On the public citation graph
Kinetics and thermal characterization of thermoset cure
0 signed · 1094 inferred · view as graph
Inferred edges come from two machine sources: sweeps of open repository metadata (mostly SSRN and Zenodo), and a bulk OpenAlex citation snapshot. Every row below is labelled with the one it came from. Neither is a complete citation index — absence here is not evidence of absence.
Is this your work? Sign in with ORCID and put your name on the
claims that are yours.
Reference health. See whether every reference in this work resolves to a
known work and none has been retracted — and get a dated CiteStamped
badge you can embed.
What this work says
Outgoing claims: the papers this work cites, builds on, or argues with.
inferredcites →https://doi.org/10.1002/app.1967.070110901openalex-snapshot
Determination of rates of thermal decomposition of polymerization initiators with a differential scanning calorimeter
inferredcites →https://doi.org/10.1002/app.1969.070131009openalex-snapshot
Dielectric relaxation and crosslinking in unsaturated polyester resins
inferredcites →https://doi.org/10.1002/app.1969.070131115openalex-snapshot
Thermal conductivity, specific heat, and dynamic mechanical behavior of diglycidyl ether of bisphenol a cured with m‐phenylenediamine
inferredcites →https://doi.org/10.1002/macp.1957.020230116openalex-snapshot
The curing of polyester resins, and the general mechanism of the later stages of polyfunctional polyadditions
inferredcites →https://doi.org/10.1002/pol.1970.150080605openalex-snapshot
Calorimetric investigation of polymerization reactions. III. Curing reaction of epoxides with amines
inferredcites →https://doi.org/10.1002/pol.1970.150081010openalex-snapshot
Calorimetric investigation of polymerization reactions. IV. Curing reaction of polyester fumarate with styrene
inferredcites →https://doi.org/10.1002/pol.1971.150091203openalex-snapshot
Anionic bulk polymerization of α‐methylstyrene. Stopping of polymerization due to vitrification and equilibrium in bulk
inferredcites →https://doi.org/10.1007/978-1-4615-8621-0_18openalex-snapshot
Dynamic Cure Analysis of Thermosetting Polymers
inferredcites →https://doi.org/10.1016/0016-0032(64)90488-0openalex-snapshot
Handbook of reinforced plastics
inferredcites →https://doi.org/10.1016/0032-3861(68)90024-4openalex-snapshot
Differential scanning calorimetry of epoxy resins
inferredcites →https://doi.org/10.1016/0032-3861(71)90056-5openalex-snapshot
Kinetics of epoxy cure: (1) The system bisphenol-A diglycidyl ether/m-phenylene diamine
inferredcites →https://doi.org/10.1021/i360030a005openalex-snapshot
Electrical Resistivity and Crosslinking in Thermosetting Resins
inferredcites →https://doi.org/10.1038/2121229a0openalex-snapshot
Determination of Activation Energies of Chemical Reactions by Differential Thermal Analysis
What points at this work
Incoming claims: where this work appears in other papers’ reference lists and arguments.
inferred← citeshttps://doi.org/10.1002/(sici)1097-4628(19991017)74:3<532::aid-app8>3.0.co;2-qopenalex-snapshot
Tetrafunctional epoxy resins: Modeling the curing kinetics based on FTIR spectroscopy data
inferred← citeshttps://doi.org/10.1002/(sici)1097-4628(19991031)74:5<1044::aid-app2>3.0.co;2-qopenalex-snapshot
Curing kinetics of divinyl ester resins with styrene
inferred← citeshttps://doi.org/10.1002/(sici)1097-4628(20000606)76:10<1572::aid-app12>3.0.co;2-copenalex-snapshot
An investigation of vinyl-ester?styrene bulk copolymerization cure kinetics using Fourier transform infrared spectroscopy
inferred← citeshttps://doi.org/10.1002/(sici)1097-4628(20000711)77:2<355::aid-app11>3.0.co;2-yopenalex-snapshot
Analysis of kinetic parameters of an urethane-acrylate resin for pultrusion process
inferred← citeshttps://doi.org/10.1002/0471238961.1608051411151606.a01openalex-snapshot
Phenolic Resins
inferred← citeshttps://doi.org/10.1002/0471238961.1608051411151606.a01.pub2openalex-snapshot
Phenolic Resins
inferred← citeshttps://doi.org/10.1002/0471238961.koe00042openalex-snapshot
Rheology of Polymer–Carbon Nanotube Composites
inferred← citeshttps://doi.org/10.1002/1097-0126(200008)49:8<831::aid-pi462>3.0.co;2-3openalex-snapshot
Residual monomer content in bone cements based on poly(methyl methacrylate)
inferred← citeshttps://doi.org/10.1002/1097-4628(20000906)77:10<2139::aid-app6>3.0.co;2-nopenalex-snapshot
Curing kinetics and viscosity change of a two-part epoxy resin during mold filling in resin-transfer molding process
inferred← citeshttps://doi.org/10.1002/1097-4628(20001003)78:1<124::aid-app160>3.0.co;2-hopenalex-snapshot
Unsaturated polyester resins: Numerical solution of a system of equations able to describe both styrene and unsaturation consumption
inferred← citeshttps://doi.org/10.1002/1097-4628(20010307)79:10<1771::aid-app50>3.0.co;2-dopenalex-snapshot
Curing kinetics of epoxy-urethane copolymers
inferred← citeshttps://doi.org/10.1002/9780471238966.koe00042openalex-snapshot
Rheology of Polymer–Carbon Nanotube Composites
inferred← citeshttps://doi.org/10.1002/9781118092866.ch9openalex-snapshot
Vulcanization Characteristics and Curing Kinetic of Rubber–Organoclay Nanocomposites
inferred← citeshttps://doi.org/10.1002/9781118097298.weoc011openalex-snapshot
P rocessing: Autoclave Modeling
inferred← citeshttps://doi.org/10.1002/9781118097298.weoc222openalex-snapshot
Sheet Molding Compounds
inferred← citeshttps://doi.org/10.1002/9783527614950.ch3openalex-snapshot
Rheokinetics of Oligomer Curing
inferred← citeshttps://doi.org/10.1002/9783527644346.ch12openalex-snapshot
Modeling of the Chemorheological Behavior of Thermosetting Polymer Nanocomposites
inferred← citeshttps://doi.org/10.1002/adem.201800411openalex-snapshot
Thermally Controlled Adhesive Curing during the Production of Piezo‐Metal‐Compounds: Finite Element Modeling and Analyses
inferred← citeshttps://doi.org/10.1002/adfm.201101553openalex-snapshot
Accelerated Self‐Healing Via Ternary Interpenetrating Microvascular Networks
inferred← citeshttps://doi.org/10.1002/adts.202100385openalex-snapshot
Density Functional Theory for Polymer Phase Separations Induced by Coupling of Chemical Reaction and Elastic Stress
inferred← citeshttps://doi.org/10.1002/adv.10037openalex-snapshot
3‐D modeling reactive molding processes: From tool development to industrial application
inferred← citeshttps://doi.org/10.1002/adv.1984.060040312openalex-snapshot
Reactive polymer processing: Techniques and trends
inferred← citeshttps://doi.org/10.1002/adv.20057openalex-snapshot
Influence of postcuring conditions on the processing characteristics of epoxy components
inferred← citeshttps://doi.org/10.1002/adv.20162openalex-snapshot
Method to describe curing in large epoxy samples
inferred← citeshttps://doi.org/10.1002/adv.21272openalex-snapshot
Analysis and Optimization of the Silicone Molding Process Based on Numerical Simulations and Experiments
inferred← citeshttps://doi.org/10.1002/aic.15680openalex-snapshot
The kinetics of polyurethane structural foam formation: Foaming and polymerization
inferred← citeshttps://doi.org/10.1002/aic.690450113openalex-snapshot
3‐D nonisothermal flow simulation model for injected pultrusion processes
inferred← citeshttps://doi.org/10.1002/amp2.10072openalex-snapshot
Calculating the temperature and degree of cross‐linking for liquid silicone rubber processing in injection molding
inferred← citeshttps://doi.org/10.1002/aocs.12260openalex-snapshot
Isothermal Curing Kinetics of Epoxidized Fatty Acid Methyl Esters and Triacylglycerols
inferred← citeshttps://doi.org/10.1002/apj.2474openalex-snapshot
Analysis of bubble formation during injection molding of polymeric foams by computational fluid dynamics simulations
inferred← citeshttps://doi.org/10.1002/apmc.1997.052460110openalex-snapshot
Polyester composites reinforced with recycled FR‐4 epoxy laminates
inferred← citeshttps://doi.org/10.1002/app.11493openalex-snapshot
Curing and mechanical properties of dicyanate/poly(ether sulfone) semi‐interpenetrating polymer networks
inferred← citeshttps://doi.org/10.1002/app.12013openalex-snapshot
Curing kinetics of epoxy resin–imidazole–organic montmorillonite nanocomposites determined by differential scanning calorimetry
inferred← citeshttps://doi.org/10.1002/app.12461openalex-snapshot
Resin‐transfer molding of natural fiber–reinforced plastic. I. Kinetic study of an unsaturated polyester resin containing an inhibitor and various promoters
inferred← citeshttps://doi.org/10.1002/app.13463openalex-snapshot
An analysis of the influence of the accelerator/sulfur ratio in the cure reaction and the uniaxial stress–strain behavior of SBR
inferred← citeshttps://doi.org/10.1002/app.13686openalex-snapshot
Cure kinetics, microheterogeneity, and mechanical properties of the high‐temperature cure of vinyl ester resins
inferred← citeshttps://doi.org/10.1002/app.1888openalex-snapshot
Application of chemo‐rheology to establish a process window for a new solventless system to manufacture pre‐pregs and laminates for electronic applications
inferred← citeshttps://doi.org/10.1002/app.1946openalex-snapshot
Morphology of a linear polymer‐modified epoxy‐amine formulation cured by microwave energy at different heating rates
inferred← citeshttps://doi.org/10.1002/app.1977.070210903openalex-snapshot
Thermal analysis of thermosetting phenolic compounds for injection molding
inferred← citeshttps://doi.org/10.1002/app.1980.070250305openalex-snapshot
Effect of temperature gradients on cure and stress gradients in thick thermoset castings
inferred← citeshttps://doi.org/10.1002/app.1983.070280205openalex-snapshot
On the curing kinetics of unsaturated polyesters with styrene
inferred← citeshttps://doi.org/10.1002/app.1983.070281014openalex-snapshot
Chemorheology of thermosetting resins. I. The chemorheology and curing kinetics of unsaturated polyester resin
inferred← citeshttps://doi.org/10.1002/app.1983.070281015openalex-snapshot
Chemorheology of thermosetting resins. II. Effect of particulates on the chemorheology and curing kinetics of unsaturated polyester resin
inferred← citeshttps://doi.org/10.1002/app.1983.070281016openalex-snapshot
Chemorheology of thermosetting resins. III. Effect of low‐profile additive on the chemorheology and curing kinetics of unsaturated polyester resin
inferred← citeshttps://doi.org/10.1002/app.1984.070290538openalex-snapshot
Chemorheology of thermosetting resins. IV. The chemorheology and curing kinetics of vinyl ester resin
inferred← citeshttps://doi.org/10.1002/app.1984.070291269openalex-snapshot
Cure mechanism of a modified nitrile epoxy adhesive
inferred← citeshttps://doi.org/10.1002/app.1990.070410535openalex-snapshot
Cure kinetics of an epoxy‐novolac molding compound
inferred← citeshttps://doi.org/10.1002/app.1990.070411137openalex-snapshot
An improved kinetic model for the autocatalytic curing of styrene‐based thermoset resins
inferred← citeshttps://doi.org/10.1002/app.1991.070420422openalex-snapshot
Thermal behavior and curing kinetics of poly(carbosilane)
inferred← citeshttps://doi.org/10.1002/app.1991.070431001openalex-snapshot
Vulcanization of rubber. Kinetic parameters for SBR and simulations of vulcanization in a mold
inferred← citeshttps://doi.org/10.1002/app.1992.070450203openalex-snapshot
Theoretical and experimental conversion in the curing of unsaturated polyester resins with styrene as a crosslinking agent
inferred← citeshttps://doi.org/10.1002/app.1993.070500618openalex-snapshot
Kinetics of curing reaction of epoxide catalyzed by tertiary amine
inferred← citeshttps://doi.org/10.1002/app.1994.070510116openalex-snapshot
Critical parameters for heat transfer and chemical reactions in thermosetting materials
inferred← citeshttps://doi.org/10.1002/app.1994.070510308openalex-snapshot
A kinetic study of the effect of three catalytic systems on the curing of an unsaturated polyester resin
inferred← citeshttps://doi.org/10.1002/app.1994.070530111openalex-snapshot
Cure kinetics of different molar ratios of 4,4′‐bismaleimidodiphenylmethane and bisphenol A dicyanate
inferred← citeshttps://doi.org/10.1002/app.1995.070581013openalex-snapshot
Catalyzing the curing reaction of a new benzoxazine‐based phenolic resin
inferred← citeshttps://doi.org/10.1002/app.20147openalex-snapshot
An analysis of the influence of the accelerator/sulfur ratio in the cure reaction and the uniaxial stress‐strain behavior of SBR
inferred← citeshttps://doi.org/10.1002/app.20224openalex-snapshot
Polymerization kinetics and thermal properties of dicyanate/clay nanocomposites
inferred← citeshttps://doi.org/10.1002/app.20314openalex-snapshot
A kinetic study on the autocatalytic cure reaction of a cyanate ester resin
inferred← citeshttps://doi.org/10.1002/app.21415openalex-snapshot
Cure kinetic study of carbon nanofibers/epoxy composites by isothermal DSC
inferred← citeshttps://doi.org/10.1002/app.21981openalex-snapshot
Cure behavior of DGEBA vinyl ester–styrene resins near silane‐treated interfaces
inferred← citeshttps://doi.org/10.1002/app.22465openalex-snapshot
Cure kinetics of a polymer‐based composite friction material
inferred← citeshttps://doi.org/10.1002/app.22735openalex-snapshot
Preparation and curing kinetics of bisphenol A type novolac epoxy resins
inferred← citeshttps://doi.org/10.1002/app.22828openalex-snapshot
Reactive blending approach to modify spin‐coated epoxy film: Part II. Crosslinking kinetics
inferred← citeshttps://doi.org/10.1002/app.23173openalex-snapshot
Vulcanization kinetic of styrene–butadiene rubber by sulfur/TBBS
inferred← citeshttps://doi.org/10.1002/app.23401openalex-snapshot
Morphology and cure kinetics of unsaturated polyester resin/block copolymer blends
inferred← citeshttps://doi.org/10.1002/app.24155openalex-snapshot
Kinetics of the curing reaction of unsaturated polyester resins catalyzed with new initiators and a promoter
inferred← citeshttps://doi.org/10.1002/app.24691openalex-snapshot
Modeling the chemorheological behavior of epoxy/liquid aromatic diamine for resin transfer molding applications
inferred← citeshttps://doi.org/10.1002/app.25284openalex-snapshot
Kinetic and heat transfer modeling of rubber blends' sulfur vulcanization with N‐t‐butylbenzothiazole‐sulfenamide and N,N‐di‐t‐butylbenzothiazole‐sulfenamide
inferred← citeshttps://doi.org/10.1002/app.25826openalex-snapshot
Conversion analysis of acrylated hyperbranched polymers UV‐cured below their ultimate glass transition temperature
inferred← citeshttps://doi.org/10.1002/app.26861openalex-snapshot
Curing kinetics study of an epoxy resin system for T800 carbon fiber filament wound composites by dynamic and isothermal DSC
inferred← citeshttps://doi.org/10.1002/app.27534openalex-snapshot
Synthesis, characterization, and UV curing kinetics of hyperbranched polycarbosilane
inferred← citeshttps://doi.org/10.1002/app.28962openalex-snapshot
Kinetics study of Ti[O(CH2)4OCHCH2]4 initiated ring‐opening polymerization of ε‐caprolactone by differential scanning calorimetry
inferred← citeshttps://doi.org/10.1002/app.29589openalex-snapshot
Dynamic cure kinetics of epoxy–novolac compounds as studied by differential scanning calorimetry
inferred← citeshttps://doi.org/10.1002/app.30261openalex-snapshot
Accelerator adsorption onto carbon nanotubes surface affects the vulcanization process of styrene–butadiene rubber composites
inferred← citeshttps://doi.org/10.1002/app.30720openalex-snapshot
Curing kinetics of medium reactive unsaturated polyester resin used for liquid composite molding process
inferred← citeshttps://doi.org/10.1002/app.30987openalex-snapshot
A thermal and rheological investigation during the complex cure of a two‐component thermoset polyurethane
inferred← citeshttps://doi.org/10.1002/app.31148openalex-snapshot
Modeling the effect of the curing conversion on the dynamic viscosity of epoxy resins cured by an anhydride curing agent
inferred← citeshttps://doi.org/10.1002/app.31200openalex-snapshot
Studies on the cure kinetics and networks properties of neat and polydimethylsioxane modified tetrafunctional epoxy resins
inferred← citeshttps://doi.org/10.1002/app.31995openalex-snapshot
Modeling processing of silicone rubber: Liquid versus hard silicone rubbers
inferred← citeshttps://doi.org/10.1002/app.32670openalex-snapshot
A three‐function numerical model for the prediction of vulcanization‐reversion of rubber during sulfur curing
inferred← citeshttps://doi.org/10.1002/app.33073openalex-snapshot
Studies on preparation and properties of vinyltriethoxysilane‐grafted styrene‐butadiene rubber
inferred← citeshttps://doi.org/10.1002/app.34231openalex-snapshot
Vulcanization kinetics of butyl rubber–clay nanocomposites and its dependence on clay microstructure
inferred← citeshttps://doi.org/10.1002/app.34605openalex-snapshot
Cure kinetics, glass transition temperature development, and dielectric spectroscopy of a low temperature cure epoxy/amine system
inferred← citeshttps://doi.org/10.1002/app.40566openalex-snapshot
Method for time–temperature–transformation diagrams using DSC data: Linseed aliphatic epoxy resin
inferred← citeshttps://doi.org/10.1002/app.42656openalex-snapshot
Preparation and kinetic analysis of room‐temperature vulcanized methylethylsilicone rubbers
inferred← citeshttps://doi.org/10.1002/app.43519openalex-snapshot
Combined experimental and numerical kinetic characterization of NR vulcanized with sulfur, N‐terbutyl, 2‐benzothiazylsulfenamide, and N,N‐diphenylguanidine
inferred← citeshttps://doi.org/10.1002/app.43966openalex-snapshot
Chemorheological time‐temperature‐transformation‐viscosity diagram: Foamed EPDM rubber compound
inferred← citeshttps://doi.org/10.1002/app.44803openalex-snapshot
Effects of graphene oxide and chemically reduced graphene oxide on the curing kinetics of epoxy amine composites
inferred← citeshttps://doi.org/10.1002/app.45425openalex-snapshot
Quasi‐isothermal DSC testing of epoxy adhesives using initial fast heating rates
inferred← citeshttps://doi.org/10.1002/app.45432openalex-snapshot
Advanced isoconversional cure kinetic analysis of epoxy/poly(furfuryl alcohol) bio‐resin system
inferred← citeshttps://doi.org/10.1002/app.45791openalex-snapshot
TTT ‐diagram for epoxy film adhesives using quasi‐isothermal scans with initial fast ramps
inferred← citeshttps://doi.org/10.1002/app.46347openalex-snapshot
Rheological characterization and modeling of vulcanization kinetics of natural rubber/starch blends
inferred← citeshttps://doi.org/10.1002/app.46698openalex-snapshot
Using fish scales (Sardina pilchardus) within ethylene‐propylene‐diene ter monomer rubber as bio‐based filler
inferred← citeshttps://doi.org/10.1002/app.46829openalex-snapshot
Influence of silver nanowires on thermal and electrical behaviors of a poly(epoxy) coating for aeronautical application
inferred← citeshttps://doi.org/10.1002/app.46850openalex-snapshot
Reaction kinetics and curing behavior of epoxies for use in a combined selective laser beam melting process of polymers
inferred← citeshttps://doi.org/10.1002/app.47216openalex-snapshot
Effect of electron‐beam irradiation on the thermal vulcanization of a natural rubber compound
inferred← citeshttps://doi.org/10.1002/app.47492openalex-snapshot
Nonisothermal simulation on pressure during resin transfer molding
inferred← citeshttps://doi.org/10.1002/app.47958openalex-snapshot
Effect of surface area of nanosilica particles on the cure kinetics parameters of an epoxy resin system
inferred← citeshttps://doi.org/10.1002/app.48245openalex-snapshot
Optimization method to select temperature based on chemorheological and exothermal reaction of RTM
inferred← citeshttps://doi.org/10.1002/app.48948openalex-snapshot
Optimization method to reduce three‐dimensional thermal gradients in resin transfer molding
inferred← citeshttps://doi.org/10.1002/app.48983openalex-snapshot
Studies on the curing behavior, thermal, and mechanical properties of epoxy resin‐co‐amine‐functionalized lead phthalocyanine
inferred← citeshttps://doi.org/10.1002/app.49989openalex-snapshot
Cure simulations of thick adhesive bondlines for wind energy applications
inferred← citeshttps://doi.org/10.1002/app.50826openalex-snapshot
An evaluation of the curing characteristics of thermosetting epoxy carbon fiber sheet molding compounds and validation through computer simulations and molding trials
inferred← citeshttps://doi.org/10.1002/app.51013openalex-snapshot
Polydimethylsiloxane crosslinking kinetics: A systematic study on Sylgard184 comparing rheological and thermal approaches
inferred← citeshttps://doi.org/10.1002/app.51520openalex-snapshot
Experimental and simulative investigation of a multistage 2K injection molding process of PA6 and EPDM
inferred← citeshttps://doi.org/10.1002/app.51765openalex-snapshot
Rheological kinetics of ferrocenylsilane functionalized polyurethanes based on 4,4'‐methylenediphenyl diisocyanate for advanced energetic materials
inferred← citeshttps://doi.org/10.1002/app.53743openalex-snapshot
Simulation and optimized design of cure cycle for three‐dimensional polymer‐matrix composite component
inferred← citeshttps://doi.org/10.1002/app.53929openalex-snapshot
Experimental characterization and numerical modeling of a viscoelastic expandable epoxy foam: Time–temperature transformation and time–temperature equivalence diagrams
inferred← citeshttps://doi.org/10.1002/app.54320openalex-snapshot
Isothermal anionic polymerization of ε‐caprolactam to polyamide‐6: Kinetic modeling and application for production process
inferred← citeshttps://doi.org/10.1002/app.54862openalex-snapshot
Degradation kinetics of epoxidized soybean oil composites filled with sisal fiber
inferred← citeshttps://doi.org/10.1002/app.54901openalex-snapshot
Investigation on strategies for optimizing process definition in rubber processing: A study on mechanical and chemical properties of vulcanizates as basis for the development of a new calculation model for quality prediction
inferred← citeshttps://doi.org/10.1002/app.55061openalex-snapshot
Modeling the curing kinetics of two thermoset adhesives under varying temperature conditions
inferred← citeshttps://doi.org/10.1002/app.70284openalex-snapshot
Cure Kinetics and Interfacial Effects in PEGDA ‐Based Solid Composite Electrolytes
inferred← citeshttps://doi.org/10.1002/app.70803openalex-snapshot
Optimization of the Vulcanization Process of Thick Rubber Based on a New Vulcanization Kinetic Model
inferred← citeshttps://doi.org/10.1002/cjce.21862openalex-snapshot
Modelling of curing kinetics of amine cured epoxy resins for vacuum assisted resin infusion molding
inferred← citeshttps://doi.org/10.1002/kin.1051openalex-snapshot
Curing kinetics and mechanism of bisphenol S epoxy resin with 4,4′‐Diaminodiphenyl ether or phathlic anhydride
inferred← citeshttps://doi.org/10.1002/macp.200400170openalex-snapshot
Kinetic Studies of Liquid Crystalline and Isotropic Vinyl Ester Resins
inferred← citeshttps://doi.org/10.1002/macp.200600408openalex-snapshot
Modeling the Cure of an Epoxy‐Amine Resin with Bisphenol A as an External Catalyst
inferred← citeshttps://doi.org/10.1002/macp.200600614openalex-snapshot
Kinetic Analysis of Isothermal and Nonisothermal Epoxy‐Amine Cures by Model‐Free Isoconversional Methods
inferred← citeshttps://doi.org/10.1002/mame.201100457openalex-snapshot
Novel Reaction Kinetic Model for Anionic Polyamide‐6
inferred← citeshttps://doi.org/10.1002/mame.202000617openalex-snapshot
Chemorheology and Kinetics of High‐Performance Polyurethane Binders Based on HMDI
inferred← citeshttps://doi.org/10.1002/marc.200600588openalex-snapshot
Epoxy/Silica Nanocomposites: Nanoparticle‐Induced Cure Kinetics and Microstructure
inferred← citeshttps://doi.org/10.1002/masy.19930680114openalex-snapshot
Material characterization in liquid composite molding
inferred← citeshttps://doi.org/10.1002/masy.200390068openalex-snapshot
Characterization of epoxy prepreg SPX 8800 system by isothermal differential scanning calorimetry
inferred← citeshttps://doi.org/10.1002/masy.200651111openalex-snapshot
Modeling the Vulcanization of Rubber Blends
inferred← citeshttps://doi.org/10.1002/masy.201300124openalex-snapshot
Shape Distortion of Carbon/Epoxy Composite Parts During Fabrication
inferred← citeshttps://doi.org/10.1002/masy.201650022openalex-snapshot
Measurement of Beer‐Lambert Attenuation Coefficient and Curing Kinetics Power Order: A Method Based on Rapid‐Scan FTIR During Laser Curing on an ATR
inferred← citeshttps://doi.org/10.1002/mats.200400089openalex-snapshot
Theoretical Modeling of the Phase Separation Dynamics in Blends of Reactive Monomers
inferred← citeshttps://doi.org/10.1002/mats.202500116openalex-snapshot
Numerical Simulation and Process Optimization of Injection‐Molded Silicone Rubber Cable Joints for High‐Voltage Applications
inferred← citeshttps://doi.org/10.1002/nme.1620300819openalex-snapshot
Simulation of the processing of thermoset polymers
inferred← citeshttps://doi.org/10.1002/nme.1620340302openalex-snapshot
Grapplings with the simulation of non‐Newtonian flows in polymer processing
inferred← citeshttps://doi.org/10.1002/pamm.200910136openalex-snapshot
Modelling and Simulation of Curing Processes of Epoxy Resin
inferred← citeshttps://doi.org/10.1002/pat.3505openalex-snapshot
Some new perspectives of anionic polyamide 6 (APA 6) synthesis
inferred← citeshttps://doi.org/10.1002/pc.10050openalex-snapshot
Modeling and simulation approaches in the resin transfer molding process: A review
inferred← citeshttps://doi.org/10.1002/pc.10270openalex-snapshot
Kinetic studies of thermoset cure reactions: A review
inferred← citeshttps://doi.org/10.1002/pc.10336openalex-snapshot
Stochastic analysis of isothermal cure of resin systems
inferred← citeshttps://doi.org/10.1002/pc.10356openalex-snapshot
Analysis of resin transfer/compression molding process
inferred← citeshttps://doi.org/10.1002/pc.10373openalex-snapshot
Processing induced residual stress in asymmetric laminate panels
inferred← citeshttps://doi.org/10.1002/pc.10378openalex-snapshot
Three‐dimensional simulations of the curing step in the resin transfer molding process
inferred← citeshttps://doi.org/10.1002/pc.10402openalex-snapshot
Measurement and prediction of the glass transition temperature during processing of copper‐clad epoxy resin systems
inferred← citeshttps://doi.org/10.1002/pc.10408openalex-snapshot
Heat transfer for pultrusion of a modified acrylic/glass reinforced composite
inferred← citeshttps://doi.org/10.1002/pc.10513openalex-snapshot
Effects of glass fibers and polypropylene/glass fiber hybrid fibers on the kinetics and mechanical properties of epoxy composites
inferred← citeshttps://doi.org/10.1002/pc.10531openalex-snapshot
Microwave and conventional curing of thick‐section thermoset composite laminates: Experiment and simulation
inferred← citeshttps://doi.org/10.1002/pc.10569openalex-snapshot
A kinetic model for free‐radical crosslinking co‐polymerization of styrene/vinylester resin
inferred← citeshttps://doi.org/10.1002/pc.20061openalex-snapshot
Curing and properties comparison of an unsaturated polyester resin, varying crosslinking reaction conditions
inferred← citeshttps://doi.org/10.1002/pc.20131openalex-snapshot
Experimental modeling of the cure behavior of a formulated blend of DGEBA epoxy and C12‐C14 glycidyl ether as a reactive diluent
inferred← citeshttps://doi.org/10.1002/pc.20342openalex-snapshot
Comparison of the curing kinetic behavior for two epoxy resin systems containing EPIKOTE 828–EPIKURE 3090 and DURATEK KLM 606A–DURATEK KLM 606B
inferred← citeshttps://doi.org/10.1002/pc.20517openalex-snapshot
Modelling of the chemo–rheological behavior of thermosetting polymer nanocomposites
inferred← citeshttps://doi.org/10.1002/pc.20571openalex-snapshot
Curing behavior and properties of epoxy nanocomposites with amine functionalized multiwall carbon nanotubes
inferred← citeshttps://doi.org/10.1002/pc.20710openalex-snapshot
Predicting the cure of thermosetting polymers: The isoconversion map
inferred← citeshttps://doi.org/10.1002/pc.20931openalex-snapshot
Curing behavior and physical properties of epoxy nanocomposites comprising amine‐functionalized carbon nanofillers
inferred← citeshttps://doi.org/10.1002/pc.22790openalex-snapshot
Proposal of an optimum cure cycle for filament winding process using a hybrid neural network ‐ first principles model
inferred← citeshttps://doi.org/10.1002/pc.24342openalex-snapshot
Reaction kinetics of polyfurfuryl alcohol bioresin and nanoparticles by 1H‐NMR transverse relaxation measurements
inferred← citeshttps://doi.org/10.1002/pc.25306openalex-snapshot
Dielectric analysis monitoring of thermoset curing with ionic liquids: From modeling to the prediction in the resin transfer molding process
inferred← citeshttps://doi.org/10.1002/pc.25685openalex-snapshot
Oxidation time effects of multiwalled carbon nanotubes on thermal, mechanical, and cure kinetics of epoxy‐based nanocomposites
inferred← citeshttps://doi.org/10.1002/pc.27120openalex-snapshot
Aspects of halloysite nanotubes integration in epoxy nanocomposites: Curing kinetics and deformation mechanism
inferred← citeshttps://doi.org/10.1002/pc.27510openalex-snapshot
Advancing on viscosity characterization and modeling of SMC for compression molding simulation
inferred← citeshttps://doi.org/10.1002/pc.70613openalex-snapshot
Strain Development During Cure of Partially Pre‐Cured Thermosetting Composites Measured With Distributed Fiber Optic Sensors
inferred← citeshttps://doi.org/10.1002/pc.70876openalex-snapshot
Modeling Effect of Thermal History on the Evolution of Residual Stress During Curing of Carbon Fiber‐Reinforced Polymer Composites
inferred← citeshttps://doi.org/10.1002/pc.750080609openalex-snapshot
The characterization of thermoset cure behavior by differential scanning calorimetry. Part I: Isothermal and Dynamic Study
inferred← citeshttps://doi.org/10.1002/pc.750150405openalex-snapshot
Predicting shrinkage and warpage of fiber‐reinforced composite parts
inferred← citeshttps://doi.org/10.1002/pen.10001openalex-snapshot
An alternative model for predicting the cure kinetics of a high temperature cure epoxy adhesive
inferred← citeshttps://doi.org/10.1002/pen.10391openalex-snapshot
Selection of adhesive system for radio‐frequency heating of structural sheet molding compound components
inferred← citeshttps://doi.org/10.1002/pen.10447openalex-snapshot
Chemorheology of thermosets—an overview
inferred← citeshttps://doi.org/10.1002/pen.10448openalex-snapshot
The effect of cure cycle of unsaturated polyester resin on the temperature and conversion profiles
inferred← citeshttps://doi.org/10.1002/pen.10471openalex-snapshot
Comparative study of the cure kinetics of an unsaturated polyester resin using different procedures
inferred← citeshttps://doi.org/10.1002/pen.10612openalex-snapshot
Chemorheology of a highly filled epoxy compound
inferred← citeshttps://doi.org/10.1002/pen.10708openalex-snapshot
Effects of inhibitors and retarders on low temperature free radical crosslinking polymerization between styrene and vinyl ester resin
inferred← citeshttps://doi.org/10.1002/pen.10772openalex-snapshot
Cure kinetics and physical properties of dicyanate/polyetherimide semi‐IPNs
inferred← citeshttps://doi.org/10.1002/pen.11175openalex-snapshot
Chemorheological analysis of an epoxy‐novolac molding compound
inferred← citeshttps://doi.org/10.1002/pen.11191openalex-snapshot
Relationship between isothermal and dynamic cure of thermosets via the isoconversion representation
inferred← citeshttps://doi.org/10.1002/pen.11199openalex-snapshot
Polyurethane and unsaturated polyester hybrid networks: Chemorheological and dielectric study for the resin transfer molding process (RTM)
inferred← citeshttps://doi.org/10.1002/pen.11220openalex-snapshot
Resin transfer molding (RTM) process of a high performance epoxy resin. I: Kinetic studies of cure reaction
inferred← citeshttps://doi.org/10.1002/pen.11380openalex-snapshot
Thermo‐chemical response of vinyl‐ester resin
inferred← citeshttps://doi.org/10.1002/pen.11719openalex-snapshot
Numerical analysis of promoted polyester and vinylester reinforced composites in RTM molds
inferred← citeshttps://doi.org/10.1002/pen.20234openalex-snapshot
Comparison of four methods for monitoring the kinetics of curing of a phenolic resin
inferred← citeshttps://doi.org/10.1002/pen.20274openalex-snapshot
Cure kinetics and modeling of an epoxy resin cross‐linked in the presence of two different diamine hardeners
inferred← citeshttps://doi.org/10.1002/pen.20309openalex-snapshot
Kinetic analysis and mechanical properties of nanoclay reinforced unsaturated polyester (UP) resins cured at low temperatures
inferred← citeshttps://doi.org/10.1002/pen.20340openalex-snapshot
Kinetic modeling of an unsaturated polyester resin using two complementary techniques: Near infrared spectroscopy and heat flux sensors
inferred← citeshttps://doi.org/10.1002/pen.20597openalex-snapshot
Curing behavior and structure of an epoxy/clay nanocomposite system
inferred← citeshttps://doi.org/10.1002/pen.20698openalex-snapshot
Modeling the vulcanization reaction of silicone rubber
inferred← citeshttps://doi.org/10.1002/pen.20842openalex-snapshot
Temperature, conversion, and phase separation profiles during mold cure of a modified vinyl‐ester resin
inferred← citeshttps://doi.org/10.1002/pen.21218openalex-snapshot
Simulation of chemical kinetics of elastomer crosslinking by organic peroxides
inferred← citeshttps://doi.org/10.1002/pen.21560openalex-snapshot
Cure advancement of urethane networks using a sigmoidal chemorheological model
inferred← citeshttps://doi.org/10.1002/pen.23183openalex-snapshot
Cure kinetics and thermal stability of micro and nanostructured thermosetting blends of epoxy resin and epoxidized styrene‐block‐butadiene‐block‐styrene triblock copolymer systems
inferred← citeshttps://doi.org/10.1002/pen.23270openalex-snapshot
Kinetic finite element model to optimize sulfur vulcanization: Application to extruded epdm weather‐strips
inferred← citeshttps://doi.org/10.1002/pen.23368openalex-snapshot
Preparation and physical properties of an epoxy nanocomposite with amine‐functionalized graphenes
inferred← citeshttps://doi.org/10.1002/pen.23596openalex-snapshot
Anisothermal thermosetting resin cure monitored by optical fiber refractometer
inferred← citeshttps://doi.org/10.1002/pen.24049openalex-snapshot
Vulcanization of EPDM rubber compounds with and without blowing agents: Identification of reaction events and TTT ‐diagram using DSC data
inferred← citeshttps://doi.org/10.1002/pen.24116openalex-snapshot
Cuprous oxide nanoparticles in epoxy network: Cure reaction, morphology, and thermal stability
inferred← citeshttps://doi.org/10.1002/pen.24463openalex-snapshot
Mechanism and kinetics of curing of diglycidyl ether of bisphenol a (DGEBA) resin by chitosan
inferred← citeshttps://doi.org/10.1002/pen.24638openalex-snapshot
Effect of dicumyl peroxide concentration on the polymerization kinetics of a polysilazane system
inferred← citeshttps://doi.org/10.1002/pen.24953openalex-snapshot
Wall Slip of Linear Polymer Melts During Ultrasonic‐assisted Micro‐injection Molding
inferred← citeshttps://doi.org/10.1002/pen.25063openalex-snapshot
Effect of carbon nanotubes content on the vulcanization kinetic in styrene–butadiene rubber compounds
inferred← citeshttps://doi.org/10.1002/pen.25148openalex-snapshot
Prediction of interfacial strength of HDPE overmolded with EPDM
inferred← citeshttps://doi.org/10.1002/pen.25618openalex-snapshot
A review of liquid silicone rubber injection molding: Process variables and process modeling
showing the first 200 of 1081 · page through all 1081
Editorial review for independent work. ICSAC — the Institute for Complexity
Science and Advanced Computing — runs a structured editorial panel for researchers
publishing outside journals, and publishes on CiteStamp rails. Submission is free
and goes through ORCID: icsacinstitute.org/submit.