Reference health
3D Printing of PLA/Magnetic Ferrite Composites: Effect of Filler Particles on Magnetic Properties of Filament
36/36 checkable references clean · checked 2026-07-23
Every reference with a DOI in the deposited reference list resolved to a known work in Crossref or DataCite at the dated check, and none carried a retraction, withdrawal, or removal notice.
6 without a DOI — not checked. A reference deposited without a DOI is never matched by title or guessed at; it stays outside the checked set, and this line discloses that.
The 36 checked references that resolve
resolves10.3390/ma14216442
Preparation of Smart Materials by Additive Manufacturing Technologies: A Review
resolves10.1515/eng-2021-0063
A review on the fused deposition modeling (FDM) 3D printing: Filament processing, materials, and printing parameters
resolves10.1016/j.matpr.2020.07.069
Functional fillers in composite filaments for fused filament fabrication; a review
resolves10.1016/j.compositesb.2016.11.034
3D printing of polymer matrix composites: A review and prospective
resolves10.1109/JMEMS.2019.2910215
Fully 3D-Printed, Monolithic, Mini Magnetic Actuators for Low-Cost, Compact Systems
resolves10.1016/j.apmt.2018.11.004
Additive manufacturing technology empowered complex electromechanical energy conversion devices and transformers
resolves10.1002/adfm.202102777
3D Printing of Functional Magnetic Materials: From Design to Applications
resolves10.1002/aisy.201900069
3D Printing of Thermoplastic‐Bonded Soft‐ and Hard‐Magnetic Composites: Magnetically Tuneable Architectures and Functional Devices
resolves10.1038/s41598-017-09864-0
3D Printing of Polymer-Bonded Rare-Earth Magnets With a Variable Magnetic Compound Fraction for a Predefined Stray Field
resolves10.1063/1.5139493
Polymer-bonded anisotropic SrFe12O19 filaments for fused filament fabrication
resolves10.1016/j.jmmm.2019.165664
Net-shaped barium and strontium ferrites by 3D printing with enhanced magnetic performance from milled powders
resolves10.1038/s41598-018-33059-w
Additive Manufactured and Topology Optimized Passive Shimming Elements for Permanent Magnetic Systems
resolves10.1038/s41586-018-0185-0
Printing ferromagnetic domains for untethered fast-transforming soft materials
resolves10.1039/C9QM00012G
Enhanced intrinsic saturation magnetization of Zn
<sub>x</sub>
Co
<sub>1−x</sub>
Fe
<sub>2</sub>
O
<sub>4</sub>
nanocrystallites with metastable spinel inversion
resolves10.3390/ma13215014
Green Synthesis of Co-Zn Spinel Ferrite Nanoparticles: Magnetic and Intrinsic Antimicrobial Properties
resolves10.1016/j.jallcom.2019.04.308
Zn-doped cobalt ferrite: Tuning the interactions by chemical composition
resolves10.1016/j.pmatsci.2012.04.001
Hexagonal ferrites: A review of the synthesis, properties and applications of hexaferrite ceramics
resolves10.1038/s41598-018-25662-8
Enhancement of magnetic properties through morphology control of SrFe12O19 nanocrystallites
resolves10.1021/acs.jpcc.1c00355
Tuning the Magnetic Properties of Hard–Soft SrFe<sub>12</sub>O<sub>19</sub>/CoFe<sub>2</sub>O<sub>4</sub> Nanostructures via Composition/Interphase Coupling
resolves10.1007/s11051-005-9028-7
CoFe2O4 nanocrystalline powders prepared by citrate-gel methods: Synthesis, structure and magnetic properties
resolves10.1038/srep14112
Magnetic properties of ball-milled SrFe12O19 particles consolidated by Spark-Plasma Sintering
resolves10.1016/j.jallcom.2021.160779
Effect of citric acid on the morpho-structural and magnetic properties of ultrasmall iron oxide nanoparticles
resolves10.1038/nprot.2017.157
Electroactive poly(vinylidene fluoride)-based structures for advanced applications
resolves10.3390/ma11020189
A 3D-Printable Polymer-Metal Soft-Magnetic Functional Composite—Development and Characterization
resolves10.1016/j.mtcomm.2020.101049
Novel procedure for laboratory scale production of composite functional filaments for additive manufacturing
resolves10.1016/j.matdes.2022.110806
Functional, thermal and rheological properties of polymer-based magnetic composite filaments for additive manufacturing
resolves10.1186/s40645-015-0078-x
New parameter of roundness R: circularity corrected by aspect ratio
resolves10.3390/jcs4010001
Composite Reinforcement Architectures: A Review of Field-Assisted Additive Manufacturing for Polymers
The 6 references without a DOI — listed, not checked
no DOI — not checkedMahamood, R.M., Jen, T.C., Akinlabi, S.A., Hassan, S., Abdulrahman, K.O., and Akinlabi, E.T. (2021). Additive Manufacturing, Elsevier.
no DOI — not checked(2022, September 01). Iron-Filled Metal Composite PLA, (n.d.). Available online: www.proto-pasta.com/products/magnetic-iron-pla.
no DOI — not checkedManipulating magnetic anisotropy in fused filament fabricated parts via macroscopic shape, mesoscopic infill orientation, and infill percentage
no DOI — not checkedVarvaro, G., Omelyanchik, A., and Peddis, D. (2022). Tailored Functional Oxide Nanomaterials, Wiley.
no DOI — not checkedMorrish, A.H. (1965). The Physical Principles of Magnetism, IEEE Press.
no DOI — not checkedA Mechanism of Magnetic Hysteresis in Heterogeneous Alloys
What this badge says. CiteStamped means the CHECKABLE references of this
work were clean at the dated check: each resolved to a known work in a public registry, and none
carried a retraction notice at that time. It says nothing about the quality, findings,
or importance of the work itself, and nothing about references deposited without a DOI.
checked 2026-07-23 — re-checked daily as this page is visited; titles and statuses come from Crossref and DataCite and are not part of the signed record
Embed this badge
Both snippets point at the live badge image and link back to this page. The badge re-renders from the daily check, so an embed never goes stale by more than a day of visits.
<a href="https://citestamp.com/citestamped/10.3390/pr10112412"><img src="https://citestamp.com/citestamped/10.3390/pr10112412/badge.svg" alt="CiteStamped reference-health badge" width="460" height="64"></a>
[](https://citestamp.com/citestamped/10.3390/pr10112412)