On the public citation graph

Control of Strain Hardening Behavior in High-Mn Austenitic Steels

https://doi.org/10.1007/s40195-014-0084-9
0 signed · 114 inferred · view as graph

Inferred edges come from two machine sources: sweeps of open repository metadata (mostly SSRN and Zenodo), and a bulk OpenAlex citation snapshot. Every row below is labelled with the one it came from. Neither is a complete citation index — absence here is not evidence of absence.

Is this your work? Sign in with ORCID and put your name on the claims that are yours.
Claim with ORCID
Reference health. See whether every reference in this work resolves to a known work and none has been retracted — and get a dated CiteStamped badge you can embed.
See reference health

What this work says

Outgoing claims: the papers this work cites, builds on, or argues with.

inferredcites →https://doi.org/10.1007/bf02817271openalex-snapshot
Strain Hardening of Hadfield Manganese Steel
inferredcites →https://doi.org/10.1007/s11661-009-0050-8openalex-snapshot
Derivation and Variation in Composition-Dependent Stacking Fault Energy Maps Based on Subregular Solution Model in High-Manganese Steels
inferredcites →https://doi.org/10.1007/s11661-009-9992-0openalex-snapshot
On the Tensile Behavior of High-Manganese Twinning-Induced Plasticity Steel
inferredcites →https://doi.org/10.1007/s11661-011-0993-4openalex-snapshot
Characterization and Prediction of Flow Behavior in High-Manganese Twinning Induced Plasticity Steels: Part I. Mechanism Maps and Work-Hardening Behavior
inferredcites →https://doi.org/10.1007/s11661-013-2028-9openalex-snapshot
Effect of the Strain Rate on the TRIP–TWIP Transition in Austenitic Fe-12 pct Mn-0.6 pct C TWIP Steel
inferredcites →https://doi.org/10.1007/s12540-010-0001-3openalex-snapshot
On the transitions of deformation modes of fully austenitic steels at room temperature
inferredcites →https://doi.org/10.1016/0364-5916(91)90030-nopenalex-snapshot
SGTE data for pure elements
inferredcites →https://doi.org/10.1016/0921-5093(94)09751-8openalex-snapshot
Effect of aluminium on deformation mode and mechanical properties of austenitic FeMnCrAlC alloys
inferredcites →https://doi.org/10.1016/j.actamat.2006.10.029openalex-snapshot
Three types of Portevin–Le Chatelier effects: Experiment and modelling
inferredcites →https://doi.org/10.1016/j.actamat.2011.07.009openalex-snapshot
Dislocation and twin substructure evolution during strain hardening of an Fe–22wt.% Mn–0.6wt.% C TWIP steel observed by electron channeling contrast imaging
inferredcites →https://doi.org/10.1016/j.actamat.2011.07.040openalex-snapshot
On the origin of dynamic strain aging in twinning-induced plasticity steels
inferredcites →https://doi.org/10.1016/j.actamat.2013.08.051openalex-snapshot
Atomic-scale investigation of ε and θ precipitates in bainite in 100Cr6 bearing steel by atom probe tomography and ab initio calculations
inferredcites →https://doi.org/10.1016/j.cossms.2011.04.002openalex-snapshot
High manganese austenitic twinning induced plasticity steels: A review of the microstructure properties relationships
inferredcites →https://doi.org/10.1016/j.jmatprotec.2003.10.007openalex-snapshot
Deformation and fracture behaviour of high manganese austenitic steel
inferredcites →https://doi.org/10.1016/j.msea.2004.01.060openalex-snapshot
A physical model of the twinning-induced plasticity effect in a high manganese austenitic steel
inferredcites →https://doi.org/10.1016/j.msea.2004.05.038openalex-snapshot
Modeling of mechanical twinning in a high manganese content austenitic steel
inferredcites →https://doi.org/10.1016/j.msea.2006.12.170openalex-snapshot
Influence of addition elements on the stacking-fault energy and mechanical properties of an austenitic Fe–Mn–C steel
inferredcites →https://doi.org/10.1016/j.msea.2008.05.042openalex-snapshot
Microband-induced plasticity in a high Mn–Al–C light steel
inferredcites →https://doi.org/10.1016/j.msea.2008.09.031openalex-snapshot
Analysis of the tensile behavior of a TWIP steel based on the texture and microstructure evolutions
inferredcites →https://doi.org/10.1016/j.msea.2010.01.037openalex-snapshot
Characterisation of the Portevin-Le Châtelier effect affecting an austenitic TWIP steel based on digital image correlation
inferredcites →https://doi.org/10.1016/j.msea.2010.02.058openalex-snapshot
Stacking fault energy and plastic deformation of fully austenitic high manganese steels: Effect of Al addition
inferredcites →https://doi.org/10.1016/j.scriptamat.2007.02.028openalex-snapshot
Dependence of deformation twinning on grain orientation in compressed high manganese steels
inferredcites →https://doi.org/10.1016/j.scriptamat.2009.03.045openalex-snapshot
Direct observation of the twinning mechanism in an austenitic Fe–Mn–C steel
inferredcites →https://doi.org/10.1016/j.scriptamat.2010.07.036openalex-snapshot
Effect of aging on the microstructure and deformation behavior of austenite base lightweight Fe–28Mn–9Al–0.8C steel
inferredcites →https://doi.org/10.1016/j.scriptamat.2012.08.038openalex-snapshot
Influence of Al content and precipitation state on the mechanical behavior of austenitic high-Mn low-density steels
inferredcites →https://doi.org/10.1016/s1359-6454(03)00117-4openalex-snapshot
On the stress dependence of partial dislocation separation and deformation microstructure in austenitic stainless steels
inferredcites →https://doi.org/10.1051/jp4/1997026openalex-snapshot
In Situ MCD Magnetometry in the Ultrathin Limit: Fe on Cu(100)
inferredcites →https://doi.org/10.1088/1468-6996/14/1/014205openalex-snapshot
Fe–Al–Mn–C lightweight structural alloys: a review on the microstructures and mechanical properties
inferredcites →https://doi.org/10.2355/isijinternational.43.438openalex-snapshot
Supra-Ductile and High-Strength Manganese-TRIP/TWIP Steels for High Energy Absorption Purposes.
inferredcites →https://doi.org/10.3139/146.110333openalex-snapshot
Effect of temperature and strain rate on strain hardening and deformation mechanisms of high manganese austenitic steels

What points at this work

Incoming claims: where this work appears in other papers’ reference lists and arguments.

inferred← citeshttps://doi.org/10.2139/ssrn.4177906openalex-extracted
inferred← citeshttps://doi.org/10.1002/9781119139508.ch6openalex-snapshot
Steel – AB Initio: Quantum Mechanics Guided Design of New Fe‐Based Materials
inferred← citeshttps://doi.org/10.1002/srin.201400587openalex-snapshot
κ‐Phase Formation in Fe–Mn–Al–C Austenitic Steels
inferred← citeshttps://doi.org/10.1002/srin.201600292openalex-snapshot
An Ab Initio Study of Carbon-Induced Ordering in Austenitic Fe-Mn-Al-C Alloys
inferred← citeshttps://doi.org/10.1002/srin.201700218openalex-snapshot
The TRIP Effect and Its Application in Cold Formable Sheet Steels
inferred← citeshttps://doi.org/10.1002/srin.202000346openalex-snapshot
Influence of Cooling and Strain Rates on the Hot Ductility of High Manganese Steels Within the System Fe–Mn–Al–C
inferred← citeshttps://doi.org/10.1002/srin.202100707openalex-snapshot
Dynamic and Static Strain Aging in a High‐Manganese Steel
inferred← citeshttps://doi.org/10.1002/srin.202400447openalex-snapshot
Effects of Cryogenic Rolling on the Microstructure Evolution and Mechanical Properties of Low‐Density Fe‐28Mn‐8Al‐1C Steel
inferred← citeshttps://doi.org/10.1002/srin.202400643openalex-snapshot
Hydrogen Embrittlement of a Prerolled High‐Mn Steel with Different Cut‐Edge Characteristics
inferred← citeshttps://doi.org/10.1007/978-3-030-53825-5_6openalex-snapshot
Low-Density Steels
inferred← citeshttps://doi.org/10.1007/978-3-031-42967-5_3openalex-snapshot
High Strength Steels
inferred← citeshttps://doi.org/10.1007/978-3-031-42967-5_5openalex-snapshot
Precipitation Engineering
inferred← citeshttps://doi.org/10.1007/978-3-319-48170-8_6openalex-snapshot
Steel — Ab Initio: Quantum Mechanics Guided Design of New Fe-Based Materials
inferred← citeshttps://doi.org/10.1007/978-3-319-48194-4_6openalex-snapshot
Steel — ab Initio: Quantum Mechanics Guided Design of New Fe-Based Materials
inferred← citeshttps://doi.org/10.1007/978-981-19-4743-8_8openalex-snapshot
Advanced High-/Medium-Mn Steels
inferred← citeshttps://doi.org/10.1007/s00339-023-06812-wopenalex-snapshot
Constitutive equation and microstructure evolution during isothermal compression of an Fe–26.6Mn–9.8Al–1.0C lightweight steel
inferred← citeshttps://doi.org/10.1007/s10853-018-2551-6openalex-snapshot
A general perspective of Fe–Mn–Al–C steels
inferred← citeshttps://doi.org/10.1007/s10853-026-13023-0openalex-snapshot
High-stress twinning promoted by segregation-dislocation cellular structures in a 3D-printed lightweight compositionally complex steel with enhanced strength-ductility synergy
inferred← citeshttps://doi.org/10.1007/s11249-024-01867-zopenalex-snapshot
Running-in Period During Sliding Wear of Austenitic Steels
inferred← citeshttps://doi.org/10.1007/s11661-020-05666-8openalex-snapshot
Austenite Stability and Strain Hardening in C-Mn-Si Quenching and Partitioning Steels
inferred← citeshttps://doi.org/10.1007/s11661-021-06424-0openalex-snapshot
Microstructural Evolution Study of Fe–Mn–Al–C Steels Through Variable Thermomechanical Treatments
inferred← citeshttps://doi.org/10.1007/s11665-024-10251-wopenalex-snapshot
Effect of Heat Treatments on the Strain Hardening Behavior of AISI 1045 and 304 Steels
inferred← citeshttps://doi.org/10.1007/s11837-014-1137-2openalex-snapshot
Low-Density Steels
inferred← citeshttps://doi.org/10.1007/s40195-016-0406-1openalex-snapshot
Hot Deformation and Dynamic Recrystallization Behavior of Austenite-Based Low-Density Fe–Mn–Al–C Steel
inferred← citeshttps://doi.org/10.1007/s40195-018-0759-8openalex-snapshot
Control of Secondary Phases by Solution Treatment in a N-Alloyed High-Mn Cryogenic Steel
inferred← citeshttps://doi.org/10.1007/s40195-018-0828-zopenalex-snapshot
Grain Size-Dependent Mechanical Properties of a High-Manganese Austenitic Steel
inferred← citeshttps://doi.org/10.1007/s40195-020-01176-zopenalex-snapshot
Dislocation Source and Pile-up in a Twinning-induced Plasticity Steel at High-Cycle Fatigue
inferred← citeshttps://doi.org/10.1007/s40962-020-00492-5openalex-snapshot
Modified Hadfield Steel for Castings of High and Low Gouging Applications
inferred← citeshttps://doi.org/10.1016/j.actamat.2020.07.066openalex-snapshot
In situ microstructural evolution in face-centered and body-centered cubic complex concentrated solid-solution alloys under heavy ion irradiation
inferred← citeshttps://doi.org/10.1016/j.actamat.2022.118589openalex-snapshot
Effects of chemical segregation on ductility-anisotropy in high strength Fe-Mn-Al-C lightweight austenitic steels
inferred← citeshttps://doi.org/10.1016/j.actamat.2025.120930openalex-snapshot
Phase transformation within dynamically refined microbands inducing ultrahigh and sustained strain hardening in high-entropy alloys containing L12 precipitates
inferred← citeshttps://doi.org/10.1016/j.ijrmhm.2026.108152openalex-snapshot
Design of high-strength Fe-based binders by tuning retained-austenite stability for TWIP/TRIP-assisted deformation
inferred← citeshttps://doi.org/10.1016/j.jmrt.2022.01.057openalex-snapshot
Dynamic strain aging and twin formation during warm deformation of a novel medium-entropy lightweight steel
inferred← citeshttps://doi.org/10.1016/j.jmrt.2023.06.037openalex-snapshot
Research status and development prospect of Fe–Mn–C–Al system low-density steels
inferred← citeshttps://doi.org/10.1016/j.jmrt.2023.12.009openalex-snapshot
Multiple morphologies and twin structure generated by a definite growth behavior of grain boundary M23C6 in tempered Fe–15Mn–3Al-0.7C steel
inferred← citeshttps://doi.org/10.1016/j.jmrt.2025.04.010openalex-snapshot
Enhanced stability of retained austenite to facilitate deformation compatibility of surrounding ferrite in a medium manganese steel
inferred← citeshttps://doi.org/10.1016/j.jmst.2021.04.068openalex-snapshot
Achieving high strength and ductility in Fe50Mn25Ni10Cr15 medium entropy alloy via Al alloying
inferred← citeshttps://doi.org/10.1016/j.jnucmat.2023.154827openalex-snapshot
Microstructural evolution of compositionally complex solid-solution alloys under in-situ dual-beam irradiation
inferred← citeshttps://doi.org/10.1016/j.matchar.2021.111013openalex-snapshot
Evolution of microstructure, texture and mechanical properties of Fe–30Mn–11Al–1.2C low-density steel during cold rolling
inferred← citeshttps://doi.org/10.1016/j.matchar.2023.112853openalex-snapshot
Critical role of κ-carbides in the multi-stage work hardening process of a lightweight austenitic steel
inferred← citeshttps://doi.org/10.1016/j.matdes.2015.03.043openalex-snapshot
Tensile deformation of low density duplex Fe–Mn–Al–C steel
inferred← citeshttps://doi.org/10.1016/j.metadv.2026.06.003openalex-snapshot
Advanced lightweight Fe-Mn-Al-Ni-C compositionally complex steels: Alloy design, microstructural evolution, and deformation mechanisms
inferred← citeshttps://doi.org/10.1016/j.msea.2015.06.047openalex-snapshot
Temperature effect on deformation mechanisms and mechanical properties of a high manganese C+N alloyed austenitic stainless steel
inferred← citeshttps://doi.org/10.1016/j.msea.2015.10.005openalex-snapshot
Influence of Al on the temperature dependence of strain hardening behavior and glide planarity in Fe–Cr–Ni–Mn–C austenitic stainless steels
inferred← citeshttps://doi.org/10.1016/j.msea.2018.07.023openalex-snapshot
Recrystallization behavior in a low-density high-Mn high-Al austenitic steel undergone thin strip casting process
inferred← citeshttps://doi.org/10.1016/j.msea.2018.09.068openalex-snapshot
The valuation of microstructural evolution in a thermo-mechanically processed transformation-twinning induced plasticity steel during strain hardening
inferred← citeshttps://doi.org/10.1016/j.msea.2020.138984openalex-snapshot
Intragranular brittle precipitates improve strain hardening capability of Fe–30Mn–11Al–1.2C low-density steel
inferred← citeshttps://doi.org/10.1016/j.msea.2021.141009openalex-snapshot
Influence of nano-scale concentration gradient of alloying elements on the ductility in an intercritically annealed and tempered medium Mn steel
inferred← citeshttps://doi.org/10.1016/j.msea.2022.144132openalex-snapshot
Effect of Early Stage of Κ′-Carbides Precipitation on Tensile Properties and Deformation Mechanism in High Mn-Al-C Austenitic Low-Density Steel
inferred← citeshttps://doi.org/10.1016/j.msea.2023.145109openalex-snapshot
Microstructure evolution and mechanical behavior of Fe–Mn–Al–C low-density steel upon aging
inferred← citeshttps://doi.org/10.1016/j.msea.2023.145998openalex-snapshot
Developing austenitic high-manganese high-carbon steels for biodegradable stent applications: Microstructural and mechanical studies
inferred← citeshttps://doi.org/10.1016/j.msea.2024.146866openalex-snapshot
Ti-Mo microalloyed medium Mn steels: Precipitation and strengthening mechanism
inferred← citeshttps://doi.org/10.1016/j.msea.2024.147741openalex-snapshot
Excellent mechanical properties and underlined deformation twinning mechanism of a low-carbon low-density cryogenic steel
inferred← citeshttps://doi.org/10.1016/j.msea.2026.151031openalex-snapshot
Slip-band-mediated heterogeneous B2 phase enables strength-ductility synergy
inferred← citeshttps://doi.org/10.1016/j.mser.2017.09.002openalex-snapshot
On deformation behavior of Fe-Mn based structural alloys
inferred← citeshttps://doi.org/10.1016/j.mtla.2025.102407openalex-snapshot
Three-stage deformation behaviors of a austenitic Fe-Mn-Al-C low-density steel: slip bands–twinning–shear bands
inferred← citeshttps://doi.org/10.1016/j.pmatsci.2017.05.002openalex-snapshot
Current state of Fe-Mn-Al-C low density steels
inferred← citeshttps://doi.org/10.1016/j.proeng.2017.10.1052openalex-snapshot
Investigations on Springback in High Manganese TWIP-Steels using U-Profile Draw Bending
inferred← citeshttps://doi.org/10.1016/j.scriptamat.2020.03.023openalex-snapshot
Towards superior mechanical properties of hetero-structured high-entropy alloys via engineering multicomponent intermetallic nanoparticles
inferred← citeshttps://doi.org/10.1016/j.triboint.2019.03.002openalex-snapshot
Elucidating the role of κ-carbides in Fe Mn Al C alloys on abrasion wear
inferred← citeshttps://doi.org/10.1016/j.wear.2015.11.019openalex-snapshot
Effect of normal load on abrasive wear resistance and wear micromechanisms in FeMnAlC alloy and other austenitic steels
inferred← citeshttps://doi.org/10.1080/02670836.2016.1235855openalex-snapshot
Hot ductility behaviour of high manganese steels with varying aluminium contents
inferred← citeshttps://doi.org/10.1080/02670836.2017.1312208openalex-snapshot
Medium-manganese steels processed by austenite-reverted-transformation annealing for automotive applications
inferred← citeshttps://doi.org/10.1088/1757-899x/1249/1/012011openalex-snapshot
Tensile deformation-induced twinning in an austenitic low density steel over a wide range of temperature
inferred← citeshttps://doi.org/10.1115/1.4033632openalex-snapshot
Stacking Fault Energy Maps of Fe–Mn–Al–C–Si Steels: Effect of Temperature, Grain Size, and Variations in Compositions
inferred← citeshttps://doi.org/10.1126/science.aas8815openalex-snapshot
Multicomponent intermetallic nanoparticles and superb mechanical behaviors of complex alloys
inferred← citeshttps://doi.org/10.1557/mrs.2016.63openalex-snapshot
Ab initio-guided design of twinning-induced plasticity steels
inferred← citeshttps://doi.org/10.1557/s43580-023-00699-8openalex-snapshot
Development and characterization of a cast steel reinforced with primary carbides for high strength and severe wear applications
inferred← citeshttps://doi.org/10.1557/s43580-024-01042-5openalex-snapshot
Effect of N addition on the microstructure and work-hardening behavior of a high Ti and W-alloyed cast steel
inferred← citeshttps://doi.org/10.1590/1980-5373-mr-2016-0932openalex-snapshot
Influence of Temperature on Mechanical Properties, Fracture Morphology and Strain Hardening Behavior of a 304 Stainless Steel
inferred← citeshttps://doi.org/10.1590/1980-5373-mr-2017-0169openalex-snapshot
[RETRACTED ARTICLE]: Load Dependent Wear Analysis of Manganese Steels - Influence of Al Content
inferred← citeshttps://doi.org/10.3390/app112110406openalex-snapshot
Consequences of Deep Rolling at Elevated Temperature on Near-Surface and Fatigue Properties of High-Manganese TWIP Steel X40MnCrAl19-2
inferred← citeshttps://doi.org/10.3390/books978-3-03897-359-1openalex-snapshot
First-Principles Approaches to Metals, Alloys, and Metallic Compounds
inferred← citeshttps://doi.org/10.3390/ma10101129openalex-snapshot
Investigation of the Microstructure Evolution in a Fe-17Mn-1.5Al-0.3C Steel via In Situ Synchrotron X-ray Diffraction during a Tensile Test
inferred← citeshttps://doi.org/10.3390/ma14216502openalex-snapshot
Influence of C and N on Strain-Induced Martensite Formation in Fe-15Cr-7Mn-4Ni-0.5Si Austenitic Steel
inferred← citeshttps://doi.org/10.3390/ma16031083openalex-snapshot
Prediction of True Stress at Hot Deformation of High Manganese Steel by Artificial Neural Network Modeling
inferred← citeshttps://doi.org/10.3390/ma19040727openalex-snapshot
Recent Advances in κ-Carbide Precipitation Behavior and Its Influence on Mechanical Properties in Austenite-Based Fe-Mn-Al-C Lightweight Steels
inferred← citeshttps://doi.org/10.3390/met11122054openalex-snapshot
The Evolution of Intermetallic Compounds in High-Entropy Alloys: From the Secondary Phase to the Main Phase
inferred← citeshttps://doi.org/10.3390/met12040602openalex-snapshot
Microstructure, Mechanical Properties and Deformation Behavior of Fe-28.7Mn-10.2Al-1.06C High Specific Strength Steel
inferred← citeshttps://doi.org/10.3390/met15020102openalex-snapshot
Effect of Nb Alloying and Solution Treatment on the Mechanical Properties of Cold-Rolled Fe-Mn-Al-C Low-Density Steel
inferred← citeshttps://doi.org/10.3390/met8010044openalex-snapshot
On the Mn–C Short-Range Ordering in a High-Strength High-Ductility Steel: Small Angle Neutron Scattering and Ab Initio Investigation
inferred← citeshttps://doi.org/10.3390/met8050357openalex-snapshot
Influence of Intercritical Annealing Temperature on Microstructure and Mechanical Properties of a Cold-Rolled Medium-Mn Steel
inferred← citeshttps://doi.org/10.3390/met8060415openalex-snapshot
Deformation Behavior of High-Mn TWIP Steels Processed by Warm-to-Hot Working
inferred← citeshttps://doi.org/10.3390/met9070776openalex-snapshot
Improving Mechanical Properties of 18%Mn TWIP Steels by Cold Rolling and Annealing
Editorial review for independent work. ICSAC — the Institute for Complexity Science and Advanced Computing — runs a structured editorial panel for researchers publishing outside journals, and publishes on CiteStamp rails. Submission is free and goes through ORCID: icsacinstitute.org/submit.