On the public citation graph

Occurrence of surface defects on strips during hot rolling process by FEM

https://doi.org/10.1007/s00170-012-4556-7
0 signed · 57 inferred · view as graph

Inferred edges come from two machine sources: sweeps of open repository metadata (mostly SSRN and Zenodo), and a bulk OpenAlex citation snapshot. Every row below is labelled with the one it came from. Neither is a complete citation index — absence here is not evidence of absence.

Is this your work? Sign in with ORCID and put your name on the claims that are yours.
Claim with ORCID
Reference health. See whether every reference in this work resolves to a known work and none has been retracted — and get a dated CiteStamped badge you can embed.
See reference health

What this work says

Outgoing claims: the papers this work cites, builds on, or argues with.

inferredcites →https://doi.org/10.1007/s11668-008-9194-xopenalex-snapshot
Split Ends and Cracking Problem During Hot Rolling of Continuously Cast Steel Billets
inferredcites →https://doi.org/10.1007/s12289-010-1003-xopenalex-snapshot
Modelling the correlation between the geometrical features and the forming limit strains of perforated Al 8011 sheets using artificial neural network
inferredcites →https://doi.org/10.1016/j.commatsci.2007.09.009openalex-snapshot
Neural network analysis of the influence of chemical composition on surface cracking during hot rolling of AISI D2 tool steel
inferredcites →https://doi.org/10.1016/j.commatsci.2009.09.008openalex-snapshot
Simulation of central crack closing behavior during ultra-heavy plate rolling
inferredcites →https://doi.org/10.1016/j.engfracmech.2010.08.017openalex-snapshot
Modelling of damage and failure in multiphase high strength DP and TRIP steels
inferredcites →https://doi.org/10.1016/j.jmatprotec.2007.11.129openalex-snapshot
Deformation behavior of the surface defects of low carbon steel in wire rod rolling
inferredcites →https://doi.org/10.1016/j.jmatprotec.2007.11.167openalex-snapshot
Plastic work approach for surface defect prediction in the hot bar rolling process
inferredcites →https://doi.org/10.1016/j.jmatprotec.2008.06.045openalex-snapshot
Research on the behavior of transversal crack in slab V–H rolling process by FEM
inferredcites →https://doi.org/10.1016/j.jmatprotec.2011.03.018openalex-snapshot
Effect of strain rate on the forming behaviour of sheet metals
inferredcites →https://doi.org/10.1016/j.nucengdes.2011.03.019openalex-snapshot
Critical strains and necking phenomena for different steel sheet specimens under uniaxial loading
inferredcites →https://doi.org/10.1016/j.triboint.2011.03.029openalex-snapshot
Analysis of friction and surface roughness effects on edge crack evolution of thin strip during cold rolling
inferredcites →https://doi.org/10.1016/s0924-0136(99)00090-4openalex-snapshot
Behaviour of longitudinal surface cracks in the hot rolling of steel slabs
inferredcites →https://doi.org/10.1016/s0924-0136(99)00481-1openalex-snapshot
Transversal cracks and their behaviour in the hot rolling of steel slabs
inferredcites →https://doi.org/10.1016/s1006-706x(09)60005-4openalex-snapshot
Influence of Edge Rolling Reduction on Plate-Edge Stress Distribution During Finish Rolling
inferredcites →https://doi.org/10.1063/1.3457536openalex-snapshot
Study on edge crack propagation during cold rolling of thin strip by FEM
inferredcites →https://doi.org/10.1080/10426910902746895openalex-snapshot
Thermal-Mechanical Finite Element Analysis of Evolution of Surface Cracks During Slab Rolling
inferredcites →https://doi.org/10.1115/1.1645877openalex-snapshot
A Computational and Experimental Study of Cold Rolling of Aluminum Alloys With Edge Cracking
inferredcites →https://doi.org/10.1142/s0217979208050668openalex-snapshot
FE SIMULATION OF EDGE CRACK INITIATION AND PROPAGATION OF CONVENTIONAL GRAIN ORIENTATION ELECTRICAL STEEL
inferredcites →https://doi.org/10.2320/jinstmet.72.832openalex-snapshot
Effects of Hot Rolling Conditions on the Fatigue Limit of Ti Added Dual Phase Hot-Rolled Steel Sheets
inferredcites →https://doi.org/10.2355/tetsutohagane1955.91.12_861openalex-snapshot
Influence of Rolling Condition on Deformation of Surface Micro-defect in Plate Rolling
inferredcites →https://doi.org/10.2355/tetsutohagane1955.92.11_661openalex-snapshot
Deformation Analysis of Longitudinal Surface Micro-defects in Flat Rolling
inferredcites →https://doi.org/10.3724/sp.j.1037.2010.00194openalex-snapshot
PROGRESS AND APPLICATION OF PLASTIC FINITE ELEMENT METHOD IN METALS ROLLING PROCESS
inferredcites →https://doi.org/10.4028/www.scientific.net/msf.505-507.1291openalex-snapshot
Modelling of the Development of Initial Crack under Hot Rolling Condition

What points at this work

Incoming claims: where this work appears in other papers’ reference lists and arguments.

inferred← citeshttps://doi.org/10.2139/ssrn.4121951openalex-extracted
A Review and Benchmark on State-of-The-Art Steel Defects Detection
inferred← citeshttps://doi.org/10.1002/adem.201500369openalex-snapshot
Special Rolling Techniques for Improvement of Mechanical Properties of Ultrafine‐Grained Metal Sheets: a Review
inferred← citeshttps://doi.org/10.1007/s00170-013-5387-xopenalex-snapshot
New method for forming shaft having thread and spline by rolling with round dies
inferred← citeshttps://doi.org/10.1007/s00170-013-5512-xopenalex-snapshot
An innovative development of a four-high foil rolling mill
inferred← citeshttps://doi.org/10.1007/s00170-014-6234-4openalex-snapshot
Investigation of closure of internal cracks during rolling by FE model considering crack surface roughness
inferred← citeshttps://doi.org/10.1007/s00170-016-8419-5openalex-snapshot
Slab analysis of asymmetrical clad sheet bonded before rolling process
inferred← citeshttps://doi.org/10.1007/s00170-016-8602-8openalex-snapshot
CVC cyclical shifting mode and its working characteristics for the mills of CSP
inferred← citeshttps://doi.org/10.1007/s00170-016-9587-zopenalex-snapshot
Improvement in continuously variable crown work roll contour under CVC cyclical shifting mode
inferred← citeshttps://doi.org/10.1007/s00170-018-2838-4openalex-snapshot
Analysis of flatness control capability based on the effect function and roll contour optimization for 6-h CVC cold rolling mill
inferred← citeshttps://doi.org/10.1007/s00170-025-16539-yopenalex-snapshot
Steel surface defects analysis with machine vision and deep learning
inferred← citeshttps://doi.org/10.1007/s10845-020-01710-xopenalex-snapshot
Synthetic data augmentation for surface defect detection and classification using deep learning
inferred← citeshttps://doi.org/10.1007/s11661-013-2049-4openalex-snapshot
Crack Healing in a Low-Carbon Steel Under Hot Plastic Deformation
inferred← citeshttps://doi.org/10.1007/s42979-023-02436-2openalex-snapshot
A Review and Benchmark on State-of-the-Art Steel Defects Detection
inferred← citeshttps://doi.org/10.1016/b978-0-12-819726-4.00010-7openalex-snapshot
Rolling Forming of Multi-Scaled Metallic Foils and Sheets
inferred← citeshttps://doi.org/10.1016/b978-0-323-99203-9.00010-7openalex-snapshot
Rolling
inferred← citeshttps://doi.org/10.1016/j.engfailanal.2020.105205openalex-snapshot
Root cause analysis of an unexpected brittle failure in a carbon steel slab
inferred← citeshttps://doi.org/10.1016/j.msea.2014.12.059openalex-snapshot
A study of the development of micro-cracks in surface/near surface of aluminum–manganese alloys during hot rolling
inferred← citeshttps://doi.org/10.1038/srep02373openalex-snapshot
Fabrication of ultra-thin nanostructured bimetallic foils by Accumulative Roll Bonding and Asymmetric Rolling
inferred← citeshttps://doi.org/10.1080/02670836.2018.1475862openalex-snapshot
Amelioration of surface cracking during hot rolling of AISI D2 tool steel
inferred← citeshttps://doi.org/10.1088/1361-6501/adfc88openalex-snapshot
DSP-YOLO: an improved YOLO11-based method for steel surface defect detection
inferred← citeshttps://doi.org/10.1108/ec-05-2017-0164openalex-snapshot
Experimental and numerical studies on flow behavior of surface defects in the heavy rail rolling
inferred← citeshttps://doi.org/10.1177/03019233241278148openalex-snapshot
Effect of hot rolling reduction process on macro-inclusion in high silicon steel plates: A numerical study
inferred← citeshttps://doi.org/10.1177/1687814017720879openalex-snapshot
Three-dimensional metal particle flow simulation during the whole rolling process for 60 kg/m heavy rail
inferred← citeshttps://doi.org/10.1177/1687814017728837openalex-snapshot
An analytical model of plate rolling force with a simple available velocity field and equal perimeter yield criterion
inferred← citeshttps://doi.org/10.1177/1687814017748236openalex-snapshot
Flatness evolution of cold-rolled high-strength steel strips during quenching process
inferred← citeshttps://doi.org/10.1177/1687814019840471openalex-snapshot
Effect of strip edge temperature drop of electrical steel on profile and flatness during hot rolling process
inferred← citeshttps://doi.org/10.1371/journal.pone.0101907openalex-snapshot
Analysis of Internal Crack Healing Mechanism under Rolling Deformation
inferred← citeshttps://doi.org/10.3390/ma15228094openalex-snapshot
Overview of Electricity Transmission Conductors: Challenges and Remedies
inferred← citeshttps://doi.org/10.3390/ma16186260openalex-snapshot
Study on Rolling Defects of Al-Mg Alloys with High Mg Content in Normal Rolling and Cross-Rolling Processes
inferred← citeshttps://doi.org/10.3390/met11040549openalex-snapshot
Recognition of Scratches and Abrasions on Metal Surfaces Using a Classifier Based on a Convolutional Neural Network
inferred← citeshttps://doi.org/10.3390/met11060870openalex-snapshot
A Multi-Branch U-Net for Steel Surface Defect Type and Severity Segmentation
inferred← citeshttps://doi.org/10.3390/met13020218openalex-snapshot
Numerical Simulation and Deformation Behavior of a Ti/Steel Clad Plate during the Rolling Process
inferred← citeshttps://doi.org/10.3390/met9070801openalex-snapshot
Root Cause Analysis of Surface Cracks in Heavy Steel Plates during the Hot Rolling Process
inferred← citeshttps://doi.org/10.9773/sosei.55.678openalex-snapshot
Rolling
Editorial review for independent work. ICSAC — the Institute for Complexity Science and Advanced Computing — runs a structured editorial panel for researchers publishing outside journals, and publishes on CiteStamp rails. Submission is free and goes through ORCID: icsacinstitute.org/submit.