On the public citation graph

Effect of the ironing process on ABS parts produced by FDM

0 signed · 62 inferred · view as graph

Inferred edges come from two machine sources: sweeps of open repository metadata (mostly SSRN and Zenodo), and a bulk OpenAlex citation snapshot. Every row below is labelled with the one it came from. Neither is a complete citation index — absence here is not evidence of absence.

Is this your work? Sign in with ORCID and put your name on the claims that are yours.
Claim with ORCID
Reference health. See whether every reference in this work resolves to a known work and none has been retracted — and get a dated CiteStamped badge you can embed.
See reference health

What this work says

Outgoing claims: the papers this work cites, builds on, or argues with.

inferredcites →https://doi.org/10.1002/pat.4787openalex-snapshot
Influence of fused deposition modeling parameters on the mechanical properties of ABS parts
inferredcites →https://doi.org/10.1007/978-1-4939-2113-3openalex-snapshot
Additive Manufacturing Technologies
inferredcites →https://doi.org/10.1007/s00170-006-0556-9openalex-snapshot
A model research for prototype warp deformation in the FDM process
inferredcites →https://doi.org/10.1007/s00170-006-0878-7openalex-snapshot
A model research for prototype warp deformation in the FDM process
inferredcites →https://doi.org/10.1007/s00170-019-03965-yopenalex-snapshot
Modelling of the temperature and residual stress fields during 3D printing of polymer composites
inferredcites →https://doi.org/10.1007/s40032-016-0340-zopenalex-snapshot
Post Processing Methods used to Improve Surface Finish of Products which are Manufactured by Additive Manufacturing Technologies: A Review
inferredcites →https://doi.org/10.1007/s40964-018-0063-1openalex-snapshot
Interlayer thermal history modification for interface strength in fused filament fabricated parts
inferredcites →https://doi.org/10.1016/j.bushor.2011.11.003openalex-snapshot
3-D printing: The new industrial revolution
inferredcites →https://doi.org/10.1016/j.compscitech.2017.07.017openalex-snapshot
Characterization of residual stress and deformation in additively manufactured ABS polymer and composite specimens
inferredcites →https://doi.org/10.1016/j.jmapro.2016.08.007openalex-snapshot
An in-process laser localized pre-deposition heating approach to inter-layer bond strengthening in extrusion based polymer additive manufacturing
inferredcites →https://doi.org/10.1016/j.matdes.2013.02.067openalex-snapshot
Fiber Bragg grating based investigation of residual strains in ABS parts fabricated by fused deposition modeling process
inferredcites →https://doi.org/10.1016/j.procir.2016.02.314openalex-snapshot
Improvement and Evaluation of the Interlaminar Bonding Strength of FDM Parts by Atmospheric-Pressure Plasma
inferredcites →https://doi.org/10.1038/srep39852openalex-snapshot
Development of the Improving Process for the 3D Printed Structure
inferredcites →https://doi.org/10.1088/1757-899x/210/1/012062openalex-snapshot
An exploration of polymer adhesion on 3D printer bed
inferredcites →https://doi.org/10.1108/rpj-01-2019-0017openalex-snapshot
Increasing strength of FFF three-dimensional printed parts by influencing on temperature-related parameters of the process
inferredcites →https://doi.org/10.1115/msec2017-2794openalex-snapshot
Assessing the Geometric Integrity of Additive Manufactured Parts From Point Cloud Data Using Spectral Graph Theoretic Sparse Representation-Based Classification
inferredcites →https://doi.org/10.1243/09544054jem990openalex-snapshot
A parametric study of part distortions in fused deposition modelling using three-dimensional finite element analysis
inferredcites →https://doi.org/10.17577/ijertv4is040393openalex-snapshot
Dimensional Accuracy and Surface Finish Optimization of Fused Deposition Modelling Parts using Desirability Function Analysis
inferredcites →https://doi.org/10.26776/ijemm.03.02.2018.04openalex-snapshot
Parametric Effect on Surface Finish of Three-Dimensional Printed Object
inferredcites →https://doi.org/10.3221/igf-esis.48.68openalex-snapshot
Effect of protective coatings on the water absorption and mechanical properties of 3D printed PLA
inferredcites →https://doi.org/10.4028/www.scientific.net/amr.538-541.1564openalex-snapshot
Research on the Interlayer Stress and Warpage Deformation in FDM
inferredcites →https://doi.org/10.4236/msa.2018.91002openalex-snapshot
Surface Roughness Quality and Dimensional Accuracy—A Comprehensive Analysis of 100% Infill Printed Parts Fabricated by a Personal/Desktop Cost-Effective FDM 3D Printer

What points at this work

Incoming claims: where this work appears in other papers’ reference lists and arguments.

inferred← citeshttps://doi.org/10.2139/ssrn.4776906openalex-extracted
Understanding Tensile and Fracture Behavior of Pla Specimens Fabricated Via Fused Deposition Modeling: Evaluating Thickness, Scale and Printing Sequence
inferred← citeshttps://doi.org/10.1002/adem.202301711openalex-snapshot
Low‐Roughness 3D‐Printed Surfaces by Ironing for the Integration with Printed Electronics
inferred← citeshttps://doi.org/10.1002/admt.202500627openalex-snapshot
Fully Printed Organic Electrochemical Transistors With Low‐Resistance Electrodes on Planarized 3D‐Printed Substrates
inferred← citeshttps://doi.org/10.1002/app.71624openalex-snapshot
Effect of Ironing Parameters on Surface Quality and Energy Demand of FDM ‐Fabricated Proximal Humerus Plates: A Box–Behnken and Machine Learning Study
inferred← citeshttps://doi.org/10.1002/mame.202400367openalex-snapshot
Additive Manufacturing of Watertight ABS Parts and Its Use for Chemical Metal Plating
inferred← citeshttps://doi.org/10.1002/pc.29651openalex-snapshot
Path‐following roller compaction for enhanced mechanical strength of short carbon fiber reinforced nylon in 3D printing
inferred← citeshttps://doi.org/10.1007/978-3-031-77631-1_22openalex-snapshot
The Influence of Interlayer Ironing on Dimensional Accuracy of ASA MEX Manufactured Parts
inferred← citeshttps://doi.org/10.1007/s00170-023-11919-8openalex-snapshot
Effect of printing parameters on extrusion-based additive manufacturing using highly filled CuSn12 filament
inferred← citeshttps://doi.org/10.1007/s00170-024-14232-0openalex-snapshot
Surface roughness assessment of ABS and PLA filament 3D printing parts: structural parameters experimentation and semi-empirical modelling
inferred← citeshttps://doi.org/10.1007/s00170-024-14602-8openalex-snapshot
Experimental investigation of FDM manufacturing of 316 l stainless steel
inferred← citeshttps://doi.org/10.1007/s00170-025-16986-7openalex-snapshot
Extracorporeal blood circuits with 3D-printed flat sheet membrane modules
inferred← citeshttps://doi.org/10.1007/s40430-024-04817-xopenalex-snapshot
Neosanding postprocessing for improving surface roughness of extrusion-based 3D printing of PLA parts: a comparative analysis of stylus profilometer and confocal profilometry methods
inferred← citeshttps://doi.org/10.1007/s40964-022-00265-yopenalex-snapshot
Characterization of chemical surface finishing with hot acetone vapours on ABS parts fabricated by FFF
inferred← citeshttps://doi.org/10.1007/s40964-024-00610-3openalex-snapshot
Definitive screening design for mechanical properties enhancement in extrusion-based additive manufacturing of carbon fiber-reinforced PLA composite
inferred← citeshttps://doi.org/10.1007/s40964-024-00614-zopenalex-snapshot
High-performance thermoplastics obtained by fused filament fabrication: effects of harsh environmental conditions of power transformers
inferred← citeshttps://doi.org/10.1007/s40964-025-01285-0openalex-snapshot
Fuzzy skin in fused filament fabrication: enhancing morphology, wettability, and friction through a full-factorial experimental plan
inferred← citeshttps://doi.org/10.1016/j.addlet.2024.100194openalex-snapshot
Effect of Process Parameters in Additively Manufactured Sensors prepared via Material Extrusion Processes: Correlation among Electrical, Mechanical and Microstructure Properties
inferred← citeshttps://doi.org/10.1016/j.engfailanal.2024.108587openalex-snapshot
Exploring the impact of thickness, scale and printing sequence on the tensile and fracture properties of PLA specimens fabricated via fused deposition modeling
inferred← citeshttps://doi.org/10.1016/j.mfglet.2024.09.102openalex-snapshot
Investigations on ironing parameters in screw extrusion additive manufacturing (SEAM)
inferred← citeshttps://doi.org/10.1016/j.mtcomm.2025.114555openalex-snapshot
Enhancing fatigue performance of FFF-3D printed PLA parts through surface roughness optimization via ironing process
inferred← citeshttps://doi.org/10.1016/j.procir.2023.09.200openalex-snapshot
Effects of nozzle design on CFRP print quality using Commingled Yarn
inferred← citeshttps://doi.org/10.1016/j.procir.2025.02.160openalex-snapshot
Effect of a Compliant Build Platform on the Warpage in Material Extrusion Additive Manufacturing
inferred← citeshttps://doi.org/10.1016/j.prostr.2020.10.042openalex-snapshot
Influence of seams in the mechanical properties of PLA produced with multiple extrusion modules
inferred← citeshttps://doi.org/10.1016/j.prostr.2021.10.062openalex-snapshot
Scale effect on the mechanical behavior of PLA specimens fabricated via Fused Deposition Modeling
inferred← citeshttps://doi.org/10.1016/j.prostr.2021.12.030openalex-snapshot
Characterization of 3D printed ABS specimens under static and cyclic torsional loadings
inferred← citeshttps://doi.org/10.1016/j.prostr.2022.12.162openalex-snapshot
Ironing process influence on the warping of ABS parts produced by Fused Filament Fabrication
inferred← citeshttps://doi.org/10.1016/j.rcim.2025.103123openalex-snapshot
Force-based adaptive deposition in multi-axis additive manufacturing: Low porosity for enhanced strength
inferred← citeshttps://doi.org/10.1038/s41598-024-52827-5openalex-snapshot
Ironing process optimization for enhanced properties in material extrusion technology using Box–Behnken Design
inferred← citeshttps://doi.org/10.1063/5.0305440openalex-snapshot
Prediction of extrudate deposition regimes from rheology and printing kinematics using computational fluid dynamics
inferred← citeshttps://doi.org/10.1108/rpj-11-2022-0404openalex-snapshot
Bead geometry–induced stress concentration factors in material extrusion polymer additive manufacturing
inferred← citeshttps://doi.org/10.1109/iemtronics55184.2022.9795815openalex-snapshot
Sensory Data Fusion Using Machine Learning Methods For In-Situ Defect Registration In Additive Manufacturing: A Review
inferred← citeshttps://doi.org/10.1109/jsen.2020.3007249openalex-snapshot
Characterizing the Electrical Properties of Anisotropic, 3D-Printed Conductive Sheets for Sensor Applications
inferred← citeshttps://doi.org/10.1145/3623263.3629154openalex-snapshot
Laser Polishing: A Postprocessing Protocol for Fused Deposition Modeling 3D Printed Parts Using Existing Tooling
inferred← citeshttps://doi.org/10.1177/07316844231173059openalex-snapshot
Improving surface smoothness in FDM parts through ironing post-processing
inferred← citeshttps://doi.org/10.24425/bpasts.2021.140016openalex-snapshot
Computational intelligence in development of 3D printing and reverse engineering
inferred← citeshttps://doi.org/10.3390/app13074429openalex-snapshot
Polymer-Metal Adhesion of Single-Lap Joints Using Fused Filament Fabrication Process: Aluminium with Carbon Fiber Reinforced Polyamide
inferred← citeshttps://doi.org/10.3390/ma14112907openalex-snapshot
The Effect of Annealing on Additive Manufactured ULTEM™ 9085 Mechanical Properties
inferred← citeshttps://doi.org/10.3390/ma17163953openalex-snapshot
Systematic Evaluation of Adhesion and Fracture Toughness in Multi-Material Fused Deposition Material Extrusion
inferred← citeshttps://doi.org/10.3390/polym14010199openalex-snapshot
CaCO3 Polymorphs Used as Additives in Filament Production for 3D Printing
inferred← citeshttps://doi.org/10.3390/polym14235098openalex-snapshot
On Comparison of Heat Treated and Non-Heat-Treated LOM Manufactured Sample for Poly(lactic)acid: Mechanical and Morphological View Point
Editorial review for independent work. ICSAC — the Institute for Complexity Science and Advanced Computing — runs a structured editorial panel for researchers publishing outside journals, and publishes on CiteStamp rails. Submission is free and goes through ORCID: icsacinstitute.org/submit.