On the public citation graph

Effects of raster angle on tensile and surface roughness properties of various FDM filaments

https://doi.org/10.1007/s12206-021-0708-8
0 signed · 105 inferred · view as graph

Inferred edges come from two machine sources: sweeps of open repository metadata (mostly SSRN and Zenodo), and a bulk OpenAlex citation snapshot. Every row below is labelled with the one it came from. Neither is a complete citation index — absence here is not evidence of absence.

Is this your work? Sign in with ORCID and put your name on the claims that are yours.
Claim with ORCID
Reference health. See whether every reference in this work resolves to a known work and none has been retracted — and get a dated CiteStamped badge you can embed.
See reference health

What this work says

Outgoing claims: the papers this work cites, builds on, or argues with.

inferredcites →https://doi.org/10.1007/s12206-019-1011-9openalex-snapshot
3D printed polycarbonate reinforced acrylonitrile–butadiene–styrene composites: Composition effects on mechanical properties, micro-structure and void formation study
inferredcites →https://doi.org/10.1016/j.addma.2017.12.002openalex-snapshot
Mechanical characterization of 3D-printed polymers
inferredcites →https://doi.org/10.1016/j.addma.2018.10.028openalex-snapshot
Invited review article: Where and how 3D printing is used in teaching and education
inferredcites →https://doi.org/10.1016/j.apsusc.2018.01.257openalex-snapshot
Enhanced mechanical properties of self-polymerized polydopamine-coated recycled PLA filament used in 3D printing
inferredcites →https://doi.org/10.1016/j.joms.2020.04.040openalex-snapshot
3D Printing of Face Shields During COVID-19 Pandemic: A Technical Note
inferredcites →https://doi.org/10.1016/j.matdes.2019.107684openalex-snapshot
Method of enhancing interlayer bond strength in construction scale 3D printing with mortar by effective bond area amplification
inferredcites →https://doi.org/10.1016/j.polymertesting.2018.05.020openalex-snapshot
FDM process parameters influence over the mechanical properties of polymer specimens: A review
inferredcites →https://doi.org/10.1016/j.procir.2019.02.030openalex-snapshot
A comparison between mechanical properties of specimens 3D printed with virgin and recycled PLA
inferredcites →https://doi.org/10.1080/10426910008912976openalex-snapshot
Effect of Layer Orientation on Mechanical Properties of Rapid Prototyped Samples
inferredcites →https://doi.org/10.1108/rpj-08-2015-0115openalex-snapshot
Tensile strength of partially filled FFF printed parts: experimental results
inferredcites →https://doi.org/10.1108/rpj-09-2014-0135openalex-snapshot
The impact of process parameters on mechanical properties of parts fabricated in PLA with an open-source 3-D printer
inferredcites →https://doi.org/10.1108/rpj-10-2012-0091openalex-snapshot
Experimental investigation of FDM process for improvement of mechanical properties and production cost
inferredcites →https://doi.org/10.1115/imece2014-39379openalex-snapshot
Material Property Testing of 3D-Printed Specimen in PLA on an Entry-Level 3D Printer
inferredcites →https://doi.org/10.1115/imece2015-52634openalex-snapshot
Experimental Study of Mechanical Properties of Additively Manufactured ABS Plastic as a Function of Layer Parameters
inferredcites →https://doi.org/10.3403/30377399openalex-snapshot
Plastics � Determination of tensile properties
inferredcites →https://doi.org/10.5041/rmmj.10343openalex-snapshot
Printing the Future—Updates in 3D Printing for Surgical Applications
inferredcites →https://doi.org/10.5041/rmmj.10350openalex-snapshot
Effect of Socioeconomic Status and Ethnicity on Glycemic Control in Arab and Jewish Youth with Type 1 Diabetes Mellitus

What points at this work

Incoming claims: where this work appears in other papers’ reference lists and arguments.

inferred← citeshttps://doi.org/10.2139/ssrn.4493959openalex-extracted
A Review on Fused Deposition Modelling Materials with Analysis of Key Process Parameters Influence on Mechanical Properties
inferred← citeshttps://doi.org/10.1002/app.54463openalex-snapshot
Stress relaxation of 3D printed PLA of various infill orientations under tensile and bending loadings
inferred← citeshttps://doi.org/10.1002/app.55262openalex-snapshot
Effect of raster angle on the fracture properties of additively manufactured ABS via essential work of fracture
inferred← citeshttps://doi.org/10.1002/app.58043openalex-snapshot
Machine Learning Insights Into the Mechanical Behavior of Fused Filament Fabricated Polylactic Acid Composites Reinforced With Carbon Fiber, Graphene, and Multi‐Walled Carbon Nano Tubes
inferred← citeshttps://doi.org/10.1002/pat.6642openalex-snapshot
The Torsional Characterization of 3D ‐Printed Polylactic Acid Parts With Alternating Additive Manufacturing Parameters
inferred← citeshttps://doi.org/10.1002/pc.26937openalex-snapshot
3D printing of glass fiber reinforced acrylonitrile butadiene styrene and investigation of tensile, flexural, warpage and roughness properties
inferred← citeshttps://doi.org/10.1002/pen.27123openalex-snapshot
Development of sustainable polymer composite with agro‐industrial residue for biomedical applications
inferred← citeshttps://doi.org/10.1007/978-3-031-32927-2_5openalex-snapshot
Effects of Build Orientation and Raster Angle on Surface Roughness and Mechanical Strength of FDM Printed ABS
inferred← citeshttps://doi.org/10.1007/978-3-031-94889-3_11openalex-snapshot
Taguchi Optimization of FDM Process Parameters on Ultimate Tensile Strength of 3D-Printed PLA Parts
inferred← citeshttps://doi.org/10.1007/s00170-023-11468-0openalex-snapshot
Experimental investigation of parameters in fused filament fabrication 3D printing process of ABS plus using response surface methodology
inferred← citeshttps://doi.org/10.1007/s00170-023-12823-xopenalex-snapshot
A review on fused deposition modeling materials with analysis of key process parameters influence on mechanical properties
inferred← citeshttps://doi.org/10.1007/s00170-024-13037-5openalex-snapshot
Processing and modeling of 3D-printed mill scale strengthened acrylonitrile butadiene styrene composites
inferred← citeshttps://doi.org/10.1007/s00170-024-13403-3openalex-snapshot
Analysis of mesostructural characteristics and their influence on tensile strength of ABS specimens manufactured through fused deposition modeling
inferred← citeshttps://doi.org/10.1007/s00170-025-15669-7openalex-snapshot
Comparative analysis of single-objective and multi-objective optimization of mechanical properties in annealed and non-annealed 3D-printed parts: impact of strain rates and raster angles
inferred← citeshttps://doi.org/10.1007/s00170-025-16232-0openalex-snapshot
A machine learning–integrated framework for mechanical property prediction of FDM–printed PLA
inferred← citeshttps://doi.org/10.1007/s00170-026-17583-yopenalex-snapshot
Physics-informed multi-objective optimization of fused deposition modeling
inferred← citeshttps://doi.org/10.1007/s00170-026-18618-0openalex-snapshot
Effect of raster angle on the mechanical properties and fracture mechanisms of material extrusion samples: Multiscale analyzes
inferred← citeshttps://doi.org/10.1007/s10904-025-03733-4openalex-snapshot
Development and Characterization of Novel PLA/Henna Biocomposites for Sustainable Additive Manufacturing
inferred← citeshttps://doi.org/10.1007/s11665-023-08813-5openalex-snapshot
Effect of Infill Line Direction on Tensile and Flexural Properties of Poly(Lactic Acid) Samples during 3D Printing
inferred← citeshttps://doi.org/10.1007/s11665-025-12387-9openalex-snapshot
Assessing the Effects of DMLS Processing Conditions on the Properties of AlSi10Mg: An Experimental and Modeling Approach
inferred← citeshttps://doi.org/10.1007/s12008-025-02463-8openalex-snapshot
Influence of Raster Angle and Post-Processing Via Hot Pressing on the Mechanical Performance of Fused Filament Fabricated Polylactic Acid (PLA) Components
inferred← citeshttps://doi.org/10.1007/s12206-022-2102-6openalex-snapshot
The influence of dog-bone shaped specimen geometry on tensile test results of fused filament fabricated Nylon 12
inferred← citeshttps://doi.org/10.1007/s12206-023-0113-6openalex-snapshot
Printing parameter optimization of PLA material concerning geometrical accuracy and tensile properties relative to FDM process productivity
inferred← citeshttps://doi.org/10.1007/s12206-023-0834-6openalex-snapshot
Nano metal oxide (CuO/Co3O4) based feed stock filament for FDM
inferred← citeshttps://doi.org/10.1007/s12221-026-01428-2openalex-snapshot
Evaluation of the Effect of Raster Angle on the Fracture Properties of 3D Printed Polycarbonate Using the Essential Work of Fracture Method
inferred← citeshttps://doi.org/10.1007/s13369-025-10341-4openalex-snapshot
Impact of Epoxy Infill on the Mechanical Strength of ABS Specimens Produced by Fused Filament Fabrication
inferred← citeshttps://doi.org/10.1007/s13726-024-01391-wopenalex-snapshot
Dynamic mechanical and thermal analysis of 3D-printed ABS/POE blends for tunable mechanical properties
inferred← citeshttps://doi.org/10.1007/s40430-025-05579-wopenalex-snapshot
Influence of process parameters on mechanical properties and surface roughness in fused filament fabrication: a comprehensive review
inferred← citeshttps://doi.org/10.1007/s40735-026-01238-2openalex-snapshot
Effect of Processing Condition on Mechanical and Tribological Properties of FDM Fabricated Parts
inferred← citeshttps://doi.org/10.1007/s40964-024-00704-yopenalex-snapshot
Effects of key process parameters on tensile properties and interlayer bonding behavior of 3D printed PLA using fused filament fabrication
inferred← citeshttps://doi.org/10.1007/s40964-025-01178-2openalex-snapshot
The investigation of slicing strategies effect on tensile characteristics for triply periodic minimal surface designs
inferred← citeshttps://doi.org/10.1016/b978-0-323-95486-0.00150-2openalex-snapshot
Additive Manufacturing of Engineering Polymers
inferred← citeshttps://doi.org/10.1016/b978-0-443-45223-9.00001-8openalex-snapshot
Process control and parameter effects on fused filament fabrication 3D printing properties
inferred← citeshttps://doi.org/10.1016/j.aiepr.2025.11.006openalex-snapshot
A comprehensive review on the influence of fused deposition modelling process parameters upon thermoplastic composite materials
inferred← citeshttps://doi.org/10.1016/j.colsurfa.2025.137923openalex-snapshot
Effects of surface pattern strategies on roughness and mechanical properties of additively manufactured structures
inferred← citeshttps://doi.org/10.1016/j.compositesa.2026.109947openalex-snapshot
Additive manufactured sandwich structures for enhanced mechanical and thermal performance of PLA/carbon fiber composites
inferred← citeshttps://doi.org/10.1016/j.heliyon.2024.e25508openalex-snapshot
Evaluation of the surface roughness and dimensional accuracy of low-cost 3D-printed parts made of PLA–aluminum
inferred← citeshttps://doi.org/10.1016/j.matpr.2023.06.212openalex-snapshot
The effect of printing parameters on tensile properties of thermoplastics prepared by fused deposition modeling (FDM) based additive manufacturing technique
inferred← citeshttps://doi.org/10.1016/j.matpr.2023.07.088openalex-snapshot
An experimental examination on surface finish of FDM 3D printed parts
inferred← citeshttps://doi.org/10.1016/j.mtcomm.2026.115715openalex-snapshot
Non-standard raster angles in FFF-printed PLA: Process–mesostructure–property relationships governing tensile and fracture behavior
inferred← citeshttps://doi.org/10.1016/j.mtla.2025.102541openalex-snapshot
Influence of layer orientation on the mechanical properties of fused deposition modelling using PLA and PETG
inferred← citeshttps://doi.org/10.1016/j.nxmate.2025.100540openalex-snapshot
Multi-objective optimization of fused filament fabrication (FFF) parameters for rice husk reinforced PLA composites
inferred← citeshttps://doi.org/10.1016/j.polymdegradstab.2026.112539openalex-snapshot
Hydrolytic degradation of fused filament–fabricated polylactic acid: Architecture-dependent evolution of anisotropic tensile failure
inferred← citeshttps://doi.org/10.1016/j.polymertesting.2026.109302openalex-snapshot
Investigating the processing-controlled fracture behavior of 3D-printed high-impact polystyrene
inferred← citeshttps://doi.org/10.1016/j.rineng.2024.103815openalex-snapshot
Impact load bearing and energy absorption in sandwich polymer composites: Projectile versus shock loadings
inferred← citeshttps://doi.org/10.1016/j.tafmec.2024.104834openalex-snapshot
Strain rate-dependent failure modes of material extrusion-based additively manufactured PETG: A study on crack deflection and penetration
inferred← citeshttps://doi.org/10.1021/acs.jchemed.3c01135openalex-snapshot
Relating Polymer Reptation to Material Extrusion 3D Printing: Mechanical Testing and Mathematical Modeling
inferred← citeshttps://doi.org/10.1021/acsapm.6c02100openalex-snapshot
Melt Rheology to Guide Commercial Polypropylene Grade Selection in Material-Extrusion Additive Manufacturing
inferred← citeshttps://doi.org/10.1039/d5mh01403dopenalex-snapshot
Additive manufacturing of polymers and composites for applications in aerospace and aeronautics
inferred← citeshttps://doi.org/10.1051/mattech/2025027openalex-snapshot
Multi-objective optimization of fused deposition modeling process parameters using Taguchi-based grey relational analysis, and particle swarm optimization for PLA parts
inferred← citeshttps://doi.org/10.1080/01694243.2024.2334121openalex-snapshot
Mechanical characterization of PEEK-CF/PEEK sandwich structures prepared via a combination of fused filament fabrication and epoxy post-bonding
inferred← citeshttps://doi.org/10.1108/rpj-03-2024-0121openalex-snapshot
Effect of process parameters on mechanical and tribological characteristics of FDM printed glass fiber reinforced PLA composites
inferred← citeshttps://doi.org/10.1108/rpj-04-2026-0231openalex-snapshot
Crashworthiness experimental and multi-criteria decision-based evaluation of fused filament fabrication 3D-printed PLA tubular structures with varying infill architectures
inferred← citeshttps://doi.org/10.1108/rpj-06-2024-0257openalex-snapshot
Exploring bending behaviour of hybrid fabric-3D printed structures with infill and raster angle for functional applications
inferred← citeshttps://doi.org/10.1108/rpj-08-2025-0365openalex-snapshot
Optimization of mechanical properties of acrylonitrile styrene acrylate (ASA) in FDM via TOPSIS-simulated annealing hybrid approach
inferred← citeshttps://doi.org/10.1108/rpj-12-2025-0666openalex-snapshot
A review of architectures and process strategies for large-format additive manufacturing
inferred← citeshttps://doi.org/10.1111/ffe.14406openalex-snapshot
The fatigue responses of 3D‐printed polylactic acid (PLA) parts with varying raster angles and printing speeds
inferred← citeshttps://doi.org/10.1111/ffe.14682openalex-snapshot
Investigating the Fracture Performance of the FDM‐ABS Specimens for Low‐Temperature Applications
inferred← citeshttps://doi.org/10.1115/1.4070739openalex-snapshot
Effects of Fused Deposition Modeling Parameters on the Acoustic Black Hole Termination Efficiency of 3D-Printed Polylactic Acid Tapered Beams
inferred← citeshttps://doi.org/10.1142/s0218625x25501410openalex-snapshot
COMPARATIVE ANALYSIS OF STRENGTH PROPERTIES IN 3D-PRINTED PLA AND ABS STRUCTURES USING DNN-WOA PREDICTION MODEL
inferred← citeshttps://doi.org/10.1155/adv/3480281openalex-snapshot
Effect of Process Parameters and Material Selection on the Quality of 3D Printed Products by Fused Deposition Modeling (FDM): A Review
inferred← citeshttps://doi.org/10.1177/08927057231200006openalex-snapshot
Investigation on mechanical properties of polyamide 6 and carbon fiber reinforced composite manufactured by fused deposition modeling technique
inferred← citeshttps://doi.org/10.1177/08927057261441528openalex-snapshot
Optimization of FDM printing parameters for high-speed fabrication of PLA-ABS Bi-layer laminate structures
inferred← citeshttps://doi.org/10.1177/14644207231225761openalex-snapshot
Mechanical performances of printed carbon fiber-reinforced PLA and PETG composites
inferred← citeshttps://doi.org/10.1177/14777606261422765openalex-snapshot
Investigation of drilling performance of PLA samples produced at different raster angles using the FDM method
inferred← citeshttps://doi.org/10.1515/jmbm-2025-0120openalex-snapshot
Influence of single and multi-angle raster patterns on the mechanical performance of fused filament fabricated conductive PLA composites
inferred← citeshttps://doi.org/10.1590/1980-5373-mr-2025-0640openalex-snapshot
Enhancing Mechanical and Structural Properties of PLA/Wood Composites Through Annealing
inferred← citeshttps://doi.org/10.17780/ksujes.1641808openalex-snapshot
A STUDY ON THE MECHANICAL PROPERTIES OF PLA+ SAMPLES MANUFACTURED USING 3D PRINTING WITH DIFFERENT RASTER ANGLES
inferred← citeshttps://doi.org/10.21605/cukurovaumfd.1652812openalex-snapshot
Investigation of Tensile Strength in 3D Printed PLA+ Samples: Influence of Raster Angle and Infill Density
inferred← citeshttps://doi.org/10.26701/ems.1392387openalex-snapshot
The influence of the raster angle on the dimensional accuracy of FDM-printed PLA, PETG, and ABS tensile specimens
inferred← citeshttps://doi.org/10.3390/engproc2026124079openalex-snapshot
Towards Predictive Models of Mechanical Properties in 3D-Printed Polymers: An Exploratory Study
inferred← citeshttps://doi.org/10.3390/jmmp8050228openalex-snapshot
Metal–Polymer Joining by Additive Manufacturing: Effect of Printing Parameters and Interlocking Design
inferred← citeshttps://doi.org/10.3390/polym14050886openalex-snapshot
The Influence of the Process Parameters on the Mechanical Properties of PLA Specimens Produced by Fused Filament Fabrication—A Review
inferred← citeshttps://doi.org/10.3390/polym15010038openalex-snapshot
A Comparative Evaluation of the Effects of Manufacturing Parameters on Mechanical Properties of Additively Manufactured PA and CF-Reinforced PA Materials
inferred← citeshttps://doi.org/10.3390/polym16050615openalex-snapshot
A Comparative Investigation of the Reliability of Biodegradable Components Produced through Additive Manufacturing Technology
inferred← citeshttps://doi.org/10.3390/polym17081054openalex-snapshot
Fused Deposition Modeling of Polymer Composites: Development, Properties and Applications
inferred← citeshttps://doi.org/10.3390/polym17223069openalex-snapshot
Impact of Printing Angle and Layer Height on the Mechanical Strength of PLA Reinforced with Chopped Carbon Fibres Using FDM 3D Printing
inferred← citeshttps://doi.org/10.3390/polym17233123openalex-snapshot
Effects of Build Orientation and Loading Direction on the Compressive Behavior of Additively Manufactured Re-Entrant Auxetic Materials
inferred← citeshttps://doi.org/10.3390/polym18030371openalex-snapshot
Raster Orientation Effects on the Adhesion of iCVD-Deposited PSA Thin Films on FDM-Printed PLA
inferred← citeshttps://doi.org/10.3390/sym17030466openalex-snapshot
Mechanical Properties of 3D-Printed PLA Structures Observed in Framework of Different Rotational Symmetry Orders in Infill Patterns
inferred← citeshttps://doi.org/10.35219/awet.2023.01openalex-snapshot
4D Printing of Commercial based Conductive Polylactic Acid: Strength and Resistance Properties
inferred← citeshttps://doi.org/10.36222/ejt.1833705openalex-snapshot
Experimental and ANOVA-Based Statistical Analysis of the Effects of Infill Pattern and Density on the Tensile Properties of FDM-Printed ABS, PETG, and PLA Thermoplastics
inferred← citeshttps://doi.org/10.4028/p-cn15imopenalex-snapshot
Optimizing FDM/FFF in Additive Manufacturing: A Review of Process Parameters and Material Impacts on Mechanical Properties
inferred← citeshttps://doi.org/10.46519/ij3dptdi.1451666openalex-snapshot
OPTIMIZATION OF ANNEALING AND 3D PRINTING PROCESS PARAMETERS OF PLA PARTS
inferred← citeshttps://doi.org/10.46519/ij3dptdi.1791344openalex-snapshot
THE EFFECT OF DIP COATING OF 3D PRINTED ABS MATERIALS WITH ALUMINA REINFORCED EPOXY COMPOSITE ON SURFACE CHARACTERIZATION
inferred← citeshttps://doi.org/10.52795/mateca.1724130openalex-snapshot
Influence of Printing Parameters on Flexural Strength and Hardness Properties of PLA-CF Composites: An Experimental and Statistical Approach
inferred← citeshttps://doi.org/10.56038/ejrnd.v3i4.315openalex-snapshot
Experimental and statistical investigation of the surface quality of 3D printed products using STH filament material
inferred← citeshttps://doi.org/10.70858/tijmet.1964975openalex-snapshot
The Impact of Sequential Layer Orientation on the Flexural Behavior of 3D-Printed Polycarbonate
Editorial review for independent work. ICSAC — the Institute for Complexity Science and Advanced Computing — runs a structured editorial panel for researchers publishing outside journals, and publishes on CiteStamp rails. Submission is free and goes through ORCID: icsacinstitute.org/submit.