On the public citation graph
Effects and mechanisms of grain refinement in aluminium alloys
0 signed · 201 inferred · view as graph
Inferred edges come from two machine sources: sweeps of open repository metadata (mostly SSRN and Zenodo), and a bulk OpenAlex citation snapshot. Every row below is labelled with the one it came from. Neither is a complete citation index — absence here is not evidence of absence.
Is this your work? Sign in with ORCID and put your name on the
claims that are yours.
Reference health. See whether every reference in this work resolves to a
known work and none has been retracted — and get a dated CiteStamped
badge you can embed.
What this work says
Outgoing claims: the papers this work cites, builds on, or argues with.
inferredcites →https://doi.org/10.1007/bf00351320openalex-snapshot
Metallographic investigation of TiC nucleants in the newly developed Al-Ti-C grain refiner
inferredcites →https://doi.org/10.1007/bf02643037openalex-snapshot
The constitution of the system Al-Ti-B with reference to aluminum-base alloys
inferredcites →https://doi.org/10.1007/bf02645112openalex-snapshot
The Grain Refining of Aluminum and Phase Relationships in the Al-Ti-B System
inferredcites →https://doi.org/10.1007/bf02645911openalex-snapshot
Development of Al-Ti-C grain refiners containing TiC
inferredcites →https://doi.org/10.1007/bf02647010openalex-snapshot
Discussion of “On the free energy of formation of TiC and Al4C3”
inferredcites →https://doi.org/10.1007/bf02648983openalex-snapshot
Studies on addition of inclusions to molten aluminum using a novel technique
inferredcites →https://doi.org/10.1007/bf02649476openalex-snapshot
The role of boron in the grain Refinement of Aluminum with Titanium
inferredcites →https://doi.org/10.1007/bf02650269openalex-snapshot
Thermodynamic consideration of grain refinement of aluminum alloys by titanium and carbon
inferredcites →https://doi.org/10.1007/bf02654921openalex-snapshot
Factors affecting the grain-refinement of aluminum using titanium and boron additives
inferredcites →https://doi.org/10.1007/bf02657335openalex-snapshot
Study of the mechanism of grain refinement of aluminum after additions of Ti- and B-containing master alloys
inferredcites →https://doi.org/10.1007/bf02663335openalex-snapshot
Grain refinement in aluminum alloyed with titanium and boron
inferredcites →https://doi.org/10.1007/bf02819272openalex-snapshot
The nucleation of aluminum grains in alloys of aluminum with titanium and boron
inferredcites →https://doi.org/10.1007/s11661-999-0098-5openalex-snapshot
Grain refinement of aluminum alloys: Part I. the nucleant and solute paradigms—a review of the literature
inferredcites →https://doi.org/10.1016/0040-6031(94)02167-mopenalex-snapshot
Grain refinement of aluminium studied by use of a thermal analytical technique
inferredcites →https://doi.org/10.1016/0921-5093(94)90559-2openalex-snapshot
Heterogeneously nucleated α-Al in amorphous aluminium alloys
inferredcites →https://doi.org/10.1016/0921-5093(94)90858-3openalex-snapshot
Enhanced heterogeneous nucleation of α-Al in amorphous aluminium alloys
inferredcites →https://doi.org/10.1016/0956-7151(94)00405-7openalex-snapshot
Mechanism of grain refinement in aluminium
inferredcites →https://doi.org/10.1016/s0924-0136(96)02536-8openalex-snapshot
Effects of processing parameters on the performance of Al grain refinement master alloys AlTi and AlB in small ingots
inferredcites →https://doi.org/10.1051/jphys:0198700480109300openalex-snapshot
Electron correlations and chemical bonds in aggregates of monovalent elements. A poor man's description
inferredcites →https://doi.org/10.1179/030716982803286368openalex-snapshot
Intermetallic particles in Al–Ti–B–type master alloys for grain refinement of aluminium
inferredcites →https://doi.org/10.1179/imr.1989.34.1.247openalex-snapshot
Grain refining of aluminium and its alloys using inoculants
inferredcites →https://doi.org/10.1179/mst.1995.11.6.533openalex-snapshot
Effect of alloy variables on grain refinement of binary aluminium alloys with Al–Ti–B
inferredcites →https://doi.org/10.1515/ijmr-1996-870312openalex-snapshot
The Influence of Composition on Equiaxed Crystal Growth Mechanisms and Grain Size in Al Alloys
inferredcites →https://doi.org/10.31399/asm.tb.pdub.t53420429openalex-snapshot
Fundamentals of Solidification
inferredcites →https://doi.org/10.4028/www.scientific.net/rc.35openalex-snapshot
Fundamentals of Solidification
What points at this work
Incoming claims: where this work appears in other papers’ reference lists and arguments.
inferred← citeshttps://doi.org/10.2139/ssrn.4653840openalex-extracted
A Study on Grain Refinement of Aluminum Alloy 7175 by Adding Strontium
inferred← citeshttps://doi.org/10.1002/9781118359259.ch57openalex-snapshot
Thermal Analysis and Microstructures of Modified Grain‐Refined Al‐7Si‐Mg Cast Alloy
inferred← citeshttps://doi.org/10.1002/9781119093435.ch51openalex-snapshot
Grain Refinement Behavior of Al‐Zn‐Si Alloy by Inoculation in Hot‐Dip Coating
inferred← citeshttps://doi.org/10.1002/9781119274780.ch118openalex-snapshot
Grain Refinement of Self‐Hardening Aluminum Alloys
inferred← citeshttps://doi.org/10.1002/adem.202000322openalex-snapshot
A Critical Review on Synthesis of Aluminum Metallic Composites through Stir Casting: Challenges and Opportunities
inferred← citeshttps://doi.org/10.1007/978-3-030-36408-3_22openalex-snapshot
Molecular Dynamics Simulations of the Solidification of Pure Aluminium
inferred← citeshttps://doi.org/10.1007/978-3-031-22532-1_63openalex-snapshot
Effect of Ti Addition on the Microstructure and Mechanical Properties of Hypo-Eutectic and Eutectic Al–Si Alloys
inferred← citeshttps://doi.org/10.1007/978-3-031-50308-5_33openalex-snapshot
Investigation Effect of In-Situ Grain Refiners on the 1XXX and 3XXX Twin Roll Casted Aluminum Products
inferred← citeshttps://doi.org/10.1007/978-3-319-48179-1_57openalex-snapshot
Thermal Analysis and Microstructures of Modified Grain-Refined Al-7Si-Mg Cast Alloy
inferred← citeshttps://doi.org/10.1007/978-3-319-48248-4_51openalex-snapshot
Grain Refinement Behavior of Al-Zn-Si Alloy by Inoculation in Hot-Dip Coating
inferred← citeshttps://doi.org/10.1007/978-3-319-48251-4_118openalex-snapshot
Grain refinement of self-hardening aluminum alloys
inferred← citeshttps://doi.org/10.1007/978-981-15-8319-3_85openalex-snapshot
Mechanical Behavior Investigation of Copper-Added A356 Alloy
inferred← citeshttps://doi.org/10.1007/s00170-022-10590-9openalex-snapshot
Grain refinement in semi-solid metal processing: current status and recent development
inferred← citeshttps://doi.org/10.1007/s10973-022-11674-0openalex-snapshot
Enthalpy balance of process path of the sheet production from EN AW 5182 aluminium alloy
inferred← citeshttps://doi.org/10.1007/s11015-018-0684-0openalex-snapshot
Technology for Modifying Aluminum Alloys with Ultrafine Silicon
inferred← citeshttps://doi.org/10.1007/s11661-011-0689-9openalex-snapshot
Evaluation of Al-Ti-C Master Alloys as Grain Refiner for Aluminum and Its Alloys
inferred← citeshttps://doi.org/10.1007/s11661-013-1747-2openalex-snapshot
The Effect of Ti on Mechanical Properties of Extruded In-Situ Al-15 pct Mg2Si Composite
inferred← citeshttps://doi.org/10.1007/s11661-018-4787-9openalex-snapshot
Influence of Grain Refinement on Slurry Formation and Surface Segregation in Semi-solid Al-7Si-0.3Mg Castings
inferred← citeshttps://doi.org/10.1007/s11663-016-0824-5openalex-snapshot
Potential of an Al-Ti-MgAl2O4 Master Alloy and Ultrasonic Cavitation in the Grain Refinement of a Cast Aluminum Alloy
inferred← citeshttps://doi.org/10.1007/s11663-022-02700-5openalex-snapshot
Microstructure and Mechanical Properties of Cooling Slope Rheocast Al-7Si-0.3Mg Alloy and Development of a Rheo Pressure Die Cast Knuckle Housing
inferred← citeshttps://doi.org/10.1007/s11663-023-02768-7openalex-snapshot
Effect of Melt Treatment on Microstructure Evolution and Coarsening Mechanism of A356 Al Alloy During Cooling Slope Rheoprocessing
inferred← citeshttps://doi.org/10.1007/s11665-018-3657-3openalex-snapshot
Corrosion Behavior of B and Ti Grain-Refined Sr-Modified A356
inferred← citeshttps://doi.org/10.1007/s11665-021-06413-9openalex-snapshot
Effect of Grain Refiner on Microstructural Feature Influence Hardness and Tensile Properties of Al-7Si Alloy
inferred← citeshttps://doi.org/10.1007/s11665-022-06727-2openalex-snapshot
Effect of Ti Content on Microstructure and Mechanical Properties of Mg-Sn Alloys Produced by Casting and Hot Extrusion
inferred← citeshttps://doi.org/10.1007/s11665-024-09477-5openalex-snapshot
Design of Non-Heat Treatable High Pressure Die Casting Al Alloys: A Review
inferred← citeshttps://doi.org/10.1007/s11837-014-0944-9openalex-snapshot
Influence of Refiner in ZA-12 Alloys During Centrifugal Casting Process
inferred← citeshttps://doi.org/10.1007/s11837-024-06452-2openalex-snapshot
Exploration of TiAl3 Phase Nucleation Mechanism in Al–5Ti–B Master Alloy
inferred← citeshttps://doi.org/10.1007/s12540-011-0003-9openalex-snapshot
High temperature deformation behavior of Mg-Sn(-Zn) alloy
inferred← citeshttps://doi.org/10.1007/s12540-015-1012-xopenalex-snapshot
Investigation on the mechanism of grain refinement in aluminum alloy solidified under ultrasonic vibration
inferred← citeshttps://doi.org/10.1007/s12598-014-0426-9openalex-snapshot
Constitutive equation and hot processing maps of Al–5Ti–1B master alloy
inferred← citeshttps://doi.org/10.1007/s12613-017-1467-5openalex-snapshot
Effect of vanadium carbide on commercial pure aluminum
inferred← citeshttps://doi.org/10.1007/s12666-012-0140-yopenalex-snapshot
Solidification Characteristics and Forgeability of Aluminium Alloy Metal Matrix Composites
inferred← citeshttps://doi.org/10.1007/s12666-022-02607-4openalex-snapshot
Effect of Addition of Grain Refiner and Modifier on Microstructural and Mechanical Properties of Squeeze Cast A356 Alloy
inferred← citeshttps://doi.org/10.1007/s13632-022-00855-wopenalex-snapshot
Comparative Study of Microstructure and Properties of Hypoeutectic Al-Si Alloys Being Cast With and Without Melt Thermal Treatment
inferred← citeshttps://doi.org/10.1007/s13632-026-01328-0openalex-snapshot
Microstructural Evolution of Al-Si Alloys with Varying Magnesium Content Prepared by Direct Thermal Method
inferred← citeshttps://doi.org/10.1007/s13632-026-01342-2openalex-snapshot
Microstructural Analysis of Zr-Added 7075 Aluminum Alloy in Both As-Cast and Heat-Treated Conditions
inferred← citeshttps://doi.org/10.1007/s40033-015-0091-7openalex-snapshot
Synthesis and Characterization of TiB2 Reinforced Aluminium Matrix Composites: A Review
inferred← citeshttps://doi.org/10.1007/s40033-021-00311-zopenalex-snapshot
Impact of Hot Rolling on Mechanical Characteristics of AA7075/TiB2/Graphite Hybrid Composites
inferred← citeshttps://doi.org/10.1007/s40033-023-00536-0openalex-snapshot
A Comparative Study on Abrasive Wear Behavior of TiB2/Graphite Reinforced Cast and Hot Rolled Al7075-Based Hybrid MMCs
inferred← citeshttps://doi.org/10.1007/s40684-021-00339-2openalex-snapshot
Functional and Environmental Advantage of Cleaning Ti5B1 Master Alloy
inferred← citeshttps://doi.org/10.1007/s40962-020-00447-wopenalex-snapshot
Enhancing the Mechanical Properties of Si Particle Reinforced ZA22 Composite by Ti–B Modification
inferred← citeshttps://doi.org/10.1007/s40962-025-01729-xopenalex-snapshot
Effect of Grain Size on Machinability and Corrosion Behavior of CuZn19Al6 Aircraft Bronze Alloy
inferred← citeshttps://doi.org/10.1007/s40962-025-01787-1openalex-snapshot
Investigating the Effect of Cooling Rate and Nucleation on the Microstructure and Tensile Strength of Alloy 6061
inferred← citeshttps://doi.org/10.1007/s41230-017-6130-2openalex-snapshot
Effects of minor Y, Zr and Er addition on microstructure and properties of Al-5Cu-0.4Mn alloy
inferred← citeshttps://doi.org/10.1016/j.acme.2016.12.006openalex-snapshot
Microstructure and mechanical behaviour of in situ fabricated AA6061–TiC metal matrix composites
inferred← citeshttps://doi.org/10.1016/j.actamat.2007.05.028openalex-snapshot
Coarsening of grain-refined semi-solid Al–Ge32 alloy: X-ray microtomography and in situ radiography
inferred← citeshttps://doi.org/10.1016/j.actamat.2010.10.017openalex-snapshot
Ambient- and high-temperature mechanical properties of isochronally aged Al–0.06Sc, Al–0.06Zr and Al–0.06Sc–0.06Zr (at.%) alloys
inferred← citeshttps://doi.org/10.1016/j.actamat.2023.119455openalex-snapshot
Synthesis and characterization of (Al,Si)3(Zr,Ti)-D022/D023 intermetallics: Understanding the stability of silicon substitution
inferred← citeshttps://doi.org/10.1016/j.aej.2016.03.016openalex-snapshot
Grain refinement of ASTM A356 aluminum alloy using sloping plate process through gravity die casting
inferred← citeshttps://doi.org/10.1016/j.apsusc.2013.03.043openalex-snapshot
Microstructural evolution and hardness of TiAl3 and TiAl2 phases on Ti–45Al–2Nb–2Mn–1B by plasma pack aluminizing
inferred← citeshttps://doi.org/10.1016/j.ijheatmasstransfer.2019.05.048openalex-snapshot
Determination some thermo-physical and metallurgical properties of aluminum alloys using their known chemical composition
inferred← citeshttps://doi.org/10.1016/j.ijhydene.2013.10.095openalex-snapshot
Effect of Ti on the microstructure and Al–water reactivity of Al-rich alloy
inferred← citeshttps://doi.org/10.1016/j.ijhydene.2021.09.241openalex-snapshot
Active aluminum composites and their hydrogen generation via hydrolysis reaction: A review
inferred← citeshttps://doi.org/10.1016/j.ijrmhm.2025.107637openalex-snapshot
Lightweight diamond/WC–Co composites achieve synergistic hardness-toughness enhancement via high-pressure sintering
inferred← citeshttps://doi.org/10.1016/j.jallcom.2014.07.094openalex-snapshot
The 450 °C and 600 °C isothermal sections of the Zn–Ti–Si system
inferred← citeshttps://doi.org/10.1016/j.jallcom.2017.06.032openalex-snapshot
Non-deformation recrystallization of metal with electric current stressing
inferred← citeshttps://doi.org/10.1016/j.jallcom.2019.153089openalex-snapshot
Influence of a new AlTiC–B master alloy on the casting and extruding behaviors of 7050 alloys
inferred← citeshttps://doi.org/10.1016/j.jallcom.2023.169805openalex-snapshot
The impact of Ce-containing precipitates on the solidification behavior, microstructure, and mechanical properties of Al-6063
inferred← citeshttps://doi.org/10.1016/j.jallcom.2024.174412openalex-snapshot
Effects of Co on the microstructure evolution and mechanical properties of Ti-4Al-6Cr-5Mo-8 Nb alloy by ultrasonic vacuum melting
inferred← citeshttps://doi.org/10.1016/j.jallcom.2025.178500openalex-snapshot
Microstructural modification in an Al-Mg-Si (6082) alloy with high Fe content using inoculation and/or high-intensity ultrasonication
inferred← citeshttps://doi.org/10.1016/j.jallcom.2025.183914openalex-snapshot
Grain refining and fading mechanisms in a eutectic Al-Si alloy refined with Al-Nb-B
inferred← citeshttps://doi.org/10.1016/j.jmst.2020.04.008openalex-snapshot
Effects of AlCoCrFeNiTi high-entropy alloy on microstructure and mechanical properties of pure aluminum
inferred← citeshttps://doi.org/10.1016/j.jnucmat.2021.153480openalex-snapshot
Effect of yttrium content on microstructure and irradiation behavior of V-4Cr-4Ti-xY alloys
inferred← citeshttps://doi.org/10.1016/j.matchar.2008.01.008openalex-snapshot
The influence of TiB2 particles on the effectiveness of Al–3Ti–0.15C grain refiner
inferred← citeshttps://doi.org/10.1016/j.matchar.2011.11.005openalex-snapshot
Effects of Sc content on the microstructure of As-Cast Al-7wt.% Si alloys
inferred← citeshttps://doi.org/10.1016/j.matchar.2024.113659openalex-snapshot
TiN refinement and resultant grain refinement in magnesium-treated ultra-pure ferritic stainless steel
inferred← citeshttps://doi.org/10.1016/j.matchar.2025.115399openalex-snapshot
In situ observation of eutectic and primary TiB formation and their thermodynamic and kinetic mechanisms during the solidification of titanium alloys
inferred← citeshttps://doi.org/10.1016/j.matdes.2009.09.002openalex-snapshot
Production of Al–Ti–C grain refiners with the addition of elemental carbon
inferred← citeshttps://doi.org/10.1016/j.matdes.2010.02.007openalex-snapshot
Grain refinement of AA333 aluminium cast alloy by Al–Ti granulated flux
inferred← citeshttps://doi.org/10.1016/j.matdes.2011.01.008openalex-snapshot
Microstructure and mechanical properties of dissimilar materials joints between T92 martensitic and S304H austenitic steels
inferred← citeshttps://doi.org/10.1016/j.matdes.2013.11.058openalex-snapshot
Effect of grain refiner on the tensile and impact properties of Al–Si–Mg cast alloys
inferred← citeshttps://doi.org/10.1016/j.matdes.2023.111879openalex-snapshot
Microstructural features and thermal response of granulated Al and A356 alloy with relevant Sn additions
inferred← citeshttps://doi.org/10.1016/j.matlet.2005.10.010openalex-snapshot
The role of Si and Ti additions on the formation of the alloy layer at the interface of hot-dip Al–Zn coatings on steel strips
inferred← citeshttps://doi.org/10.1016/j.matpr.2018.06.130openalex-snapshot
Effect of TiB2 on Mechanical and Tribological Properties of Aluminium Alloys – A Review
inferred← citeshttps://doi.org/10.1016/j.matpr.2018.10.152openalex-snapshot
Tribological Characteristics of Stir-Cast Al-TiB2 Metal Matrix Composites in Lubricated Condition Using Taguchi Based Grey Relation Analysis
inferred← citeshttps://doi.org/10.1016/j.matpr.2019.12.027openalex-snapshot
Development of duralumin alloy and its microstructural characterization by using grain refiner
inferred← citeshttps://doi.org/10.1016/j.matpr.2020.04.544openalex-snapshot
Effect of TiC addition on the mechanical properties and microstructure of Al-Si alloy
inferred← citeshttps://doi.org/10.1016/j.matpr.2020.08.719openalex-snapshot
Experimental investigation on the effect of microstructure modifiers and heat treatment influence on A356 alloy
inferred← citeshttps://doi.org/10.1016/j.matpr.2020.10.684openalex-snapshot
Study of Al-Si alloys grain refinement by inoculation
inferred← citeshttps://doi.org/10.1016/j.matpr.2020.11.207openalex-snapshot
Effects of Si addition on as-cast characteristics of Al-12Zn-6Mg-1Cu-xSi composites with 7.5 vol% ZrO2 produced by squeeze casting
inferred← citeshttps://doi.org/10.1016/j.micron.2013.10.005openalex-snapshot
A novel approach to accelerate the reaction between Ti and Al
inferred← citeshttps://doi.org/10.1016/j.msea.2006.03.018openalex-snapshot
Grain refining performance for Al and Al–Si alloy casts by addition of equal-channel angular pressed Al–5 mass% Ti alloy
inferred← citeshttps://doi.org/10.1016/j.msea.2012.01.072openalex-snapshot
Determination of the growth restriction factor and grain size for aluminum alloys by a quasi-binary equivalent method
inferred← citeshttps://doi.org/10.1016/j.msea.2012.08.031openalex-snapshot
Effects of small amount of active Ti element additions on microstructure and property of Sn3.5Ag0.5Cu solder
inferred← citeshttps://doi.org/10.1016/j.msea.2012.11.082openalex-snapshot
Effect of equal channel angular pressing on microstructure and grain refining performance of Al–5%Ti master alloy
inferred← citeshttps://doi.org/10.1016/j.msea.2013.10.032openalex-snapshot
The influence of Ti on the microstructure and tensile properties of cast Al–4.5Cu–0.3Mg alloy
inferred← citeshttps://doi.org/10.1016/j.msea.2018.09.104openalex-snapshot
Influence of hot rolling on microstructure and mechanical behaviour of Al6061-ZrB2 in-situ metal matrix composites
inferred← citeshttps://doi.org/10.1016/j.mspro.2014.07.299openalex-snapshot
Effect of Electromagnetic Induction and Heat Treatment on the Mechanical and Wear Properties of LM25 Alloy
inferred← citeshttps://doi.org/10.1016/j.paerosci.2012.04.001openalex-snapshot
Advances in gamma titanium aluminides and their manufacturing techniques
inferred← citeshttps://doi.org/10.1016/j.rinma.2022.100341openalex-snapshot
Directed energy deposition of AA7075 - Effect of TiC nanoparticles on microstructure
inferred← citeshttps://doi.org/10.1016/j.rinp.2019.02.041openalex-snapshot
Study of microstructure and mechanical properties of A713 aluminium alloy having an addition of grain refiners Al-3.5 Ti-1.5C and Al-3Cobalt
inferred← citeshttps://doi.org/10.1016/j.scriptamat.2021.114277openalex-snapshot
Alloy design strategy for microstructural-tailored scandium-modified aluminium alloys for additive manufacturing
inferred← citeshttps://doi.org/10.1016/j.surfcoat.2016.04.074openalex-snapshot
The role of Ti and Si in the nucleation of α-Al during hot dip coating of steel with Al–43.4wt.%Zn–1.6wt.%Si alloy
inferred← citeshttps://doi.org/10.1016/j.tramat.2026.100340openalex-snapshot
Multimodal adaptive machine learning to assist design of non-heat treatable high pressure die-casting Al-Si alloys
inferred← citeshttps://doi.org/10.1016/j.vacuum.2017.12.037openalex-snapshot
Effect of alloy composition on hot deformation behavior of some Al-Mg-Si alloys
inferred← citeshttps://doi.org/10.1016/j.vacuum.2025.114370openalex-snapshot
Mechanism study of grain evolution during isothermal heating using in-situ electron backscatter diffraction
inferred← citeshttps://doi.org/10.1016/s1003-6326(10)60496-7openalex-snapshot
Microstructures and mechanical properties of Mg-2%Zn-0.4%RE alloys
inferred← citeshttps://doi.org/10.1016/s1003-6326(13)62631-xopenalex-snapshot
Enhanced grain refinement of cast aluminum alloy by thermal and mechanical treatment of Al-5Ti-B master alloy
inferred← citeshttps://doi.org/10.1021/acsami.4c09954openalex-snapshot
On-the-Fly Machine Learning Force Field Study of Liquid-Al/Solid-TiB 2 Interfaces
inferred← citeshttps://doi.org/10.1038/s41598-025-19756-3openalex-snapshot
Machine learning-driven nonlinear analysis of inclusion effects in aluminium alloys
inferred← citeshttps://doi.org/10.1051/e3sconf/201913001023openalex-snapshot
Effect of T6 on Mechanical Properties of TiB and Sr Modified ADC12/SiC Composite Produced by Stir Casting
inferred← citeshttps://doi.org/10.1051/matecconf/20167801001openalex-snapshot
Corrosion Characterisation of Al-Cu Reinforced In-Situ TiB2
inferred← citeshttps://doi.org/10.1051/matecconf/202237004005openalex-snapshot
Effect of Grain Refining on the Shrinkage Porosity in Thin-Walled Plates Produced by Investment Casting Integrating Controlled Solidification Technique
inferred← citeshttps://doi.org/10.1063/5.0001984openalex-snapshot
Effect of SiC particles on mechanical properties of aluminum ADC12 composite through stir casting process
inferred← citeshttps://doi.org/10.1063/5.0189212openalex-snapshot
The effects of different cooling rate conditions on the thermal profile and microstructure of Al-Si alloy with magnesium addition
inferred← citeshttps://doi.org/10.1080/00084433.2024.2427457openalex-snapshot
Study on grain refinement of AlB 2 structure in aluminium alloys
inferred← citeshttps://doi.org/10.1080/02670836.2019.1629526openalex-snapshot
Microstructure and refinement mechanism of TiB 2 /TiAl 3 in remelted Al-5Ti-1B system
inferred← citeshttps://doi.org/10.1080/02726351.2010.498035openalex-snapshot
Effect of Celestite-Calcite Mineralogy on Their Separation by Attrition Scrubbing
inferred← citeshttps://doi.org/10.1080/10426914.2013.852212openalex-snapshot
Semisolid Processing of A380 Al Alloy Using Cooling Slope
inferred← citeshttps://doi.org/10.1080/13640461.2016.1144698openalex-snapshot
The effect of simultaneous refinement and modification by cerium on microstructure and mechanical properties of Al-8% Si alloy
inferred← citeshttps://doi.org/10.1088/1757-899x/117/1/012046openalex-snapshot
Control of solidification microstructure using programmable electro-magnetic pulses
inferred← citeshttps://doi.org/10.1088/1757-899x/200/1/012029openalex-snapshot
Grain refinement of 7075Al alloy microstructures by inoculation with Al-Ti-B master alloy
inferred← citeshttps://doi.org/10.1088/1757-899x/426/1/012048openalex-snapshot
The examination of the grain refining effects of titanium in case of AlSi7MgCu0.5 alloy
inferred← citeshttps://doi.org/10.1088/1757-899x/673/1/012129openalex-snapshot
Characteristics of aluminum AC4B with variations of silicon nitride reinforced composite produced by a stir casting process
inferred← citeshttps://doi.org/10.1088/2053-1591/ac0559openalex-snapshot
Precipation of TiAl3 in remelting Al-5Ti-1B and the grain refinement of 7050 alloy
inferred← citeshttps://doi.org/10.1088/2053-1591/ac99c1openalex-snapshot
Grain refinement and eutectic modification of A356 casting alloy by adding Al-B-Sr master alloys and its effect on tensile properties
inferred← citeshttps://doi.org/10.1089/3dp.2021.0055openalex-snapshot
Effect of Alloying Powders on Microstructure and Mechanical Properties of Aluminum Alloy Arc Additive Manufacturing
inferred← citeshttps://doi.org/10.1089/3dp.2022.0152openalex-snapshot
In Situ Reactive Printing of Aluminum Matrix Composite with Ultra-High Volume Fraction Reinforcement
inferred← citeshttps://doi.org/10.1109/chuser.2011.6163822openalex-snapshot
Microstructure and mechanical properties of Al-Si cast alloy grain refined with Ti-B-Sr-Sc-Mg
inferred← citeshttps://doi.org/10.11606/t.3.2019.tde-18072019-082545openalex-snapshot
Estudo da fundição em aluminetos de ferro.
inferred← citeshttps://doi.org/10.1179/026708303225002811openalex-snapshot
In situfabrication of titanium carbide reinforced copper MMC
inferred← citeshttps://doi.org/10.1179/1743133612y.0000000005openalex-snapshot
Superheat influence on mechanical properties of cast hypoeutectic aluminium–silicon alloy
inferred← citeshttps://doi.org/10.1179/1743133612y.0000000038openalex-snapshot
Impact of intermetallic precipitates on the tribological and/or corrosion performance of cast aluminium alloys: a short review
inferred← citeshttps://doi.org/10.1179/1743133614y.0000000109openalex-snapshot
On thermal analysis, macrostructure and microstructure of grain refined Al–Si–Mg cast alloys: role of Sr addition
inferred← citeshttps://doi.org/10.1179/1743133614y.0000000136openalex-snapshot
Modification of microstructures for hypoeutectic, eutectic and hypereutectic Al–Cu binary alloys
inferred← citeshttps://doi.org/10.1371/journal.pone.0341127openalex-snapshot
Synergistic enhancement of Al-Si7Mg alloy: Strengthening mechanical properties through combined electromagnetic agitation and AL-10%Ti refinement
inferred← citeshttps://doi.org/10.14279/depositonce-3811openalex-snapshot
Grain refinement in aluminium GTA welds
inferred← citeshttps://doi.org/10.1515/afe-2016-0045openalex-snapshot
Effect of Titanium and Boron on the Stability of Grain Refinement of Al-Cu Alloy
inferred← citeshttps://doi.org/10.1515/afe-2017-0066openalex-snapshot
Primary Structure and Mechanical Properties of AlSi2 Alloy Continuous Ingots
inferred← citeshttps://doi.org/10.1520/mpc20170011openalex-snapshot
Heat Treatments for Aluminum Alloys: When, Why and How
inferred← citeshttps://doi.org/10.1522/030043986openalex-snapshot
Effect of grain refiner-modifier interaction on the performance of A356.2 alloy /
inferred← citeshttps://doi.org/10.1522/24605513openalex-snapshot
Effets de l'augmentation de la teneur en titane sur l'affinage des grains de l'alliage A356.2 /
inferred← citeshttps://doi.org/10.21062/ujep/x.2013/a/1213-2489/mt/13/1/39openalex-snapshot
Using of Thermal Analysis in the Industrial Practice - Consumption Reduction of Grain-Refinement Master Alloy and Optimization of Computer Simulation Results
inferred← citeshttps://doi.org/10.21608/amme.2014.35573openalex-snapshot
GRAIN REFINEMENT OF ALUMINUM-BASED NANOCOMPOSITES
inferred← citeshttps://doi.org/10.22201/icat.24486736e.2021.19.3.1687openalex-snapshot
Microstructural and corrosion study of aluminum foams obtained by space holder process using low-cost removable preforms
inferred← citeshttps://doi.org/10.2320/matertrans.m2013213openalex-snapshot
Effects of Ti Addition into Core Alloy on Forming and Brazing Characteristics of 4343/3003/4343 Aluminum Alloy Clad Sheets
inferred← citeshttps://doi.org/10.2355/isijinternational.54.1601openalex-snapshot
Phase Field Simulation of Equiaxed Microstructure Formation during Semi-solid Processing of A380 Al Alloy
inferred← citeshttps://doi.org/10.24425/amm.2019.127607openalex-snapshot
The Impact of AL-TI-B Grain-Refiners from Different Manufacturers on Wrought AL-alloy
inferred← citeshttps://doi.org/10.24857/rgsa.v19n12-045openalex-snapshot
Industrial-Scale Assessment of Grain Refinement Efficiency in al-6201 Alloy Using al-5ti-1b Additions
inferred← citeshttps://doi.org/10.29109/gujsc.1165103openalex-snapshot
Al7075 Alaşımına İlave Edilen Al-5Ti-1B Tane İncelticinin Yaşlanma, Mikroyapı, Sertlik ve Korozif Özellikleri Üzerindeki Etkisi
inferred← citeshttps://doi.org/10.3103/s1061386218040052openalex-snapshot
SHS-Produced Al–Ti–B Master Alloys: Performance in Commercial Al Alloy
inferred← citeshttps://doi.org/10.3103/s1067821210010128openalex-snapshot
Grain size and porosity of cast hypoeutectic aluminium-silicon alloys in hexachloroethane coated mould
inferred← citeshttps://doi.org/10.3139/146.101249openalex-snapshot
Criteria for developing castable, creep-resistant aluminum-based alloys – A review
inferred← citeshttps://doi.org/10.31399/asm.hb.v11a.a0006831openalex-snapshot
Failures Related to Castings
inferred← citeshttps://doi.org/10.31399/asm.tb.ascaam.t59190001openalex-snapshot
Cast Aluminum-Silicon Alloy—Phase Constituents and Microstructure
inferred← citeshttps://doi.org/10.3389/fmats.2022.1100566openalex-snapshot
The influence of the modifying elements on the microstructure, mechanical, and deformation properties of aluminum alloys
inferred← citeshttps://doi.org/10.3390/ma10030238openalex-snapshot
Effect of Cooling Rate on Morphology of TiAl3 Particles in Al–4Ti Master Alloy
inferred← citeshttps://doi.org/10.3390/ma13081983openalex-snapshot
Effects of Mn, Zn Additions and Cooling Rate on Mechanical and Corrosion Properties of Al-4.6Mg Casting Alloys
inferred← citeshttps://doi.org/10.3390/ma15061984openalex-snapshot
Morphological Evolution of TiB2 and TiAl3 in Al–Ti–B Master Alloy Using Different Ti Adding Routes
inferred← citeshttps://doi.org/10.3390/ma15072503openalex-snapshot
Heat Treatment Influencing Porosity and Tensile Properties of Field Assisted Sintered AlSi7Mg0.6
inferred← citeshttps://doi.org/10.3390/ma15217712openalex-snapshot
Study on Symmetry and Asymmetry Rolling of AA2519-T62 Alloy at Room-Temperature and Cryogenic Conditions
inferred← citeshttps://doi.org/10.3390/ma16165639openalex-snapshot
A Review on the Analysis of Thermal and Thermodynamic Aspects of Grain Refinement of Aluminum-Silicon-Based Alloys
inferred← citeshttps://doi.org/10.3390/ma9110869openalex-snapshot
Grain Refinement Efficiency in Commercial-Purity Aluminum Influenced by the Addition of Al-4Ti Master Alloys with Varying TiAl3 Particles
inferred← citeshttps://doi.org/10.3390/met13121917openalex-snapshot
Silicon Poisoning and Effects of Tantalum on AlSi Alloys
inferred← citeshttps://doi.org/10.3390/met14091050openalex-snapshot
The Influence of the Combined Addition of La–Ce Mixed Rare Earths and Sr on the Microstructure and Mechanical Properties of AlSi10MnMg Alloy
inferred← citeshttps://doi.org/10.3390/met9070781openalex-snapshot
Ultrasonic Vibration as a Primary Mixing Tool in Accelerating Aluminum–Copper Alloys Preparation from Their Pure Elements
inferred← citeshttps://doi.org/10.37934/araset.30.2.1928openalex-snapshot
The Effect of Scandium (Sc) onto Mechanical Properties and Morphologies of Aluminium-Silicon (Al-Si) Alloy
inferred← citeshttps://doi.org/10.4028/p-b9gfqpopenalex-snapshot
A Study on Grain Refinement of Aluminum Alloys by Adding Grain Refiners and Severe Plastic Deformation: A Review
inferred← citeshttps://doi.org/10.4028/www.scientific.net/amr.139-141.718openalex-snapshot
Modification Microstructures in In Situ Mg2Si Reinforced Al-Si Alloy Composites
inferred← citeshttps://doi.org/10.4028/www.scientific.net/amr.702.159openalex-snapshot
Transformation of Pure Al Structure under the Influence of Electromagnetic Field
inferred← citeshttps://doi.org/10.4028/www.scientific.net/amr.746.478openalex-snapshot
The Influence of Electromagnetic Stirring on Primary Structure of Pure Al and Al-Si Alloy
inferred← citeshttps://doi.org/10.4028/www.scientific.net/amr.925.253openalex-snapshot
The Effect of Microalloying of Nickel, RRA Treatment on Microstructure and Mechanical Properties for High Strength Aluminum Alloy
inferred← citeshttps://doi.org/10.4028/www.scientific.net/kem.875.211openalex-snapshot
Influence of Mn and TiB2 on the Microstructural Evolution of the Primary α-Al Grains and Fe Containing Intermetallic in the Wrought Al-Mg-Si Alloy
inferred← citeshttps://doi.org/10.4028/www.scientific.net/msf.794-796.155openalex-snapshot
Grain Refinement Efficiency of a New Oxide-Containing Master Alloy for Aluminium Casting Alloys
inferred← citeshttps://doi.org/10.4028/www.scientific.net/msf.819.63openalex-snapshot
Effect of Aluminium and Silicon to IMC Formation in Low Ag-SAC Solder
inferred← citeshttps://doi.org/10.4028/www.scientific.net/msf.828-829.23openalex-snapshot
Development of New Oxide Based Master Alloys and their Grain Refinement Potency in Aluminium Alloys
inferred← citeshttps://doi.org/10.4028/www.scientific.net/msf.989.577openalex-snapshot
Structural Changes in the Aluminum - Magnesium System Alloy
inferred← citeshttps://doi.org/10.4108/eai.3-11-2018.2285718openalex-snapshot
The Effect of Cooling Slope on Mechanical Properties of Aluminum-8.5wt.% Si Alloy Produced by Gravity Casting
inferred← citeshttps://doi.org/10.4236/ojmetal.2014.43006openalex-snapshot
Investigation on Microstructure and Grain Refining Performance of a New Type of Al-3Ti-1C Master Alloy
inferred← citeshttps://doi.org/10.5772/intechopen.71450openalex-snapshot
Some Considerations on the Structure Refinement in Al-Based Alloys
inferred← citeshttps://doi.org/10.5829/idosi.ije.2013.26.07a.04openalex-snapshot
Microstructure and Grain Refining Performance of a New Al-Ti-C Master Alloy
inferred← citeshttps://doi.org/10.7454/jmef.v3i1.1053openalex-snapshot
Effects of Ti Addition on the Characteristics of Al-10Zn-6Mg-2Si/ZrO2 Composites Produced by Squeeze Casting
inferred← citeshttps://doi.org/10.9790/1684-11649098openalex-snapshot
Determination of Optimum Percentage Addition of Magnesium in 319 Aluminum Alloy
Editorial review for independent work. ICSAC — the Institute for Complexity
Science and Advanced Computing — runs a structured editorial panel for researchers
publishing outside journals, and publishes on CiteStamp rails. Submission is free
and goes through ORCID: icsacinstitute.org/submit.