On the public citation graph
Physical metallurgy of nickel aluminides
0 signed · 199 inferred · view as graph
Inferred edges come from two machine sources: sweeps of open repository metadata (mostly SSRN and Zenodo), and a bulk OpenAlex citation snapshot. Every row below is labelled with the one it came from. Neither is a complete citation index — absence here is not evidence of absence.
Is this your work? Sign in with ORCID and put your name on the
claims that are yours.
Reference health. See whether every reference in this work resolves to a
known work and none has been retracted — and get a dated CiteStamped
badge you can embed.
What this work says
Outgoing claims: the papers this work cites, builds on, or argues with.
inferredcites →https://doi.org/10.1002/pssa.2210440225openalex-snapshot
The elastic behaviour of β2-NiAl alloys
inferredcites →https://doi.org/10.1002/pssa.2210530132openalex-snapshot
Young's modulus of β2-NiAl alloys
inferredcites →https://doi.org/10.1002/pssa.2211140233openalex-snapshot
Magnetic and Electrical Properties of Nonequilibrium NiAl Alloys Produced by Vapor Quenching
inferredcites →https://doi.org/10.1002/pssb.19680290136openalex-snapshot
Deformation Modes of the Intermediate Phase NiAl
inferredcites →https://doi.org/10.1002/pssb.19700390117openalex-snapshot
Dislocations in Extruded β′‐NiAl
inferredcites →https://doi.org/10.1007/978-1-4613-1215-4openalex-snapshot
Physical Metallurgy and processing of Intermetallic Compounds
inferredcites →https://doi.org/10.1007/978-1-4613-1215-4_7openalex-snapshot
The Physical and Mechanical Metallurgy of NiAl
inferredcites →https://doi.org/10.1007/bf00551018openalex-snapshot
Flow and fracture behaviour of Ni3(Al�Ti) single crystals tested in tension
inferredcites →https://doi.org/10.1007/bf02399838openalex-snapshot
Point defects in NiAl near the equiatomic composition
inferredcites →https://doi.org/10.1007/bf02647332openalex-snapshot
Correlation of deformation mechanisms with the tensile and compressive behavior of NiAl and NiAl(Zr) intermetallic alloys
inferredcites →https://doi.org/10.1007/bf02659495openalex-snapshot
Precipitation hardening in nickel-copper base alloy monel K 500
inferredcites →https://doi.org/10.1007/bf02666334openalex-snapshot
The Role of Microstructure on Strength and Ductility of Hot-Extruded Mechanically Alloyed NiAl
inferredcites →https://doi.org/10.1007/bf03220163openalex-snapshot
NiAl alloys for high-temperature structural applications
inferredcites →https://doi.org/10.1007/s11663-997-0018-2openalex-snapshot
Micropyretic synthesis of tough NiAl alloys
inferredcites →https://doi.org/10.1007/s11663-999-0046-1openalex-snapshot
Micropyretic synthesis studies of Ni-, Al-, Ti-, and Nb-containing alloys
inferredcites →https://doi.org/10.1016/0001-6160(67)90067-3openalex-snapshot
Thermal vacancies in NiAl
inferredcites →https://doi.org/10.1016/0001-6160(73)90198-3openalex-snapshot
Temperature and orientation dependence of the yield stress in Ni{in3}Ga single crystals
inferredcites →https://doi.org/10.1016/0001-6160(76)90078-xopenalex-snapshot
Thermodynamics of intermetallic phases with the triple-defect B2 structure
inferredcites →https://doi.org/10.1016/0001-6160(85)90139-7openalex-snapshot
Effect of boron on grain-boundaries in Ni3Al†
inferredcites →https://doi.org/10.1016/0001-6160(85)90237-8openalex-snapshot
Electronic and structural studies of grain boundary strength and fracture in Ll2 ordered alloys—II. On the effect of third elements in Ni3Al alloy
inferredcites →https://doi.org/10.1016/0001-6160(87)90273-2openalex-snapshot
The order-disorder transformation in Ni3Al and Ni3AlFe alloys—I. Determination of the transition temperatures and their relation to ductility
inferredcites →https://doi.org/10.1016/0009-2509(92)87034-nopenalex-snapshot
Combustion synthesis of advanced materials
inferredcites →https://doi.org/10.1016/0022-3697(69)90384-9openalex-snapshot
Electrical properties of β-phase NiAl
inferredcites →https://doi.org/10.1016/0036-9748(84)90394-6openalex-snapshot
Amorphous transition in intermetallic compounds induced by electron irradiation
inferredcites →https://doi.org/10.1016/0079-6425(94)00011-5openalex-snapshot
Combustion synthesis of advanced materials: Part I. Reaction parameters
inferredcites →https://doi.org/10.1016/0956-7151(91)90027-xopenalex-snapshot
Slip systems in 〈001〉 oriented NiAl single crystals
inferredcites →https://doi.org/10.1016/0956-7151(91)90028-yopenalex-snapshot
The effect of alloying on slip systems in 〈001〉 oriented NiAl single crystals
inferredcites →https://doi.org/10.1016/0956-7151(94)90366-2openalex-snapshot
An atom probe study of grain boundary and matrix chemistry in microalloyed NiAl
inferredcites →https://doi.org/10.1016/0956-7151(94)90394-8openalex-snapshot
Laser surface alloying of nickel by molybdenum and aluminium— microstructural studies
inferredcites →https://doi.org/10.1016/0956-7151(94)90459-6openalex-snapshot
Mechanisms of cyclic deformation of NiAl single crystals at high temperatures
inferredcites →https://doi.org/10.1016/0956-716x(91)90036-zopenalex-snapshot
A simplified method for determining the number of independent slip systems in crystals
inferredcites →https://doi.org/10.1016/0956-716x(91)90312-oopenalex-snapshot
Constitution of pseudobinary hypoeutectic β-NiAl + α-V alloys
inferredcites →https://doi.org/10.1016/0956-716x(92)90221-yopenalex-snapshot
The effect of iron, gallium and molybdenum on the room temperature tensile ductility of NiAl
inferredcites →https://doi.org/10.1016/0956-716x(92)90313-4openalex-snapshot
Environmental embrittlement and grain-boundary fracture in Ni3Al
inferredcites →https://doi.org/10.1016/0956-716x(92)90363-jopenalex-snapshot
The occurrence of 〈110〉 slip in NiAl
inferredcites →https://doi.org/10.1016/0956-716x(93)90122-9openalex-snapshot
Observation of a metastable B2 phase in rapidly solidified ribbons of NbAl alloys
inferredcites →https://doi.org/10.1016/1359-6462(96)00070-xopenalex-snapshot
High tensile elongation of β-NiAl single crystals at 293 K
inferredcites →https://doi.org/10.1016/s0036-9748(74)80002-5openalex-snapshot
The origin of dislocations with b = <110> in single crystals of β-nial compressed along <001> at elevated temperatures
inferredcites →https://doi.org/10.1039/tf9585400814openalex-snapshot
The heats of formation in the system aluminium + nickel + titanium
inferredcites →https://doi.org/10.1063/1.1659674openalex-snapshot
X-Ray Diffraction Investigation of β′-NiAl Alloys
inferredcites →https://doi.org/10.1080/01418618408244214openalex-snapshot
The annealing of vacancy defects in β-NiAl I. Vacancy loop growth in as-grown single crystals annealed in ultra-high vacuum
inferredcites →https://doi.org/10.1080/01418618408244222openalex-snapshot
Weak-beam study of dislocations moving on {100} planes at 800°C in Ni3Al
inferredcites →https://doi.org/10.1080/01418619208201475openalex-snapshot
Weak-beam study of <111> superlattice dislocations in nial
inferredcites →https://doi.org/10.1080/14786436908228539openalex-snapshot
Unusual lattice defects in non-stoichiometric NiAl
inferredcites →https://doi.org/10.1080/14786437108217004openalex-snapshot
Slip systems in NiAl single crystals at 300°K and 77°K
inferredcites →https://doi.org/10.1080/14786437308221008openalex-snapshot
Oxidation-induced defects in NiAl
inferredcites →https://doi.org/10.1103/physrevb.43.6446openalex-snapshot
Effect of antiphase boundaries on the electronic structure and bonding character of intermetallic systems: NiAl
inferredcites →https://doi.org/10.1107/s0021889870005605openalex-snapshot
Determination of the order in the intermetallic phase Ni3Al as a function of temperature
inferredcites →https://doi.org/10.1107/s0021889872009203openalex-snapshot
Further studies on the nickel–aluminium system. I. β-NiAl and δ-Ni2Al3phase fields
inferredcites →https://doi.org/10.1107/s010876738408689xopenalex-snapshot
Handbook of Crystallographic Data for Intermetallic Phases
inferredcites →https://doi.org/10.1179/095066093790326276openalex-snapshot
Physical and mechanical properties of the B2 compound NiAl
inferredcites →https://doi.org/10.1179/imtr.1984.29.1.136openalex-snapshot
Mechanical properties of Ni 3 AI and nickel-base alloys with high volume fraction of γ'
inferredcites →https://doi.org/10.1557/jmr.1990.0754openalex-snapshot
Brittle fracture and grain boundary chemistry of microalloyed NiAl
inferredcites →https://doi.org/10.1557/jmr.2000.0014openalex-snapshot
Micropyretic synthesis of NiAl containing Ti and B
inferredcites →https://doi.org/10.1557/proc-133-639openalex-snapshot
Processing and Microstructure of Melt Spun Niai Alloys
inferredcites →https://doi.org/10.1557/proc-213-223openalex-snapshot
Comparison of TEM Observations with Dislocation Core Structure Calcuiations in B2 Ordered Compounds
inferredcites →https://doi.org/10.1557/proc-213-603openalex-snapshot
The Effect of Strain Rate on the Mechanical Properties of Single Crystal NiAl
inferredcites →https://doi.org/10.1557/proc-213-667openalex-snapshot
First-Principles Investigation of Mechanical Behavior of B2 Type Aluminides: Feal and Nial
inferredcites →https://doi.org/10.21236/ada191697openalex-snapshot
Rapidly Solidified Lightweight Durable Disk Material.
inferredcites →https://doi.org/10.31399/asm.hb.v03.a0006247openalex-snapshot
Binary Alloy Phase Diagrams
inferredcites →https://doi.org/10.31399/asm.tb.mnm2.t53060013openalex-snapshot
Structure of Metals and Alloys
What points at this work
Incoming claims: where this work appears in other papers’ reference lists and arguments.
inferred← citeshttps://doi.org/10.2139/ssrn.4800318openalex-extracted
Dilatometric and Thermal Behavior of a New Self-Lubricating Anti-Friction Composite Based on Ep975 Nickel Alloy Powder with Caf2 Solid Lubricant
inferred← citeshttps://doi.org/10.1002/9781118991978.hces045openalex-snapshot
Advanced Heat Exchangers for Clean and Sustainable Technology
inferred← citeshttps://doi.org/10.1002/adem.201500548openalex-snapshot
Ultra‐Fast One‐Step Fabrication of Cu2Se Thermoelectric Legs With Ni–Al Electrodes by Plasma‐Activated Reactive Sintering Technique
inferred← citeshttps://doi.org/10.1002/adem.202201800openalex-snapshot
Emerging Functional Metals in Additive Manufacturing
inferred← citeshttps://doi.org/10.1002/chin.200335197openalex-snapshot
Physical Metallurgy of Nickel Aluminides
inferred← citeshttps://doi.org/10.1007/978-3-030-53195-9_13openalex-snapshot
Laser Cladding of MCrAlY Alloys
inferred← citeshttps://doi.org/10.1007/978-94-007-6479-8_50openalex-snapshot
Realistic models of stochastically varying hyperfine interactions caused by vacancy diffusion in L12-structured compounds
inferred← citeshttps://doi.org/10.1007/s00170-019-03984-9openalex-snapshot
NiAl intermetallic composites—a review of processing methods, reinforcements and mechanical properties
inferred← citeshttps://doi.org/10.1007/s00170-019-04095-1openalex-snapshot
Carbon nanotube-reinforced intermetallic matrix composites: processing challenges, consolidation, and mechanical properties
inferred← citeshttps://doi.org/10.1007/s10751-012-0695-3openalex-snapshot
Realistic models of stochastically varying hyperfine interactions caused by vacancy diffusion in L12-structured compounds
inferred← citeshttps://doi.org/10.1007/s11085-005-8531-7openalex-snapshot
Cyclic Oxidation Behavior of Electrodeposited Ni3Al–CeO2Base Coatings at 850°C
inferred← citeshttps://doi.org/10.1007/s11106-016-9749-4openalex-snapshot
Structure and Properties of Ni3Al Intermetallic Under Vacuum Impact Sintering
inferred← citeshttps://doi.org/10.1007/s11182-021-02209-5openalex-snapshot
The Influence of TiC Particles on the Structure and Mechanical Properties of Ni3Al Manufactured By Spark Plasma Sintering
inferred← citeshttps://doi.org/10.1007/s11182-024-03224-yopenalex-snapshot
Microstructure and Phase Composition of Ni–Cr–Al-Based Intermetallics Obtained by a Dual-Wire Electron Beam Additive Manufacturing
inferred← citeshttps://doi.org/10.1007/s11665-016-2120-6openalex-snapshot
Characterization and Wear Behavior of Heat-treated Ni3Al Coatings Deposited by Air Plasma Spraying
inferred← citeshttps://doi.org/10.1007/s11665-017-2594-xopenalex-snapshot
Dynamic Recrystallization Behavior and Texture Evolution of NiAl Intermetallic During Hot Deformation
inferred← citeshttps://doi.org/10.1007/s11771-023-5438-xopenalex-snapshot
Non-isothermal aging behavior of a friction-surfaced Al-Cu-Mg alloy matrix composite coating reinforced by nickel-aluminide
inferred← citeshttps://doi.org/10.1007/s12540-020-00754-1openalex-snapshot
Adjustment of Hardness of (CrFeMn)x(NiyAl)1−x, (y = 1,3 and x = 0.6,0.72,0.80) High Entropy Alloys by Deliberate Control of Intermetallic Phase Formation: Microstructural Evolution, Hardness and Dry-Sliding Wear Response
inferred← citeshttps://doi.org/10.1007/s12666-016-0848-1openalex-snapshot
Characterization of Nickel Aluminide Formed on Ni-Based Superalloy 690 Substrate, First-Principle Ni(Cr)/NiAl Interface Simulations and Stability of Aluminide in Aggressive Environment in Pre-oxidized State
inferred← citeshttps://doi.org/10.1007/s42247-024-00837-4openalex-snapshot
Characterizations of the B2-Ni-Al(B) ordered alloy produced by high-energy mechanical alloying process: microstructure and thermal behaviors
inferred← citeshttps://doi.org/10.1007/s43452-022-00383-yopenalex-snapshot
Effect of friction surfacing parameters on the microstructural, mechanical properties, and wear characteristic of Al-Cu-Mg alloy coating reinforced by nickel aluminide
inferred← citeshttps://doi.org/10.1016/j.actamat.2015.04.053openalex-snapshot
Characterization and understanding of residual stresses in a NiCoCrAlY bond coat for thermal barrier coating application
inferred← citeshttps://doi.org/10.1016/j.actamat.2023.118986openalex-snapshot
Strong impact of spin fluctuations on the antiphase boundaries of weak itinerant ferromagnetic Ni 3 Al
inferred← citeshttps://doi.org/10.1016/j.addma.2019.100999openalex-snapshot
Influence of aging and HIP treatment on the structure and properties of NiAl-based turbine blades manufactured by laser powder bed fusion
inferred← citeshttps://doi.org/10.1016/j.aej.2025.01.099openalex-snapshot
New anti-friction self-lubricating composite based on EP975 nickel alloy powder with CaF2 solid lubricant – Thermal and dilatometric behavior
inferred← citeshttps://doi.org/10.1016/j.apsusc.2019.144861openalex-snapshot
First-principles computational study of Ni/α-Al2O3 hybrid interface reactions under extreme thermodynamic conditions
inferred← citeshttps://doi.org/10.1016/j.apt.2021.07.028openalex-snapshot
Influence of ball milling duration on the morphology, features of the structural-phase state and microhardness of 3Ni-Al powder mixture
inferred← citeshttps://doi.org/10.1016/j.ceramint.2018.09.113openalex-snapshot
Preparation of Ni3Al bonded diamond core drill with Ni–Cr alloy and its performance on glass–ceramic
inferred← citeshttps://doi.org/10.1016/j.combustflame.2021.111468openalex-snapshot
Pore-scale study of complex flame stabilization phenomena in thin-layered radial porous burner
inferred← citeshttps://doi.org/10.1016/j.compositesb.2021.109457openalex-snapshot
Excellent strength-ductility synergy of NiAl-based composites achieved by a 3-dimensional network structure
inferred← citeshttps://doi.org/10.1016/j.corsci.2007.05.002openalex-snapshot
Cyclic oxidation behaviour of electrodeposited Ni3Al–CeO2 base coatings at 1050°C
inferred← citeshttps://doi.org/10.1016/j.corsci.2017.09.004openalex-snapshot
Hot corrosion behavior and near-surface microstructure of a “low-temperature high-activity Cr-aluminide” coating on inconel 738LC exposed to Na2SO4, Na2SO4+ V2O5 and Na2SO4+ V2O5+ NaCl at 900 °C
inferred← citeshttps://doi.org/10.1016/j.cossms.2024.101200openalex-snapshot
Grain refinement and morphological control of intermetallic compounds: A comprehensive review
inferred← citeshttps://doi.org/10.1016/j.csite.2022.102372openalex-snapshot
Performance characteristics of a thin‐layered radial porous burner with different strategies for fuel‐air mixture supply
inferred← citeshttps://doi.org/10.1016/j.enconman.2014.06.096openalex-snapshot
Forward and inverse solutions of a conductive, convective and radiative cylindrical porous fin
inferred← citeshttps://doi.org/10.1016/j.expthermflusci.2013.02.018openalex-snapshot
Effects of bulk stoichiometry and surface state of NiAl nano-dispersoid on the stability and heat transfer characteristics of water based nanofluid
inferred← citeshttps://doi.org/10.1016/j.ijheatmasstransfer.2016.03.048openalex-snapshot
Temperature and radiative characteristics of cylindrical porous Ni–Al burners
inferred← citeshttps://doi.org/10.1016/j.ijplas.2015.02.006openalex-snapshot
Creep behavior as dislocation climb over NiAl nanoprecipitates in ferritic alloy: The effects of interface stresses and temperature
inferred← citeshttps://doi.org/10.1016/j.ijrmhm.2017.09.013openalex-snapshot
ZrB 2 based novel composite with NiAl as reinforcement phase
inferred← citeshttps://doi.org/10.1016/j.ijrmhm.2026.108067openalex-snapshot
Investigations on the microstructure and mechanical properties of NiAl-WC-Fe composites prepared by hot-pressing sintering
inferred← citeshttps://doi.org/10.1016/j.intermet.2009.01.012openalex-snapshot
Ductility and magnetism: An ab-initio study of NiAl–Fe and NiAl–Mn alloys
inferred← citeshttps://doi.org/10.1016/j.intermet.2021.107344openalex-snapshot
Hot deformation behavior and microstructure evolution of NiAl-9HfO2 composite
inferred← citeshttps://doi.org/10.1016/j.intermet.2021.107440openalex-snapshot
Effect of friction surfacing on the microstructural and wear characteristics of Al-Cu-Mg alloy coating reinforced by nickel aluminide
inferred← citeshttps://doi.org/10.1016/j.intermet.2023.108105openalex-snapshot
Thermal stability of Ni3Al microstructure and microhardness after spark plasma sintering
inferred← citeshttps://doi.org/10.1016/j.intermet.2026.109298openalex-snapshot
Sintered NiAl/Ni3Al/TiB2 composite produced under high pressure and high temperature (HP-HT) conditions
inferred← citeshttps://doi.org/10.1016/j.jallcom.2010.08.056openalex-snapshot
Characterization of NiAl with cobalt produced by combustion synthesis
inferred← citeshttps://doi.org/10.1016/j.jallcom.2014.09.012openalex-snapshot
Effect of B and Cr on elastic strength and crystal structure of Ni3Al alloys under high pressure
inferred← citeshttps://doi.org/10.1016/j.jallcom.2014.10.132openalex-snapshot
Site preference of Hf dopant in Ni3Al alloys: A perturbed angular correlation study
inferred← citeshttps://doi.org/10.1016/j.jallcom.2015.10.092openalex-snapshot
Yield strength of Ni–Al–Cr superalloy under pressure
inferred← citeshttps://doi.org/10.1016/j.jallcom.2015.11.105openalex-snapshot
Phase evolution during the reactive sintering of ternary Al–Ni–Ti powder compacts
inferred← citeshttps://doi.org/10.1016/j.jallcom.2019.152133openalex-snapshot
Factors affecting the structure, phase transition and crystallization process of AlNi nanoparticles
inferred← citeshttps://doi.org/10.1016/j.jallcom.2021.162247openalex-snapshot
Effect of molybdenum on structural evolution and thermomechanical behavior of a heat-resistant nickel aluminide-based alloy
inferred← citeshttps://doi.org/10.1016/j.jallcom.2022.164211openalex-snapshot
Effects of pre- and post-friction surfacing heat treatment on microstructure and corrosion behavior of nickel-aluminide reinforced Al-Cu-Mg alloy
inferred← citeshttps://doi.org/10.1016/j.jallcom.2023.169152openalex-snapshot
Wire arc additive manufacturing of Ni-Al intermetallic compounds through synchronous wire-powder feeding
inferred← citeshttps://doi.org/10.1016/j.jallcom.2026.191124openalex-snapshot
Microstructure and mechanical properties of NiAl-based multicomponent intermetallic compounds
inferred← citeshttps://doi.org/10.1016/j.jmrt.2026.07.264openalex-snapshot
Mechanical and melting behaviour of Ni3Al intermetallic under uniaxial loading: A molecular dynamics study
inferred← citeshttps://doi.org/10.1016/j.matchar.2022.112280openalex-snapshot
Precipitation of homogeneous nanoscale HfRe2 in NiAl by strain-induced precipitation
inferred← citeshttps://doi.org/10.1016/j.matchar.2025.115610openalex-snapshot
In-situ grown graphene enhanced oxidation resistance of NiAl
inferred← citeshttps://doi.org/10.1016/j.matchemphys.2017.02.033openalex-snapshot
Effect of low and high heating rates on reaction path of Ni(V)/Al multilayer
inferred← citeshttps://doi.org/10.1016/j.matdes.2015.05.027openalex-snapshot
Effect of Al/Ni ratio, heat treatment on phase transformations and microstructure of Al FeCoCrNi2− (x= 0.3, 1) high entropy alloys
inferred← citeshttps://doi.org/10.1016/j.matlet.2014.06.067openalex-snapshot
Fracture toughness and fracture micromechanism in a cast AlCoCrCuFeNi high entropy alloy system
inferred← citeshttps://doi.org/10.1016/j.matlet.2014.09.128openalex-snapshot
Nanoparticles in zirconium-doped aluminide coatings
inferred← citeshttps://doi.org/10.1016/j.matlet.2015.01.089openalex-snapshot
Nanoparticles in hafnium-doped aluminide coatings
inferred← citeshttps://doi.org/10.1016/j.msea.2007.09.003openalex-snapshot
Characterization and comparison between APS coatings prepared from ball milled and plasma processed nickel–aluminium powders
inferred← citeshttps://doi.org/10.1016/j.msea.2007.11.019openalex-snapshot
Microstructural investigation of phase transformations and properties during thermal processing of a 6w/oAl-modified Ni–Cr–Fe ternary alloy
inferred← citeshttps://doi.org/10.1016/j.msea.2010.10.044openalex-snapshot
Microstructural and thermal processing effects on adding 1 and 3 w/o Ti to a powder metallurgy processed quaternary Ni–Cr–Fe–Al alloy
inferred← citeshttps://doi.org/10.1016/j.msea.2013.12.019openalex-snapshot
Effect of heat treatment on tensile deformation characteristics and properties of Al3003/STS439 clad composite
inferred← citeshttps://doi.org/10.1016/j.msea.2016.09.075openalex-snapshot
Structure and properties of NiAl-Cr(Co,Hf) alloys prepared by centrifugal SHS casting. Part 1 – Room temperature investigations
inferred← citeshttps://doi.org/10.1016/j.msea.2017.02.089openalex-snapshot
Structure and properties of NiAl-Cr(Co,Hf) alloys prepared by centrifugal SHS casting followed by vacuum induction remelting. Part 2–Evolution of the structure and mechanical behavior at high temperature
inferred← citeshttps://doi.org/10.1016/j.msea.2018.08.032openalex-snapshot
Influence of rhenium addition on microstructure, mechanical properties and oxidation resistance of NiAl obtained by powder metallurgy
inferred← citeshttps://doi.org/10.1016/j.msea.2020.139670openalex-snapshot
Enhancement of fracture toughness of hot-pressed NiAl-Re material by aluminum oxide addition
inferred← citeshttps://doi.org/10.1016/j.msea.2020.140070openalex-snapshot
Reactive synthesis of CNTs reinforced nickel aluminide composites by spark plasma sintering
inferred← citeshttps://doi.org/10.1016/j.msea.2020.140162openalex-snapshot
Preparation and properties of Nano-HfO2 reinforced NiAl intermetallics fabricated with powder metallurgy
inferred← citeshttps://doi.org/10.1016/j.msea.2023.144686openalex-snapshot
Enhanced Mechanical Properties of a Ni-W-Al Alloy in the As-Cast State
inferred← citeshttps://doi.org/10.1016/j.msea.2024.146783openalex-snapshot
Effect of synergistic microalloying on the microstructural optimization of Mo/NiAl alloy with excellent mechanical properties under rapid non-equilibrium solidification
inferred← citeshttps://doi.org/10.1016/j.paerosci.2015.09.003openalex-snapshot
Advances in processing of NiAl intermetallic alloys and composites for high temperature aerospace applications
inferred← citeshttps://doi.org/10.1016/j.prostr.2020.01.103openalex-snapshot
The Role of Substructural Features on the Deformation and Fracture Behavior of BCC and FCC High Entropy Alloys
inferred← citeshttps://doi.org/10.1016/j.scriptamat.2023.115934openalex-snapshot
Accurate complex-stacking-fault Gibbs energy in Ni3Al at high temperatures
inferred← citeshttps://doi.org/10.1016/j.seta.2020.100974openalex-snapshot
Assessment of a cylindrical porous radiant burner with internal combustion regime for sustainable energy: Numerical analysis of the radiant efficiency and NO production
inferred← citeshttps://doi.org/10.1016/j.spmi.2009.01.001openalex-snapshot
Modeling of lattice parameters of the and phases of the superalloys with base nickel by using a multiple linear regression analysis
inferred← citeshttps://doi.org/10.1016/j.surfcoat.2014.12.011openalex-snapshot
On the search for producing intermetallics by diffusion reaction of cold spray bulk deposits
inferred← citeshttps://doi.org/10.1016/j.surfcoat.2018.01.073openalex-snapshot
Mechanical and microstructural characterization of MCrAlY coatings produced by laser cladding: The influence of the Ni, Co and Al content
inferred← citeshttps://doi.org/10.1016/j.surfcoat.2022.128295openalex-snapshot
Wear and oxidation performances of low temperature aluminized IN600
inferred← citeshttps://doi.org/10.1016/j.surfin.2022.102030openalex-snapshot
Alternative Cu3Zn catalysts for enhanced reduction of CO2 to CH4: A density functional theory-based approach
inferred← citeshttps://doi.org/10.1016/j.surfrep.2019.06.001openalex-snapshot
Physical and chemical phenomena occurring between solid ceramics and liquid metals and alloys at laser and plasma composite coatings formation: A review
inferred← citeshttps://doi.org/10.1016/j.tafmec.2021.102948openalex-snapshot
Underlying mechanisms for deformation and fracture behaviour of some BCC and FCC high entropy alloys
inferred← citeshttps://doi.org/10.1016/j.triboint.2018.04.013openalex-snapshot
Investigating the application of a honeycomb abradable lining in the turbine stage of an aero-engine
inferred← citeshttps://doi.org/10.1016/j.vacuum.2019.109066openalex-snapshot
Characterization of TiC and TiB2 reinforced Nickel Aluminide (NiAl) based metal matrix composites cast by in situ vacuum suction arc melting
inferred← citeshttps://doi.org/10.1016/j.wear.2014.06.025openalex-snapshot
The sliding wear of TiC and Ti(C,N) cermets prepared with a stoichiometric Ni3Al binder
inferred← citeshttps://doi.org/10.1016/s1003-6326(22)65960-0openalex-snapshot
Influence of rotational speed in friction surfacing of nickel-aluminide reinforced aluminum matrix composite on commercially pure aluminum
inferred← citeshttps://doi.org/10.1063/12.0000903openalex-snapshot
Examination of shock-induced reaction in Ni/Al powder mixtures
inferred← citeshttps://doi.org/10.1063/5.0037012openalex-snapshot
Deformation of binary and boron-doped Ni3Al alloys at high pressures studied with synchrotron x-ray diffraction
inferred← citeshttps://doi.org/10.1080/02670836.2022.2062648openalex-snapshot
Nickel Aluminide intermetallic composites fabricated by various processing routes – a review
inferred← citeshttps://doi.org/10.1088/1402-4896/acd81copenalex-snapshot
A review of mechanical and tribological properties of Ni 3 Al-based coatings-synthesis and high-temperature behavior
inferred← citeshttps://doi.org/10.1088/1757-899x/432/1/012009openalex-snapshot
Development of Fe-20Cr-5Al-1Y2O3 ODS alloy with addition of Ni by means of Arc plasma sintering (APS) method
inferred← citeshttps://doi.org/10.1088/1757-899x/655/1/012032openalex-snapshot
Influence of spark plasma sintering temperature on the densification and micro-hardness behaviour of Ni-Cr-Al alloy
inferred← citeshttps://doi.org/10.1103/physrevb.73.104114openalex-snapshot
Ab initiostudy of the mechanical properties of NiAl microalloyed by X=Cr,Mo,Ti,Ga
inferred← citeshttps://doi.org/10.1134/s0031918x20130062openalex-snapshot
Production of NiAl–(Cr,Mo) Eutectic Alloys and Their Cyclic Oxidation Behavior at 800–1000°C
inferred← citeshttps://doi.org/10.1134/s1027451025701046openalex-snapshot
Deformation, Fracture, and Structure of a Single-Crystal Intermetallic Compound in Multilevel Model of Plastic Deformation
inferred← citeshttps://doi.org/10.1142/s0217984921501244openalex-snapshot
First-principle-based structural and thermodynamic parameters of Ni–Al intermetallic compounds under different pressures and temperatures
inferred← citeshttps://doi.org/10.1186/s13321-016-0143-5openalex-snapshot
Are the physicochemical properties of antibacterial compounds really different from other drugs?
inferred← citeshttps://doi.org/10.1515/amm-2016-0044openalex-snapshot
Determination of γ′+γ / γ Phase Boundary in Ni-Al-Cr System Using DTA Thermal Analysis
inferred← citeshttps://doi.org/10.1515/amm-2017-0234openalex-snapshot
Characteristics of the Nial/Ni3al Matrix Composite With Tib2 Particles Fabricated By High Pressure – High Temperature Sintering
inferred← citeshttps://doi.org/10.1557/jmr.2005.0312openalex-snapshot
Estimation of Interdiffusivities of the Pseudo NiAl Binary Phase Formed in a Nickel-based Superalloy by Pack Cementation
inferred← citeshttps://doi.org/10.1557/jmr.2016.315openalex-snapshot
The hot deformation behavior and processing map of powder metallurgy NiAl-based alloy
inferred← citeshttps://doi.org/10.1557/s43580-023-00716-wopenalex-snapshot
Synthesis and microstructure characterization of nanocrystalline NiAl compound with copper addition by mechanical alloying
inferred← citeshttps://doi.org/10.1595/205651326x17510235734462openalex-snapshot
Structure-Property Correlation in Intermetallic Compounds of Aluminium with Ruthenium, Iridium and Nickel
inferred← citeshttps://doi.org/10.17073/0021-3438-2023-4-24-34openalex-snapshot
Features of formation of the Al–Ni–Zr system alloy structure obtained by reducing oxide compounds by aluminothermy using SHS metallurgy
inferred← citeshttps://doi.org/10.17073/0368-0797-2023-2-184-190openalex-snapshot
Influence of laser spot size on structure and properties of high-temperature CompoNIAL-M5-3 alloy produced by selective laser melting
inferred← citeshttps://doi.org/10.20334/2338-mopenalex-snapshot
Daugiafunkcių nikelio-aliuminio dangų ant aliuminio-magnio lydinių tyrimai
inferred← citeshttps://doi.org/10.2139/ssrn.3990818openalex-snapshot
Combustion Synthesis and Magnetic Properties of Ni-Al-Mn Based Alloy
inferred← citeshttps://doi.org/10.2139/ssrn.6664257openalex-snapshot
Mechanical and Melting Behaviour of Ni3Al Intermetallic under Uniaxial Loading: A Molecular Dynamics Study
inferred← citeshttps://doi.org/10.2339/politeknik.557592openalex-snapshot
The Effect of Process Parameters on Microstructure and Porosity of Layered NiAl(Co/Cr) Alloy Produced by SHS Method
inferred← citeshttps://doi.org/10.2478/awutp-2024-0003openalex-snapshot
Effect of SB Addition on Mechanical, Electronic and Thermodynamic Properties of Intermetallic B2-Nial: First Principles Study
inferred← citeshttps://doi.org/10.3103/s106138621504007xopenalex-snapshot
Synthesis and heat treatment of sprayed high-temperature NiAl–Ni3Al coatings by in-flight combustion synthesis (CAFSY)
inferred← citeshttps://doi.org/10.33484/sinopfbd.1471890openalex-snapshot
Al-Ni İntermetalik Bileşiklerinin Gama Radyasyonu Zırhlama Parametrelerinin Hesaplanması
inferred← citeshttps://doi.org/10.3389/fmats.2016.00034openalex-snapshot
Advanced Image Analysis of the Surface Pattern Emerging in Ni3Al Intermetallic Alloys on Anodization
inferred← citeshttps://doi.org/10.3390/coatings16030307openalex-snapshot
Parametric Study of Heating Temperature Non-Uniformity at Porous Burner Outlet: Impacts of Volumetric Flow Rate, Equivalence Ratio, Surface Emissivity, and Thermal Conductivity
inferred← citeshttps://doi.org/10.3390/coatings4020231openalex-snapshot
Ni-Al and NiO-Al Composite Coatings by Combustion-Assisted Flame Spraying
inferred← citeshttps://doi.org/10.3390/cryst13030435openalex-snapshot
An Overview on Synthesis, Processing and Applications of Nickel Aluminides: From Fundamentals to Current Prospects
inferred← citeshttps://doi.org/10.3390/cryst16010071openalex-snapshot
Effect of Titanium Content and Mechanical Alloying Time on the Formation of Nanocrystalline Solid Solutions in the Ni–Al–Ti System
inferred← citeshttps://doi.org/10.3390/ma15124184openalex-snapshot
Deposition of Aluminide Coatings onto AISI 304L Steel for High Temperature Applications
inferred← citeshttps://doi.org/10.3390/ma15155453openalex-snapshot
Aluminide Diffusion Coatings on IN 718 by Pack Cementation
inferred← citeshttps://doi.org/10.3390/ma18215044openalex-snapshot
Feasibility of Employing Semi-Hard Magnetic Materials for Hysteresis Magnetic Clutches in Railway Systems
inferred← citeshttps://doi.org/10.3390/ma4061104openalex-snapshot
The Role Played by Computation in Understanding Hard Materials
inferred← citeshttps://doi.org/10.3390/s19194340openalex-snapshot
Design and Fabrication of CMOS Microstructures to Locally Synthesize Carbon Nanotubes for Gas Sensing
inferred← citeshttps://doi.org/10.4028/www.scientific.net/amr.23.283openalex-snapshot
Obtaining of Ni Base Intermetallic Alloys by Solidification Control
inferred← citeshttps://doi.org/10.4028/www.scientific.net/amr.23.67openalex-snapshot
Some Aspects Regarding the Complex Alloying of the Ni3Al Intermetallic Compound with Substitutional and Interstitial Elements
inferred← citeshttps://doi.org/10.4028/www.scientific.net/df.13.98openalex-snapshot
Diffusion in B2 NiAl and FeAl Intermetallics and Their Alloys
inferred← citeshttps://doi.org/10.4028/www.scientific.net/kem.821.440openalex-snapshot
Effect of Heating Rate on the Microstructure and Mechanical Properties of Spark Plasma Sintered CNTs Reinforced Nickel Aluminide
inferred← citeshttps://doi.org/10.55546/jmm.1460140openalex-snapshot
Effect of Cold Compaction Pressure on Porous NiAl Articles Produced by Using Space Holder Urea via VCS
inferred← citeshttps://doi.org/10.70675/7c872595z2338z41e5za112z5fba315fe791openalex-snapshot
Development of Al0.3CoCrFeNi high entropy alloy by Spark Plasma Sintering and Laser Powder Bed Fusion
inferred← citeshttps://doi.org/10.70675/fd3a26d9zec57z4816z81e1z12e38932f932openalex-snapshot
Synthesis and high-temperature behavior of self-restoring coatings
Editorial review for independent work. ICSAC — the Institute for Complexity
Science and Advanced Computing — runs a structured editorial panel for researchers
publishing outside journals, and publishes on CiteStamp rails. Submission is free
and goes through ORCID: icsacinstitute.org/submit.