On the public citation graph
Translaminar enveloping ply for CFRP interlaminar toughening
0 signed · 88 inferred · view as graph
Inferred edges come from two machine sources: sweeps of open repository metadata (mostly SSRN and Zenodo), and a bulk OpenAlex citation snapshot. Every row below is labelled with the one it came from. Neither is a complete citation index — absence here is not evidence of absence.
Is this your work? Sign in with ORCID and put your name on the
claims that are yours.
Reference health. See whether every reference in this work resolves to a
known work and none has been retracted — and get a dated CiteStamped
badge you can embed.
What this work says
Outgoing claims: the papers this work cites, builds on, or argues with.
inferredcites →https://doi.org/10.1002/adma.201100933openalex-snapshot
Three‐Dimensional Microvascular Fiber‐Reinforced Composites
inferredcites →https://doi.org/10.1002/pc.26593openalex-snapshot
Mode II interlaminar fracture toughness enhancement of fine z‐pin reinforced carbon fiber composite with low fraction of pins
inferredcites →https://doi.org/10.1016/j.actbio.2014.03.022openalex-snapshot
Bio-inspired impact-resistant composites
inferredcites →https://doi.org/10.1016/j.cirpj.2022.02.011openalex-snapshot
Dynamic modeling and parameter identification for a gantry-type automated fiber placement machine combined with hydraulic balance system and nonlinear friction
inferredcites →https://doi.org/10.1016/j.coco.2020.100481openalex-snapshot
Spunbonded needle-punched nonwoven geotextiles for filtration and drainage applications: Manufacturing and structural design
inferredcites →https://doi.org/10.1016/j.coco.2020.100622openalex-snapshot
Interlaminar toughening in carbon fiber/epoxy composites interleaved with CNT-decorated polycaprolactone nanofibers
inferredcites →https://doi.org/10.1016/j.coco.2021.100940openalex-snapshot
Enhancement of the interlaminar fracture toughness and damping properties of carbon fiber reinforced composites using cellulose nanofiber interleaves
inferredcites →https://doi.org/10.1016/j.compositesa.2011.09.026openalex-snapshot
Mode II interfacial toughening through discontinuous interleaves for damage suppression and control
inferredcites →https://doi.org/10.1016/j.compositesa.2011.10.009openalex-snapshot
Mode I interfacial toughening through discontinuous interleaves for damage suppression and control
inferredcites →https://doi.org/10.1016/j.compositesa.2015.03.011openalex-snapshot
Experimental investigation of three-dimensional woven composites
inferredcites →https://doi.org/10.1016/j.compositesa.2016.02.008openalex-snapshot
Experimental determination of the mode I delamination fracture and fatigue properties of thin 3D woven composites
inferredcites →https://doi.org/10.1016/j.compositesa.2016.03.027openalex-snapshot
Using thin-plies to improve the damage resistance and tolerance of aeronautical CFRP composites
inferredcites →https://doi.org/10.1016/j.compositesa.2017.12.006openalex-snapshot
The electric field alignment of short carbon fibres to enhance the toughness of epoxy composites
inferredcites →https://doi.org/10.1016/j.compositesa.2018.04.028openalex-snapshot
Delamination toughening and healing performance of woven composites with hybrid z-fibre reinforcement
inferredcites →https://doi.org/10.1016/j.compositesa.2018.11.011openalex-snapshot
Synergistic mode II delamination toughening of composites using multi-scale carbon-based reinforcements
inferredcites →https://doi.org/10.1016/j.compositesa.2019.02.010openalex-snapshot
Mode II interlaminar delamination resistance and healing performance of 3D composites with hybrid z-fibre reinforcement
inferredcites →https://doi.org/10.1016/j.compositesa.2019.03.028openalex-snapshot
Bio-inspired design for enhanced damage tolerance of self-reinforced polypropylene/carbon fibre polypropylene hybrid composites
inferredcites →https://doi.org/10.1016/j.compositesa.2019.05.038openalex-snapshot
Hierarchical mode I and mode II interlaminar toughening of Z-pinned composites using 1D and 2D carbon nanofillers
inferredcites →https://doi.org/10.1016/j.compositesa.2019.105615openalex-snapshot
Experimental study of Z-pin fatigue; understanding of mode I and II coupon behaviour
inferredcites →https://doi.org/10.1016/j.compositesa.2020.106128openalex-snapshot
Review of z-pinned laminates and sandwich composites
inferredcites →https://doi.org/10.1016/j.compositesa.2021.106566openalex-snapshot
Z-Pinned composites with combined delamination toughness and delamination Self-Repair properties
inferredcites →https://doi.org/10.1016/j.compositesa.2021.106593openalex-snapshot
Effect of Z-pin insertion angles on low-velocity impact mechanical response and damage mechanism of CFRP laminates with different layups
inferredcites →https://doi.org/10.1016/j.compositesa.2021.106730openalex-snapshot
A review on three-dimensional stitched composites and their research perspectives
inferredcites →https://doi.org/10.1016/j.compositesa.2021.106733openalex-snapshot
Dynamic behaviour of Bio-inspired heterocyclic aramid Fibre-reinforced laminates subjected to Low-velocity Drop-weight impact
inferredcites →https://doi.org/10.1016/j.compositesb.2008.01.002openalex-snapshot
Effects of particle size, particle/matrix interface adhesion and particle loading on mechanical properties of particulate–polymer composites
inferredcites →https://doi.org/10.1016/j.compositesb.2018.10.031openalex-snapshot
Synergistic delamination toughening of composites using multi-scale carbon reinforcements
inferredcites →https://doi.org/10.1016/j.compositesb.2021.108842openalex-snapshot
Using ultra-thin interlaminar carbon nanotube sheets to enhance the mechanical and electrical properties of carbon fiber reinforced polymer composites
inferredcites →https://doi.org/10.1016/j.compositesb.2021.109223openalex-snapshot
Effect of the nano-filler content on the compressive strength of continuous carbon fibre/epoxy matrix composites
inferredcites →https://doi.org/10.1016/j.compositesb.2021.109315openalex-snapshot
Enhanced interfacial adhesion of carbon fiber/epoxy composites by synergistic reinforcement with multiscale “rigid-flexible” structure at interphase
inferredcites →https://doi.org/10.1016/j.compositesb.2022.109785openalex-snapshot
Intermittent carbon nanotube encapsulation of carbon fiber: A facile and efficient strategy to simultaneously strengthen and toughen interphase of composites
inferredcites →https://doi.org/10.1016/j.compositesb.2022.109827openalex-snapshot
A feather-inspired interleaf for enhanced interlaminar fracture toughness of carbon fiber reinforced polymer composites
inferredcites →https://doi.org/10.1016/j.compositesb.2022.109900openalex-snapshot
On mode-I and mode-II interlaminar crack migration and R-curves in carbon/epoxy laminates with hybrid toughening via core-shell rubber particles and thermoplastic micro-fibre veils
inferredcites →https://doi.org/10.1016/j.compscitech.2013.12.009openalex-snapshot
Improving the mode I delamination fatigue resistance of composites using z-pins
inferredcites →https://doi.org/10.1016/j.compscitech.2014.02.001openalex-snapshot
Experimental characterisation of mixed mode traction–displacement relationships for a single carbon composite Z-pin
inferredcites →https://doi.org/10.1016/j.compscitech.2015.06.006openalex-snapshot
Improving the toughness and electrical conductivity of epoxy nanocomposites by using aligned carbon nanofibres
inferredcites →https://doi.org/10.1016/j.compscitech.2016.06.005openalex-snapshot
Multi-scale toughening of fibre composites using carbon nanofibres and z-pins
inferredcites →https://doi.org/10.1016/j.compscitech.2018.07.004openalex-snapshot
Towards quasi isotropic laminates with engineered fracture behaviour for industrial applications
inferredcites →https://doi.org/10.1016/j.compscitech.2018.07.034openalex-snapshot
Multi-scale toughening of epoxy composites via electric field alignment of carbon nanofibres and short carbon fibres
inferredcites →https://doi.org/10.1016/j.compscitech.2019.02.024openalex-snapshot
Effective use of metallic Z-pins for composites' through-thickness reinforcement
inferredcites →https://doi.org/10.1016/j.compscitech.2019.107681openalex-snapshot
Interlocking thin-ply reinforcement concept for improved fracture toughness and damage tolerance
inferredcites →https://doi.org/10.1016/j.compscitech.2020.108047openalex-snapshot
Herringbone-Bouligand CFRP structures: A new tailorable damage-tolerant solution for damage containment and reduced delaminations
inferredcites →https://doi.org/10.1016/j.compscitech.2020.108413openalex-snapshot
Minimizing the in-plane damage of Z-pinned composite laminates via a pre-hole pin insertion process
inferredcites →https://doi.org/10.1016/j.compscitech.2021.108650openalex-snapshot
Toughening mechanism of coelacanth-fish-inspired double-helicoidal composites
inferredcites →https://doi.org/10.1016/j.compscitech.2021.108669openalex-snapshot
Learning from nature: Bio-inspiration for damage-tolerant high-performance fibre-reinforced composites
inferredcites →https://doi.org/10.1016/j.compscitech.2021.108906openalex-snapshot
Effect of Ø 0.11 mm Z-pinning on the properties of composite laminates via an ultrasound guided insertion process
inferredcites →https://doi.org/10.1016/j.compscitech.2022.109328openalex-snapshot
Fatigue life assessment and damage evolution in Z-pinned laminates
inferredcites →https://doi.org/10.1016/j.compstruct.2017.09.096openalex-snapshot
Analysis of the impact and compression after impact behavior of tufted laminated composites
inferredcites →https://doi.org/10.1016/j.compstruct.2018.05.103openalex-snapshot
Interaction between nacre-like CFRP mesolayers and long-fibre interlayers
inferredcites →https://doi.org/10.1016/j.compstruct.2019.111808openalex-snapshot
Mode II interlaminar fracture toughness of carbon nanotubes/epoxy film-interleaved carbon fiber composites
inferredcites →https://doi.org/10.1016/j.compstruct.2020.112948openalex-snapshot
Deformation and fracture mechanisms of automated fiber placement pre-preg laminates under out-of-plane tensile loading
inferredcites →https://doi.org/10.1016/j.compstruct.2021.113859openalex-snapshot
Influence of fiber cutting at the composite grid intersection on the compressive performance of laminate
inferredcites →https://doi.org/10.1016/j.compstruct.2021.113963openalex-snapshot
Effect of gap and overlap fiber placement defects on the delamination behavior of L-shaped composite laminates
inferredcites →https://doi.org/10.1016/j.ijmecsci.2021.106567openalex-snapshot
Comparison of laminate thickness on the low velocity impact behaviors for Z-pinned composite laminates
inferredcites →https://doi.org/10.1016/j.ijsolstr.2005.05.017openalex-snapshot
In-plane properties of composite laminates with through-thickness pin reinforcement
inferredcites →https://doi.org/10.1016/j.jmps.2018.04.004openalex-snapshot
Realising damage-tolerant nacre-inspired CFRP
inferredcites →https://doi.org/10.1016/j.jmps.2018.12.008openalex-snapshot
Failure mechanisms of biological crossed-lamellar microstructures applied to synthetic high-performance fibre-reinforced composites
inferredcites →https://doi.org/10.1016/j.matdes.2016.01.051openalex-snapshot
Mode II delamination resistance of composites reinforced with inclined Z-pins
inferredcites →https://doi.org/10.1016/j.matdes.2018.01.051openalex-snapshot
Enhancing mode-I and mode-II fracture toughness of epoxy and carbon fibre reinforced epoxy composites using multi-walled carbon nanotubes
inferredcites →https://doi.org/10.1016/j.matdes.2022.110671openalex-snapshot
Recycled carbon fibre mats for interlayer toughening of carbon fibre/epoxy composites
inferredcites →https://doi.org/10.1016/j.matpr.2019.12.086openalex-snapshot
Recent developments on characterization of needle-punched nonwoven fabric reinforced polymer composites – A review
inferredcites →https://doi.org/10.1016/j.polymer.2010.10.021openalex-snapshot
A biomimic shape memory polymer based self-healing particulate composite
inferredcites →https://doi.org/10.1016/j.resconrec.2022.106163openalex-snapshot
A novel approach on recycling short-chopped carbon fibers by electric field induced manipulation
inferredcites →https://doi.org/10.1038/nmat1822openalex-snapshot
A biomimetic three-dimensional woven composite scaffold for functional tissue engineering of cartilage
inferredcites →https://doi.org/10.1088/0964-1726/19/3/035007openalex-snapshot
A self-healing 3D woven fabric reinforced shape memory polymer composite for impact mitigation
What points at this work
Incoming claims: where this work appears in other papers’ reference lists and arguments.
inferred← citeshttps://doi.org/10.2139/ssrn.4495476openalex-extracted
Mechanical Investigation of Tractive Rolling Contact in Automated Fiber Placement
inferred← citeshttps://doi.org/10.2139/ssrn.4758618openalex-extracted
Novel Thermoplastic Matrix Resin with Low Processing Temperature and Good Interfacial Strength for Carbon Fiber-Reinforced Composites
inferred← citeshttps://doi.org/10.1002/admt.202501266openalex-snapshot
Effect of the Size of Wrinkle Defect on the Impact and CAI Response of CFRP Laminates
inferred← citeshttps://doi.org/10.1002/pc.70175openalex-snapshot
Influence Mechanism of Constituent Materials on the Interlaminar Fracture Properties of Composite Laminates
inferred← citeshttps://doi.org/10.1002/pc.70251openalex-snapshot
Preparation of Nanotubes Grafted by Resin Matrix and Its Effect on the Mechanical Properties of Carbon Fiber Reinforced Poly(Bisphthalazinone Ether Sulfone Ketone) Composites
inferred← citeshttps://doi.org/10.1002/pc.70793openalex-snapshot
In‐Plane Tensile Damage and Failure Mechanisms of Open‐Hole Laminate due to Manufacturing Induced Triangular Gaps Defects
inferred← citeshttps://doi.org/10.1007/978-981-99-3516-1_142-1openalex-snapshot
Design and Manufacturing of High-Performance and High-Temperature Thermoplastic Composite for Aerospace Applications
inferred← citeshttps://doi.org/10.1007/s12221-026-01410-yopenalex-snapshot
Mode I Interlaminar Matrix Toughening and In-Plane Mechanical Properties of CFRP Laminates Interleaved with CB-Modified PEO Electrospun Fiber Mats
inferred← citeshttps://doi.org/10.1016/j.cirpj.2026.01.008openalex-snapshot
Texture-geometry-based mesh quality assessment for automated fiber placement
inferred← citeshttps://doi.org/10.1016/j.compositesa.2024.108706openalex-snapshot
Electric field-assisted alignment of carbon nanotubes in the interlayers of CFRP composites to enhance the properties
inferred← citeshttps://doi.org/10.1016/j.compositesb.2023.111000openalex-snapshot
Cure path dependency of damage resistance in interlayer toughened composite laminates subjected to quasi-static indentation and low-velocity impact
inferred← citeshttps://doi.org/10.1016/j.compositesb.2024.111503openalex-snapshot
Novel thermoplastic matrix resin with low processing temperature and good interfacial strength for carbon fiber-reinforced polyethersulfone
inferred← citeshttps://doi.org/10.1016/j.compositesb.2026.113658openalex-snapshot
Artificial intelligence-enabled material design for automated manufacturing of tailored composites – a review
inferred← citeshttps://doi.org/10.1016/j.compscitech.2024.110594openalex-snapshot
Translaminar-envelope ply for CFRP mechanical enhancement
inferred← citeshttps://doi.org/10.1016/j.compstruct.2023.117624openalex-snapshot
Damage and failure mechanisms of CFRP due to manufacturing induced wrinkling defects
inferred← citeshttps://doi.org/10.1016/j.compstruct.2026.120722openalex-snapshot
Strengthening of composite tapered laminates with pseudo-woven configuration under tension–torsion loading
inferred← citeshttps://doi.org/10.1016/j.engfailanal.2025.110050openalex-snapshot
Enhancing compressive damage resistance and post-damage stability of CFRP laminates in anchorage systems via aramid pulp interlayer and resin pre-coating
inferred← citeshttps://doi.org/10.1016/j.jmapro.2023.09.057openalex-snapshot
An analytical model for pressure distribution in automated fiber placement on irregular surfaces and its application in aeronautical manufacturing
inferred← citeshttps://doi.org/10.1016/j.tws.2023.110984openalex-snapshot
High-efficient improvement in flexural properties of carbon/Kevlar-fiber hybrid composites by CNT-toughening only between xenogeneic fiber-layers
inferred← citeshttps://doi.org/10.1016/j.tws.2025.113146openalex-snapshot
Enhancing the interlaminar toughness and impact resistance of CFRP using MWCNTs and core-shell rubber synergistic strategy
inferred← citeshttps://doi.org/10.1016/j.tws.2026.115672openalex-snapshot
Needling contact velocity regulates interlayer peel behavior of carbon fiber preforms via a structure-informed bridging mechanism
inferred← citeshttps://doi.org/10.1088/1742-6596/2951/1/012068openalex-snapshot
The effects of bubble defect parameters on the mechanical properties of polymer materials
inferred← citeshttps://doi.org/10.1177/00219983261449147openalex-snapshot
End effector pose optimization based on an integrated normal vector for improved compaction pressure uniformity in AFP on complex curved molds
inferred← citeshttps://doi.org/10.3390/polym17101355openalex-snapshot
Evaluating Effects of Wrinkle Defects on Impact Response and Residual Compressive Strength After Impact in CFRP
Editorial review for independent work. ICSAC — the Institute for Complexity
Science and Advanced Computing — runs a structured editorial panel for researchers
publishing outside journals, and publishes on CiteStamp rails. Submission is free
and goes through ORCID: icsacinstitute.org/submit.