-2
Corrosion and Oxidation Resistance Behaviors of Ta-Containing Low Alloying Zirconium
The 6 references without a DOI — listed, not checked
no DOI — not checkedCorrosion Performance of Heat Resistant Alloys in Na2SO4-V2O5 Molten Salts
no DOI — not checkedNi-Mo-Cr Alloy Corrosion in Molten NaCl-KCl-MgCl2 Salt and Vapour
no DOI — not checkedBarthelemy, C., Marmottant, A., Laurent, V., Bouvet, S., and Stabrowski, V.U.S. (2018). Cermet electrode material. (Patent No. 0073109 A1).
no DOI — not checkedMechanism for the Hot Corrosion of Nickel-Base Alloys
no DOI — not checkedHigh Temperature Oxidation and High Temperature Corrosion of Metallic Materials. I. High Temperature Oxidation
no DOI — not checkedTurkdogan, E.T. (1980). Physical Chemistry of High Temperature Technology, Academic Press.
What this badge says. CiteStamped means the CHECKABLE references of this
work were clean at the dated check: each resolved to a known work in a public registry, and none
carried a retraction notice at that time. It says nothing about the quality, findings,
or importance of the work itself, and nothing about references deposited without a DOI.
checked 2026-07-23 — re-checked daily as this page is visited; titles and statuses come from Crossref and DataCite and are not part of the signed record
Embed this badge
Both snippets point at the live badge image and link back to this page. The badge re-renders from the daily check, so an embed never goes stale by more than a day of visits.
<a href="https://citestamp.com/citestamped/10.3390/coatings11030328"><img src="https://citestamp.com/citestamped/10.3390/coatings11030328/badge.svg" alt="CiteStamped reference-health badge" width="460" height="64"></a>
[](https://citestamp.com/citestamped/10.3390/coatings11030328)