Reference health

A Composite Fabry-Perot Interferometric Sensor with the Dual-Cavity Structure for Simultaneous Measurement of High Temperature and Strain

https://doi.org/10.3390/s21154989
CiteStamped reference-health badge
32/32 checkable references clean · checked 2026-07-22

Every reference with a DOI in the deposited reference list resolved to a known work in Crossref or DataCite at the dated check, and none carried a retraction, withdrawal, or removal notice.

4 without a DOI — not checked. A reference deposited without a DOI is never matched by title or guessed at; it stays outside the checked set, and this line discloses that.

The 32 checked references that resolve
resolves10.3390/s18051304
Displacement and Strain Measurement up to 1000 °C Using a Hollow Coaxial Cable Fabry-Perot Resonator
resolves10.1016/j.sna.2017.03.023
High-temperature static strain langasite SAWR sensor: Temperature compensation and numerical calibration for direct strain reading
resolves10.1177/0309324714522166
Special issue on strain measurement in extreme environments
resolves10.1109/JSEN.2020.2969431
Elimination of Thermal Strain Interference in Mechanical Strain Measurement at High Temperature Using an EFPI-RFBG Hybrid Sensor With Unlimited Cavity Length
resolves10.1109/TIE.2020.2982107
Six-Dimensional Force/Torque Sensor Based on Fiber Bragg Gratings With Low Coupling
resolves10.1109/JSEN.2016.2642145
Paralleled Structure-Based String-Type Fiber Bragg Grating Acceleration Sensor
resolves10.1016/j.sna.2020.112492
A high-temperature resistant photonic crystal fiber sensor with single-side sliding Fabry-Perot cavity for super-large strain measurement
resolves10.1109/LPT.2011.2124452
PCF-Based Fabry–Pérot Interferometric Sensor for Strain Measurement at High Temperatures
resolves10.1364/OE.25.007797
Strain force sensor with ultra-high sensitivity based on fiber inline Fabry-Perot micro-cavity plugged by cantilever taper
resolves10.1117/12.866462
Two-dimensional fibre grating packaging design for simultaneous strain and temperature measurement
resolves10.1016/S0924-4247(02)00188-7
Simultaneous measurement of strain and temperature using a fiber Bragg grating and a thermochromic material
resolves10.1364/OL.22.000790
Interferometric temperature-insensitive strain measurement with different-diameter fiber Bragg gratings
resolves10.1088/0957-0233/22/1/015202
Discriminated measures of strain and temperature in metallic specimen with embedded superimposed long and short fibre Bragg gratings
resolves10.1109/68.531843
Hybrid fiber Bragg grating/long period fiber grating sensor for strain/temperature discrimination
resolves10.1364/OL.20.000333
Simultaneous strain and temperature sensing with photogenerated in-fiber gratings
resolves10.1364/OE.27.020107
Highly stretchable hybrid silica/polymer optical fiber sensors for large-strain and high-temperature application
resolves10.1109/CLEOE-EQEC.2017.8087290
Study of stress relaxation in UV regenerated fiber Bragg gratings
resolves10.1109/LPT.2018.2885337
Simultaneous Measurements of Temperature and Pressure With a Dual-Cavity Fabry–Perot Sensor
resolves10.1088/0964-1726/1/2/004
Optical fiber Fabry-Perot sensors for smart structures
resolves10.1109/JSEN.2019.2928515
Fabry–Perot Curvature Sensor With Cavities Based on UV-Curable Resins: Design, Analysis, and Data Integration Approach
resolves10.1016/j.optlastec.2019.105743
Analysis of viscoelastic properties influence on strain and temperature responses of Fabry-Perot cavities based on UV-curable resins
resolves10.1364/OE.403716
Cascaded Fabry-Perot interferometer-regenerated fiber Bragg grating structure for temperature-strain measurement under extreme temperature conditions
resolves10.1364/AO.31.000431
Fabry–Perot fiber-optic sensors in full-scale fatigue testing on an F-15 aircraft
resolves10.1364/OL.34.002441
Photonic-crystal-fiber-enabled micro-Fabry–Perot interferometer
resolves10.1364/OE.20.007112
Spheroidal Fabry-Perot microcavities in optical fibers for high-sensitivity sensing
resolves10.3390/s19194097
Sensitivity-Enhanced Extrinsic Fabry–Perot Interferometric Fiber-Optic Microcavity Strain Sensor
resolves10.1364/OE.23.007237
High-resolution and fast-response fiber-optic temperature sensor using silicon Fabry-Pérot cavity
resolves10.1364/OE.17.021551
Thermally stabilized PCF-based sensor for temperature measurements up to 1000ºC
resolves10.1109/LPT.2005.857236
Intrinsic Fabry-Pe/spl acute/rot fiber sensor for temperature and strain measurements
resolves10.1364/AO.52.002670
Intrinsic fiber-optic Fabry–Perot interferometer based on arc discharge and single-mode fiber
resolves10.3390/s18010202
High-Temperature Sensor Based on Fabry-Perot Interferometer in Microfiber Tip
resolves10.1016/j.pnsc.2014.05.004
Microstructure heterogeneity and creep damage of DZ125 nickel-based superalloy
The 4 references without a DOI — listed, not checked
no DOI — not checkedStructural Health Monitoring of Civil Infrastructure Using Optical Fiber Sensing Technology: A Comprehensive Review
no DOI — not checkedDvorak, M., Chlup, H., Horny, L., and Ruzicka, M. (2012, January 4–7). Comparison of strain measurement methods: Optical FBG sensors, strain gages & digital image correlation. Proceedings of the 50th Annual Conference on Experimental Stress Analysis, EAN 2012, Tabor, Czechia.
no DOI — not checkedXiao, H., May, R.G., Wang, J., Zhao, W., Deng, J., Zhang, P., and Pickrell, G.R. (2000, January 24–25). Optical fiber sensors for harsh environments. Proceedings of the SPIE-The International Society for Optical Engineering, San Jose, CA USA.
no DOI — not checkedHigh-sensitivity strain sensor based on in-fiber rectangular air bubble
What this badge says. CiteStamped means the CHECKABLE references of this work were clean at the dated check: each resolved to a known work in a public registry, and none carried a retraction notice at that time. It says nothing about the quality, findings, or importance of the work itself, and nothing about references deposited without a DOI.

checked 2026-07-22 — re-checked daily as this page is visited; titles and statuses come from Crossref and DataCite and are not part of the signed record

Embed this badge

Both snippets point at the live badge image and link back to this page. The badge re-renders from the daily check, so an embed never goes stale by more than a day of visits.

<a href="https://citestamp.com/citestamped/10.3390/s21154989"><img src="https://citestamp.com/citestamped/10.3390/s21154989/badge.svg" alt="CiteStamped reference-health badge" width="460" height="64"></a>
[![CiteStamped reference-health badge](https://citestamp.com/citestamped/10.3390/s21154989/badge.svg)](https://citestamp.com/citestamped/10.3390/s21154989)