On the public citation graph

Dimensional analyses and surface quality of the laser cutting process for engineering plastics

https://doi.org/10.1007/s00170-008-1468-7
0 signed · 77 inferred · view as graph

Inferred edges come from two machine sources: sweeps of open repository metadata (mostly SSRN and Zenodo), and a bulk OpenAlex citation snapshot. Every row below is labelled with the one it came from. Neither is a complete citation index — absence here is not evidence of absence.

Is this your work? Sign in with ORCID and put your name on the claims that are yours.
Claim with ORCID
Reference health. See whether every reference in this work resolves to a known work and none has been retracted — and get a dated CiteStamped badge you can embed.
See reference health

What this work says

Outgoing claims: the papers this work cites, builds on, or argues with.

inferredcites →https://doi.org/10.1007/bf01192285openalex-snapshot
Determining cutting speeds for the CO2 laser machining of decorative ceramic tile
inferredcites →https://doi.org/10.1007/s00170-006-0766-1openalex-snapshot
Evaluation of cutting quality of PMMA using CO2 lasers
inferredcites →https://doi.org/10.1007/s00170-006-0888-5openalex-snapshot
A statistical analysis of striation formation during laser cutting of ceramics
inferredcites →https://doi.org/10.1007/s001700050165openalex-snapshot
An Experimental Analysis and Optimisation of the CO2 Laser Cutting Process for Metallic Coated Sheet Steels
inferredcites →https://doi.org/10.1016/0043-1648(86)90259-0openalex-snapshot
Laser-cut mild steel — factors affecting edge quality
inferredcites →https://doi.org/10.1016/0924-0136(95)02094-2openalex-snapshot
Experimental investigation into CO2 laser cutting parameters
inferredcites →https://doi.org/10.1016/j.jmatprotec.2004.02.019openalex-snapshot
Laser cutting of different polymeric plastics (PE, PP and PC) by a CO2 laser beam
inferredcites →https://doi.org/10.1016/j.jmatprotec.2004.04.194openalex-snapshot
Laser cutting quality assessment and thermal efficiency analysis
inferredcites →https://doi.org/10.1016/j.jmatprotec.2007.06.056openalex-snapshot
Some experimental studies on CO2 laser cutting quality of polymeric materials
inferredcites →https://doi.org/10.1016/s0007-8506(07)62802-9openalex-snapshot
Adaptive Control for Laser Cutting Using Striation Frequency Analysis
inferredcites →https://doi.org/10.1016/s0890-6955(02)00270-5openalex-snapshot
CO2 laser cut quality of 4130 steel
inferredcites →https://doi.org/10.1016/s0924-0136(98)00079-xopenalex-snapshot
Design optimization of cutting parameters for turning operations based on the Taguchi method
inferredcites →https://doi.org/10.1080/00401706.1989.10488519openalex-snapshot
Taguchi Techniques for Quality Engineering
inferredcites →https://doi.org/10.1080/00401706.1993.10485047openalex-snapshot
Analysis of Variance in Experimental Design
inferredcites →https://doi.org/10.1080/10426919008953279openalex-snapshot
MACHINING PARAMETERS AND CUT QUALITY IN LASER CUTTING OF ARAMID FIBRE REINFORCED PLASTICS
inferredcites →https://doi.org/10.1080/10426919808935273openalex-snapshot
Study of Parameters for CO2Laser Cutting Process
inferredcites →https://doi.org/10.1108/01439910410541837openalex-snapshot
Laser processing of plastics
inferredcites →https://doi.org/10.1243/0954405971516211openalex-snapshot
The analysis of CO 2 laser cutting
inferredcites →https://doi.org/10.1504/ijmmp.2006.011653openalex-snapshot
Measurement of acoustic emission and deformations in laser cutting of deep-drawn sheet parts

What points at this work

Incoming claims: where this work appears in other papers’ reference lists and arguments.

inferred← citeshttps://doi.org/10.2139/ssrn.4498250openalex-extracted
Accuracy and Heat Affected Zone Study on Polycarbonate Co2 Laser Cutting
inferred← citeshttps://doi.org/10.1007/s00170-011-3677-8openalex-snapshot
Prediction of depth of cut for single-pass laser micro-milling process using semi-analytical, ANN and GP approaches
inferred← citeshttps://doi.org/10.1007/s00170-013-5098-3openalex-snapshot
The influence of organobentonite clay on CO2 laser grooving of nylon 6 composites
inferred← citeshttps://doi.org/10.1007/s00170-016-8887-7openalex-snapshot
Using orthogonal experimental method optimizing surface quality of CO2 laser cutting process for PMMA microchannels
inferred← citeshttps://doi.org/10.1007/s00170-016-8978-5openalex-snapshot
Selection of optimal machining parameters in pulsed CO2 laser cutting of Al6061/Al2O3 composite using Taguchi-based response surface methodology (T-RSM)
inferred← citeshttps://doi.org/10.1007/s00170-018-1856-6openalex-snapshot
The effect of bronze particles on CO2 laser cutting of reinforced polytetrafluoroethylene
inferred← citeshttps://doi.org/10.1007/s00170-018-2166-8openalex-snapshot
Comprehensive study of laser cutting effects on the properties of acrylonitrile butadiene styrene
inferred← citeshttps://doi.org/10.1007/s00170-021-07180-6openalex-snapshot
CO2 laser-air cutting of glass-fibre-reinforced unsaturated polyester (GFRUP): an experimental investigation
inferred← citeshttps://doi.org/10.1007/s00170-023-12812-0openalex-snapshot
An applicable review on recent laser beam cutting process characteristics modeling: geometrical, metallurgical, mechanical, and defect
inferred← citeshttps://doi.org/10.1007/s00339-016-0287-1openalex-snapshot
Estimation of the laser cutting operating cost by support vector regression methodology
inferred← citeshttps://doi.org/10.1007/s00542-010-1034-8openalex-snapshot
Direct bonding of PFTF sheets assisted by shynchrotron radiation induced surface modification
inferred← citeshttps://doi.org/10.1007/s10845-020-01617-7openalex-snapshot
Prediction of laser cutting parameters for polymethylmethacrylate sheets using random vector functional link network integrated with equilibrium optimizer
inferred← citeshttps://doi.org/10.1007/s12209-014-2104-2openalex-snapshot
Surface modification of Cu-Cr complex by NIR and MIR laser
inferred← citeshttps://doi.org/10.1007/s12541-023-00942-0openalex-snapshot
Investigation on Polymer Hybrid Composite Through CO2 Laser Machining for Precise Machining Conditions
inferred← citeshttps://doi.org/10.1007/s40430-022-03429-7openalex-snapshot
Effect of printing parameters and post-process on surface roughness and dimensional deviation of PLA parts fabricated by extrusion-based 3D printing
inferred← citeshttps://doi.org/10.1007/s40516-021-00142-6openalex-snapshot
Multi-objective Optimization of Kerf-taper and Surface-roughness Quality Characteristics for Cutting-operation On Coir and Carbon Fibre Reinforced Epoxy Hybrid Polymeric Composites During CO2-Pulsed Laser-cutting Using RSM
inferred← citeshttps://doi.org/10.1016/b978-0-08-096532-1.00911-0openalex-snapshot
Laser Applications in the Field of Plastics
inferred← citeshttps://doi.org/10.1016/b978-0-12-803581-8.04019-4openalex-snapshot
High Power CO2 Laser Cutting for Advanced Materials – Review
inferred← citeshttps://doi.org/10.1016/b978-0-12-803581-8.11670-4openalex-snapshot
CO2 Laser Cutting Process of PMMA
inferred← citeshttps://doi.org/10.1016/b978-0-12-820352-1.00046-8openalex-snapshot
Manufacturing Low-Cost Fluidic and Heat Transfer Devices With Polymer Materials by Selective Transmission Laser Welding
inferred← citeshttps://doi.org/10.1016/j.ijleo.2020.164932openalex-snapshot
Simulation, statistical modeling, and optimization of CO2 laser cutting process of polycarbonate sheets
inferred← citeshttps://doi.org/10.1016/j.ijlmm.2023.01.004openalex-snapshot
Influence of post-processing CO2 laser cutting and FFF 3D printing parameters on the surface morphology of PLAs: Statistical modelling and RSM optimisation
inferred← citeshttps://doi.org/10.1016/j.infrared.2025.106100openalex-snapshot
Processing of PTFE films using a short-pulse CO2 laser with flat-top and doughnut beams
inferred← citeshttps://doi.org/10.1016/j.jmapro.2023.04.059openalex-snapshot
CO2 laser cutting of reinforced polyester (CGFRP and GFRP) sheets: An experimental investigation into specific point energy, cutting volume efficiency and material removal rate (MRR)
inferred← citeshttps://doi.org/10.1016/j.matdes.2010.03.035openalex-snapshot
Effect of process parameters and optimization of CO2 laser cutting of ultra high-performance polyethylene
inferred← citeshttps://doi.org/10.1016/j.matdes.2014.09.011openalex-snapshot
Effects of surface quality and loading history on fatigue life of laser-machined poly(methyl methacrylate)
inferred← citeshttps://doi.org/10.1016/j.measurement.2015.06.003openalex-snapshot
Optimization of laser cutting parameters for Al6061/SiCp/Al2O3 composite using grey based response surface methodology (GRSM)
inferred← citeshttps://doi.org/10.1016/j.optlaseng.2012.02.017openalex-snapshot
Hole qualities in laser trepanning of polymeric materials
inferred← citeshttps://doi.org/10.1016/j.optlaseng.2013.04.017openalex-snapshot
Experimental evaluation of laser cut quality of glass fibre reinforced plastic composite
inferred← citeshttps://doi.org/10.1016/j.optlastec.2009.09.006openalex-snapshot
Laser cutting of polymeric materials: An experimental investigation
inferred← citeshttps://doi.org/10.1016/j.rinma.2021.100185openalex-snapshot
Laser cut seals for redox flow battery prototypes
inferred← citeshttps://doi.org/10.1016/j.sna.2026.118485openalex-snapshot
DOE-assisted CO2-laser machining of PMMA microfluidic devices with sub-50-µm channel and optically smooth surfaces
inferred← citeshttps://doi.org/10.1080/10426914.2021.1906892openalex-snapshot
An investigation of surface quality characteristics of 3D printed PLA plates cut by CO2 laser using experimental design
inferred← citeshttps://doi.org/10.1177/0954405420911529openalex-snapshot
Laser cutting optimization model with constraints: Maximization of material removal rate in CO 2 laser cutting of mild steel
inferred← citeshttps://doi.org/10.1177/09544054221126945openalex-snapshot
Theoretical and experimental investigations for geometrical error during hemispherical cavity machining on CO 2 laser
inferred← citeshttps://doi.org/10.1177/09544054251326326openalex-snapshot
Analysis of cut radii dimensional accuracy in CO 2 fusion laser cutting
inferred← citeshttps://doi.org/10.1201/b15846-8openalex-snapshot
Basic Statistical Inference
inferred← citeshttps://doi.org/10.1515/mt-2024-0127openalex-snapshot
Optimization of cutting parameters in manufacturing of polymeric materials for flexible two-phase thermal management systems
inferred← citeshttps://doi.org/10.17482/uujfe.99888openalex-snapshot
FARKLI MALZEMELERİN LAZERLE KESİLMESİ
inferred← citeshttps://doi.org/10.21203/rs.3.rs-235379/v1openalex-snapshot
CO2 laser cutting of glass-fibre-reinforced unsaturated polyester (GFRUP): an experimental investigation
inferred← citeshttps://doi.org/10.21741/9781644902479-147openalex-snapshot
Investigation of machining performance of lead-free brass materials forged in different conditions after cooling with liquid nitrogen
inferred← citeshttps://doi.org/10.2351/1.5048055openalex-snapshot
Developing an algorithm for predicting depth as well as number of passes during CO2 laser machining on thermoplastic material
inferred← citeshttps://doi.org/10.2351/1.5087846openalex-snapshot
Experimental and statistical study on kerf taper angle during CO2 laser cutting of thermoplastic material
inferred← citeshttps://doi.org/10.2478/ama-2019-0015openalex-snapshot
Investigations of Polypropylene Foil Cutting Process Using Fiber Nb: Yag and Diode Nd:YVO4 Lasers
inferred← citeshttps://doi.org/10.2478/fcds-2020-0017openalex-snapshot
A Holistic Approach to Polymeric Material Selection for Laser Beam Machining using Methods of DEA and TOPSIS
inferred← citeshttps://doi.org/10.29019/enfoqueute.v11n3.572openalex-snapshot
Estudio experimental sobre el corte con láser de CO2 a baja potencia del compuesto de plástico reforzado con fibras naturales
inferred← citeshttps://doi.org/10.3390/jmmp7020077openalex-snapshot
Kerf Geometry and Surface Roughness Optimization in CO2 Laser Processing of FFF Plates Utilizing Neural Networks and Genetic Algorithms Approaches
inferred← citeshttps://doi.org/10.3390/machines10020153openalex-snapshot
Application of a Robust Decision-Making Rule for Comprehensive Assessment of Laser Cutting Conditions and Performance
inferred← citeshttps://doi.org/10.3390/polym12030550openalex-snapshot
Post-Processing of FDM 3D-Printed Polylactic Acid Parts by Laser Beam Cutting
inferred← citeshttps://doi.org/10.3390/polym15132933openalex-snapshot
Polymeric Materials Selection for Flexible Pulsating Heat Pipe Manufacturing Using a Comparative Hybrid MCDM Approach
inferred← citeshttps://doi.org/10.36306/konjes.1622701openalex-snapshot
INVESTIGATION OF THE MACHINABILITY OF PEEK, PP AND PTFE HIGH PERFORMANCE ENGINEERING THERMOPLASTICS FOLLOWING HEAT TREATMENT
inferred← citeshttps://doi.org/10.4028/www.scientific.net/amm.110-116.4109openalex-snapshot
Neuro Fuzzy Modeling of Laser Beam Cutting Process
inferred← citeshttps://doi.org/10.5254/rct.14.85960openalex-snapshot
EXPERIMENTAL STUDY ON THE CO2 LASER CUTTING OF NOVEL POLYAMIDE 6/FLUOROELASTOMER THERMOPLASTIC ELASTOMERIC BLENDS
inferred← citeshttps://doi.org/10.54684/ijmmt.2021.13.3.134openalex-snapshot
A COMPARATIVE ANALYSIS OF MACHINING PARAMETERS INFLUENCE ON ACCURACY AND ROUGHNESS IN WATERJET AND LASER CUTTING
inferred← citeshttps://doi.org/10.55041/ijsrem16563openalex-snapshot
Study of Process Parameter of LBM for Machining SS-304
inferred← citeshttps://doi.org/10.5897/ijps11.460openalex-snapshot
Comparative analysis of abrasive waterjet (AWJ) technology with selected unconventional manufacturing processes
inferred← citeshttps://doi.org/10.5897/ijps12.109openalex-snapshot
Comparative modeling of CO2 laser cutting using multiple regression analysis and artificial neural network
inferred← citeshttps://doi.org/10.7735/ksmte.2022.31.6.375openalex-snapshot
Effect of the Specimen Fabrication Process on the Ultrasonic Fatigue Test for Engineering Plastics
Editorial review for independent work. ICSAC — the Institute for Complexity Science and Advanced Computing — runs a structured editorial panel for researchers publishing outside journals, and publishes on CiteStamp rails. Submission is free and goes through ORCID: icsacinstitute.org/submit.