Reference health
Development of Injection-Molded Polylactide Pieces with High Toughness by the Addition of Lactic Acid Oligomer and Characterization of Their Shape Memory Behavior
65/65 checkable references clean · checked 2026-07-22
Every reference with a DOI in the deposited reference list resolved to a known work in Crossref or DataCite at the dated check, and none carried a retraction, withdrawal, or removal notice.
5 without a DOI — not checked. A reference deposited without a DOI is never matched by title or guessed at; it stays outside the checked set, and this line discloses that.
The 65 checked references that resolve
resolves10.1039/C0PY00204F
Single site catalysts for stereoselective ring-opening polymerization of lactides
resolves10.3390/app9030533
Bioactive Multilayer Polylactide Films with Controlled Release Capacity of Gallic Acid Accomplished by Incorporating Electrospun Nanostructured Coatings and Interlayers
resolves10.1016/j.fpsl.2019.100357
Preparation, characterization and antimicrobial properties of electrospun polylactide films containing Allium ursinum L. extract
resolves10.1080/19440049.2017.1321786
Performance properties, lactic acid specific migration and swelling by simulant of biodegradable poly(lactic acid)/nanoclay multilayer films for food packaging
resolves10.1002/app.42597
Recent advances and migration issues in biodegradable polymers from renewable sources for food packaging
resolves10.1111/1750-3841.12534
A Review of Poly(Lactic Acid)‐Based Materials for Antimicrobial Packaging
resolves10.1016/j.optlastec.2017.11.006
Femtosecond laser micromachining of polylactic acid/graphene composites for designing interdigitated microelectrodes for sensor applications
resolves10.1007/s12541-014-0522-7
Aerobic biodegradability of polyester/polylactic acid composites for automotive NVH parts
resolves10.1016/j.indcrop.2009.11.012
Poly(lactic acid) and Osage Orange wood fiber composites for agricultural mulch films
resolves10.1021/acssuschemeng.9b02527
No Such Thing as Trash: A 3D-Printable Polymer Composite Composed of Oil-Extracted Spent Coffee Grounds and Polylactic Acid with Enhanced Impact Toughness
resolves10.3390/polym9120694
Preparation and Properties of Novel Thermoplastic Vulcanizate Based on Bio-Based Polyester/Polylactic Acid, and Its Application in 3D Printing
resolves10.1177/0954406219861665
Investigations of polylactic acid reinforced composite feedstock filaments for multimaterial three-dimensional printing applications
resolves10.1007/s10973-018-7967-3
Evaluation of commercially available polylactic acid (PLA) filaments for 3D printing applications
resolves10.3390/ma10070748
Thermomechanical Properties of Polylactic Acid-Graphene Composites: A State-of-the-Art Review for Biomedical Applications
resolves10.1016/j.clay.2017.12.016
Nanotubes in nanofibers: Antibacterial multilayered polylactic acid/halloysite/gentamicin membranes for bone regeneration application
resolves10.1166/jbmb.2019.1900
End-Group Functionalization of Polyethylene Glycol-Polylactic Acid Copolymer and Its Application in the Field of Pharmaceutical Carriers
resolves10.3390/polym11121908
Study of the Influence of the Reprocessing Cycles on the Final Properties of Polylactide Pieces Obtained by Injection Molding
resolves10.1016/j.compositesb.2018.04.017
Effect of different compatibilizers on injection-molded green composite pieces based on polylactide filled with almond shell flour
resolves10.3390/ma11112138
Ductility and Toughness Improvement of Injection-Molded Compostable Pieces of Polylactide by Melt Blending with Poly(ε-caprolactone) and Thermoplastic Starch
resolves10.1021/acsomega.6b00325
Synthesis of Glycerol-Based Biopolyesters as Toughness Enhancers for Polylactic Acid Bioplastic through Reactive Extrusion
resolves10.1016/j.polymdegradstab.2016.11.022
Synthesis of PLLA-based block copolymers for improving melt strength and toughness of PLLA by in situ reactive blending
resolves10.1007/s13233-019-7018-3
Synthesis and Characterization of Poly(ester amide)s Consisting of Poly(L-lactic acid) and Poly(butylene succinate) Segments with 2,2′-Bis(2-oxazoline) Chain Extending
resolves10.1080/10601325.2013.802196
Composition, Morphology and Properties of Poly(lactic acid) and Poly(butylene succinate) Copolymer System via Coupling Reaction
resolves10.3390/ma10111339
Environmentally Friendly Compatibilizers from Soybean Oil for Ternary Blends of Poly(lactic acid)-PLA, Poly(ε-caprolactone)-PCL and Poly(3-hydroxybutyrate)-PHB
resolves10.1007/s00289-018-2475-y
High toughness poly(lactic acid) (PLA) formulations obtained by ternary blends with poly(3-hydroxybutyrate) (PHB) and flexible polyesters from succinic acid
resolves10.3390/polym11071193
Polylactide (PLA) and Its Blends with Poly(butylene succinate) (PBS): A Brief Review
resolves10.1021/acs.iecr.6b03151
High Melt Strength and High Toughness PLLA/PBS Blends by Copolymerization and in Situ Reactive Compatibilization
resolves10.3389/fmats.2019.00206
Phase Structure, Compatibility, and Toughness of PLA/PCL Blends: A Review
resolves10.1016/j.compositesb.2018.10.060
Improved fracture toughness and ductility of PLA composites by incorporating a small amount of surface-modified helical carbon nanotubes
resolves10.1039/C7RA04302C
Excellent rheological performance and impact toughness of cellulose nanofibers/PLA/ionomer composite
resolves10.1002/app.46669
An efficient plasticization method for poly(lactic acid) using combination of liquid‐state and solid‐state plasticizers
resolves10.3144/expresspolymlett.2018.69
Manufacturing and compatibilization of PLA/PBAT binary blends by cottonseed oil-based derivatives
resolves10.1016/j.eurpolymj.2017.11.039
Reactive toughening of injection-molded polylactide pieces using maleinized hemp seed oil
resolves10.1016/j.matdes.2017.11.031
Enhancement of the mechanical and thermal properties of injection-molded polylactide parts by the addition of acrylated epoxidized soybean oil
resolves10.1016/j.carbpol.2016.03.082
The effect of maleinized linseed oil (MLO) on mechanical performance of poly(lactic acid)-thermoplastic starch (PLA-TPS) blends
resolves10.1002/pi.5329
The effect of maleinized linseed oil as biobased plasticizer in poly(lactic acid)‐based formulations
resolves10.1002/mame.201500032
Tailoring Polylactide Properties for Automotive Applications: Effects of Co-Addition of Halloysite Nanotubes and Selected Plasticizer
resolves10.1016/j.carbpol.2019.115131
Combined effect of cellulose nanocrystals, carvacrol and oligomeric lactic acid in PLA_PHB polymeric films
resolves10.1016/j.polymdegradstab.2012.11.009
Characterization and ageing study of poly(lactic acid) films plasticized with oligomeric lactic acid
resolves10.3144/expresspolymlett.2011.84
Crystallization kinetics of poly(lactic acid)-talc composites
resolves10.1002/app.48154
Improving the ductility of polylactic acid parts produced by fused deposition modeling through polyhydroxyalkanoate additions
resolves10.3390/polym11061077
Nonisothermal Crystallization of Surface-Treated Alumina and Aluminum Nitride-Filled Polylactic Acid Hybrid Composites
resolves10.1016/j.indcrop.2017.10.062
Compatibilization of highly sustainable polylactide/almond shell flour composites by reactive extrusion with maleinized linseed oil
resolves10.1002/pen.23873
The morphology, properties, and shape memory behavior of polylactic acid/thermoplastic polyurethane blends
resolves10.1016/j.polymertesting.2016.03.003
Crystallization controlled shape memory behaviors of dynamically vulcanized poly(l-lactide)/poly(ethylene vinyl acetate) blends
resolves10.1039/C5RA20632D
Thermal and electroactive shape memory behaviors of poly(
<scp>l</scp>
-lactide)/thermoplastic polyurethane blend induced by carbon nanotubes
resolves10.1007/s10853-013-7929-x
An effect of lactic acid oligomers on the barrier properties of polylactide
resolves10.1007/s10924-011-0285-5
Analysis of the Structure-Properties Relationships of Different Multiphase Systems Based on Plasticized Poly(Lactic Acid)
resolves10.3390/ma10070809
Processing Conditions, Thermal and Mechanical Responses of Stretchable Poly (Lactic Acid)/Poly (Butylene Succinate) Films
resolves10.1007/s10853-016-9838-2
Plasticizing effect of biobased epoxidized fatty acid esters on mechanical and thermal properties of poly(lactic acid)
resolves10.1155/2013/976373
Impact Toughness and Ductility Enhancement of Biodegradable Poly(lactic acid)/Poly(<i>ε</i>-caprolactone) Blends via Addition of Glycidyl Methacrylate
resolves10.3390/polym10121401
A Facile Fabrication of High Toughness Poly(lactic Acid) via Reactive Extrusion with Poly(butylene Succinate) and Ethylene-Methyl Acrylate-Glycidyl Methacrylate
resolves10.1016/j.compositesb.2019.107028
Mechanical properties, rheological behaviors, and phase morphologies of high-toughness PLA/PBAT blends by in-situ reactive compatibilization
resolves10.3390/polym11081354
Optimization of the Curing and Post-Curing Conditions for the Manufacturing of Partially Bio-Based Epoxy Resins with Improved Toughness
resolves10.1007/s10924-013-0628-5
Synthesis and Characterization of Lactic Acid Oligomers: Evaluation of Performance as Poly(Lactic Acid) Plasticizers
resolves10.1002/app.11077
The effects of plasticizers on the dynamic mechanical and thermal properties of poly(lactic acid)
resolves10.1016/j.polymer.2012.03.034
Low-molecular weight aliphatic amides as nucleating agents for poly (L-lactic acid): Conformation variation induced crystallization enhancement
resolves10.1007/s10973-019-08377-4
Differential thermal analysis of the antibacterial effect of PLA-based materials planned for 3D printing
resolves10.3390/polym9100528
Morphology, Crystallization and Thermal Behaviors of PLA-Based Composites: Wonderful Effects of Hybrid GO/PEG via Dynamic Impregnating
resolves10.3390/molecules20011579
Synergistic Effects of Nucleating Agents and Plasticizers on the Crystallization Behavior of Poly(lactic acid)
resolves10.1007/s10856-006-0100-3
Study on the shape memory effects of poly(l-lactide-co-ε-caprolactone) biodegradable polymers
resolves10.1016/j.eurpolymj.2019.05.014
Shape memory effect on electrospun PLA-based fibers tailoring their thermal response
The 5 references without a DOI — listed, not checked
no DOI — not checkedControlled delivery of gentamicin antibiotic from bioactive electrospun polylactide-based ultrathin fibers
no DOI — not checked(2018). Bioplastics market data 2018. Global Production Capacities of Bioplastics 2018–2023, European Bioplastics.
no DOI — not checkedEffect of the addition of sepiolite on the morphology and properties of melt compounded PHBV/PLA blends
no DOI — not checkedPreparation and characterization of poly(lactic acid) with adipate ester added as a plasticizer
no DOI — not checkedHu, J. (2011). Novel biodegradable shape memory composites based on PLA and PCL crosslinked by polyisocyanate. Advances in Biomedical Engineering, Information Engineering Research Inst, USA.
What this badge says. CiteStamped means the CHECKABLE references of this
work were clean at the dated check: each resolved to a known work in a public registry, and none
carried a retraction notice at that time. It says nothing about the quality, findings,
or importance of the work itself, and nothing about references deposited without a DOI.
checked 2026-07-22 — re-checked daily as this page is visited; titles and statuses come from Crossref and DataCite and are not part of the signed record
Embed this badge
Both snippets point at the live badge image and link back to this page. The badge re-renders from the daily check, so an embed never goes stale by more than a day of visits.
<a href="https://citestamp.com/citestamped/10.3390/polym11122099"><img src="https://citestamp.com/citestamped/10.3390/polym11122099/badge.svg" alt="CiteStamped reference-health badge" width="460" height="64"></a>
[](https://citestamp.com/citestamped/10.3390/polym11122099)