On the public citation graph
Selection of the Machining Inclination Angle in High-Speed Ball End Milling
0 signed · 74 inferred · view as graph
Inferred edges come from two machine sources: sweeps of open repository metadata (mostly SSRN and Zenodo), and a bulk OpenAlex citation snapshot. Every row below is labelled with the one it came from. Neither is a complete citation index — absence here is not evidence of absence.
Is this your work? Sign in with ORCID and put your name on the
claims that are yours.
Reference health. See whether every reference in this work resolves to a
known work and none has been retracted — and get a dated CiteStamped
badge you can embed.
What this work says
Outgoing claims: the papers this work cites, builds on, or argues with.
inferredcites →https://doi.org/10.1016/s0007-8506(07)60775-6openalex-snapshot
High-Speed Milling of Dies and Molds in Their Hardened State
inferredcites →https://doi.org/10.1016/s0007-8506(07)62270-7openalex-snapshot
High-Speed Milling of Dies and Moulds — Cutting Conditions and Technology
inferredcites →https://doi.org/10.1016/s0007-8506(07)63087-xopenalex-snapshot
Machine Tool Design Requirements for High-Speed Machining
inferredcites →https://doi.org/10.1016/s0007-8506(16)30164-0openalex-snapshot
Machining of Hard Materials
inferredcites →https://doi.org/10.1115/1.2831010openalex-snapshot
High-Speed End Milling Using a Feedforward Control Architecture
What points at this work
Incoming claims: where this work appears in other papers’ reference lists and arguments.
inferred← citeshttps://doi.org/10.2139/ssrn.4159712openalex-extracted
Machining Inclination Selection Method for Surface Milling of Cfrp Workpieces with Low Cutting-Induced Damage
inferred← citeshttps://doi.org/10.1007/978-1-4614-4226-4_23openalex-snapshot
Experimental Study of High Speed Ball End Milling of Titanium Alloy (Ti-6Al-4V)
inferred← citeshttps://doi.org/10.1007/978-3-030-18682-1_6openalex-snapshot
Analysis of the Geometry and Surface of the Knife Blade After Milling with a Various Strategies
inferred← citeshttps://doi.org/10.1007/978-3-030-54817-9_107openalex-snapshot
Cutting Forces and Roughness During Ball End Milling of Inclined Surfaces
inferred← citeshttps://doi.org/10.1007/978-3-319-95630-5_119openalex-snapshot
Modelling of Cutting Forces in Ball-End Milling
inferred← citeshttps://doi.org/10.1007/s00170-004-2297-yopenalex-snapshot
Optimal selection of machining direction for three-axis milling of sculptured parts
inferred← citeshttps://doi.org/10.1007/s00170-006-0515-5openalex-snapshot
Optimal selection of machining direction for three-axis milling of sculptured parts
inferred← citeshttps://doi.org/10.1007/s00170-010-2686-3openalex-snapshot
Model for the prediction of 3D surface topography in 5-axis milling
inferred← citeshttps://doi.org/10.1007/s00170-012-4549-6openalex-snapshot
Experimental study of the effect of tool orientation in five-axis micro-milling of brass using ball-end mills
inferred← citeshttps://doi.org/10.1007/s00170-014-5672-3openalex-snapshot
Cutting speed modelling in ball nose milling applications
inferred← citeshttps://doi.org/10.1007/s00170-014-6221-9openalex-snapshot
Five-axis tool path and feed rate optimization based on the cutting force–area quotient potential field
inferred← citeshttps://doi.org/10.1007/s00170-015-7134-yopenalex-snapshot
Experimental study of the effect of tool orientation on cutter deflection in five-axis filleted end dry milling of ultrahigh-strength steel
inferred← citeshttps://doi.org/10.1007/s00170-016-8948-yopenalex-snapshot
Effect of cutter path orientations on cutting forces, tool wear, and surface integrity when ball end milling TC17
inferred← citeshttps://doi.org/10.1007/s00170-017-0523-7openalex-snapshot
Effects of tool orientation and surface curvature on surface integrity in ball end milling of TC17
inferred← citeshttps://doi.org/10.1007/s00170-018-1774-7openalex-snapshot
Influence of tool path strategies on friction and wear behavior of high-speed ball-end-milled hardened AISI D2 steel
inferred← citeshttps://doi.org/10.1007/s00170-018-2380-4openalex-snapshot
A new approach for predicting wear overlap geometry in ball end finish milling
inferred← citeshttps://doi.org/10.1007/s00170-018-2622-5openalex-snapshot
Effect of tool inclination on surface quality of KDP crystal processed by micro ball-end milling
inferred← citeshttps://doi.org/10.1007/s00170-020-06040-zopenalex-snapshot
Multi-axis synchronization machining effects on free-form surface with image processing
inferred← citeshttps://doi.org/10.1007/s00170-022-09528-yopenalex-snapshot
Dynamic simulation and experimental study of cutting force by rake angle of multi-axis high-speed ball-end milling tool
inferred← citeshttps://doi.org/10.1007/s11740-019-00943-xopenalex-snapshot
Ball end micro milling of areal material measures: influence of the tilt angle on the resulting surface topography
inferred← citeshttps://doi.org/10.1007/s12206-019-0534-4openalex-snapshot
Adaptive method of 5-axis milling of sculptured surfaces elements with a curved line contour
inferred← citeshttps://doi.org/10.1007/s12206-024-0311-xopenalex-snapshot
Study on cutting performance of micro-textured ball-end milling cutter with multiple distribution density under the action of cutting edge
inferred← citeshttps://doi.org/10.1007/s40430-019-1668-0openalex-snapshot
Influence of feed direction on finishing milling cylindrical surfaces in H13 hardened steel
inferred← citeshttps://doi.org/10.1016/j.cirpj.2017.06.003openalex-snapshot
Tool orientation optimization of 5-axis ball-end milling based on an accurate cutter/workpiece engagement model
inferred← citeshttps://doi.org/10.1016/j.compstruct.2022.116495openalex-snapshot
Machining inclination selection method for surface milling of CFRP workpieces with low cutting-induced damage
inferred← citeshttps://doi.org/10.1016/j.ijmachtools.2004.11.019openalex-snapshot
A study of the surface scallop generating mechanism in the ball-end milling process
inferred← citeshttps://doi.org/10.1016/j.ijmachtools.2008.10.007openalex-snapshot
Effect of tilt angle on cutting regime transition in glass micromilling
inferred← citeshttps://doi.org/10.1016/j.ijmachtools.2014.10.006openalex-snapshot
The estimation of cutting forces and specific force coefficients during finishing ball end milling of inclined surfaces
inferred← citeshttps://doi.org/10.1016/j.jmatprotec.2007.01.006openalex-snapshot
Modelling of cutting forces in ball-end milling with tool–surface inclination
inferred← citeshttps://doi.org/10.1016/j.jmatprotec.2007.01.007openalex-snapshot
Modelling of cutting forces in ball-end milling with tool–surface inclination
inferred← citeshttps://doi.org/10.1016/j.jmatprotec.2007.04.129openalex-snapshot
Surface topography in ball end milling process: Description of a 3D surface roughness parameter
inferred← citeshttps://doi.org/10.1016/j.measurement.2012.03.001openalex-snapshot
Influence of milling strategy on the surface roughness in ball end milling of the aluminum alloy Al7075-T6
inferred← citeshttps://doi.org/10.1016/j.measurement.2018.12.040openalex-snapshot
Optimization of manufacturing complex-shaped gas turbine blades
inferred← citeshttps://doi.org/10.1016/j.phpro.2012.03.096openalex-snapshot
Surface Integrity of Titanium Alloy Ti-6Al-4V in Ball end Milling
inferred← citeshttps://doi.org/10.1016/j.procir.2012.04.052openalex-snapshot
Tool Life and Process Dynamics in High Speed Ball End Milling of Hardened Steel
inferred← citeshttps://doi.org/10.1016/j.procir.2014.03.102openalex-snapshot
Cutting Forces and Vibrations During Ball End Milling of Inclined Surfaces
inferred← citeshttps://doi.org/10.1016/j.procir.2014.03.108openalex-snapshot
The Influence of Tool Wear on the Vibrations During Ball end Milling of Hardened Steel
inferred← citeshttps://doi.org/10.1016/j.procir.2016.10.024openalex-snapshot
Effect of tool Inclination Angle on the Elastic Deformation of Thin-walled Parts in Multi-axis Ball-end Milling
inferred← citeshttps://doi.org/10.1016/j.procir.2016.10.044openalex-snapshot
Effect of Tool Orientation on Surface Integrity During Ball End Milling of Titanium Alloy TC17
inferred← citeshttps://doi.org/10.1016/j.procir.2018.05.060openalex-snapshot
Effect of milling modes on surface integrity of KDP crystal processed by micro ball-end milling
inferred← citeshttps://doi.org/10.1016/j.proeng.2017.10.589openalex-snapshot
The Influence of Dynamical Parameters on Surface Quality during Ball-End Milling
inferred← citeshttps://doi.org/10.1016/j.rinma.2023.100487openalex-snapshot
Investigation of machining quality indicators and effect of tool geometry parameters during the machining of difficult-to-machine metal
inferred← citeshttps://doi.org/10.1080/00207543.2020.1786187openalex-snapshot
A review on tool orientation planning in multi-axis machining
inferred← citeshttps://doi.org/10.1080/0951192x.2020.1858504openalex-snapshot
Precision and energy-efficient ball-end milling of Ti6Al4V turbine blades using particle swarm optimization
inferred← citeshttps://doi.org/10.1080/10584587.2022.2065573openalex-snapshot
Research on Surface Integrity of Mesoscopic Geometry Tool Milling Titanium Alloy
inferred← citeshttps://doi.org/10.1088/1742-6596/1345/3/032053openalex-snapshot
Study on multi-axis simulated NC machining for thin-walled impeller
inferred← citeshttps://doi.org/10.1088/1757-899x/564/1/012003openalex-snapshot
The influence of inclination of the axis of the toroidal tool on a flat surface roughness
inferred← citeshttps://doi.org/10.1088/2631-7990/acab3fopenalex-snapshot
Effect of tool geometry on ultraprecision machining of soft-brittle materials: a comprehensive review
inferred← citeshttps://doi.org/10.1108/ilt-01-2023-0022openalex-snapshot
Study on the milling performance of ball-end milling cutter under the combined action of micro-texture of rake and flank face
inferred← citeshttps://doi.org/10.1115/1.2039098openalex-snapshot
A Geometrical Simulation System of Ball End Finish Milling Process and Its Application for the Prediction of Surface Micro Features
inferred← citeshttps://doi.org/10.11606/d.18.2007.tde-13032007-234237openalex-snapshot
Estudo da rugosidade de superfícies planas usinadas por fresas de topo esférico
inferred← citeshttps://doi.org/10.1177/0954405415584898openalex-snapshot
Modelling and characterisation of roughness of moulds produced by high-speed machining with ball-nose end mill
inferred← citeshttps://doi.org/10.1177/1687814015590216openalex-snapshot
Investigation of wear and tool life of coated carbide and cubic boron nitride cutting tools in high speed milling
inferred← citeshttps://doi.org/10.1299/jamdsm.6.296openalex-snapshot
Establishing a Novel Model for 5-Axis Milling with a Filleted End Mill
inferred← citeshttps://doi.org/10.1371/journal.pone.0290760openalex-snapshot
Surface integrity optimization for ball-end hard milling of AISI D2 steel based on response surface methodology
inferred← citeshttps://doi.org/10.14393/ufu.di.2014.364openalex-snapshot
Determinação da usinabilidade dos aços ferramentas N2711M e VPATLAS no fresamento de topo
inferred← citeshttps://doi.org/10.1504/ijcat.2006.010990openalex-snapshot
A strategy for selection of the optimal machining sequence in high speed milling process
inferred← citeshttps://doi.org/10.2139/ssrn.6386065openalex-snapshot
Research on the Prediction of Surface Quality for Textured Coating Tools Milling Titanium Alloy Workpieces Under Thermal-Assisted Laser Processing
inferred← citeshttps://doi.org/10.2478/mms-2014-0014openalex-snapshot
SURFACE TEXTURE ANALYSIS AFTER BALL END MILLING WITH VARIOUS SURFACE INCLINATION OF HARDENED STEEL
inferred← citeshttps://doi.org/10.3390/app12168230openalex-snapshot
Two-Dimensional Profile Simulation Model for Five-Axis CNC Machining with Bull-Nose Cutter
inferred← citeshttps://doi.org/10.3390/app15158403openalex-snapshot
Comparison of the Wear of Toroidal and Spherical Cutters in Milling and the Impact of Corrosion
inferred← citeshttps://doi.org/10.3390/coatings14070814openalex-snapshot
Study on the Cutting Performance and Remaining Life Prediction of Micro-Texture Ball End Milling Cutters for Titanium Alloys
inferred← citeshttps://doi.org/10.3390/ma14010025openalex-snapshot
Increasing the Accuracy of Free-Form Surface Multiaxis Milling
inferred← citeshttps://doi.org/10.3390/ma14237143openalex-snapshot
Study on the Formation Mechanism of Surface Adhered Damage in Ball-End Milling Ti6Al4V
inferred← citeshttps://doi.org/10.3390/machines12050318openalex-snapshot
Influence of Tool Inclination and Effective Cutting Speed on Roughness Parameters of Machined Shaped Surfaces
inferred← citeshttps://doi.org/10.3390/met10070932openalex-snapshot
Empirical Models for Surface Roughness and Topography in 5-Axis Milling Based on Analysis of Lead Angle and Curvature Radius of Sculptured Surfaces
inferred← citeshttps://doi.org/10.4028/www.scientific.net/amm.760.367openalex-snapshot
Basic Conditions for 5-Axis Milling of Impeller Specific Surfaces
inferred← citeshttps://doi.org/10.4028/www.scientific.net/amr.97-101.2080openalex-snapshot
Effect of Tool Inclination Angle on Surface Quality in 5-Axis Ball-End Milling
inferred← citeshttps://doi.org/10.47749/t/unicamp.2012.846233openalex-snapshot
Análise da influência das condições de corte sobre o fresamento em acabamento de aços endurecidos usando altas velocidades
Editorial review for independent work. ICSAC — the Institute for Complexity
Science and Advanced Computing — runs a structured editorial panel for researchers
publishing outside journals, and publishes on CiteStamp rails. Submission is free
and goes through ORCID: icsacinstitute.org/submit.