Reference health

Assessment of Thermal Aging of Austenitic Stainless Steel Weld Metal by Using the Double Loop Electrochemical Potentiokinetic Reactivation Technique

https://doi.org/10.5006/2902
CiteStamped reference-health badge
67/67 checkable references clean · checked 2026-08-21

Every reference with a DOI in the deposited reference list resolved to a known work in Crossref or DataCite at the dated check, and none carried a retraction, withdrawal, or removal notice.

7 without a DOI — not checked. A reference deposited without a DOI is never matched by title or guessed at; it stays outside the checked set, and this line discloses that.

The 67 checked references that resolve
resolves10.1016/0956-7151(91)90118-K
Low temperature aging behavior of type 308 stainless steel weld metal
resolves10.1179/imr.1991.36.1.16
Microstructural development and solidification cracking susceptibility of austenitic stainless steel welds
resolves10.1016/j.corsci.2016.02.030
Stress corrosion cracking in the heat affected zone of a stainless steel 308L-316L weld joint in primary water
resolves10.1016/j.jnucmat.2011.06.004
Study on microstructural changes in thermally-aged stainless steel weld-overlay cladding of nuclear reactor pressure vessels by atom probe tomography
resolves10.1179/mst.1990.6.3.249
Embrittlement of laboratory and reactor aged CF3,CF8, and CF8M duplex stainless steels
resolves10.1016/j.jnucmat.2005.11.008
Mechanical property and microstructural change by thermal aging of SCS14A cast duplex stainless steel
resolves10.1179/mst.1990.6.3.314
Microscopical evaluation of low temperature aging of type 308 stainless steel weldments
resolves10.1016/j.jnucmat.2011.12.004
Microstructural changes of a thermally aged stainless steel submerged arc weld overlay cladding of nuclear reactor pressure vessels
resolves10.5006/1.3279925
Stress Corrosion Cracking Crack Growth Behavior of Type 316L Stainless Steel Weld Metals in Boiling Water Reactor Environments
resolves10.1007/978-3-319-48760-1_54
Effect of Thermal Aging on SCC, Material Properties and Fracture Toughness of Stainless Steel Weld Metals
resolves10.1016/j.msea.2011.11.055
Low temperature thermal aging of austenitic stainless steel welds: Kinetics and effects on mechanical properties
resolves10.1016/j.corsci.2011.09.031
Low temperature thermal ageing embrittlement of austenitic stainless steel welds and its electrochemical assessment
resolves10.1007/s11661-016-3919-3
Aging Degradation of Austenitic Stainless Steel Weld Probed by Electrochemical Method and Impact Toughness Evaluation
resolves10.1016/j.corsci.2012.10.038
Influence of long-term low-temperature aging on the microhardness and corrosion properties of duplex stainless steel
resolves10.1016/S0010-938X(02)00244-5
Aspects of the anodic behaviour of duplex stainless steels aged for long periods at low temperatures
resolves10.1016/0022-3115(96)00361-3
Detection and evaluation of material degradation of thermally aged duplex stainless steels: electrochemical polarization test and AFM surface analysis
resolves10.1016/j.corsci.2006.01.003
Determination of susceptibility to intergranular corrosion and electrochemical reactivation behaviour of AISI 316L type stainless steel
resolves10.5006/1.3581921
The Double Loop Reactivation Method for Detecting Sensitization in AISI 304 Stainless Steels
resolves10.1016/j.electacta.2013.11.044
Experimental Procedures and Sensitization Diagnostics of AISI304 Steel by Double Loop Electrochemical Potentiodynamic Reactivation Method
resolves10.3323/jcorr1974.29.3_142
Intergranular Stress Corrosion Cracking of Sensitized Stainless Steels in BWR Environment
resolves10.1016/S0013-4686(01)00674-0
On the development of the electrochemical potentiokinetic method
resolves10.4028/www.scientific.net/KEM.261-263.855
Electrochemical Potentiodynamic Reactivation: Development and Applications of the EPR Test
resolves10.1007/s10853-005-5699-9
Sensitization evaluation of the austenitic stainless steel AISI 304L, 316L, 321 and 347
resolves10.1016/j.corsci.2007.07.014
Determination of the sensitized zone extension in welded AISI 304 stainless steel using non-destructive electrochemical techniques
resolves10.1590/1516-1439.345414
Effects of Thermal Aging on Microstructure and Corrosion Resistance of AISI 317L Steel Weld Metal in the FSW Process
resolves10.1007/s11665-016-2221-2
Intergranular Corrosion Behavior of Low-Nickel and 304 Austenitic Stainless Steels
resolves10.5006/1.3583064
An Electrochemical Test For Detecting the Intergranular Corrosion Susceptibility of a Duplex Stainless Steel
resolves10.1016/S0010-938X(99)00009-8
Influence of o-phase on mechanical properties and corrosion resistance of duplex stainless steels
resolves10.1016/j.corsci.2011.07.013
Characterisation of duplex stainless steel subjected to long-term annealing in the sigma phase formation temperature range by the DLEPR test
resolves10.1016/j.corsci.2013.04.050
Practical aspects on the use of on-site Double Loop Electrochemical Potentiodynamic Reactivation Technique (DL-EPR) for Duplex Stainless Steel
resolves10.1016/j.corsci.2014.06.004
Influence of multipass pulsed gas metal arc welding on corrosion behaviour of a duplex stainless steel
resolves10.5006/1681
Magnetic and Electrochemical Techniques as Tools to Detect Deleterious Phases in Duplex Stainless Steels
resolves10.1007/s11661-016-3584-6
Effects of Thermal Aging on Material Properties, Stress Corrosion Cracking, and Fracture Toughness of AISI 316L Weld Metal
resolves10.1016/j.msea.2010.02.069
Low temperature embrittlement of duplex stainless steel: Correlation between mechanical and electrochemical behavior
resolves10.1016/j.corsci.2011.10.027
Corrosion resistance of duplex stainless steel subjected to long-term annealing in the spinodal decomposition temperature range
resolves10.1016/S0022-3115(96)00459-X
Quantitative evaluation of material degradation of thermally aged duplex stainless steels using chemical immersion test
resolves10.5006/1.3585062
Galvanic Effects on the Active Dissolution of Duplex Stainless Steels
resolves10.1111/j.1151-2916.1998.tb02379.x
Quantitative Comparison of Transmission Electron Microscopy Techniques for the Study of Localized Ordering on a Nanoscale
resolves10.1080/01614949208021920
The Study of Heterogeneous Catalysts by High-Resolution Transmission Electron MicroscoDV
resolves10.1557/JMR.1992.1564
An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments
resolves10.1557/jmr.2004.19.1.3
Measurement of hardness and elastic modulus by instrumented indentation: Advances in understanding and refinements to methodology
resolves10.1016/0308-0161(92)90037-G
Aging and life prediction of cast duplex stainless steel components
resolves10.1016/j.msea.2012.04.105
Effect of long-term thermal aging on the mechanical properties of casting duplex stainless steels
resolves10.1016/j.matdes.2013.12.010
The effects of reversion heat treatment on the recovery of thermal aging embrittlement of CF8M cast stainless steels
resolves10.1016/j.msea.2003.12.051
The low-temperature aging embrittlement in a 2205 duplex stainless steel
resolves10.1016/j.jnucmat.2014.05.069
G-phase precipitation in duplex stainless steels after long-term thermal aging: A high-resolution transmission electron microscopy study
resolves10.5006/1.3315992
Modified Electrochemical Potentiokinetic Reactivation Method for Detecting Sensitization in 12 wt% Cr Ferritic Stainless Steels
resolves10.1007/BF02664809
Microstructural origin of the skeletal ferrite morphology of austenitic stainless steel welds
resolves10.1179/030634584790419908
Ferrite decomposition in austenitic stainless steel weld metals
resolves10.1016/0169-4332(95)00497-1
Comparison of low temperature decomposition in FeCr and duplex stainless steels
resolves10.1016/S1044-5803(99)00048-0
Atom Probe Studies of the Fe–Cr System and Stainless Steels Aged at Intermediate Temperature
resolves10.1007/BF02458901
Spinodal decomposition of Fe−Cr−Ni alloys studied by Mössbauer spectroscopy
resolves10.1016/j.actamat.2016.06.013
The two-step nucleation of G-phase in ferrite
resolves10.1051/mmm:0199400502012100
A 3D study of G-phase precipitation in spinodally decomposed α-ferrite by tomographic atom-probe analysis
resolves10.1016/j.jnucmat.2015.06.017
Kinetics of G-phase precipitation and spinodal decomposition in very long aged ferrite of a Mo-free duplex stainless steel
resolves10.1016/j.actamat.2014.12.012
Assessment of thermal embrittlement in duplex stainless steels 2003 and 2205 for nuclear power applications
resolves10.1016/j.actamat.2017.08.044
Non-uniform phase separation in ferrite of a duplex stainless steel
resolves10.1016/j.corsci.2004.06.012
Effect of “475 °C embrittlement” on duplex stainless steels localized corrosion resistance
resolves10.5006/1.3583863
Polarization Behavior of Austenitic and Duplex Stainless Steels in the Double Loop Reactivation Test
resolves10.1016/0010-938X(84)90027-1
Evaluation of martensite-austenitic stainless steels from the full and incomplete passivity by potentiokinetic method
resolves10.1016/j.jnucmat.2011.01.036
Study of phase transformation and mechanical properties evolution of duplex stainless steels after long term thermal ageing (>20 years)
resolves10.1179/mst.1990.6.3.211
Aging kinetics of CF3 cast stainless steel in temperature range 300–400°C
resolves10.1179/mst.1990.6.3.237
Aging effects in welded cast CF3 stainless steel
resolves10.1520/JTE11473J
Low-Temperature Aging Kinetics in Cast Duplex Stainless Steels: Experimental Characterization
resolves10.1016/j.jnucmat.2014.04.003
Effects of thermal aging on microstructure and hardness of stainless steel weld-overlay claddings of nuclear reactor pressure vessels
resolves10.1103/PhysRevA.11.1417
New computational method in the theory of spinodal decomposition
resolves10.1017/S1431927604040516
Hardening of Aged Duplex Stainless Steels by Spinodal Decomposition
The 7 references without a DOI — listed, not checked
no DOI — not checked2025031810393968100_i0010-9312-75-4-2902-r18
no DOI — not checked2025031810393968100_i0010-9312-75-4-2902-r22
no DOI — not checked“Non-Destructive Evaluation of Thermal Aging Embrittlement of Duplex Stainless Steels,”
no DOI — not checked2025031810393968100_i0010-9312-75-4-2902-r39
no DOI — not checked“Standard Test Method for Determining Volume Fraction by Systematic Manual Point Count,”
no DOI — not checked2025031810393968100_i0010-9312-75-4-2902-r45
no DOI — not checked2025031810393968100_i0010-9312-75-4-2902-r54
What this badge says. CiteStamped means the CHECKABLE references of this work were clean at the dated check: each resolved to a known work in a public registry, and none carried a retraction notice at that time. It says nothing about the quality, findings, or importance of the work itself, and nothing about references deposited without a DOI.

checked 2026-08-21 — re-checked daily as this page is visited; titles and statuses come from Crossref and DataCite and are not part of the signed record

Embed this badge

Both snippets point at the live badge image and link back to this page. The badge re-renders from the daily check, so an embed never goes stale by more than a day of visits.

<a href="https://citestamp.com/citestamped/10.5006/2902"><img src="https://citestamp.com/citestamped/10.5006/2902/badge.svg" alt="CiteStamped reference-health badge" width="460" height="64"></a>
[![CiteStamped reference-health badge](https://citestamp.com/citestamped/10.5006/2902/badge.svg)](https://citestamp.com/citestamped/10.5006/2902)