Reference health
Assessing the Corrosion of Commercially Pure Magnesium and Commercial AZ31B by Electrochemical Impedance, Mass-Loss, Hydrogen Collection, and Inductively Coupled Plasma Optical Emission Spectrometry Solution Analysis
88/88 checkable references clean · checked 2026-08-21
Every reference with a DOI or an arXiv id in the deposited reference list resolved to a known work in Crossref or DataCite at the dated check, and none carried a retraction, withdrawal, or removal notice.
13 with no DOI or arXiv id: not checked. A reference deposited without a DOI is checked only when it names an arXiv id, under that id’s DataCite DOI. The rest are never matched by title or guessed at; they stay outside the checked set, and this line says so.
The 88 checked references that resolve
resolves10.5006/0988
Environmental Degradation of a Mg-Rich Primer in Selected Field and Laboratory Environments: Part 1—Without a Topcoat
resolves10.5006/0989
Environmental Degradation of a Mg-Rich Primer in Selected Field and Laboratory Environments: Part 2—Primer and Topcoat
resolves10.5006/1.3590330
Sacrificial Anode-Based Galvanic and Barrier Corrosion Protection of 2024-T351 by a Mg-Rich Primer and Development of Test Methods for Remaining Life Assessment
resolves10.1007/s11998-004-0001-7
Mg-rich coatings: A new paradigm for Cr-free corrosion protection of Al aerospace alloys
resolves10.1016/j.porgcoat.2008.02.007
Assessment of the corrosion protection of aluminium substrates by a Mg-rich primer: EIS, SVET and SECM study
resolves10.5006/1.3319136
Use of Magnesium Alloys as Pigments in Magnesium-Rich Primers for Protecting Aluminum Alloys
resolves10.1002/(SICI)1527-2648(199909)1:1<11::AID-ADEM11>3.0.CO;2-N
Corrosion Mechanisms of Magnesium Alloys
resolves10.1016/S1471-5317(02)00008-1
The effect of zirconium grain refinement on the corrosion behaviour of magnesium-rare earth alloy MEZ
resolves10.1016/j.jallcom.2008.03.128
Corrosion behaviour of Mg-alloy AZ91E with atypical alloying additions
resolves10.5006/i0010-9312-68-6-489
Localized Corrosion of Binary Mg-Nd Alloys in Chloride-Containing Electrolyte Using a Scanning Vibrating Electrode Technique
resolves10.1179/1743278212Y.0000000051
Self-corrosion, galvanic corrosion and inhibition of GW103 and AZ91D Mg alloys in ethylene glycol solution
resolves10.5006/i0010-9312-68-6-536
Corrosion Behavior of Polypyrrole/AZ91D in Simulated Body Fluid Solutions and Its Functionalization with Albumin Monolayers
resolves10.1149/1.1602080
Local Electrochemical Impedance Spectroscopy Applied to the Corrosion Behavior of an AZ91 Magnesium Alloy
resolves10.1149/1.1415722
AC Impedance Spectroscopy in Characterizing Time-Dependent Corrosion of AZ91 and AM50 Magnesium Alloys Characterization with Respect to Their Microstructures
resolves10.1016/S0010-938X(02)00075-6
Corrosion behaviour of high pressure die-cast and semi-solid cast AZ91D alloys
resolves10.1016/j.jallcom.2007.10.056
Effect of Nd on the microstructure, mechanical properties and corrosion behavior of die-cast Mg–4Al-based alloy
resolves10.1016/j.corsci.2009.03.018
Effect of rare earth element Ce and La on corrosion behavior of AM60 magnesium alloy
resolves10.5006/1.3280536
Polarization Resistance Method for Determination of Instantaneous Corrosion Rates
resolves10.1016/j.corsci.2010.02.038
The anodic dissolution of Mg in NaCl and Na2SO4 electrolytes by atomic emission spectroelectrochemistry
resolves10.1016/j.electacta.2013.07.131
A novel approach to on-line measurement of gas evolution kinetics: Application to the negative difference effect of Mg in chloride solution
resolves10.1016/j.electacta.2013.12.124
Accurate Electrochemical Measurement of Magnesium Corrosion Rates; a Combined Impedance, Mass-Loss and Hydrogen Collection Study
resolves10.1016/j.elecom.2012.10.001
Spatially-resolved imaging of concentration distributions on corroding magnesium-based materials exposed to aqueous environments by SECM
resolves10.1149/2.064403jes
Investigating the Real Time Dissolution of Mg Using Online Analysis by ICP-MS
resolves10.1016/j.electacta.2014.03.133
Evidence for enhanced catalytic activity of magnesium arising from anodic dissolution
resolves10.1016/j.corsci.2010.03.010
The negative difference effect of magnesium and of the AZ91 alloy in chloride and stannate-containing solutions
resolves10.1016/S0010-938X(97)00090-5
The anodic dissolution of magnesium in chloride and sulphate solutions
resolves10.1016/j.corsci.2013.06.032
Corrosion behaviour in salt spray and in 3.5% NaCl solution saturated with Mg(OH)2 of as-cast and solution heat-treated binary Mg–RE alloys: RE=Ce, La, Nd, Y, Gd
resolves10.1016/j.electacta.2011.05.082
Corrosion behaviour of multiwall carbon nanotube/magnesium composites in 3.5% NaCl
resolves10.1016/j.corsci.2012.04.030
Corrosion behaviour of a nominally high purity Mg ingot produced by permanent mould direct chill casting
resolves10.1016/j.corsci.2013.05.018
Corrosion of ultra-high-purity Mg in 3.5% NaCl solution saturated with Mg(OH)2
resolves10.1155/2010/953850
Electrochemical Estimation of the Corrosion Rate of Magnesium/Aluminium Alloys
resolves10.1016/j.corsci.2012.04.043
Electrochemical corrosion properties of CeO2-containing coatings on AZ31 magnesium alloys prepared by plasma electrolytic oxidation
resolves10.1016/S1452-3981(23)16577-1
Enhanced Corrosion Resistance of AZ31B Magnesium Alloy by Cooperation of Rare Earth Cerium and Stannate Conversion Coating
resolves10.1016/j.corsci.2010.09.044
Corrosion behaviour of bulk ultra-fine grained AZ91D magnesium alloy fabricated by equal-channel angular pressing
resolves10.1149/1.2401056
An Impedance Investigation of the Mechanism of Pure Magnesium Corrosion in Sodium Sulfate Solutions
resolves10.1016/S0010-938X(00)00095-0
The corrosion of pure magnesium in aerated and deaerated sodium sulphate solutions
resolves10.5006/1.3292085
Improving Corrosion Resistance of AZ91D Magnesium Alloy by Nitrogen Ion Implantation
resolves10.1149/1.2844433
Electrochemical Behavior Al[sub 2]O[sub 3]∕Al Coated Surgical AZ91 Magnesium Alloy in Simulated Body Fluids
resolves10.1016/S1452-3981(23)15078-4
Electrochemistry and Impedance Studies on Titanium and Magnesium Alloys in Ringer’s Solution
resolves10.1016/j.apsusc.2011.05.014
Effect of the chemistry and structure of the native oxide surface film on the corrosion properties of commercial AZ31 and AZ61 alloys
resolves10.1002/adem.200310405
Understanding Magnesium Corrosion—A Framework for Improved Alloy Performance
resolves10.1016/j.corsci.2010.07.019
The influence of yttrium (Y) on the corrosion of Mg–Y binary alloys
resolves10.1007/s10800-005-9053-3
Electrochemical behaviour of a magnesium alloy containing rare earth elements
resolves10.1016/j.electacta.2013.07.134
The localised corrosion of Mg alloy AZ31 in chloride containing electrolyte studied by a scanning vibrating electrode technique
resolves10.1016/j.electacta.2008.06.001
Influence of microstructure and composition on the corrosion behaviour of Mg/Al alloys in chloride media
resolves10.1016/j.corsci.2012.03.001
Analysis of the surface film formed on Mg by exposure to water using a FIB cross-section and STEM–EDS
resolves10.1361/10599490417533
General and Localized Corrosion of Magnesium Alloys: A Critical Review
resolves10.1002/maco.201206531
Influence of aluminium on the corrosion behaviour of binary magnesium–aluminium alloys in saline solutions
resolves10.1149/1.3523229
Electrochemical Properties of Intermetallic Phases and Common Impurity Elements in Magnesium Alloys
resolves10.1016/j.corsci.2010.03.035
Magnesium secondary alloys: Alloy design for magnesium alloys with improved tolerance limits against impurities
resolves10.1016/j.corsci.2008.12.015
Calculated phase diagrams and the corrosion of die-cast Mg–Al alloys
resolves10.1016/j.corsci.2009.03.014
An exploratory study of the corrosion of Mg alloys during interrupted salt spray testing
resolves10.1016/j.corsci.2010.09.016
An innovative specimen configuration for the study of Mg corrosion
resolves10.1016/j.corsci.2007.11.005
Corrosion behaviour of magnesium/aluminium alloys in 3.5wt.% NaCl
resolves10.1016/j.corsci.2009.10.004
Corrosion behavior of equal-channel-angular-pressed pure magnesium in NaCl aqueous solution
resolves10.1016/j.corsci.2009.10.018
Effect of grain size and twins on corrosion behaviour of AZ31B magnesium alloy
resolves10.1016/j.corsci.2011.12.018
Grain refined and basal textured surface produced by burnishing for improved corrosion performance of AZ31B Mg alloy
resolves10.1016/j.apsusc.2011.02.017
Growth and characterization of Mg(OH)2 film on magnesium alloy AZ31
resolves10.1016/j.matdes.2009.07.049
Corrosion behavior of AZ91 magnesium alloy in dilute NaCl solutions
resolves10.1016/0013-4686(90)87043-2
Investigation of magnesium corrosion in aerated sodium sulfate solution by electrochemical impedance spectroscopy
resolves10.1016/j.electacta.2005.02.144
Electrochemical study on magnesium anodes in NaCl and CaSO4–Mg(OH)2 aqueous solutions
resolves10.1149/1.1837654
Kinetics and Mechanism of the Magnesium Electrode Reaction in Molten MgCl2 ‐ NaCl Binary Mixtures
resolves10.1016/j.corsci.2009.05.005
Local and global electrochemical impedances applied to the corrosion behaviour of an AZ91 magnesium alloy
The 13 references with no DOI or arXiv id, listed, not checked
no DOI — not checked“Blistering Phenomena in Early Generation Mg-Rich Primer Coatings on AA2024-T351 and the Effects of CO2,”
no DOI — not checked“New Developments in Cr-Free Primers for Aerospace Alloys.,”
no DOI — not checked2025031810245020900_i0010-9312-71-2-128-b34
no DOI — not checkedD.A.
Jones
, Principles and Prevention of Corrosion, Prentice Hall Upper Saddle River. NJ. 2nd Ed (1996).
no DOI — not checked“Standard Practice for Preparing, Cleaning, and Evaluating Corrosion Test Specimens”
no DOI — not checked“Standard Practice for Verification of Algorithm and Equipment for Electrochemical Impedance Measurements”
no DOI — not checkedI.J.
Polmear
, Light Alloys: From Traditional Alloys to Nanocrystals4th Edition, Elsevier (2006).
no DOI — not checked“The Corrosion of Magnesium and of the Magnesium Aluminum Alloys Containing Manganese,”
no DOI — not checked2025031810245020900_i0010-9312-71-2-128-b77
no DOI — not checked2025031810245020900_i0010-9312-71-2-128-b78
no DOI — not checkedE.
Gileadi
, Electrode Kinetics for Chemists, Chemical Engineers, and Materials Scientists (New York: Wiley-VCH, 1993).
no DOI — not checked“Standard Specification for Magnesium Alloy Anodes for Cathodic Protection”
no DOI — not checked“Standard Test Method for Laboratory Evaluation of Magnesium Sacrificial Anode Test Specimens for Underground Applications”
What this badge says. CiteStamped means the CHECKABLE references of this
work were clean at the dated check: each resolved to a known work in a public registry, and none
carried a retraction notice at that time. If Crossref’s record marks the work itself
retracted, withdrawn, or removed, the badge says so instead of showing clean. It says nothing
about the quality, findings, or importance of the work itself, and nothing about references
with neither a DOI nor an arXiv id.
checked 2026-08-21 — re-checked at most once a day, when someone opens this page, so the date shown is the last check; titles and statuses come from Crossref and DataCite and are not part of the signed record
Embed this badge
Both snippets point at the live badge image and link back to this page. The badge shows the date of its last check, which runs at most once a day, when someone opens this page.
<a href="https://citestamp.com/citestamped/10.5006/1419"><img src="https://citestamp.com/citestamped/10.5006/1419/badge.svg" alt="CiteStamped reference-health badge" width="460" height="64"></a>
[](https://citestamp.com/citestamped/10.5006/1419)