Reference health

Effect of Glass Bubbles on Friction and Wear Characteristics of PDMS-Based Composites

https://doi.org/10.3390/coatings11050603
CiteStamped reference-health badge
32/32 checkable references clean · checked 2026-07-22

Every reference with a DOI in the deposited reference list resolved to a known work in Crossref or DataCite at the dated check, and none carried a retraction, withdrawal, or removal notice.

The 32 checked references that resolve
resolves10.1002/elps.200900475
Recent developments in PDMS surface modification for microfluidic devices
resolves10.1016/j.sna.2013.08.010
Flexible PDMS electrode for one-point wearable wireless bio-potential acquisition
resolves10.1364/OL.32.002665
Simple liquid crystal display backlight unit comprising only a single-sheet micropatterned polydimethylsiloxane (PDMS) light-guide plate
resolves10.1016/j.sna.2009.01.026
Process and material properties of polydimethylsiloxane (PDMS) for Optical MEMS
resolves10.1088/0960-1317/21/10/105013
Friction, adhesion and wear properties of PDMS films on silicon sidewalls
resolves10.1039/b211280a
PDMS 2D optical lens integrated with microfluidic channels: principle and characterization
resolves10.1002/polb.22169
Polymers for neural implants
resolves10.1364/OE.26.001910
Novel optical fiber SPR temperature sensor based on MMF-PCF-MMF structure and gold-PDMS film
resolves10.1016/j.sna.2015.04.011
Extended PDMS stiffness range for flexible systems
resolves10.1016/0043-1648(95)06770-1
Friction and wear properties of E-glass fiber reinforced epoxy composites under different sliding contact conditions
resolves10.7736/KSPE.2018.35.8.803
A Study on Frictional Characteristics of PDMS Under Various Conditions
resolves10.1016/j.wear.2019.203066
Wear mode control of polydimethylsiloxane (PDMS) by load and composition
resolves10.1016/j.matdes.2005.11.004
Tribological behavior of thermoplastic polyurethane elastomers
resolves10.1007/s11249-008-9351-0
Surface Texture Effect on Friction of a Microtextured Poly(dimethylsiloxane) (PDMS)
resolves10.1016/j.triboint.2007.01.007
Soft-tribology: Lubrication in a compliant PDMS–PDMS contact
resolves10.1016/j.compscitech.2017.09.032
Dense graphene foam and hexagonal boron nitride filled PDMS composites with high thermal conductivity and breakdown strength
resolves10.3390/polym9120696
Experimental Investigation of the Magnetorheological Behavior of PDMS Elastomer Reinforced with Iron Micro/Nanoparticles
resolves10.1063/1.3068173
Mechanical characterization of magnetic nanowire–polydimethylsiloxane composites
resolves10.1016/j.jallcom.2019.04.017
Influence of re-melting on surface roughness and porosity of AlSi10Mg parts fabricated by selective laser melting
resolves10.1016/S0040-6090(01)01439-0
On the measurement of stress–strain curves by spherical indentation
resolves10.1089/ten.teb.2010.0520
Indentation Versus Tensile Measurements of Young's Modulus for Soft Biological Tissues
resolves10.1016/S0042-207X(00)00377-8
A review of analysis methods for sub-micron indentation testing
resolves10.1016/j.apsusc.2004.12.002
Friction behaviors of hydrogenated diamond-like carbon film in different environment sliding against steel ball
resolves10.1115/1.3650690
Calculation of Wear Rate
resolves10.1021/acs.iecr.0c05148
Hydroxypropyl Cellulose Films Filled with Halloysite Nanotubes/Wax Hybrid Microspheres
resolves10.1016/j.carbpol.2017.04.092
Coffee grounds as filler for pectin: Green composites with competitive performances dependent on the UV irradiation
resolves10.1023/A:1004490230078
The Hertzian contact surface
resolves10.1038/srep20563
Self-healing Characteristics of Collagen Coatings with Respect to Surface Abrasion
resolves10.1038/s41598-017-07106-x
Durability and Self-healing Effects of Hydrogel Coatings with respect to Contact Condition
resolves10.1016/j.cirp.2011.03.014
A novel approach to wear reduction of micro-components by synthesis of carbon nanotube-silver composite coating
resolves10.1038/am.2017.177
A highly flexible transparent conductive electrode based on nanomaterials
resolves10.1016/j.cirp.2017.04.072
Development of flexible polymer sheet with high surface durability using discretely embedded micro-balls
What this badge says. CiteStamped means the CHECKABLE references of this work were clean at the dated check: each resolved to a known work in a public registry, and none carried a retraction notice at that time. It says nothing about the quality, findings, or importance of the work itself, and nothing about references deposited without a DOI.

checked 2026-07-22 — re-checked daily as this page is visited; titles and statuses come from Crossref and DataCite and are not part of the signed record

Embed this badge

Both snippets point at the live badge image and link back to this page. The badge re-renders from the daily check, so an embed never goes stale by more than a day of visits.

<a href="https://citestamp.com/citestamped/10.3390/coatings11050603"><img src="https://citestamp.com/citestamped/10.3390/coatings11050603/badge.svg" alt="CiteStamped reference-health badge" width="460" height="64"></a>
[![CiteStamped reference-health badge](https://citestamp.com/citestamped/10.3390/coatings11050603/badge.svg)](https://citestamp.com/citestamped/10.3390/coatings11050603)