On the public citation graph
Reduction of power and lubricant oil consumption in milling process using a new SiO2 nanolubrication system
0 signed · 140 inferred · view as graph
Inferred edges come from two machine sources: sweeps of open repository metadata (mostly SSRN and Zenodo), and a bulk OpenAlex citation snapshot. Every row below is labelled with the one it came from. Neither is a complete citation index — absence here is not evidence of absence.
Is this your work? Sign in with ORCID and put your name on the
claims that are yours.
Reference health. See whether every reference in this work resolves to a
known work and none has been retracted — and get a dated CiteStamped
badge you can embed.
What this work says
Outgoing claims: the papers this work cites, builds on, or argues with.
inferredcites →https://doi.org/10.1007/s00170-007-1079-8openalex-snapshot
Performance improvement of hard turning with solid lubricants
inferredcites →https://doi.org/10.1007/s00170-007-1083-zopenalex-snapshot
Optimization of the design parameters of modified die in hydro-mechanical deep drawing using LS-DYNA
inferredcites →https://doi.org/10.1007/s00170-011-3289-3openalex-snapshot
Study on tool wear characteristics in diamond turning of reaction-bonded silicon carbide
inferredcites →https://doi.org/10.1007/s001700050132openalex-snapshot
Cutting Force Analysis in Transient State Milling Processes
inferredcites →https://doi.org/10.1016/j.ijmachtools.2005.04.008openalex-snapshot
Experimental investigation to study the effect of solid lubricants on cutting forces and surface quality in end milling
inferredcites →https://doi.org/10.1016/j.ijmachtools.2008.09.007openalex-snapshot
Investigation into minimal-cutting-fluid application in high-speed milling of hardened steel using carbide mills
inferredcites →https://doi.org/10.1016/s0043-1648(00)00474-9openalex-snapshot
Formation of a transfer layer at the tool-chip interface during machining
inferredcites →https://doi.org/10.1016/s0043-1648(97)00059-8openalex-snapshot
The effect of extremely low lubricant volumes in machining
inferredcites →https://doi.org/10.1016/s0924-0136(00)00445-3openalex-snapshot
Dry machining: Machining of the future
inferredcites →https://doi.org/10.1016/s0924-0136(02)01112-3openalex-snapshot
Analysis of process parameters in surface grinding with graphite as lubricant based on the Taguchi method
inferredcites →https://doi.org/10.1080/10910340601172198openalex-snapshot
PERFORMANCE IMPROVEMENT OF SiC GRINDING USING SOLID LUBRICANTS
inferredcites →https://doi.org/10.1080/10910340701539940openalex-snapshot
EXPERIMENTAL STUDY ON LUBRICATION MECHANISM IN MQL INTERMITTENT CUTTING PROCESS
inferredcites →https://doi.org/10.1080/10910340801918275openalex-snapshot
CORRELATION BETWEEN DRILL GEOMETRY AND MECHANICAL FORCES IN MQL CONDITIONS
inferredcites →https://doi.org/10.1080/10940349908945694openalex-snapshot
THE INTERACTION BETWEEN TOOL MATERIAL, ENVIRONMENT, AND PROCESS CONDITIONS IN THE MACHINING OF ALUMINIUM ALLOYS
inferredcites →https://doi.org/10.1081/amp-120029850openalex-snapshot
Performance Improvement of Grinding of SiC Using Graphite as a Solid Lubricant
inferredcites →https://doi.org/10.1081/mst-120018959openalex-snapshot
Application of Solid Lubricants in Grinding: Investigations on Graphite Sandwiched Grinding Wheels
inferredcites →https://doi.org/10.1108/17260531011034664openalex-snapshot
Investigating the cutting forces in heat treated medium carbon steel when turning on a lathe machine
inferredcites →https://doi.org/10.1179/026708397790302151openalex-snapshot
Fracture mechanisms in chip formation processes
inferredcites →https://doi.org/10.1243/0954405991517209openalex-snapshot
Aspects of cooling lubrication reduction in machining advanced materials
What points at this work
Incoming claims: where this work appears in other papers’ reference lists and arguments.
inferred← citeshttps://doi.org/10.5281/zenodo.1331910openalex-extracted
A Fuzzy Logic Based Model To Predict Surface Roughness Of A Machined Surface In Glass Milling Operation Using Cbn Grinding Tool
inferred← citeshttps://doi.org/10.1002/mawe.201800028openalex-snapshot
Analysation of performances of CNC high speed milling machine using multi‐walled carbon nanotubes as additives in cutting fluid
inferred← citeshttps://doi.org/10.1007/978-3-030-31343-2_66openalex-snapshot
Sustainability Evaluation of Textile Warehouses from Social and Environmental Perspective
inferred← citeshttps://doi.org/10.1007/978-3-030-34544-0_18openalex-snapshot
Bio-Based Nano-Lubricants for Sustainable Manufacturing
inferred← citeshttps://doi.org/10.1007/978-3-030-95820-6_6openalex-snapshot
Influence of Cutting Fluid and Parameters on Machining and Cooling Techniques in Recent Technology
inferred← citeshttps://doi.org/10.1007/978-981-16-3330-0_2openalex-snapshot
Potential of Various Metal-Oxide Nanofluids for Sustainable Machining Application—A Review
inferred← citeshttps://doi.org/10.1007/978-981-95-0063-5_6openalex-snapshot
Nanofluid Applications in Minimum Quantity Lubrication: A Review of Machining Technique
inferred← citeshttps://doi.org/10.1007/978-981-97-3654-6_14openalex-snapshot
Investigations on the Effect of Applying Minimal Quantity Lubrication (MQL) Cooling for Surface Milling of Industrial Cast Iron Using Multi-Objective Optimization Technique
inferred← citeshttps://doi.org/10.1007/s00170-012-4527-zopenalex-snapshot
An investigation of optimum SiO2 nanolubrication parameters in end milling of aerospace Al6061-T6 alloy
inferred← citeshttps://doi.org/10.1007/s00170-013-5334-xopenalex-snapshot
Investigating the optimum molybdenum disulfide (MoS2) nanolubrication parameters in CNC milling of AL6061-T6 alloy
inferred← citeshttps://doi.org/10.1007/s00170-013-5340-zopenalex-snapshot
Morphology investigation of worn bearing surfaces using SiO2 nanolubrication system
inferred← citeshttps://doi.org/10.1007/s00170-013-5566-9openalex-snapshot
Development of SiO2 nanolubrication system to be used in sliding bearings
inferred← citeshttps://doi.org/10.1007/s00170-015-7381-yopenalex-snapshot
Experimental research on the influence of the jet parameters of minimum quantity lubrication on the lubricating property of Ni-based alloy grinding
inferred← citeshttps://doi.org/10.1007/s00170-016-8453-3openalex-snapshot
Performances of Al2O3/SiC hybrid nanofluids in minimum-quantity lubrication grinding
inferred← citeshttps://doi.org/10.1007/s00170-016-8588-2openalex-snapshot
Improved seizure resistance of ultra-high-strength steel ironed cups with a lubricant containing SiO2 nanoparticles
inferred← citeshttps://doi.org/10.1007/s00170-016-9324-7openalex-snapshot
Effect of the physical properties of different vegetable oil-based nanofluids on MQLC grinding temperature of Ni-based alloy
inferred← citeshttps://doi.org/10.1007/s00170-017-0836-6openalex-snapshot
Synthesis of butyl-octyl-diphenylamine as lubricant antioxidant additive by ionic liquids
inferred← citeshttps://doi.org/10.1007/s00170-018-1689-3openalex-snapshot
Comparative study on the performance of the MQL nanolubricant and conventional flood lubrication techniques during grinding of Si3N4 ceramic
inferred← citeshttps://doi.org/10.1007/s00170-018-1834-zopenalex-snapshot
Optimization of surface roughness on slitting knives by titanium dioxide nano particles as an additive in grinding lubricant
inferred← citeshttps://doi.org/10.1007/s00170-018-2576-7openalex-snapshot
MQL milling of TC4 alloy by dispersing graphene into vegetable oil-based cutting fluid
inferred← citeshttps://doi.org/10.1007/s00170-018-2611-8openalex-snapshot
Effects of the physicochemical properties of different nanoparticles on lubrication performance and experimental evaluation in the NMQL milling of Ti–6Al–4V
inferred← citeshttps://doi.org/10.1007/s00170-019-03466-yopenalex-snapshot
Analysis of the cooling performance of Ti–6Al–4V in minimum quantity lubricant milling with different nanoparticles
inferred← citeshttps://doi.org/10.1007/s00170-019-03814-yopenalex-snapshot
Influence of Al2O3 and palm oil–mixed nano-fluid on machining performances of Inconel-690: IF-THEN rules–based FIS model in eco-benign milling
inferred← citeshttps://doi.org/10.1007/s00170-020-06195-9openalex-snapshot
Flooded drilling of Inconel 718 using graphene incorporating cutting fluid
inferred← citeshttps://doi.org/10.1007/s00170-021-07316-8openalex-snapshot
A comprehensive review on the application of nanofluids in the machining process
inferred← citeshttps://doi.org/10.1007/s00170-023-11721-6openalex-snapshot
Minimum quantity lubrication machining nickel base alloy: a comprehensive review
inferred← citeshttps://doi.org/10.1007/s00170-025-16763-6openalex-snapshot
Evaluation of nano-MoS2-assisted MQL performances in end milling of AISI 316L austenitic stainless steel and multi-objective optimization via genetic algorithm
inferred← citeshttps://doi.org/10.1007/s00170-026-17645-1openalex-snapshot
Comparative study of the machining performance of parafin oil and soluble oil cutting fluids in the machining of AISI 304 steel
inferred← citeshttps://doi.org/10.1007/s11665-025-12293-0openalex-snapshot
Effect of Cutting Parameters and Cooling Conditions on Surface Roughness and Tool Wear in Turning Ti-6Al-4V Titanium Alloy on an All-Gear Lathe: A Full Factorial Experimental Study
inferred← citeshttps://doi.org/10.1007/s12008-023-01540-0openalex-snapshot
Multi-response optimization in face milling of EN-31 steel using analytical hierarchy process-based GRA
inferred← citeshttps://doi.org/10.1007/s13204-021-02140-8openalex-snapshot
Application of nanofluids as cutting fluids in machining operations: a brief review
inferred← citeshttps://doi.org/10.1007/s40032-022-00905-wopenalex-snapshot
A Review on Machining of Nickel-Based Superalloys Using Nanofluids Under Minimum Quantity Lubrication (NFMQL)
inferred← citeshttps://doi.org/10.1007/s40430-017-0839-0openalex-snapshot
Emerging application of nanoparticle-enriched cutting fluid in metal removal processes: a review
inferred← citeshttps://doi.org/10.1007/s40430-024-04676-6openalex-snapshot
A review on minimum quantity lubrication in machining of different alloys and superalloys using nanofluids
inferred← citeshttps://doi.org/10.1007/s40684-019-00158-6openalex-snapshot
Eco-Friendly Cutting Fluids in Minimum Quantity Lubrication Assisted Machining: A Review on the Perception of Sustainable Manufacturing
inferred← citeshttps://doi.org/10.1007/s40684-026-00857-xopenalex-snapshot
Green Sustainable Machining of X22CrMoV12-1 High-Strength Steel Under Different Cooling and Lubrication Process
inferred← citeshttps://doi.org/10.1007/s40997-017-0103-3openalex-snapshot
Thermal and Rheological Properties of Industrial Mineral Gear Oil and Paraffinic Oil/CNTs Nanolubricants
inferred← citeshttps://doi.org/10.1007/s42452-024-06398-9openalex-snapshot
Applicability of nano-cutting fluids for enhanced cooling, low tool wear, and high tribological performance during machining—a review
inferred← citeshttps://doi.org/10.1016/b978-0-443-13625-2.00015-2openalex-snapshot
SiO2-based nanofluids
inferred← citeshttps://doi.org/10.1016/j.cirp.2024.04.048openalex-snapshot
Study of the effect of oxygen level on tool wear in machining Ti-6Al-4V
inferred← citeshttps://doi.org/10.1016/j.cis.2020.102199openalex-snapshot
Application of conventional and hybrid nanofluids in different machining processes: A critical review
inferred← citeshttps://doi.org/10.1016/j.clet.2021.100104openalex-snapshot
An experimental investigation on the effect of Al2O3/ cutting oil based nano coolant for Minimum Quantity Lubrication drilling of SS 304
inferred← citeshttps://doi.org/10.1016/j.jclepro.2013.10.048openalex-snapshot
Morphology of surface generated by end milling AL6061-T6 using molybdenum disulfide (MoS2) nanolubrication in end milling machining
inferred← citeshttps://doi.org/10.1016/j.jclepro.2013.11.018openalex-snapshot
Investigating the Minimum Quantity Lubrication in grinding of Al2O3 engineering ceramic
inferred← citeshttps://doi.org/10.1016/j.jclepro.2013.11.058openalex-snapshot
Investigation on the morphology of the machined surface in end milling of aerospace AL6061-T6 for novel uses of SiO2 nanolubrication system
inferred← citeshttps://doi.org/10.1016/j.jclepro.2014.11.006openalex-snapshot
Fuzzy logic-based approach to investigate the novel uses of nano suspended lubrication in precise machining of aerospace AL tempered grade 6061
inferred← citeshttps://doi.org/10.1016/j.jclepro.2015.03.039openalex-snapshot
Application of sustainable techniques in metal cutting for enhanced machinability: a review
inferred← citeshttps://doi.org/10.1016/j.jclepro.2016.03.146openalex-snapshot
Effects of Minimum Quantity Lubrication (MQL) in machining processes using conventional and nanofluid based cutting fluids: A comprehensive review
inferred← citeshttps://doi.org/10.1016/j.jclepro.2020.120755openalex-snapshot
Synergistic effect of silica and pure palm oil on the machining performances of Inconel 690: A study for promoting minimum quantity nano doped-green lubricants
inferred← citeshttps://doi.org/10.1016/j.jclepro.2022.131486openalex-snapshot
Holistic sustainability assessment of novel oscillating-heat-pipe grinding-wheel in Earth-friendly abrasive machining
inferred← citeshttps://doi.org/10.1016/j.jmapro.2019.03.014openalex-snapshot
Effects of reinforced nanoparticles with surfactant on surface quality and chip formation morphology in MQL-turning of superalloys
inferred← citeshttps://doi.org/10.1016/j.jmapro.2019.03.024openalex-snapshot
Tribological performance of SiO2-based nanofluids in minimum quantity lubrication grinding of Si3N4 ceramic
inferred← citeshttps://doi.org/10.1016/j.jmapro.2019.12.042openalex-snapshot
Effects of cutting fluids with nano-silver and borax additives on milling performance of aluminium alloys
inferred← citeshttps://doi.org/10.1016/j.jmapro.2020.03.023openalex-snapshot
Axial rotating heat-pipe grinding wheel for eco–benign machining: A novel method for dry profile-grinding of Ti–6Al–4V alloy
inferred← citeshttps://doi.org/10.1016/j.jmapro.2020.05.027openalex-snapshot
Improvement of the milling process performance by using cutting fluids prepared with nano-silver and boric acid
inferred← citeshttps://doi.org/10.1016/j.jmapro.2020.11.044openalex-snapshot
Tribological Behaviors and Lubrication Mechanism of Water-based MoO3 Nanofluid during Cold Rolling Process
inferred← citeshttps://doi.org/10.1016/j.jmapro.2021.05.028openalex-snapshot
A review on nanofluids in minimum quantity lubrication machining
inferred← citeshttps://doi.org/10.1016/j.jmapro.2021.05.056openalex-snapshot
Recent advancements in nano-lubrication strategies for machining processes considering their health and environmental impacts
inferred← citeshttps://doi.org/10.1016/j.jmatprotec.2015.10.032openalex-snapshot
Increase in ironing limit of aluminium alloy cups with lubricants containing nanoparticles
inferred← citeshttps://doi.org/10.1016/j.jmatprotec.2020.116964openalex-snapshot
Oil mist concentration and machining characteristics of SiO2 water-based nano-lubricants in electrostatic minimum quantity lubrication-EMQL milling
inferred← citeshttps://doi.org/10.1016/j.jmbbm.2019.103529openalex-snapshot
Machinability of high-speed enamel cutting with carbide bur
inferred← citeshttps://doi.org/10.1016/j.jmrt.2021.07.161openalex-snapshot
Influence of graphene reinforced sunflower oil on thermo-physical, tribological and machining characteristics of inconel 718
inferred← citeshttps://doi.org/10.1016/j.matpr.2015.07.066openalex-snapshot
Improved Machining Performance with Nanoparticle Enriched Cutting Fluids under Minimum Quantity Lubrication (MQL) Technique: A Review
inferred← citeshttps://doi.org/10.1016/j.matpr.2015.07.331openalex-snapshot
Mechanism of Nanoparticles Functioning and Effects in Machining Processes: A Review
inferred← citeshttps://doi.org/10.1016/j.matpr.2019.07.571openalex-snapshot
A Brief Review on Effects of Conventional and Nano Particle Based Machining Fluid on Machining Performance of Minimum Quantity Lubrication Machining
inferred← citeshttps://doi.org/10.1016/j.matpr.2019.10.127openalex-snapshot
Investigations on effect of nanofluid based minimum quantity lubrication technique for surface milling of Al7075-T6 aerospace alloy
inferred← citeshttps://doi.org/10.1016/j.matpr.2021.02.501openalex-snapshot
Analysis of surface roughness and cutting force under MQL turning using nano fluids
inferred← citeshttps://doi.org/10.1016/j.matpr.2023.02.425openalex-snapshot
Effect of copper nano-cutting fluids in end milling of al 6061 and its influence on work piece morphology
inferred← citeshttps://doi.org/10.1016/j.measurement.2016.02.049openalex-snapshot
Optimization of cutting conditions for minimum residual stress, cutting force and surface roughness in end milling of S50C medium carbon steel
inferred← citeshttps://doi.org/10.1016/j.measurement.2018.05.011openalex-snapshot
Analysis of tool deflection errors in precision CNC end milling of aerospace Aluminum 6061-T6 alloy
inferred← citeshttps://doi.org/10.1016/j.mfglet.2015.04.001openalex-snapshot
Study of ionic liquid as effective additive for minimum quantity lubrication during titanium machining
inferred← citeshttps://doi.org/10.1016/j.molliq.2024.124551openalex-snapshot
Studies on newly developed hBN/graphene-based nano-fluids supported by cryogenic cooling conditions in improving the tribological performance of Ti6Al4V alloy
inferred← citeshttps://doi.org/10.1016/j.rser.2015.09.033openalex-snapshot
Rheological behaviour of nanofluids: A review
inferred← citeshttps://doi.org/10.1051/mfreview/2021011openalex-snapshot
MQL Machining with nano fluid: a review
inferred← citeshttps://doi.org/10.1063/5.0036206openalex-snapshot
A review on influence of nano-fluid MQL in machining processes
inferred← citeshttps://doi.org/10.1063/5.0153975openalex-snapshot
A review outlook of rheological behavior of nano-fluids for solar energy harvesting
inferred← citeshttps://doi.org/10.1063/5.0178653openalex-snapshot
Experimental evaluation of machining performance during turning of Hastelloy C276 using graphene nanofluids
inferred← citeshttps://doi.org/10.1063/5.0256932openalex-snapshot
A comprehensive review on the viability of minimum quantity lubrication technology for machining difficult-to-cut alloys
inferred← citeshttps://doi.org/10.1080/01932691.2014.945595openalex-snapshot
Rheological Behavior of Zinc-Oxide Nanolubricants
inferred← citeshttps://doi.org/10.1080/01932691.2020.1789470openalex-snapshot
The effect of MWCNTs/GNs hybrid addition on the tribological and rheological properties of lubricating engine oil
inferred← citeshttps://doi.org/10.1080/10426914.2014.973583openalex-snapshot
Progress of Nanofluid Application in Machining: A Review
inferred← citeshttps://doi.org/10.1080/10426914.2022.2032147openalex-snapshot
State of the art on sustainable manufacturing using mono/hybrid nano-cutting fluids with minimum quantity lubrication
inferred← citeshttps://doi.org/10.1080/10910344.2023.2194966openalex-snapshot
A review on sustainable alternatives for conventional cutting fluid applications for improved machinability
inferred← citeshttps://doi.org/10.1080/10910344.2023.2287655openalex-snapshot
Machining performance and sustainability analysis of Al 2 O 3 -CuO hybrid nanofluid MQL application for milling of Ti-6Al-4V
inferred← citeshttps://doi.org/10.1080/14484846.2019.1710019openalex-snapshot
A comparative study on the machining characteristics on turning AISI 52100 alloy steel in dry and microlubrication condition
inferred← citeshttps://doi.org/10.1080/17515831.2020.1838100openalex-snapshot
Effect of WS 2 particles in cutting fluid on tribological behaviour of Ti–6Al–4V and on its machining performance
inferred← citeshttps://doi.org/10.1088/1742-6596/1578/1/012182openalex-snapshot
Experimental Analysis of Milling Aluminum Alloy with Oil-Less Lubrication of Nano-Fluid
inferred← citeshttps://doi.org/10.1088/1742-6596/1744/2/022142openalex-snapshot
Experimental Evaluation of the Lubrication Performance of Milling Al7075 with Different Nano-fluids MQL
inferred← citeshttps://doi.org/10.1088/1742-6596/908/1/012077openalex-snapshot
A study of energy consumption in turning process using lubrication of nanoparticles enhanced coconut oil (NECO)
inferred← citeshttps://doi.org/10.1108/ilt-11-2017-0322openalex-snapshot
Sustainable machining. Modeling and optimization of temperature and surface roughness in the milling of AISI D2 steel
inferred← citeshttps://doi.org/10.1115/1.4033995openalex-snapshot
Experimental Results on Lamellar-Type Solid Lubricants in Enhancing Minimum Quantity Lubrication Machining
inferred← citeshttps://doi.org/10.1115/1.4062996openalex-snapshot
The Effect of Spherical Hybrid Silica–Molybdenum Disulfide on the Lubricating Characteristics of Castor Oil
inferred← citeshttps://doi.org/10.1177/09544089221110980openalex-snapshot
Influence of hexagonal boron nitride additive nanocutting fluid on the machining of AA6061-T6 alloy using minimum quality lubrication
inferred← citeshttps://doi.org/10.1177/1687814017710618openalex-snapshot
Performance of Al 2 O 3 nanofluids in minimum quantity lubrication in hard milling of 60Si 2 Mn steel using cemented carbide tools
inferred← citeshttps://doi.org/10.1186/s10033-024-01002-yopenalex-snapshot
Towards Sustainable Grinding of Difficult-to-Cut Alloys—A Holistic Review and Trends
inferred← citeshttps://doi.org/10.12913/22998624/85629openalex-snapshot
A Comparative Study of Face Milling of D2 Steel Using Al2O3 Based Nanofluid Minimum Quantity Lubrication and Minimum Quantity Lubrication
inferred← citeshttps://doi.org/10.18178/ijmerr.9.8.1104-1109openalex-snapshot
Effect of Cutting Parameters on Cutting Force of Hard Milling of SKD 61 Steel under Nanofluid-MQL Condition
inferred← citeshttps://doi.org/10.18280/acsm.430104openalex-snapshot
Thermal Conductivity Enhancement by Al2O3@Cu, core@shell Nanoparticle Suspensions in Nanofluid Coolant
inferred← citeshttps://doi.org/10.21062/ujep/x.2015/a/1213-2489/mt/15/4/502openalex-snapshot
Nanoadditives SiO2 and TiO2 in Process Fluids
inferred← citeshttps://doi.org/10.21595/jme.2021.22186openalex-snapshot
Experimental analysis of cutting force during machining difficult to cut materials under dry, mineral oil, and TiO2 nano-lubricant
inferred← citeshttps://doi.org/10.2174/2405461507666220630153637openalex-snapshot
A Review on Nanofluids: Synthesis, Stability, and Uses in the Manufacturing Industry
inferred← citeshttps://doi.org/10.23860/thesis-gerdes-christoph-2017openalex-snapshot
Development of a Practical Method for Sustainable Routing in Manufacturing Enterprises
inferred← citeshttps://doi.org/10.26634/jfet.13.1.13761openalex-snapshot
The Effectiveness Of Various Cutting Fluids On The Surface Roughness Of Aisi 1045 Steel During Turning Operation Using Minimum Quantity Lubrication System
inferred← citeshttps://doi.org/10.30678/fjt.85312openalex-snapshot
Tribological behavior of the boric acid and titanium dioxide based nanofluid in machining of EN24 steel
inferred← citeshttps://doi.org/10.3390/instruments3030041openalex-snapshot
Design and Validation of A Modular Instrument to Measure Torque and Energy Consumption in Industrial Operations
inferred← citeshttps://doi.org/10.3390/lubricants10100266openalex-snapshot
Role of Nanofluid Minimum Quantity Lubrication (NMQL) in Machining Application
inferred← citeshttps://doi.org/10.3390/lubricants11020064openalex-snapshot
State-of-the-Art in Sustainable Machining of Different Materials Using Nano Minimum Quality Lubrication (NMQL)
inferred← citeshttps://doi.org/10.3390/math10173201openalex-snapshot
Analysis of Jet Wall Flow and Heat Transfer Conveying ZnO-SAE50 Nano Lubricants Saturated in Darcy-Brinkman Porous Medium
inferred← citeshttps://doi.org/10.3390/met12091466openalex-snapshot
Green Metalworking Fluids for Sustainable Machining Operations and Other Sustainable Systems: A Review
inferred← citeshttps://doi.org/10.3390/nano12234214openalex-snapshot
Application of Nanofluids for Machining Processes: A Comprehensive Review
inferred← citeshttps://doi.org/10.3989/loquens.2016.031openalex-snapshot
Relación entre la percepción y la producción de las vocales del portugués brasileño por parte de monolingues de español europeo
inferred← citeshttps://doi.org/10.4018/ijmmme.2021070105openalex-snapshot
Turning SKD 11 Steel Using Silver Nanofluids With Minimum Quantity Lubrication
inferred← citeshttps://doi.org/10.4028/www.scientific.net/amr.1119.617openalex-snapshot
Investigation into Effect of Cutting Conditions on Surface Roughness while Dry Machining Al-11%Si and Al-11%Si-1% Bi Die Casting Alloy
inferred← citeshttps://doi.org/10.4028/www.scientific.net/amr.748.264openalex-snapshot
Investigate the Lubrication Effects on Cutting Force and Power Consumption in Up and Down End Milling
inferred← citeshttps://doi.org/10.4236/wjet.2017.52023openalex-snapshot
Research on Applying Nano Cutting Oils in Spur Gear Hobbing Process
inferred← citeshttps://doi.org/10.46593/ijaera.2019.v05i01.002openalex-snapshot
Optimize Multiple Responses For Slide Milling Process Using Nanofluid By Taguchi Method Based on GRA Theory
inferred← citeshttps://doi.org/10.47480/isibted.1757702openalex-snapshot
Experimental investigation of effects of nano-fluid usage on cooling in machining
inferred← citeshttps://doi.org/10.52209/2706-977x_2025_1_65openalex-snapshot
Multi-Objective Optimization of Machining Parameters for Sustainable Turning of AISI 630 Stainless Steel using Taguchi-Based Desirability Function Analysis
inferred← citeshttps://doi.org/10.5937/jaes18-27335openalex-snapshot
An empirical investigation of SIO2 nano concentration under MQL on surface roughness in hard milling of jis SKD61 steel
Editorial review for independent work. ICSAC — the Institute for Complexity
Science and Advanced Computing — runs a structured editorial panel for researchers
publishing outside journals, and publishes on CiteStamp rails. Submission is free
and goes through ORCID: icsacinstitute.org/submit.