Reference health
Comparative in Mechanical Behavior of 6061 Aluminum Alloy Welded by Pulsed GMAW with Different Filler Metals and Heat Treatments
27/27 checkable references clean · checked 2026-07-22
Every reference with a DOI in the deposited reference list resolved to a known work in Crossref or DataCite at the dated check, and none carried a retraction, withdrawal, or removal notice.
15 without a DOI — not checked. A reference deposited without a DOI is never matched by title or guessed at; it stays outside the checked set, and this line discloses that.
The 27 checked references that resolve
resolves10.1016/j.actamat.2017.04.037
Analysis of the metastable precipitates in peak-hardness aged Al-Mg-Si(-Cu) alloys with differing Si contents
resolves10.4028/www.scientific.net/MSF.794-796.933
Early-Stage Precipitation Phenomena and Composition-Dependent Hardening in Al-Mg-Si-(Cu) Alloys
resolves10.1016/j.actamat.2012.10.044
Superior light metals by texture engineering: Optimized aluminum and magnesium alloys for automotive applications
resolves10.2464/jilm.60.213
Effect of Mn on welding liquation micro-cracking in heat affected zone of 6082 aluminum alloy
resolves10.1016/j.jmst.2016.11.004
Microstructure and Mechanical Properties of Pulse MIG Welded 6061/A356 Aluminum Alloy Dissimilar Butt Joints
resolves10.1016/j.jmatprotec.2005.02.193
Welding and environmental test condition effect in weldability and strength of Al alloy
resolves10.1016/j.jallcom.2016.11.140
Effect of Ag and Cu additions on natural aging and precipitation hardening behavior in Al-Mg-Si alloys
resolves10.1007/s00170-019-03673-7
Tensile and fracture behavior in 6061-T6 and 6061-T4 aluminum alloys welded by pulsed metal transfer GMAW
resolves10.1016/j.actamat.2017.12.036
The structural and compositional evolution of precipitates in Al-Mg-Si-Cu alloy
resolves10.1016/j.actamat.2015.08.017
Study of precipitation in Al–Mg–Si alloys by Atom Probe Tomography I. Microstructural changes as a function of ageing temperature
resolves10.1016/j.commatsci.2013.08.037
Ab initio interface configuration determination for β″ in Al–Mg–Si: Beyond the constraint of a preserved precipitate stoichiometry
resolves10.1016/j.jmatprotec.2019.03.030
Analysis of droplet transfer, weld formation and microstructure in Al-Cu alloy bead welding joint with pulsed ultrasonic-GMAW method
resolves10.1007/s11837-019-03375-1
Precipitates Dissolution, Phase Transformation, and Re-precipitation-Induced Hardness Variation in 6082-T6 Alloy During MIG Welding and Subsequent Baking
resolves10.1023/A:1004769305736
Precipitation sequence of various kinds of metastable phases in Al-1.0mass% Mg2Si-0.4mass% Si alloy
resolves10.1080/14786435.2013.857051
Aberration-corrected HAADF-STEM investigations of precipitate structures in Al–Mg–Si alloys with low Cu additions
resolves10.1007/s00170-019-03401-1
Effect of microstructure and precipitation phenomena on the mechanical behavior of AA6061-T6 aluminum alloy weld
resolves10.1016/j.matdes.2008.10.025
A comparative study of the mechanical properties of 6061-T6 GMA welds obtained by the indirect electric arc (IEA) and the modified indirect electric arc (MIEA)
resolves10.1155/2014/105713
Advantages of the Green Solid State FSW over the Conventional GMAW Process
The 15 references without a DOI — listed, not checked
no DOI — not checkedPolmear, I., St. John, D., Ne, J., and Qian, M. (2017). Light Alloys: From Traditional Alloys to Nanocrystals, Elsevier.
no DOI — not checkedA Study of Microstructures of Gas Metal Arc Welded Aluminium Alloy 6061-T6
no DOI — not checkedEffect of variable process parameter of MIG welding on aluminium alloy 6061-T6
no DOI — not checkedMechanical behaviour of 6082-T6 aluminum allow welds
no DOI — not checkedTorres, S.J. (2002). Evolución microestructural de la aleación de aluminio 6061 durante el proceso de soldadura MIG. Ing. Desarro., 52–65.
no DOI — not checked(2012). ASTM International ASTM B927/B917M—12 Standard Practice for Heat Treatment of Aluminum-Alloy Castings from All Processes. ASTM Volume 02.02 Aluminum and Magnesium Alloys, ASTM International.
no DOI — not checkedWelding Process Effects in Weldability Testing of Steels
no DOI — not checked(2003). BS EN 1011-1:1998—A2. Recommendations for Welding of Metallic Materials. Part 1: General Guidance for Arc Welding, European Committee for Standardization. A2 amendment.; Welding.
no DOI — not checkedPrediction of Mechanical properties of Al Alloy 6061-T6 by using GMAW
no DOI — not checked(2017). ASTM International ASTM E3-11 (2017) Standard Guide for Preparation of Metallographic Specimens. ASTM Volume 03.01 Metals—Mechanical Testing; Elevated and Low-Temperature Tests; Metallography, ASTM International.
no DOI — not checked(2015). ASTM International ASTM E407-07 (2015)e1 Standard Practice for Microetching Metals and Alloys. ASTM Volume 03.01 Metals—Mechanical Testing; Elevated and Low-Temperature Tests; Metallography, ASTM International.
no DOI — not checked(2017). ASTM E92-17 Standard Test Methods for Vickers Hardness and Knoop Hardness of Metallic Materials. ASTM Volume 03.01 Metals—Mechanical Testing; Elevated and Low-Temperature Tests; Metallography, ASTM International.
no DOI — not checked(2016). ASTM International ASTM E8/E8M—16a Standard Test Methods for Tension Testing of Metallic Materials. ASTM Volume 03.01 Metals—Mechanical Testing; Elevated and Low-Temperature Tests; Metallography, ASTM International.
no DOI — not checked(2013). AWS D1.2/D1.2M Structural Welding Code—Aluminum, American Welding Society.
no DOI — not checkedTo Determine Effects of Gas Metal Arc Welding (GMAW) Parameters on Mechanical Properties of Aluminium Alloys
What this badge says. CiteStamped means the CHECKABLE references of this
work were clean at the dated check: each resolved to a known work in a public registry, and none
carried a retraction notice at that time. It says nothing about the quality, findings,
or importance of the work itself, and nothing about references deposited without a DOI.
checked 2026-07-22 — re-checked daily as this page is visited; titles and statuses come from Crossref and DataCite and are not part of the signed record
Embed this badge
Both snippets point at the live badge image and link back to this page. The badge re-renders from the daily check, so an embed never goes stale by more than a day of visits.
<a href="https://citestamp.com/citestamped/10.3390/ma12244157"><img src="https://citestamp.com/citestamped/10.3390/ma12244157/badge.svg" alt="CiteStamped reference-health badge" width="460" height="64"></a>
[](https://citestamp.com/citestamped/10.3390/ma12244157)