Reference health
Grain size effect on piezoelectric performance in perovskite-based piezoceramics
187/187 checkable references clean · checked 2026-08-12
Every reference with a DOI or an arXiv id in the deposited reference list resolved to a known work in Crossref or DataCite at the dated check, and none carried a retraction, withdrawal, or removal notice.
12 with no DOI or arXiv id: not checked. A reference deposited without a DOI is checked only when it names an arXiv id, under that id’s DataCite DOI. The rest are never matched by title or guessed at; they stay outside the checked set, and this line says so.
The 187 checked references that resolve
resolves10.1016/j.mattod.2019.04.016
Technology transfer of lead-free (K, Na)NbO3-based piezoelectric ceramics
resolves10.1016/j.jmat.2018.02.001
Requirements for the transfer of lead-free piezoceramics into application
resolves10.6028/jres.055.028
Properties of piezoelectric ceramics in the solid-solution series lead titanate-lead zirconate-lead oxide: Tin oxide and lead titanate-lead hafnate
resolves10.1016/j.jeurceramsoc.2014.12.013
Transferring lead-free piezoelectric ceramics into application
resolves10.1021/cr5006809
Potassium–Sodium Niobate Lead-Free Piezoelectric Materials: Past, Present, and Future of Phase Boundaries
resolves10.1016/j.pmatsci.2018.06.002
Recent development in lead-free perovskite piezoelectric bulk materials
resolves10.1039/C9TC00476A
Review of chemical modification on potassium sodium niobate lead-free piezoelectrics
resolves10.1039/C8EE02758G
High-performance lead-free piezoelectrics with local structural heterogeneity
resolves10.1093/nsr/nwz167
Practical high-performance lead-free piezoelectrics: structural flexibility beyond utilizing multiphase coexistence
resolves10.1002/adma.201503768
Giant Strains in Non‐Textured (Bi<sub>1/2</sub>Na<sub>1/2</sub>)TiO<sub>3</sub>‐Based Lead‐Free Ceramics
resolves10.1111/j.1551-2916.2012.05462.x
High Power Characteristics of Lead‐Free Piezoelectric Ceramics
resolves10.1007/s00170-003-1872-y
Embedded components in printed circuit boards: a processing technology review
resolves10.1016/j.powtec.2016.01.030
A brief review of the effect of grain size variation on the electrical properties of BaTiO3-based ceramics
resolves10.1111/j.1151-2916.1998.tb02389.x
Intrinsic and Extrinsic Size Effects in Fine‐Grained Morphotropic‐Phase‐Boundary Lead Zirconate Titanate Ceramics
resolves10.1016/j.ceramint.2018.12.039
Effect of grain size on piezoelectric, ferroelectric and dielectric properties of PMN-PT ceramics
resolves10.1016/j.jeurceramsoc.2013.11.030
Grain size effect on piezoelectric and ferroelectric properties of BaTiO3 ceramics
resolves10.2109/jcersj.114.97
High-Quality Lead-Free Ferroelectric Ceramics Prepared from the Flash-Creation-Method-Derived Nanopowder
resolves10.1111/j.1151-2916.1996.tb08547.x
Effect of Crystallite Size on the Ferroelectric Domain Growth of Ultrafine BaTiO
<sub>3</sub>
Powders
resolves10.1143/JJAP.50.09NC13
Structural Characterization of Na<sub>0.5</sub>K<sub>0.5</sub>NbO<sub>3</sub> Ceramic Particles Classified by Centrifugal Separator
resolves10.1016/j.physb.2009.08.299
Influence of ball milling parameters on the particle size of barium titanate nanocrystalline powders
resolves10.1016/S0022-0248(00)00619-9
Hydrothermal synthesis and structural characterization of BaTiO3 nanocrystals
resolves10.4028/www.scientific.net/KEM.301.219
Synthesis and Characterization of Barium Titanate Nano-Powders by the Hydrothermal Process
resolves10.1111/j.1151-2916.2000.tb01606.x
Solvothermal Synthesis and Characterization of Barium Titanate Powders
resolves10.1111/j.1151-2916.1969.tb09157.x
Preparation of High‐Purity Submicron Barium Titanate Powders
resolves10.1111/j.1551-2916.2006.01144.x
Preparation, Processing, and Characterization of Nano‐Crystalline BaTiO
<sub>3</sub>
Powders and Ceramics Derived from Microemulsion‐Mediated Synthesis
resolves10.1111/j.1551-2916.2007.02098.x
Synthesis of Highly Dispersed Barium Titanate Nanoparticles by a Novel Solvothermal Method
resolves10.1016/S0955-2219(99)00150-8
Low-temperature aqueous synthesis (LTAS) of BaTiO3: a statistical design of experiment approach
resolves10.1023/A:1004849502389
Synthesis of nm-sized barium titanate crystallites using a new LTDS method and their characterization
resolves10.1021/ja063011m
Room-Temperature Biosynthesis of Ferroelectric Barium Titanate Nanoparticles
resolves10.1002/adma.200501340
Room Temperature Synthesis of Ferroelectric Barium Titanate Nanoparticles Using Peptide Nanorings as Templates
resolves10.1016/j.actamat.2012.06.015
Grain-size effects on dielectric and piezoelectric properties of poled BaTiO3 ceramics
resolves10.1016/j.jeurceramsoc.2006.02.005
Grain size and grain boundary-related effects on the properties of nanocrystalline barium titanate ceramics
resolves10.1039/C9TC01715A
Influence of trace zirconia addition on the properties of (K,Na)NbO
<sub>3</sub>
solid solutions
resolves10.1063/1.2363930
Phase transition and high dielectric constant of bulk dense nanograin barium titanate ceramics
resolves10.1039/C4DT01712A
Two-step sintering of new potassium sodium niobate ceramics: a high d
<sub>33</sub>
and wide sintering temperature range
resolves10.1002/aelm.201900570
A Study on the Relationship Between Grain Size and Electrical Properties in (K,Na)NbO<sub>3</sub>‐Based Lead‐Free Piezoelectric Ceramics
resolves10.1080/00150197408237979
Grain-size and pressure effects on the dielectric and piezoelectric properties of hot-pressed PZT-5
resolves10.2109/jcersj2.121.655
Piezoelectric properties of BaTiO<sub>3</sub> ceramics prepared by hot isostatic pressing
resolves10.1080/00150193.2014.891419
Dielectric and Electromechanical Properties of BaTiO<sub>3</sub>Ceramics Prepared by Hot Isostatic Pressing
resolves10.1111/j.1151-2916.2000.tb01303.x
Properties of Modified Lead Zirconate Titanate Ceramics Prepared at Low Temperature (800°C) by Hot Isostatic Pressing
resolves10.1080/00150193.2015.1071610
Dielectric and Electromechanical Properties of (K,Na)NbO<sub>3</sub>Ceramics Prepared by Hot Isostatic Pressing
resolves10.1143/JJAP.45.L30
Lead-Free Barium Titanate Ceramics with Large Piezoelectric Constant Fabricated by Microwave Sintering
resolves10.1007/s10832-014-9951-z
Improvement of piezoelectric and ferroelectric properties in (K,Na)NbO3- based ceramics via microwave sintering
resolves10.1111/j.1551-2916.2005.00836.x
Phase Transitions in Nanocrystalline Barium Titanate Ceramics Prepared by Spark Plasma Sintering
resolves10.1016/S0272-8842(03)00124-X
Fabrication and characteristics of fine-grained BaTiO3 ceramics by spark plasma sintering
resolves10.1111/j.1551-2916.2005.00601.x
Effects of Preparation Conditions on the Structural and Optical Properties of Spark Plasma‐Sintered PLZT (8/65/35) Ceramics
resolves10.1111/j.1551-2916.2009.03542.x
Electrical and Mechanical Properties of Fine‐Grained Li/Ta‐Modified (Na,K)NbO
<sub>3</sub>
‐Based Piezoceramics Prepared by Spark Plasma Sintering
resolves10.1016/j.mseb.2011.05.051
Spark plasma sintering of Li/Ta-modified (K,Na)NbO3 lead-free piezoelectric ceramics: Post-annealing temperature effect on phase structure, electrical properties and grain growth behavior
resolves10.1016/j.jeurceramsoc.2014.04.041
Field-assisted sintering of undoped BaTiO3: Microstructure evolution and dielectric permittivity
resolves10.1016/j.ceramint.2018.11.139
Flash sintering of lead zirconate titanate ceramics under an alternating current electrical field
resolves10.1016/j.jeurceramsoc.2018.04.007
Flash sintering of lead zirconate titanate (PZT) ceramics: Influence of electrical field and current limit on densification and grain growth
resolves10.1039/C9TC03117K
Mechanism of densification in low-temperature FLASH sintered lead free potassium sodium niobate (KNN) piezoelectrics
resolves10.1111/j.1151-2916.1985.tb11519.x
Structural Dependence on Sintering Temperature of Lead Zirconate‐Titanate Solid Solutions
resolves10.1016/S0955-2219(03)00197-3
Effect of sintering temperature on microstructure of hydrothermally prepared bismuth sodium titanate ceramics
resolves10.1016/j.materresbull.2006.11.043
Influence of sintering temperature on piezoelectric properties of (K0.5Na0.5)NbO3–LiNbO3 lead-free piezoelectric ceramics
resolves10.1016/j.matchemphys.2010.03.065
Role of sintering time, crystalline phases and symmetry in the piezoelectric properties of lead-free KNN-modified ceramics
resolves10.1039/C5RA11874C
Vapour pressure and mixing thermodynamic properties of the KNbO
<sub>3</sub>
–NaNbO
<sub>3</sub>
system
resolves10.1103/PhysRevB.74.134115
Size effect on the dielectric properties of<mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML" display="inline"><mml:mrow><mml:msub><mml:mi>BaTiO</mml:mi><mml:mn>3</mml:mn></mml:msub></mml:mrow></mml:math>nanoceramics in a modified Ginsburg-Landau-Devonshire thermodynamic theory
resolves10.1111/j.1151-2916.1966.tb13144.x
Phenomenological Theory of High Permittivity in Fine‐Grained Barium Titanate
resolves10.1063/1.3526375
Grain size effect on the nonlinear dielectric properties of barium titanate ceramics
resolves10.1063/1.2360244
Observation of ferroelectric domain patterns in nanocrystalline BaTiO3 ceramics
resolves10.1143/JJAP.46.7039
Preparation of [110] Grain Oriented Barium Titanate Ceramics by Templated Grain Growth Method and Their Piezoelectric Properties
resolves10.2109/jcersj2.118.940
Enhancement of piezoelectric constant d33 in BaTiO3 ceramics due to nano-domain structure
resolves10.2109/jcersj2.17257
Effect of powder size in BiFeO<sub>3</sub>-based piezoelectric ceramics fabricated by spark plasma sintering
resolves10.1143/JJAP.46.7035
Barium Titanate Piezoelectric Ceramics Manufactured by Two-Step Sintering
resolves10.1143/APEX.1.111402
Subgrain Microstructure in High-Performance BaTiO<sub>3</sub>Piezoelectric Ceramics
resolves10.1016/j.jeurceramsoc.2011.11.014
Phase structure and nano-domain in high performance of BaTiO3 piezoelectric ceramics
resolves10.1088/0022-3727/41/12/125408
High piezoelectric properties and domain configuration in BaTiO<sub>3</sub>ceramics obtained through the solid-state reaction route
resolves10.1103/PhysRevB.70.024107
Grain-size effects on the ferroelectric behavior of dense nanocrystalline<mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML" display="inline"><mml:mrow><mml:msub><mml:mrow><mml:mi mathvariant="normal">BaTiO</mml:mi></mml:mrow><mml:mn>3</mml:mn></mml:msub></mml:mrow></mml:math>ceramics
resolves10.1002/adfm.201470042
Ferroelectric Materials: Domain Wall Displacement is the Origin of Superior Permittivity and Piezoelectricity in BaTiO<sub>3</sub> at Intermediate Grain Sizes (Adv. Funct. Mater. 7/2014)
resolves10.1002/pssa.201431233
Enhancement of electric field-induced strain in BaTiO<sub>3</sub>ceramics through grain size optimization
resolves10.1007/s10832-012-9742-3
Giant electric-field-induced strains in lead-free ceramics for actuator applications – status and perspective
resolves10.1080/00150199808009168
The role of interfaces on an apparent grain size effect on the dielectric properties for ferroelectric barium titanate ceramics
resolves10.1080/00150190390211972
Preparation and Size Effect in Pure Nanocrystalline Barium Titanate Ceramics
resolves10.1143/JJAP.46.L97
Lead-Free Piezoelectric Ceramics with Large Dielectric and Piezoelectric Constants Manufactured from BaTiO<sub>3</sub> Nano-Powder
resolves10.1143/JJAP.48.09KC01
Domain Contribution to Dielectric Properties of Fine-Grained BaTiO<sub>3</sub>Ceramics
resolves10.1080/00150191003697377
Effect of Grain Size of BaTiO<sub>3</sub>Ceramics on Dielectric Properties
resolves10.1111/j.1551-2916.2012.05409.x
Grain Size‐Dependent Properties of Dense Nanocrystalline Barium Titanate Ceramics
resolves10.1007/s10854-016-4518-1
Grain size effects on piezoelectric properties of BaTiO3 ceramics prepared by spark plasma sintering
resolves10.1007/s10854-017-7158-1
Enhanced grain size effect on electrical characteristics of fine-grained BaTiO3 ceramics
resolves10.1143/JJAP.45.7405
Piezoelectric Properties of BaTiO<sub>3</sub> Ceramics with High Performance Fabricated by Microwave Sintering
resolves10.1111/jace.12601
Grain Size Effects on Piezoelectric Properties and Domain Structure of
<scp>
<scp>BaTiO</scp>
</scp>
<sub>3</sub>
Ceramics Prepared by Two‐Step Sintering
resolves10.1007/s40145-015-0130-8
Effect of grain size on dielectric and ferroelectric properties of nanostructured Ba0.8Sr0.2TiO3 ceramics
resolves10.1007/s10854-017-6494-5
Piezoelectric grain-size effects of BaTiO3 ceramics under different sintering atmospheres
resolves10.1016/j.jeurceramsoc.2018.05.011
Direct and converse piezoelectric grain-size effects in BaTiO3 ceramics with different Ba/Ti ratios
resolves10.1088/1361-665X/26/1/015013
Effect of grain size on the domain structures and electromechanical responses of ferroelectric polycrystal
resolves10.2109/jcersj2.17260
Grain-size dependence of piezoelectric properties in thermally annealed BaTiO<sub>3</sub> ceramics
resolves10.1063/1.367097
The effect of grain and particle size on the microwave properties of barium titanate (BaTiO3)
resolves10.1016/j.jeurceramsoc.2019.01.041
On the origin of grain size effects in Ba(Ti0.96Sn0.04)O3 perovskite ceramics
resolves10.7567/1347-4065/ab3b1c
Influence of grain size effect and Ba/Ti ratios on dielectric, ferroelectric, and piezoelectric properties of BaTiO
<sub>3</sub>
ceramics
resolves10.1021/jacs.8b07844
Practical High Piezoelectricity in Barium Titanate Ceramics Utilizing Multiphase Convergence with Broad Structural Flexibility
resolves10.1209/0295-5075/98/27008
Large piezoelectricity and dielectric permittivity in BaTiO
<sub>3</sub>
-xBaSnO
<sub>3</sub>
system: The role of phase coexisting
resolves10.1063/1.4826933
High piezoelectricity due to multiphase coexistence in low-temperature sintered (Ba,Ca)(Ti,Sn)O3–CuO<i>x</i> ceramics
resolves10.1111/jace.12038
Enhanced Piezoelectric Properties of (
<scp>
<scp>Ba</scp>
</scp>
<sub>
1−
<i>x</i>
</sub>
<scp>
<scp>Ca</scp>
</scp>
<sub>
<i>x</i>
</sub>
)(
<scp>
<scp>Ti</scp>
</scp>
<sub>0.92</sub>
<scp>
<scp>Sn</scp>
</scp>
<sub>0.08</sub>
)
<scp>
<scp>O</scp>
</scp>
<sub>3</sub>
Lead‐Free Ceramics
resolves10.1016/j.ceramint.2015.09.035
Piezoelectric and ferroelectric properties of (Ba,Ca)(Ti,Sn)O 3 lead-free ceramics sintered with Li 2 O additives: Analysis of point defects and phase structures
resolves10.1016/j.jeurceramsoc.2015.11.039
Large piezoelectric effect of (Ba,Ca)TiO3–xBa(Sn,Ti)O3 lead-free ceramics
resolves10.1103/PhysRevB.92.224112
Relaxor ferroelectricity and electric-field-driven structural transformation in the giant lead-free piezoelectric<mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"><mml:mrow><mml:mrow><mml:mo>(</mml:mo><mml:mi>Ba</mml:mi><mml:mo>,</mml:mo><mml:mi>Ca</mml:mi><mml:mo>)</mml:mo></mml:mrow><mml:mrow><mml:mo>(</mml:mo><mml:mrow><mml:mi>Ti</mml:mi><mml:mo>,</mml:mo><mml:mspace width="0.16em"/><mml:mi>Zr</mml:mi></mml:mrow><mml:mo>)</mml:mo></mml:mrow><mml:msub><mml:mi mathvariant="normal">O</mml:mi><mml:mn>3</mml:mn></mml:msub></mml:mrow></mml:math>
resolves10.1111/j.1151-2916.1969.tb09178.x
Lead Zirconate‐Lead Titanate Piezoelectric Ceramics with Iron Oxide Additions
resolves10.1111/j.1151-2916.1973.tb12363.x
Effects of Grain Size and Porosity on Electrical and Optical Properties of PLZT Ceramics
resolves10.1143/JJAP.30.2220
Preparation and Properties of Lead Zirconate-Titanate Piezoelectric Ceramics Using Ultrafine Particles
resolves10.1007/BF00543660
Fabrication of fine-grain piezoelectric ceramics using reactive calcination
resolves10.1111/j.1151-2916.1995.tb07978.x
Influence of Grain Size on Ferroelastic Toughening and Piezoelectric Behavior of Lead Zirconate Titanate
resolves10.1007/BF01132962
Effect of dopants on the microstructure and lattice parameters of lead zirconate-titanate ceramics
resolves10.1016/j.ceramint.2009.09.022
Effects of sintering behavior on microstructure and piezoelectric properties of porous PZT ceramics
resolves10.1016/j.ceramint.2013.07.110
Effects of sintering behavior on piezoelectric properties of porous PZT ceramics
resolves10.1063/1.2207738
Nonlinear contributions to the dielectric permittivity and converse piezoelectric coefficient in piezoelectric ceramics
resolves10.1016/S1359-6454(01)00025-8
Correlation between microstructure, strain behavior, and acoustic emission of soft PZT ceramics
resolves10.1088/0953-8984/9/23/018
Contribution of the irreversible displacement of domain walls to the piezoelectric effect in barium titanate and lead zirconate titanate ceramics
resolves10.1103/PhysRev.70.965
Theory of the Structure of Ferromagnetic Domains in Films and Small Particles
resolves10.1016/0022-3697(96)00019-4
Grain size and domain size relations in bulk ceramic ferroelectric materials
resolves10.1002/adfm.201302457
Influence of a Single Grain Boundary on Domain Wall Motion in Ferroelectrics
resolves10.1088/0957-4484/18/46/465502
Nanoscale domain switching behaviour in polycrystalline ferroelectric thin films
resolves10.1016/j.jeurceramsoc.2020.03.054
Domain wall-grain boundary interactions in polycrystalline Pb(Zr0.7Ti0.3)O3 piezoceramics
resolves10.1063/1.4860335
Statistical electric field and switching time distributions in PZT 1Nb2Sr ceramics: Crystal- and microstructure effects
resolves10.1111/j.1551-2916.2012.05099.x
High Speed
<scp>SPM</scp>
Applied for Direct Nanoscale Mapping of the Influence of Defects on Ferroelectric Switching Dynamics
resolves10.1016/0924-4247(96)80160-9
Instabilities in the piezoelectric properties of ferroelectric ceramics
resolves10.1007/BF02385646
Effect of sintering parameters on the microstructure and properties of strontium modified PZT ceramics prepared using spray-dried powders
resolves10.1103/PhysRevMaterials.4.064407
Origin of high electromechanical properties in
<mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"><mml:mrow><mml:mrow><mml:mo>(</mml:mo><mml:mi mathvariant="normal">K</mml:mi><mml:mo>,</mml:mo><mml:mi>Na</mml:mi><mml:mo>)</mml:mo></mml:mrow><mml:msub><mml:mi>NbO</mml:mi><mml:mn>3</mml:mn></mml:msub></mml:mrow></mml:math>
-based lead-free piezoelectrics modified with
<mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"><mml:mrow><mml:mi>BaZr</mml:mi><mml:msub><mml:mi mathvariant="normal">O</mml:mi><mml:mn>3</mml:mn></mml:msub></mml:mrow></mml:math>
resolves10.1016/j.jeurceramsoc.2016.12.053
Donor doping of K 0.5 Na 0.5 NbO 3 ceramics with strontium and its implications to grain size, phase composition and crystal structure
resolves10.1039/C6TA04107H
Significantly enhanced recoverable energy storage density in potassium–sodium niobate-based lead free ceramics
resolves10.1557/JMR.2004.0229
New lead-free relaxors based on the K<sub>0.5</sub>Na<sub>0.5</sub>NbO<sub>3</sub>–SrTiO<sub>3</sub> solid solution
resolves10.1016/j.materresbull.2004.05.007
Fabrication and characterization of potassium–sodium niobate piezoelectric ceramics by spark-plasma-sintering method
resolves10.1111/j.1551-2916.2010.03578.x
Influence of Alkaline and Niobium Excess on Sintering and Microstructure of Sodium‐Potassium Niobate (K
<sub>0.5</sub>
Na
<sub>0.5</sub>
)NbO
<sub>3</sub>
resolves10.1111/j.1551-2916.2011.04510.x
Ferroelectric Domain Structures and Electrical Properties of Fine‐Grained Lead‐Free Sodium Potassium Niobate Ceramics
resolves10.1143/JJAP.51.09LD06
Grain-Size-Controlled (Li,Na,K)NbO<sub>3</sub> Ceramics Using Powder Source Classified by Centrifugal Separator
resolves10.1111/j.1151-2916.1967.tb15121.x
Properties of Hot‐Pressed Ferroelectric Alkali Niobate Ceramics
resolves10.1111/j.1551-2916.2010.04085.x
Two‐Step Sintering: An Approach to Broaden the Sintering Temperature Range of Alkaline Niobate‐Based Lead‐Free Piezoceramics
resolves10.1111/jace.13373
Domain Structure of Potassium‐Sodium Niobate Ceramics Before and After Poling
resolves10.1063/1.4975341
Dielectric relaxation and charged domain walls in (K,Na)NbO3-based ferroelectric ceramics
resolves10.1039/C8TC05253K
Grain configuration effect on the phase transition, piezoelectric strain and temperature stability of KNN-based ceramics
resolves10.1143/JJAP.47.7702
A Shear-Mode Ultrasonic Motor Using Potassium Sodium Niobate-Based Ceramics with High Mechanical Quality Factor
resolves10.1016/j.jeurceramsoc.2009.01.003
Dielectric and piezoelectric properties of Cu2+-doped alkali Niobates
resolves10.1016/j.jeurceramsoc.2017.01.013
Hardening behavior and highly enhanced mechanical quality factor in (K 0.5 Na 0.5 )NbO 3 –based ceramics
resolves10.1111/j.1551-2916.2007.01977.x
Abnormal Grain Growth and New Core–Shell Structure in (K,Na)NbO
<sub>3</sub>
‐Based Lead‐Free Piezoelectric Ceramics
resolves10.1016/j.jeurceramsoc.2009.02.006
Microstructural changes in (K0.5Na0.5)NbO3 ceramics sintered in various atmospheres
resolves10.1111/jace.16070
Abnormal grain growth in (K, Na)NbO
<sub>3</sub>
‐based lead‐free piezoceramic powders
resolves10.1016/j.actamat.2019.01.012
The impact of chemical heterogeneity in lead-free (K, Na)NbO3 piezoelectric perovskite: Ferroelectric phase coexistence
resolves10.1038/s41598-019-56389-9
Suppression of abnormal grain growth in K0.5Na0.5NbO3: phase transitions and compatibility
resolves10.1063/1.373089
Background oxygen effects on pulsed laser deposited Na0.5K0.5NbO3 films: From superparaelectric state to ferroelectricity
resolves10.1143/JJAP.47.3787
Current Developments and Prospective of Lead-Free Piezoelectric Ceramics
resolves10.1016/S0955-2219(01)00005-X
Additive effects on electrical properties of (Bi1/2Na1/2)TiO3 ferroelectric ceramics
resolves10.1111/j.1151-2916.2002.tb00570.x
Dependence of the Microstructure and the Electrical Properties of Lanthanum‐Substituted (Na
<sub>1/2</sub>
Bi
<sub>1/2</sub>
)TiO
<sub>3</sub>
on Cation Vacancies
resolves10.1016/j.jeurceramsoc.2014.04.040
Solid state synthesis and sintering of solid solutions of BNT–xBKT
resolves10.1016/j.jeurceramsoc.2016.11.045
The effect of A site non-stoichiometry on 0.94(NayBix)TiO3-0.06BaTiO3
resolves10.1111/j.1551-2916.2008.02469.x
Enhancing Electrical Properties in NBT–KBT Lead‐Free Piezoelectric Ceramics by Optimizing Sintering Temperature
resolves10.1016/j.jeurceramsoc.2012.02.021
Structural, dielectric, and piezoelectric properties of fine-grained NBT–BT0.11 ceramic derived from gel precursor
resolves10.1016/j.jeurceramsoc.2019.03.050
Electromechanical properties of flash sintered BNT-based piezoelectric ceramic
resolves10.1016/j.jeurceramsoc.2017.02.048
NaNbO 3 templates-induced phase evolution and enhancement of electromechanical properties in <00l> grain oriented lead-free BNT-based piezoelectric materials
resolves10.1111/jace.16853
Giant electro‐strain in textured Li
<sup>+</sup>
‐doped 0.852BNT–0.11BKT–0.038BT ternary lead‐free piezoelectric ceramics
resolves10.1016/j.actamat.2018.10.029
Grain size dependent physical properties in lead-free multifunctional piezoceramics: A case study of NBT-xST system
resolves10.1016/j.jeurceramsoc.2016.04.024
Grain size dependent electrostrain in Bi1/2Na1/2TiO3-SrTiO3 incipient piezoceramics
resolves10.1016/j.actamat.2017.05.068
Anomalous influence of grain size on the global structure, ferroelectric and piezoelectric response of Na 0.5 Bi 0.5 TiO 3
resolves10.1016/j.scriptamat.2015.09.011
Isothermal grain growth and effect of grain size on piezoelectric constant of Na0.5Bi0.5TiO3 ceramics
The 12 references with no DOI or arXiv id, listed, not checked
no DOI — not checkedEU-Directive 2002/95/EC, European Commision, (2003), <a href="https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX%3 A32002 L0095">https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX%3 A32002 L0095</a>
no DOI — not checkedKniekamp H, Heywang W 1954 <i>Z. Angew. Phys</i> <b>6</b> 385
no DOI — not checkedMen T L, Yao F Z, Zhu Z X, Wang K, Li J F 2016 <i>J. Adv. Dielectr.</i> <b>6</b> 1650013
no DOI — not checkedRahaman M N 2003 <i>Ceramic Processing and Sintering</i> (CRC Press)
no DOI — not checkedGuo H F, Zhang X T, Liu B, Li Y C, Huang Y B, Du Z L 2004 <i>Acta Physico-chimica Sinica</i> <b>20</b> 113<br/>郭惠芬, 张兴堂, 刘兵, 李蕴才, 黄亚彬, 杜祖亮 2004 物理化学学报 <b>20</b> 113
no DOI — not checkedLi J F, Wang K, Zhang B P, Zhang L M 2006 <i>J. Am. Ceram. Soc.</i> <b>89</b> 706
no DOI — not checkedStojanovic B 2018 <i>Magnetic, Ferroelectric, and Multiferroic Metal Oxides</i> (Elsevier)
no DOI — not checkedHao J, Bai W, Li W, Zhai J 2012 <i>J. Am. Ceram. Soc.</i> <b>95</b> 1998
no DOI — not checkedZhang L, Zhang M, Wang L, Zhou C, Zhang Z, Yao Y, Zhang L, Xue D, Lou X, Ren X 2014 <i>Appl. Phys. Lett.</i> <b>105</b> 162908
no DOI — not checkedOkazaki K, Sakata K 1962 <i>Electrotechn. J. Jpn.</i> <b>7</b> 13
no DOI — not checkedQiao X S, Chen X M, Lian H L, Zhou J P, Liu P 2016 <i>J. Eur. Ceram. Soc.</i> <b>36</b> 3995
no DOI — not checkedVeera Gajendra Babu M, Bagyalakshmi B, Pathinettam Padiyan D, Ren Y, Sundarakannan B 2017 <i>Scripta Mater.</i> <b>141</b> 67
What this badge says. CiteStamped means the CHECKABLE references of this
work were clean at the dated check: each resolved to a known work in a public registry, and none
carried a retraction notice at that time. If Crossref’s record marks the work itself
retracted, withdrawn, or removed, the badge says so instead of showing clean. It says nothing
about the quality, findings, or importance of the work itself, and nothing about references
with neither a DOI nor an arXiv id.
checked 2026-08-12 — re-checked at most once a day, when someone opens this page, so the date shown is the last check; titles and statuses come from Crossref and DataCite and are not part of the signed record
Embed this badge
Both snippets point at the live badge image and link back to this page. The badge shows the date of its last check, which runs at most once a day, when someone opens this page.
<a href="https://citestamp.com/citestamped/10.7498/aps.69.20201079"><img src="https://citestamp.com/citestamped/10.7498/aps.69.20201079/badge.svg" alt="CiteStamped reference-health badge" width="460" height="64"></a>
[](https://citestamp.com/citestamped/10.7498/aps.69.20201079)