On the public citation graph
Optimization and fabrication of curvilinear micro-grooved cutting tools for sustainable machining based on finite element modelling of the cutting process
0 signed · 49 inferred · view as graph
Inferred edges come from two machine sources: sweeps of open repository metadata (mostly SSRN and Zenodo), and a bulk OpenAlex citation snapshot. Every row below is labelled with the one it came from. Neither is a complete citation index — absence here is not evidence of absence.
Is this your work? Sign in with ORCID and put your name on the
claims that are yours.
Reference health. See whether every reference in this work resolves to a
known work and none has been retracted — and get a dated CiteStamped
badge you can embed.
What this work says
Outgoing claims: the papers this work cites, builds on, or argues with.
inferredcites →https://doi.org/10.1007/s00170-014-6747-xopenalex-snapshot
Finite element modeling of hard turning process via a micro-textured tool
inferredcites →https://doi.org/10.1007/s00170-015-7544-xopenalex-snapshot
Surface textures on cemented carbide cutting tools by micro EDM assisted with high-frequency vibration
inferredcites →https://doi.org/10.1007/s00170-018-2054-2openalex-snapshot
Analysis of tool-chip interface characteristics of self-lubricating tools with nanotextures and WS2/Zr coatings in dry cutting
inferredcites →https://doi.org/10.1007/s12206-018-0313-7openalex-snapshot
Effects of extreme pressure and anti-wear additives on surface topography and tool wear during MQCL turning of AISI 1045 steel
inferredcites →https://doi.org/10.1007/s12541-012-0242-9openalex-snapshot
Micro-grinding of micro-groove array on tool rake surface for dry cutting of titanium alloy
inferredcites →https://doi.org/10.1007/s40684-019-00158-6openalex-snapshot
Eco-Friendly Cutting Fluids in Minimum Quantity Lubrication Assisted Machining: A Review on the Perception of Sustainable Manufacturing
inferredcites →https://doi.org/10.1016/j.apsusc.2014.11.059openalex-snapshot
Effect of microscale texture on cutting performance of WC/Co-based TiAlN coated tools under different lubrication conditions
inferredcites →https://doi.org/10.1016/j.cirp.2011.03.104openalex-snapshot
Performance of electrical discharge textured cutting tools
inferredcites →https://doi.org/10.1016/j.ijmecsci.2019.03.016openalex-snapshot
3D FEM simulation of the turning process of stainless steel 17-4PH with differently texturized cutting tools
inferredcites →https://doi.org/10.1016/j.ijrmhm.2013.10.019openalex-snapshot
Cutting performance and wear mechanism of nanoscale and microscale textured Al2O3/TiC ceramic tools in dry cutting of hardened steel
inferredcites →https://doi.org/10.1016/j.ijrmhm.2013.12.015openalex-snapshot
Effect of femtosecond laser pretreatment on wear resistance of Al2O3/TiC ceramic tools in dry cutting
inferredcites →https://doi.org/10.1016/j.ijrmhm.2015.07.027openalex-snapshot
Effect of micro-textured tools on machining of Ti–6Al–4V alloy: An experimental and numerical approach
inferredcites →https://doi.org/10.1016/j.jclepro.2012.10.015openalex-snapshot
Modelling of direct energy requirements in mechanical machining processes
inferredcites →https://doi.org/10.1016/j.jclepro.2014.05.099openalex-snapshot
Empirical models for specific energy consumption and optimization of cutting parameters for minimizing energy consumption during turning
inferredcites →https://doi.org/10.1016/j.jclepro.2015.03.039openalex-snapshot
Application of sustainable techniques in metal cutting for enhanced machinability: a review
inferredcites →https://doi.org/10.1016/j.jclepro.2016.04.071openalex-snapshot
Proper selection of cutting parameters and cutting tool angle to lower the specific cutting energy during high speed machining of 7050-T7451 aluminum alloy
inferredcites →https://doi.org/10.1016/j.jclepro.2017.08.020openalex-snapshot
Determinants and implications of citizens’ environmental complaint in China: Integrating theory of planned behavior and norm activation model
inferredcites →https://doi.org/10.1016/j.jclepro.2017.08.022openalex-snapshot
Optimization of process parameters for minimum energy consumption based on cutting specific energy consumption
inferredcites →https://doi.org/10.1016/j.jclepro.2018.10.334openalex-snapshot
Multi-objective optimization and life cycle assessment of eco-friendly cryogenic N2 assisted turning of Ti-6Al-4V
inferredcites →https://doi.org/10.1016/j.jmatprotec.2014.07.032openalex-snapshot
Study on micro texturing of uncoated cemented carbide cutting tools for wear improvement and built-up edge stabilisation
inferredcites →https://doi.org/10.1016/j.jmatprotec.2018.04.049openalex-snapshot
Cutting performance of textured polycrystalline diamond tools with composite lyophilic/lyophobic wettabilities
inferredcites →https://doi.org/10.1016/j.jmatprotec.2018.05.032openalex-snapshot
Influence of dimple and spot-texturing of HSS cutting tool on machining of Ti-6Al-4V
inferredcites →https://doi.org/10.1016/j.precisioneng.2008.07.005openalex-snapshot
Development of cutting tools with microscale and nanoscale textures to improve frictional behavior
inferredcites →https://doi.org/10.1016/j.precisioneng.2016.09.005openalex-snapshot
Development and machining performance of a textured diamond cutting tool fabricated with a focused ion beam and heat treatment
inferredcites →https://doi.org/10.1016/j.surfcoat.2017.01.118openalex-snapshot
Performance of laser surface textured high speed steel cutting tool in machining of Al7075-T6 aerospace alloy
inferredcites →https://doi.org/10.1016/j.surfcoat.2017.11.061openalex-snapshot
Characterization and machining performance of laser-textured chevron shaped tools coated with AlTiN and AlCrN coatings
inferredcites →https://doi.org/10.1016/j.triboint.2014.06.017openalex-snapshot
Tribological behaviour and tool wear analyses in rough turning of large-scale parts of nuclear power plants using grooved coated insert
inferredcites →https://doi.org/10.1016/j.wear.2014.02.005openalex-snapshot
Experimental and numerical analyses of the tool wear in rough turning of large dimensions components of nuclear power plants
inferredcites →https://doi.org/10.1016/s0890-6955(01)00119-5openalex-snapshot
Investigations on hard turning with minimal cutting fluid application (HTMF) and its comparison with dry and wet turning
inferredcites →https://doi.org/10.1016/s0890-6955(99)00051-6openalex-snapshot
Determination of workpiece flow stress and friction at the chip–tool contact for high-speed cutting
inferredcites →https://doi.org/10.1115/1.4045554openalex-snapshot
Effect of Micro-Textured Tool Parameters on Forces, Stresses, Wear Rate, and Variable Friction in Titanium Alloy Machining
inferredcites →https://doi.org/10.1115/1.4047142openalex-snapshot
A Comparison of Weldability, Structure, and Mechanical Properties of CM64 and Tribaloy T-800 Welds for Hard-Facing of Turbine Blades
What points at this work
Incoming claims: where this work appears in other papers’ reference lists and arguments.
inferred← citeshttps://doi.org/10.2139/ssrn.4682291openalex-extracted
Research on Cutting Energy Consumption Model of Micro-Texture Tools
inferred← citeshttps://doi.org/10.1007/s00170-020-06514-0openalex-snapshot
Effect of microstructure on high-speed cutting modified anti-fatigue performance of Incoloy A286 and titanium alloy TC17
inferred← citeshttps://doi.org/10.1007/s11831-022-09794-9openalex-snapshot
A State of the Art on Simulation and Modelling Methods in Machining: Future Prospects and Challenges
inferred← citeshttps://doi.org/10.1007/s40436-022-00432-yopenalex-snapshot
Coupling effect of micro-textured tools and cooling conditions on the turning performance of aluminum alloy 6061
inferred← citeshttps://doi.org/10.1016/j.aei.2026.105089openalex-snapshot
A synergistic framework combining explainable AI and multiphysical simulation for uncovering process–structure relationships in mask electrolyte jet machining
inferred← citeshttps://doi.org/10.1016/j.cirp.2021.05.006openalex-snapshot
Structured and textured cutting tool surfaces for machining applications
inferred← citeshttps://doi.org/10.1016/j.cirpj.2022.07.008openalex-snapshot
Influence of texture parameters of the bio-inspired crescent textured tool on machining performance of martensitic stainless steel
inferred← citeshttps://doi.org/10.1016/j.eswa.2023.122876openalex-snapshot
On developing a green and intelligent manufacturing system
inferred← citeshttps://doi.org/10.1016/j.jmapro.2021.11.049openalex-snapshot
Experimental evaluation of surface generation and force time-varying characteristics of curvilinear grooved micro end mills fabricated by EDM
inferred← citeshttps://doi.org/10.1016/j.msea.2025.149220openalex-snapshot
Microstructure and mechanical characteristics of the quenching and tempering surface layer of ultra-high-strength steels subjected to orthogonal turning process
inferred← citeshttps://doi.org/10.1051/smdo/2021043openalex-snapshot
Numerical investigation of dimple-texturing on the turning performance of hardened AISI H-13 steel
inferred← citeshttps://doi.org/10.1080/23311916.2024.2375427openalex-snapshot
Modelling and optimization based on RSM in dry turning parameters of AISI H13 steel using novel hybrid design texture tool
inferred← citeshttps://doi.org/10.1080/2374068x.2024.2402969openalex-snapshot
Comparison of machining forces, power consumption, and specific cutting energy in tools with grooved cutting edges for sustainable manufacturing
inferred← citeshttps://doi.org/10.1080/2374068x.2025.2559957openalex-snapshot
Comprehensive review of the micro-texture in turning applications: current state and recent advancements
inferred← citeshttps://doi.org/10.1115/1.4070142openalex-snapshot
Spatially-Informed Online Prediction of Milling Surface Deformation Using Multiphysics-Infused Graph Neural Network for Digital Twinning
inferred← citeshttps://doi.org/10.3390/lubricants11110470openalex-snapshot
An Experimental Study on Ultrasonic Vibration-Assisted Turning of Aluminum Alloy 6061 with Vegetable Oil-Based Nanofluid Minimum Quantity Lubrication
inferred← citeshttps://doi.org/10.3390/su13105617openalex-snapshot
Bibliometric Analysis of Specific Energy Consumption (SEC) in Machining Operations: A Sustainable Response
Editorial review for independent work. ICSAC — the Institute for Complexity
Science and Advanced Computing — runs a structured editorial panel for researchers
publishing outside journals, and publishes on CiteStamp rails. Submission is free
and goes through ORCID: icsacinstitute.org/submit.