Reference health

Enhanced Mechanical Properties of Polylactic Acid/Poly(Butylene Adipate-co-Terephthalate) Modified with Maleic Anhydride

https://doi.org/10.3390/polym16040518
CiteStamped reference-health badge
63/63 checkable references clean · checked 2026-07-24

Every reference with a DOI in the deposited reference list resolved to a known work in Crossref or DataCite at the dated check, and none carried a retraction, withdrawal, or removal notice.

8 without a DOI — not checked. A reference deposited without a DOI is never matched by title or guessed at; it stays outside the checked set, and this line discloses that.

The 63 checked references that resolve
resolves10.1002/anie.201805766
Plastics of the Future? The Impact of Biodegradable Polymers on the Environment and on Society
resolves10.1016/j.resconrec.2013.07.003
Polymer film packaging for food: An environmental assessment
resolves10.5322/JESI.2015.24.8.1037
Study on Properties of Eco-friendly Pot with Biodegradable PLA/PBAT Blend Film
resolves10.1016/j.jclepro.2012.05.008
Expanding bioplastics production: sustainable business innovation in the chemical industry
resolves10.1016/j.carbpol.2019.04.030
High-performance starch biocomposites with celullose from waste biomass: Film properties and retrogradation behaviour
resolves10.1111/j.1365-2621.1988.tb08965.x
Optimum Extrusion‐Cooking Conditions for Maximum Expansion of Corn Starch
resolves10.3390/ma14206092
Properties of Biocomposites Produced with Thermoplastic Starch and Digestate: Physicochemical and Mechanical Characteristics
resolves10.1016/0260-8774(83)90023-7
Response surface methodology in the control of thermoplastic extrusion of starch
resolves10.1016/j.ijfatigue.2022.106798
Mechanical fatigue of biodegradable polymers: A study on polylactic acid (PLA), polybutylene succinate (PBS) and polybutylene adipate terephthalate (PBAT)
resolves10.1016/j.polymdegradstab.2008.10.013
Biodegradability of poly(butylene succinate) (PBS) composite reinforced with jute fibre
resolves10.1002/app.35509
Preparation and characterization of polyacrylate/polymerized rosin composite emulsions by seeded semicontinuous emulsion polymerization
resolves10.3390/jcs4040168
Study on Toughness Improvement of a Rosin-Sourced Epoxy Matrix Composite for Green Aerospace Application
resolves10.1016/j.ijbiomac.2018.12.002
Poly (lactic acid) blends: Processing, properties and applications
resolves10.1016/j.tifs.2008.07.003
Biodegradable polymers for food packaging: a review
resolves10.1016/j.ijbiomac.2017.12.048
Fully biodegradable Poly(lactic acid)/Starch blends: A review of toughening strategies
resolves10.7317/pk.2020.44.5.689
Compatibility and Impact Properties of Poly(lactic acid)/Poly(butylene adipate-co-terephthalate) Blend Using Poly(butyl acrylate)
resolves10.1016/j.matdes.2020.108603
One-step compatibilization of poly(lactic acid) and tannin via reactive extrusion
resolves10.1016/j.egypro.2016.05.046
Effect of Compatibilizer on PLA/PP Blend for Injection Molding
resolves10.1016/j.eurpolymj.2008.01.008
Structure and properties for biomass-based polyester blends of PLA and PBS
resolves10.1016/j.biotechadv.2007.12.005
Biological degradation of plastics: A comprehensive review
resolves10.1016/j.polymertesting.2015.02.005
Influence of chain extender on mechanical, thermal and morphological properties of blown films of PLA/PBAT blends
resolves10.1016/j.polymertesting.2013.05.001
Biodegradation behavior of poly(butylene adipate-co-terephthalate) (PBAT), poly(lactic acid) (PLA), and their blend under soil conditions
resolves10.1016/j.polymdegradstab.2008.10.004
Thermal degradation of poly(lactic acid) (PLA) and poly(butylene adipate-co-terephthalate) (PBAT) and their blends upon melt processing
resolves10.1016/j.lwt.2015.12.062
Preparation of poly(lactide)/poly(butylene adipate-co-terephthalate) blend films using a solvent casting method and their food packaging application
resolves10.1016/j.reactfunctpolym.2020.104490
PLA-based functionally graded laminates for tunable controlled release of carvacrol obtained by combining electrospinning with solvent casting
resolves10.1002/app.23403
Effect of the processing methods on the performance of polylactide films: Thermocompression versus solvent casting
resolves10.1002/app.30772
Morphology, biodegradability, mechanical, and thermal properties of nanocomposite films based on PLA and plasticized PLA
resolves10.3390/polym12091904
Plasticization Effect of Poly(Lactic Acid) in the Poly(Butylene Adipate–co–Terephthalate) Blown Film for Tear Resistance Improvement
resolves10.1021/ie900576f
Properties of Poly(lactic acid)/Poly(butylene adipate-<i>co</i>-terephthalate)/Nanoparticle Ternary Composites
resolves10.1002/app.46660
A new approach for flexible PBAT/PLA/CaCO<sub>3</sub> films into agriculture
resolves10.1016/j.biortech.2010.05.075
Effect of glycidyl methacrylate (GMA) on the thermal, mechanical and morphological property of biodegradable PLA/PBAT blend and its nanocomposites
resolves10.3390/polym9110591
Effect of MAH-g-PLA on the Properties of Wood Fiber/Polylactic Acid Composites
resolves10.1021/bm0494242
Production of Starch Foams by Twin-Screw Extrusion:  Effect of Maleated Poly(butylene adipate-<i>co</i>-terephthalate) as a Compatibilizer
resolves10.1002/(SICI)1099-0518(19990601)37:11<1693::AID-POLA15>3.0.CO;2-Y
Functionalization of polyesters with maleic anhydride by reactive extrusion
resolves10.1002/app.1989.070370424
Adhesive property of polypropylene modified with maleic anhydride by extrusion molding
resolves10.1002/(SICI)1097-4628(19990425)72:4<477::AID-APP3>3.0.CO;2-Q
Maleation of polylactide (PLA) by reactive extrusion
resolves10.1021/acs.biomac.7b00578
Structure and Biocompatibility of Bioabsorbable Nanocomposites of Aliphatic-Aromatic Copolyester and Cellulose Nanocrystals
resolves10.1134/S0965545X1703018X
Melt processing of maleic anhydride grafted poly(lactic acid) and its compatibilizing effect on poly(lactic acid)/poly(butylene adipate-co-terephthalate) blend and their composite
resolves10.1016/j.polymertesting.2011.12.005
Grafting of maleic anhydride on poly(L-lactic acid). Effects on physical and mechanical properties
resolves10.1002/app.45448
Biodegradable biocomposites from poly(butylene adipate‐<i>co</i>‐terephthalate) and miscanthus: Preparation, compatibilization, and performance evaluation
resolves10.1016/j.compositesa.2014.05.008
Study on short ramie fiber/poly(lactic acid) composites compatibilized by maleic anhydride
resolves10.1080/15440478.2018.1441092
Tailoring PBAT/PLA/Babassu films for suitability of agriculture mulch application
resolves10.1016/j.polymdegradstab.2014.01.025
In-situ compatibilization of poly(lactic acid) and poly(butylene adipate-co-terephthalate) blends by using dicumyl peroxide as a free-radical initiator
resolves10.1016/j.polymertesting.2018.11.008
Fabricating sea-island structure and co-continuous structure in PMMA/ASA and PMMA/CPE blends: Correlation between impact property and phase morphology
resolves10.3390/ijms23137166
Maleic Anhydride-Grafted PLA Preparation and Characteristics of Compatibilized PLA/PBSeT Blend Films
resolves10.1021/ma000700o
Combinatorial Rheology of Branched Polymer Melts
resolves10.1007/s003970000104
Quantitative predictions of linear viscoelastic rheological properties of entangled polymers
resolves10.1021/ma00134a060
Viscoelastic properties of star-shaped polymers
resolves10.1093/oso/9780198520597.001.0001
Polymer Physics
resolves10.1002/pen.23341
Physical extruder foaming of poly(lactic acid)—processing and foam properties
resolves10.1002/polb.20144
Universality of linear viscoelasticity of monodisperse linear polymers
resolves10.1021/ma961559f
Parameter-Free Theory for Stress Relaxation in Star Polymer Melts
resolves10.1002/app.12643
Study on rheological behavior of polypropylene/clay nanocomposites
resolves10.1016/j.carbon.2007.08.042
Rheological and electrical properties of polypropylene composites containing functionalized multi-walled carbon nanotubes and compatibilizers
resolves10.1007/s10853-008-3049-4
Preparation and properties of biodegradable poly(lactic acid)/poly(butylene adipate-co-terephthalate) blend with glycidyl methacrylate as reactive processing agent
resolves10.3390/polym11050771
Super-Toughened Poly(lactic Acid) with Poly(ε-caprolactone) and Ethylene-Methyl Acrylate-Glycidyl Methacrylate by Reactive Melt Blending
resolves10.1002/pat.4274
The morphological, mechanical, rheological, and thermal properties of <scp>PLA/PBAT</scp> blown films with chain extender
resolves10.1002/pen.24623
Influence of methyl methacrylate‐butadiene‐styrene copolymer on plasticized polylactide blown films
resolves10.1016/j.eurpolymj.2015.03.054
Modification of poly(lactic acid) using itaconic anhydride by reactive extrusion
resolves10.1007/s12221-013-1783-y
Effect of various parameters on the chemical grafting of amide monomers to poly(lactic acid)
resolves10.1039/D2RA03513H
Effect of maleic anhydride grafted poly(lactic acid) on rheological behaviors and mechanical performance of poly(lactic acid)/poly(ethylene glycol) (PLA/PEG) blends
resolves10.1016/j.compositesb.2019.107028
Mechanical properties, rheological behaviors, and phase morphologies of high-toughness PLA/PBAT blends by in-situ reactive compatibilization
resolves10.1016/j.polymdegradstab.2022.110149
Super-toughed polylactide/poly (butylene adipate-co-terephthalate) blends in-situ compatibilized by poly (glycidyl methacrylate) with different molecular weight
The 8 references without a DOI — listed, not checked
no DOI — not checkedA Study on Environment-friendly Plastic materials due to the Global Environmental Regulation
no DOI — not checkedBiodegradable polyester-polybutylene succinate (PBS): A review
no DOI — not checkedModification of PLA/PBAT Blends and Thermal/Mechanical Properties
no DOI — not checkedPreparation and Physical Properties of Eco-Friendly Biodegradable PLA/PBAT/HCO Blended Films
no DOI — not checkedStudy of Properties for Compatibility and Composition of PLA/PMMA/PBAT Blends
no DOI — not checked(2009). Standard Test Method for Tensile Properties of Plastics (Standard No. ASTM D882-03).
no DOI — not checked(2009). Standard Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method (Standard No. ASTM D1922-09).
no DOI — not checkedPreparation of MA-PLA Using Radical Initiator and Miscibility Improvement of PLA/PA11 Blends
What this badge says. CiteStamped means the CHECKABLE references of this work were clean at the dated check: each resolved to a known work in a public registry, and none carried a retraction notice at that time. It says nothing about the quality, findings, or importance of the work itself, and nothing about references deposited without a DOI.

checked 2026-07-24 — re-checked daily as this page is visited; titles and statuses come from Crossref and DataCite and are not part of the signed record

view as graph · paper page

Embed this badge

Both snippets point at the live badge image and link back to this page. The badge re-renders from the daily check, so an embed never goes stale by more than a day of visits.

<a href="https://citestamp.com/citestamped/10.3390/polym16040518"><img src="https://citestamp.com/citestamped/10.3390/polym16040518/badge.svg" alt="CiteStamped reference-health badge" width="460" height="64"></a>
[![CiteStamped reference-health badge](https://citestamp.com/citestamped/10.3390/polym16040518/badge.svg)](https://citestamp.com/citestamped/10.3390/polym16040518)