On the public citation graph
Sequential injection overmolding of an elastomeric ethylene‐octene copolymer on a polypropylene homopolymer core
0 signed · 50 inferred · view as graph
Inferred edges come from two machine sources: sweeps of open repository metadata (mostly SSRN and Zenodo), and a bulk OpenAlex citation snapshot. Every row below is labelled with the one it came from. Neither is a complete citation index — absence here is not evidence of absence.
Is this your work? Sign in with ORCID and put your name on the
claims that are yours.
Reference health. See whether every reference in this work resolves to a
known work and none has been retracted — and get a dated CiteStamped
badge you can embed.
What this work says
Outgoing claims: the papers this work cites, builds on, or argues with.
inferredcites →https://doi.org/10.1002/(sici)1097-4628(19971107)66:6<1175::aid-app17>3.0.co;2-0openalex-snapshot
The effects of short-chain branching and comonomer type on the interfacial tension of polypropylene-polyolefin elastomer blends
inferredcites →https://doi.org/10.1002/(sici)1097-4628(19980919)69:12<2441::aid-app15>3.0.co;2-#openalex-snapshot
Thermal and mechanical properties for binary blends of metallocene polyethylene with conventional polyolefins
inferredcites →https://doi.org/10.1002/pen.11107openalex-snapshot
Sequential injection molding of thermoplastic polymers. Analysis of processing parameters for optimal bonding conditions
inferredcites →https://doi.org/10.1002/polb.1995.090330912openalex-snapshot
Isotactic polypropylene‐compatible block copolymer
inferredcites →https://doi.org/10.1017/cbo9780511623196openalex-snapshot
Polymers at Surfaces and Interfaces
inferredcites →https://doi.org/10.1021/ma971020xopenalex-snapshot
Direct Correlation between Interfacial Width and Adhesion in Glassy Polymers
inferredcites →https://doi.org/10.1063/1.1677735openalex-snapshot
Theory of the Interface between Immiscible Polymers. II
inferredcites →https://doi.org/10.1106/jft5-7b0b-muxl-ruetopenalex-snapshot
Measurements of Ballistic Impact Response of Novel Coextruded PC/PMMA Multilayered-Composites
inferredcites →https://doi.org/10.1163/156856194x00591openalex-snapshot
Direct measurement of molecular level adhesion between poly(ethylene terephthalate) and polyethylene films: determination of surface and interfacial energies
What points at this work
Incoming claims: where this work appears in other papers’ reference lists and arguments.
inferred← citeshttps://doi.org/10.2139/ssrn.4784973openalex-extracted
A Comparison of the Thermal and Mechanical Interface Behaviour of Overmoulded Vulcanized Thermoplastic Elastomers
inferred← citeshttps://doi.org/10.1002/app.36351openalex-snapshot
Formation of thermally induced craze and prevention by using infrared radiation annealing method
inferred← citeshttps://doi.org/10.1002/pen.21415openalex-snapshot
Adhesion control for injection overmolding of polypropylene with elastomeric ethylene copolymers
inferred← citeshttps://doi.org/10.1002/pen.21576openalex-snapshot
Effect of a tie film on the enhanced interfacial adhesion between polyethylene and polyamide‐6 in a sequential injection molding
inferred← citeshttps://doi.org/10.1002/pen.21630openalex-snapshot
Adhesion and delamination failure mechanisms in alternating layered polyamide and polyethylene with compatibilizer
inferred← citeshttps://doi.org/10.1002/pen.24662openalex-snapshot
Morphology and interfacial strength of nonisothermally fusion bonded hard and soft thermoplastics
inferred← citeshttps://doi.org/10.1002/pen.25408openalex-snapshot
Adhesion between thermoplastic elastomers and polyamide‐12 with different glass fiber fractions in two‐component injection molding
inferred← citeshttps://doi.org/10.1002/pen.26901openalex-snapshot
Effect of inorganic nanoparticles on polypropylene in‐mold decoration and microcellular foaming injection molding composites
inferred← citeshttps://doi.org/10.1002/polb.21719openalex-snapshot
Reinforcement of solid‐melt interfaces for semicrystalline polymers in a sequential two‐staged injection molding process
inferred← citeshttps://doi.org/10.1002/polb.23154openalex-snapshot
Extruder‐made TPO nanocomposites. I. Effect of maleated polypropylene and organoclay ratio on the morphology and mechanical properties
inferred← citeshttps://doi.org/10.1002/polb.23289openalex-snapshot
Extruder‐made TPO nanocomposites. II. Effect of maleated poly(propylene)/organoclay ratio on morphology and thermal expansion behavior
inferred← citeshttps://doi.org/10.1007/978-94-007-6064-6_20openalex-snapshot
Polymer Blends Containing “Nanoparticles”
inferred← citeshttps://doi.org/10.1007/978-981-19-1968-8_59openalex-snapshot
Study Optimization of Process Parameters in Overmolding of Multi Plastic Materials
inferred← citeshttps://doi.org/10.1007/s00170-011-3690-yopenalex-snapshot
Sealing of polymer micro-structures by over-moulding
inferred← citeshttps://doi.org/10.1007/s00170-017-0425-8openalex-snapshot
Multiphysics modelling and experimental investigations of the filling and curing phases of bi-injection moulding of thermoplastic polymer/liquid silicone rubbers
inferred← citeshttps://doi.org/10.1007/s00170-023-11720-7openalex-snapshot
Optimizing process parameters of a material extrusion–based overprinting technique for the fabrication of tensile specimens
inferred← citeshttps://doi.org/10.1016/b978-0-12-816198-2.00005-0openalex-snapshot
Hard/soft combinations based on thermoplastic elastomer and a rigid thermoplastic polymer: Study of the adhesion strength
inferred← citeshttps://doi.org/10.1016/b978-0-323-91214-3.00003-xopenalex-snapshot
Structural bonds without an adhesive: Understanding adhesion of semicrystalline thermoplastic interfaces
inferred← citeshttps://doi.org/10.1016/j.applthermaleng.2024.123934openalex-snapshot
A comparison of the thermal and mechanical interface behaviour of overmoulded vulcanized thermoplastic elastomers
inferred← citeshttps://doi.org/10.1016/j.compositesa.2021.106525openalex-snapshot
Recent developments on the overmolding process for the fabrication of thermoset and thermoplastic composites by the integration of nano/micron-scale reinforcements
inferred← citeshttps://doi.org/10.1016/j.eurpolymj.2009.01.032openalex-snapshot
Transmission electron microscopy study of phase morphology in polypropylene/ethylene-octene copolymer blends
inferred← citeshttps://doi.org/10.1016/j.ijadhadh.2013.05.016openalex-snapshot
Adhesion control for injection overmolding of elastomeric propylene copolymers on polypropylene. Effects of block and random microstructures
inferred← citeshttps://doi.org/10.1016/j.ijthermalsci.2025.110446openalex-snapshot
Modelling of interfacial morphology formation driven by thermal and hydrodynamic instabilities in injection overmoulding of fibre reinforced polymer composites
inferred← citeshttps://doi.org/10.1016/j.jmapro.2025.05.004openalex-snapshot
Investigation of interfacial bonding behavior in multilayer injection molding of optical products
inferred← citeshttps://doi.org/10.1016/j.matdes.2009.05.037openalex-snapshot
Study of the interface behaviour between MABS/TPU bi-layer structures obtained through over moulding
inferred← citeshttps://doi.org/10.1016/j.mtla.2024.102185openalex-snapshot
Investigation of foaming and mechanical properties of olefin block copolymer/talc/polypropylene composites in IMD/MIM processes
inferred← citeshttps://doi.org/10.1016/j.polymer.2011.08.019openalex-snapshot
Polypropylene-elastomer (TPO) nanocomposites: 1. Morphology
inferred← citeshttps://doi.org/10.1016/j.polymertesting.2008.12.007openalex-snapshot
Crystallization kinetics of polypropylene/ethylene–octene copolymer blends
inferred← citeshttps://doi.org/10.1016/j.promfg.2020.08.071openalex-snapshot
Experimental and numerical investigation of peel test specimen using bi-injection molding process
inferred← citeshttps://doi.org/10.1021/am1003574openalex-snapshot
Interfacial Crystalline Structures in Injection Over-Molded Polypropylene and Bond Strength
inferred← citeshttps://doi.org/10.1080/03602559.2013.836536openalex-snapshot
Comparative Studies on Enhanced Interfacial Adhesion between PE and PA6 through Two Routes in a Sequential Injection Molding Process
inferred← citeshttps://doi.org/10.1122/1.2901231openalex-snapshot
Adhesion at interfaces between highly entangled polymer melts
inferred← citeshttps://doi.org/10.3139/120.111408openalex-snapshot
Effect of temperature related processing parameters on the interface bonding strength of automotive overmolding injection parts
inferred← citeshttps://doi.org/10.3144/expresspolymlett.2019.77openalex-snapshot
Combination of 3D printing and injection molding: Overmolding and overprinting
inferred← citeshttps://doi.org/10.3390/ma14195704openalex-snapshot
Thermomechanical Behaviour and Interface of Overmoulded Soft Thermoplastic Vulcanizate Elastomers
inferred← citeshttps://doi.org/10.35376/10324/2743openalex-snapshot
Metodología de diseño de materiales compuestos de matriz poliolefínica reforzados con fibras discontinuas para aplicaciones en transporte
inferred← citeshttps://doi.org/10.37869/ijatec.v1i3.38openalex-snapshot
The Mechanical Properties Requirement for Polymer Composite Automotive Parts - A Review
inferred← citeshttps://doi.org/10.4028/p-pjzkg4openalex-snapshot
Influence of Filler on the Interfacial Strength between TPE and PP Composites
inferred← citeshttps://doi.org/10.4028/www.scientific.net/kem.622-623.453openalex-snapshot
Adhesion Strength Study of Silicone Rubber Compounds to Nylon 66
inferred← citeshttps://doi.org/10.58837/chula.the.2021.824openalex-snapshot
การพฒนาเทอรมอพลาสตกวลคาไนเซตจากยางโบรโมบวทลและพอลโพรพลนสำหรบจกปดหลอดเกบเลอด
inferred← citeshttps://doi.org/10.70675/a8b7f8fezba8fz4580zbb20z7e779e66d233openalex-snapshot
Élaboration et caractérisation de systèmes ternaires miscibles PLA/PEO/argile native : analyse des phénomènes de séparation de phases et d’interdiffusion
Editorial review for independent work. ICSAC — the Institute for Complexity
Science and Advanced Computing — runs a structured editorial panel for researchers
publishing outside journals, and publishes on CiteStamp rails. Submission is free
and goes through ORCID: icsacinstitute.org/submit.