On the public citation graph
The use of cast Ti−48Al−2Cr−2Nb in jet engines
0 signed · 137 inferred · view as graph
Inferred edges come from two machine sources: sweeps of open repository metadata (mostly SSRN and Zenodo), and a bulk OpenAlex citation snapshot. Every row below is labelled with the one it came from. Neither is a complete citation index — absence here is not evidence of absence.
Is this your work? Sign in with ORCID and put your name on the
claims that are yours.
Reference health. See whether every reference in this work resolves to a
known work and none has been retracted — and get a dated CiteStamped
badge you can embed.
What this work says
Outgoing claims: the papers this work cites, builds on, or argues with.
inferredcites →https://doi.org/10.1016/0142-1123(95)00063-1openalex-snapshot
Microstructure dependence of fatigue strength and fatigue crack propagation in titanium aluminide
What points at this work
Incoming claims: where this work appears in other papers’ reference lists and arguments.
inferred← citeshttps://doi.org/10.2139/ssrn.4844830openalex-extracted
Fatigue Properties of Twin-Wire Directed Energy Deposition-Arc Fabricated Ti-48al-2cr-2nb Alloy
inferred← citeshttps://doi.org/10.1002/9781118062173.ch57openalex-snapshot
Microstructural Properties of Gamma Titanium Aluminide Manufactured by Electron Beam Melting
inferred← citeshttps://doi.org/10.1002/9781118792148.ch60openalex-snapshot
Titanium Aluminum Alloy Fabricated by Pressure Infiltration and Heat Treatment
inferred← citeshttps://doi.org/10.1002/9781119296126.ch223openalex-snapshot
Microstructure and Mechanical Properties of Ti‐48Al‐2Cr‐2Nb Manufactured Via Electron Beam Melting
inferred← citeshttps://doi.org/10.1002/9781119296126.ch42openalex-snapshot
An EBSD Investigation of Ti‐6Al‐4Nb and Ti‐10Al‐4Nb Alloys Processed by Plane Strain Compression Test
inferred← citeshttps://doi.org/10.1002/adem.200500200openalex-snapshot
Machining Sequence to Manufacture a γ‐TiAl‐Conrod for Application in Combustion Engines
inferred← citeshttps://doi.org/10.1002/adem.202100722openalex-snapshot
Sputtering and Characterization of MAX‐Phase Forming Cr–Al–C and Ti–Al–C Coatings and Their Application on γ‐Based Titanium Aluminides
inferred← citeshttps://doi.org/10.1002/adem.202101199openalex-snapshot
On the Formation Mechanism of Banded Microstructures in Electron Beam Melted Ti–48Al–2Cr–2Nb and the Design of Heat Treatments as Remedial Action
inferred← citeshttps://doi.org/10.1007/978-3-030-65261-6_18openalex-snapshot
Tailoring Microstructure of Selective Laser Melted TiAl-Alloy with In-Situ Heat Treatment via Multiple Laser Exposure
inferred← citeshttps://doi.org/10.1007/978-3-030-89784-0_16openalex-snapshot
Thermophysical Properties of Titanium Alloys
inferred← citeshttps://doi.org/10.1007/978-3-319-48764-9_60openalex-snapshot
Titanium Aluminum Alloy Fabricated by Pressure Infiltration and Heat Treatment
inferred← citeshttps://doi.org/10.1007/978-94-011-4062-1_6openalex-snapshot
Synthesis and Characterization of Nanocrystalline Tial Based Alloys
inferred← citeshttps://doi.org/10.1007/bf03028135openalex-snapshot
Role of chlorine in the oxidation resistance of Ti-45at.% Al-1.6at.%Mn intermetallic compound
inferred← citeshttps://doi.org/10.1007/s10853-016-0358-xopenalex-snapshot
Densification behaviour and microstructural evolution of Ti-48Al consolidated by spark plasma sintering
inferred← citeshttps://doi.org/10.1007/s11085-018-9862-5openalex-snapshot
Evolution of Surface Morphology of Oxide Formed During Initial-Stage Oxidation of γ-TiAl Alloy Using In Situ Environmental SEM
inferred← citeshttps://doi.org/10.1007/s11595-006-3408-4openalex-snapshot
Fabrication of dense ultrafine TiAl alloys by spark plasma synthesis from mechanically activiated powders
inferred← citeshttps://doi.org/10.1007/s11661-004-0157-xopenalex-snapshot
Influence of microstructure on tensile and creep properties of a new castable TiAl-based alloy
inferred← citeshttps://doi.org/10.1007/s11661-008-9578-2openalex-snapshot
An Experimental Assessment of the Effects of Heat Treatment on the Microstructure of Ti-47Al-2Cr-2Nb Powder Compacts
inferred← citeshttps://doi.org/10.1007/s11661-023-07290-8openalex-snapshot
Investigation of Survived Solidification Features After Hot Isostatic Pressing in Third Generation γ-TiAl Alloys: Ti–45Al–(5, 10)Nb–0.2B–0.2C
inferred← citeshttps://doi.org/10.1007/s11665-021-05468-yopenalex-snapshot
Bias Voltage for Avoiding Fatigue Strength Degradation Due to TiAlN Coating on Ti-Alloy Substrates
inferred← citeshttps://doi.org/10.1007/s11665-021-06278-yopenalex-snapshot
Tribological Behavior of Laser Surface Melted γ-TiAl Fabricated by Electron Beam Additive Manufacturing
inferred← citeshttps://doi.org/10.1007/s11771-002-0045-8openalex-snapshot
Physical simulation of hot deformation of TiAl based alloy
inferred← citeshttps://doi.org/10.1007/s11837-000-0069-1openalex-snapshot
Microstructural control in Ti-Al for enhanced mechanical properties
inferred← citeshttps://doi.org/10.1007/s11837-015-1774-0openalex-snapshot
In Situ Synchrotron X-Ray Diffraction and Small Angle X-Ray Scattering Studies on Rapidly Heated and Cooled Ti-Al and Al-Cu-Mg Alloys Using Laser-Based Heating
inferred← citeshttps://doi.org/10.1007/s11837-016-2252-zopenalex-snapshot
Sintering Behavior and Microstructure Formation of Titanium Aluminide Alloys Processed by Metal Injection Molding
inferred← citeshttps://doi.org/10.1007/s11837-017-2582-5openalex-snapshot
Fabrication of Functionally Graded Ti and γ-TiAl by Laser Metal Deposition
inferred← citeshttps://doi.org/10.1007/s11837-019-03767-3openalex-snapshot
Element Distribution in Oxygen-Enriched Bottom-Blown Smelting of High-Arsenic Copper Dross
inferred← citeshttps://doi.org/10.1007/s11837-020-04393-0openalex-snapshot
A Novel Surface Treatment Technique for Titanium Alloys
inferred← citeshttps://doi.org/10.1007/s11837-022-05262-8openalex-snapshot
Tailored Fully Lamellar Microstructure of a Newly Developed Mn-Containing β-Solidifying γ-TiAl Alloys Rolled Bar
inferred← citeshttps://doi.org/10.1007/s42243-024-01202-9openalex-snapshot
Influence of heat treatment on microstructure of a new β-solidifying γ-TiAl alloy
inferred← citeshttps://doi.org/10.1016/b978-0-12-814062-8.00013-3openalex-snapshot
Additive manufacturing of titanium aluminides
inferred← citeshttps://doi.org/10.1016/j.addma.2021.102091openalex-snapshot
Peculiar microstructural evolution and tensile properties of β-containing γ-TiAl alloys fabricated by electron beam melting
inferred← citeshttps://doi.org/10.1016/j.apt.2016.10.001openalex-snapshot
Titanium aluminide (Ti-48Al) powder synthesis, size refinement and sintering
inferred← citeshttps://doi.org/10.1016/j.cirp.2007.05.027openalex-snapshot
Machining of High Strength Light Weight Alloys for Engine Applications
inferred← citeshttps://doi.org/10.1016/j.intermet.2011.03.014openalex-snapshot
Influence of an oxidation protective coating upon hot corrosion and mechanical behaviour of Ti–48Al–2Cr–2Nb alloy
inferred← citeshttps://doi.org/10.1016/j.intermet.2014.12.014openalex-snapshot
The solidification path related columnar-to-equiaxed transition in Ti–Al alloys
inferred← citeshttps://doi.org/10.1016/j.intermet.2024.108263openalex-snapshot
Identifying low-cost, machinable, impact-resistant TiAl alloys suitable for last-stage turbine blades of jet engines
inferred← citeshttps://doi.org/10.1016/j.intermet.2025.108793openalex-snapshot
Comparison of the impact resistance of TiAl4822 and TNM alloy under expected service conditions of jet engine blades
inferred← citeshttps://doi.org/10.1016/j.jallcom.2016.12.214openalex-snapshot
Flow behavior and processing maps of Ti-44.5Al-3.8Nb-1.0Mo-0.3Si-0.1B alloy
inferred← citeshttps://doi.org/10.1016/j.jallcom.2017.09.163openalex-snapshot
Effects of HIP on microstructural heterogeneity, defect distribution and mechanical properties of additively manufactured EBM Ti-48Al-2Cr-2Nb
inferred← citeshttps://doi.org/10.1016/j.jallcom.2018.11.150openalex-snapshot
In-situ neutron diffraction characterization on the phase evolution of γ-TiAl alloy during the wire-arc additive manufacturing process
inferred← citeshttps://doi.org/10.1016/j.jallcom.2021.159946openalex-snapshot
Laser deposition of graded γ-TiAl/Ti2AlNb alloys: Microstructure and nanomechanical characterization of the transition zone
inferred← citeshttps://doi.org/10.1016/j.jallcom.2022.167262openalex-snapshot
Development of gamma titanium aluminide (γ-TiAl) alloys: A review
inferred← citeshttps://doi.org/10.1016/j.jallcom.2025.181174openalex-snapshot
Long-term oxidation behavior of sputtered double-layer TiAlCrY/TiAlCrNb coatings on TiAl alloys at 1000 ℃
inferred← citeshttps://doi.org/10.1016/j.jallcom.2026.190423openalex-snapshot
Formation and mechanical properties of oriented lamellar microstructures in a β-solidifying γ-TiAl alloy fabricated by laser powder bed fusion
inferred← citeshttps://doi.org/10.1016/j.jmatprotec.2025.118957openalex-snapshot
From high cooling rates to high creep performance: Role of metastable beta in in-situ alloyed Ti64-TiAl alloys fabricated by laser powder bed fusion
inferred← citeshttps://doi.org/10.1016/j.jmrt.2024.12.031openalex-snapshot
Study of the corrosion behavior of cast Ti2AlNb alloy in HF–HNO3 solution
inferred← citeshttps://doi.org/10.1016/j.jmst.2025.03.004openalex-snapshot
Electron beam powder bed fusion of TiAl alloy with controllable microstructure and strength
inferred← citeshttps://doi.org/10.1016/j.matchar.2015.05.020openalex-snapshot
Grain refinement by trace TiB2 addition in conventional cast TiAl-based alloy
inferred← citeshttps://doi.org/10.1016/j.matchar.2024.114526openalex-snapshot
High cycle fatigue properties of Ti-48Al-2Cr-2Nb alloy additively manufactured via twin-wire directed energy deposition-arc
inferred← citeshttps://doi.org/10.1016/j.matdes.2021.109501openalex-snapshot
Laser powder bed fusion of titanium aluminides: An investigation on site-specific microstructure evolution mechanism
inferred← citeshttps://doi.org/10.1016/j.msea.2004.01.021openalex-snapshot
Using cold roll bonding and annealing to process Ti/Al multi-layered composites from elemental foils
inferred← citeshttps://doi.org/10.1016/j.msea.2016.03.005openalex-snapshot
Hot deformation behavior of β phase containing γ-TiAl alloy
inferred← citeshttps://doi.org/10.1016/j.msea.2016.09.105openalex-snapshot
Tensile properties and fracture behavior of in-situ synthesized Ti 2 AlN/Ti48Al2Cr2Nb composites at room and elevated temperatures
inferred← citeshttps://doi.org/10.1016/j.msea.2017.12.092openalex-snapshot
Microstructure evolution and tensile properties of conventional cast TiAl-based alloy with trace Ni addition
inferred← citeshttps://doi.org/10.1016/j.msea.2018.04.025openalex-snapshot
Macro/microstructure evolution and mechanical properties of Ti33.3Al alloys by adding WC particles
inferred← citeshttps://doi.org/10.1016/j.msea.2019.04.046openalex-snapshot
Formation of Ti2AlN and TiB and its effect on mechanical properties of Ti46Al4Nb1Mo alloy by adding BN particles
inferred← citeshttps://doi.org/10.1016/j.msea.2021.141723openalex-snapshot
Enhancing high-temperature strength and ductility of γ-TiAl matrix composites with controllable dual alloy structure
inferred← citeshttps://doi.org/10.1016/j.msea.2022.144053openalex-snapshot
Effects of cycle heat treatment on the microstructure and mechanical property of as-cast γ-TiAl alloy
inferred← citeshttps://doi.org/10.1016/j.msea.2023.144907openalex-snapshot
Laser powder bed fusion (L-PBF) of Ti–6Al–4V/Ti–6Al–2Sn–4Zr–2Mo and Ti–6Al–4V/γ-TiAl bimetals: Processability, interface and mechanical properties
inferred← citeshttps://doi.org/10.1016/j.msea.2024.146147openalex-snapshot
Modification of microstructure and mechanical properties for twin-wire directed energy deposition-arc fabricated Ti–48Al–2Cr–2Nb alloys via current regulation
inferred← citeshttps://doi.org/10.1016/j.msea.2026.150664openalex-snapshot
Achieving superior strength-ductility synergy in TiAl alloys via PBF-EB process optimization guided by machine learning-based nondestructive defect prediction
inferred← citeshttps://doi.org/10.1016/j.procir.2016.02.207openalex-snapshot
Results of Surface Integrity and Fatigue Study of PECM and PEO Processed γ-TiAl for Turbine Applications
inferred← citeshttps://doi.org/10.1016/j.proeng.2011.04.605openalex-snapshot
Defect tolerance of a gamma titanium aluminide alloy
inferred← citeshttps://doi.org/10.1016/j.revmat.2026.100181openalex-snapshot
Properties, process and development of TiAl Alloys: A review
inferred← citeshttps://doi.org/10.1016/j.scriptamat.2007.05.020openalex-snapshot
Diffusion bonding of laser-surface-modified gamma titanium aluminide alloy to nickel-base casting alloy
inferred← citeshttps://doi.org/10.1016/j.surfcoat.2015.07.072openalex-snapshot
Improvement of oxidation resistance of Ti–47Al–2W–0.5Si alloy modified by aluminizing method
inferred← citeshttps://doi.org/10.1016/j.surfcoat.2021.128000openalex-snapshot
Effect of TiAlCrNb buffer layer on thermal cycling behavior of YSZ/TiAlCrY coatings on γ-TiAl alloys
inferred← citeshttps://doi.org/10.1016/j.surfcoat.2024.130601openalex-snapshot
Oxidation behavior of Ti2AlC MAX phase-based coating on a γ-TiAl alloy TiAl48-2-2 produced by DC magnetron sputtering
inferred← citeshttps://doi.org/10.1016/s0022-0248(03)01214-4openalex-snapshot
Effect of growth rate and composition on the primary spacing, the dendrite tip radius and mushy zone depth in the directionally solidified succinonitrile–Salol alloys
inferred← citeshttps://doi.org/10.1016/s0025-5408(00)00285-3openalex-snapshot
Dependency of the microstructure parameters on the solidification parameters for camphene
inferred← citeshttps://doi.org/10.1016/s0043-1648(01)00575-0openalex-snapshot
Workpiece surface integrity considerations when finish turning gamma titanium aluminide
inferred← citeshttps://doi.org/10.1016/s0257-8972(03)00747-3openalex-snapshot
Surface characterization of cast Ti-6Al-4V in hydrofluoric-nitric pickling solutions
inferred← citeshttps://doi.org/10.1016/s0921-5093(00)01391-5openalex-snapshot
Synthesis of nanocrystalline materials — an overview
inferred← citeshttps://doi.org/10.1016/s0921-5093(02)00064-3openalex-snapshot
Review of the effect of alloy composition on the growth rates of scales formed during oxidation of gamma titanium aluminide alloys
inferred← citeshttps://doi.org/10.1016/s0921-5093(98)01066-1openalex-snapshot
Preliminary characterisation of a plasma sprayed MoSi2/Sigma SiC fibre monotape
inferred← citeshttps://doi.org/10.1016/s0966-9795(01)00121-2openalex-snapshot
Effects of high niobium addition on the mechanical properties and high-temperature deformability of gamma TiAl alloy
inferred← citeshttps://doi.org/10.1016/s0966-9795(98)00024-7openalex-snapshot
Rotating strength of forged TiAl alloys
inferred← citeshttps://doi.org/10.1016/s1003-6326(11)61606-3openalex-snapshot
Fabrication of Ti-Al complex with superior deformation capability by pressure infiltration
inferred← citeshttps://doi.org/10.1016/s1359-0286(99)00023-6openalex-snapshot
Gamma Ti aluminides for non-aerospace applications
inferred← citeshttps://doi.org/10.1016/s1359-6462(00)00558-3openalex-snapshot
Residual stress development during fabrication and processing of gamma-titanium based composites
inferred← citeshttps://doi.org/10.1023/a:1004772730707openalex-snapshot
Investigation of the structure parameters according to the solidification parameters for pivalic acid
inferred← citeshttps://doi.org/10.1023/a:1004829413966openalex-snapshot
The directional solidification of Pb-Sn alloys
inferred← citeshttps://doi.org/10.1080/02670836.2017.1413036openalex-snapshot
The characteristics of TiAl-based alloys melted in graphite crucibles
inferred← citeshttps://doi.org/10.1080/09603409.2016.1183068openalex-snapshot
TiAl alloys in commercial aircraft engines
inferred← citeshttps://doi.org/10.1080/10408436.2021.1989664openalex-snapshot
Electrochemical and thermal-induced degradation of additively manufactured titanium alloys: a review
inferred← citeshttps://doi.org/10.1109/iccet.2010.5486100openalex-snapshot
Notice of Retraction: Process optimization for isothermal forging of TiAl compressor blade by numerical simulation
inferred← citeshttps://doi.org/10.1116/1.5094835openalex-snapshot
Thermal cyclic oxidation behavior of γ-TiAl with in situ post-annealed Al-Si-Y coating
inferred← citeshttps://doi.org/10.1179/026708301101509412openalex-snapshot
Temperature control of TiAl melt during induction skull melting
inferred← citeshttps://doi.org/10.1179/026708301101509827openalex-snapshot
Some aspects of synthesis of nanocrystalline materials
inferred← citeshttps://doi.org/10.1360/tb-2023-0037openalex-snapshot
Structures, microstructures, properties, and applications of TiAl alloys
inferred← citeshttps://doi.org/10.1361/105994902770343782openalex-snapshot
A Composite Cylinder Model for the Prediction of Residual Stresses in Gamma-Titanium Composites
inferred← citeshttps://doi.org/10.1520/jai104293openalex-snapshot
Fatigue Sensitivity to Small Defects of a Gamma–Titanium–Aluminide Alloy
inferred← citeshttps://doi.org/10.1520/stp154620120014openalex-snapshot
Fatigue Sensitivity to Small Defects of a Gamma–Titanium–Aluminide Alloy
inferred← citeshttps://doi.org/10.1520/stp49552topenalex-snapshot
Fatigue Sensitivity to Small Defects of a Gamma–Titanium–Aluminide Alloy
inferred← citeshttps://doi.org/10.1533/9780857092779.1.83openalex-snapshot
The use of laser surface modification in combined superplastic forming and diffusion bonding of metals
inferred← citeshttps://doi.org/10.15407/ufm.05.02.219openalex-snapshot
Nanoscale States in Metals, Alloys, and Intermetallic Compounds: Methods of Manufacture, Structure, Properties
inferred← citeshttps://doi.org/10.21203/rs.3.rs-9889865/v1openalex-snapshot
Effects of drawing rate on microstructure and tensile properties of directionally solidified Ti-48Al-2Cr-2Nb alloys
inferred← citeshttps://doi.org/10.22215/etd/2010-08831openalex-snapshot
Hot isostatic pressing and heat treatment development of powder metallurgy beta gamma titanium aluminide alloys
inferred← citeshttps://doi.org/10.2320/jinstmet.ja202405openalex-snapshot
Effect of Scan Speed on Microstructure and Tensile Properties of Ti-48Al-2Cr-2Nb Alloys Fabricated via Additive Manufacturing
inferred← citeshttps://doi.org/10.2320/matertrans.mt-me2022012openalex-snapshot
Effect of Scan Speed on Microstructure and Tensile Properties of Ti–48Al–2Cr–2Nb Alloys Fabricated via Additive Manufacturing
inferred← citeshttps://doi.org/10.2493/jjspe.69.1579openalex-snapshot
Study on Ultrasonic Machining of TiAl
inferred← citeshttps://doi.org/10.31399/asm.tb.ttg2.t61120345openalex-snapshot
Selected References for Additional Reading
inferred← citeshttps://doi.org/10.3390/app8122637openalex-snapshot
TEG Design for Waste Heat Recovery at an Aviation Jet Engine Nozzle
inferred← citeshttps://doi.org/10.3390/books978-3-0365-4928-6openalex-snapshot
Materials, Design and Process Development for Additive Manufacturing
inferred← citeshttps://doi.org/10.3390/coatings8030113openalex-snapshot
The Influence of Aluminizing Process on the Surface Condition and Oxidation Resistance of Ti–45Al–8Nb–0.5(B, C) Alloy
inferred← citeshttps://doi.org/10.3390/cryst11070809openalex-snapshot
Improving the Tensile Properties of Additively Manufactured β-Containing TiAl Alloys via Microstructure Control Focusing on Cellular Precipitation Reaction
inferred← citeshttps://doi.org/10.3390/cryst12111669openalex-snapshot
High Temperature Fatigue Behavior and Failure Mechanism of Ti-45Al-4Nb-1Mo-0.15B Alloy
inferred← citeshttps://doi.org/10.3390/ma13183952openalex-snapshot
Additive Manufacturing of Ti-48Al-2Cr-2Nb Alloy Using Gas Atomized and Mechanically Alloyed Plasma Spheroidized Powders
inferred← citeshttps://doi.org/10.3390/ma14133477openalex-snapshot
Feasibility Study of Fluidic Sealing in Turbine Shroud
inferred← citeshttps://doi.org/10.3390/met11040635openalex-snapshot
Microstructure and Mechanical Properties of High Relative Density γ-TiAl Alloy Using Irregular Pre-Alloyed Powder
inferred← citeshttps://doi.org/10.3390/met12040544openalex-snapshot
Selection of Additive Elements Focusing on Impact Resistance in Practical TiAl Cast Alloys
inferred← citeshttps://doi.org/10.3390/met12122003openalex-snapshot
Impact Resistance of Commercially Applied TiAl Alloys and Simple-Composition TiAl Alloys at Various Temperatures
inferred← citeshttps://doi.org/10.3390/met13071235openalex-snapshot
Effect of Microstructure on Impact Resistance and Machinability of TiAl Alloys for Jet Engine Turbine Blade Applications
inferred← citeshttps://doi.org/10.3390/met13121991openalex-snapshot
Evaluation of Forged TiAl Alloy Usefulness Based on Their Impact Resistance
inferred← citeshttps://doi.org/10.3390/met14080908openalex-snapshot
Detrimental Effects of βo-Phase on Practical Properties of TiAl Alloys
inferred← citeshttps://doi.org/10.3390/met15050474openalex-snapshot
Effects of Composition on Melt Fillability and Impact Resistance of TiAl Alloys for Thin-Blade Turbine Wheels: Laboratory Predictions and Product Verification
inferred← citeshttps://doi.org/10.3390/met15101132openalex-snapshot
Influence of B on the Practical Properties of TiAl Alloys for Jet Engine Blades and a Comparison of TiAl4822 and XD Alloys
inferred← citeshttps://doi.org/10.3390/met16030335openalex-snapshot
Feasibility Study of Low-Al TiAl Alloys with α2 Phase-Dominated Fully Lamellar Structures for Use as Jet Engine Blades
inferred← citeshttps://doi.org/10.37904/metal.2020.3604openalex-snapshot
Microstructure and mechanical properties of TiAl-based alloy produced by selective laser melting
inferred← citeshttps://doi.org/10.37904/metal.2021.4076openalex-snapshot
Effects of heat treatment on microstructure and properties of selective laser melted titanium aluminide alloy
inferred← citeshttps://doi.org/10.4028/www.scientific.net/amr.217-218.1747openalex-snapshot
Preparation of Dense Ultrafine TiAl Alloys by Spark Plasma Synthesis from Mechanically Activated Powders
inferred← citeshttps://doi.org/10.4028/www.scientific.net/amr.233-235.2769openalex-snapshot
Synthesizing TiAl Alloy by Spark Plasma Sintering from Mechanically Activated Powders
inferred← citeshttps://doi.org/10.4028/www.scientific.net/amr.250-253.3309openalex-snapshot
Spark Plasma Sintering TiAl Alloy from Mechanically Activated Powders
inferred← citeshttps://doi.org/10.4028/www.scientific.net/amr.284-286.2336openalex-snapshot
TiAl Alloy Spark Plasma Sintered from Mechanically Activated Powders
inferred← citeshttps://doi.org/10.4028/www.scientific.net/kem.465.531openalex-snapshot
Fatigue Properties and Design Criteria of a Gamma Titanium Aluminide Alloy
inferred← citeshttps://doi.org/10.4028/www.scientific.net/kem.531-532.27openalex-snapshot
Superplasticity of a Ti-48Al-2.3Cr-0.2Mo Alloy
inferred← citeshttps://doi.org/10.4028/www.scientific.net/msf.475-479.813openalex-snapshot
Finite Element Simulation of Canned Forging on TiAl Alloy Containing High Nb
inferred← citeshttps://doi.org/10.4028/www.scientific.net/ssp.211.129openalex-snapshot
Multi-Stage Heat Treatment of Second Generation TiAl Based Alloys
inferred← citeshttps://doi.org/10.4028/www.scientific.net/ssp.229.125openalex-snapshot
Microstructure and Properties of a New Generation of TiAl Based Alloys
inferred← citeshttps://doi.org/10.4150/kpmi.2017.24.3.235openalex-snapshot
Effect of Mn Addition on Sintering Properties of Ti-10wt.%Al-xMn Powder Alloy
inferred← citeshttps://doi.org/10.5281/zenodo.25925openalex-snapshot
Plagiolepis Vindobonensis N. Sp. (Hym. Formicidae).
inferred← citeshttps://doi.org/10.7791/jspmee.12.142openalex-snapshot
3D Printing Technology of β-containing TiAl Alloy for Weight Reduction of Jet Engine
Editorial review for independent work. ICSAC — the Institute for Complexity
Science and Advanced Computing — runs a structured editorial panel for researchers
publishing outside journals, and publishes on CiteStamp rails. Submission is free
and goes through ORCID: icsacinstitute.org/submit.