Inferred edges come from two machine sources: sweeps of open repository
metadata (mostly SSRN and Zenodo), and a bulk OpenAlex citation snapshot. Every row below is
labelled with the one it came from. Neither is a complete citation index — absence here is not
evidence of absence.
Is this your work? Sign in with ORCID and put your name on the
claims that are yours.
Reference health. See whether every reference in this work resolves to a
known work and none has been retracted — and get a dated CiteStamped
badge you can embed.
Discussion of “The Relationship Between Oxide Grain Morphology and Growth Mechanisms for Fe‐Cr‐Al and Fe‐Cr‐Al‐Y Alloys” [F. A. Golightly, F. H. Stott, and G. C. Wood (pp. 1035–1042, Vol. 126, No. 6)]
Influence of the mode of introduction of a reactive element on the high temperature oxidation behavior of an alumina-forming alloy. Part III: The use of two stage oxidation experiments and in situ X-ray diffraction to understand the oxidation mechanisms
Adherence behavior of oxide grown in air and synthetic exhaust gas on Fe-Cr-Al alloys containing strong sulfide-forming elements: Ca, Mg, Y, Ce, La, Ti, and Zr
Improvement of the application of an electrochemical method for the determination of transport properties of an?-alumina scale. Part II: Influence of yttrium and palladium on alumina scales developed on a?-NiAl alloy
Critical issues concerning the mechanisms of duplex grain structure formation and interpretation of duplex nio grown on pure ni and cr doped substrates during high-temperature oxidation
Effects of change in growth mechanism due to Yttrium-addition in adhesion of alumina scale formed on Fe3Al alloy: Countercurrent diffusion modification model
Substrate Effect on the High-Temperature Oxidation Behavior of a Pt-Modified Aluminide Coating. Part I: Influence of the Initial Chemical Composition of the Coating Surface
Grain boundary oxidation in iron-based alloys, investigated by 18 O enriched water vapour – The effect of mixed oxides in binary and ternary Fe–{Al, Cr, Mn, Si} systems
A novel single-phase γ′ nanocrystalline coating with high resistance to oxidation and scale rumpling yet mitigated interdiffusion with the alloy substrate
High-temperature oxidation behavior of aluminum-added Cr-Cr2Ta two-phase alloys: Mechanism of aluminum influence and critical conditions for internal-external oxidation transition
Synchronous compositional and structural design of CrxAly coating enabling ultrahigh oxidation resistance of Cr-based coating on Zr alloys at 900–1200 °C
Determination of the oxide scale growth mechanism using 18O-tracer experiments in combination with Transmission Electron Microscopy and nanoscale Secondary Ion Mass Spectrometry
Microstructural evolution of duplex grain structure and interpretation of the mechanism for NiO scales grown on pure Ni- and Cr-doped substrates during high temperature oxidation
The role of reactive elements in oxide scale adhesion
showing the first 200 of 262
Editorial review for independent work. ICSAC — the Institute for Complexity
Science and Advanced Computing — runs a structured editorial panel for researchers
publishing outside journals, and publishes on CiteStamp rails. Submission is free
and goes through ORCID: icsacinstitute.org/submit.