On the public citation graph

A new method to reduce delaminations during drilling of FRP laminates by feed rate control

https://doi.org/10.1016/j.compstruct.2017.12.005

0 signed · 190 inferred · view as graph

Inferred edges come from two machine sources: sweeps of open repository metadata (mostly SSRN and Zenodo), and a bulk OpenAlex citation snapshot. Every row below is labelled with the one it came from. Neither is a complete citation index — absence here is not evidence of absence.

Is this your work? Sign in with ORCID and put your name on the claims that are yours.

Claim with ORCID

Reference health. See whether every reference in this work resolves to a known work and none has been retracted — and get a dated CiteStamped badge you can embed.

See reference health

What this work says

Outgoing claims: the papers this work cites, builds on, or argues with.

inferredcites →https://doi.org/10.1007/978-1-84800-213-5_6openalex-snapshot

Drilling Polymeric Matrix Composites

inferredcites →https://doi.org/10.1007/978-3-319-03749-3_17openalex-snapshot

Mechanical Testing of Polymeric Composites for Aircraft Applications: Standards, Requirements and Limitations

inferredcites →https://doi.org/10.1007/s10443-016-9499-yopenalex-snapshot

Optimization of the Temperature-Time Curve for the Curing Process of Thermoset Matrix Composites

inferredcites →https://doi.org/10.1007/s11340-014-9967-yopenalex-snapshot

Influence of Machining Process and Machining Induced Surface Roughness on Mechanical Properties of Continuous Fiber Composites

inferredcites →https://doi.org/10.1016/0890-6955(96)00013-2openalex-snapshot

A neural network thrust force controller to minimize delamination during drilling of graphite-epoxy laminates

inferredcites →https://doi.org/10.1016/j.cirp.2012.03.036openalex-snapshot

Delamination reduction in drilling composite materials by active backup force

inferredcites →https://doi.org/10.1016/j.compositesa.2013.09.002openalex-snapshot

Investigating the effect of machining processes on the mechanical behavior of composite plates with circular holes

inferredcites →https://doi.org/10.1016/j.compositesb.2012.01.007openalex-snapshot

Optimization of machining parameters at high speed drilling of carbon fiber reinforced plastic (CFRP) laminates

inferredcites →https://doi.org/10.1016/j.compositesb.2016.10.064openalex-snapshot

A new methodology to evaluate the influence of curing overheating on the mechanical properties of thick FRP laminates

inferredcites →https://doi.org/10.1016/j.compscitech.2006.10.009openalex-snapshot

A novel approach based on digital image analysis to evaluate the delamination factor after drilling composite laminates

inferredcites →https://doi.org/10.1016/j.compstruct.2011.11.024openalex-snapshot

A review of mechanical drilling for composite laminates

inferredcites →https://doi.org/10.1016/j.compstruct.2016.07.015openalex-snapshot

Critical thrust force predictions during drilling: Analytical modeling and X-ray tomography quantification

inferredcites →https://doi.org/10.1016/j.compstruct.2017.02.079openalex-snapshot

In process monitoring of cutting temperature during the drilling of FRP laminate

inferredcites →https://doi.org/10.1016/j.ijfatigue.2015.06.012openalex-snapshot

Role of the surface quality on the mechanical behavior of CFRP bolted composite joints

inferredcites →https://doi.org/10.1016/j.jmatprotec.2006.11.146openalex-snapshot

Drilling of fiber reinforced plastics: A review

inferredcites →https://doi.org/10.1016/j.matdes.2010.01.011openalex-snapshot

Neural network approach for estimating the residual tensile strength after drilling in uni-directional glass fiber reinforced plastic laminates

inferredcites →https://doi.org/10.1016/j.paerosci.2005.02.004openalex-snapshot

Fibre reinforced composites in aircraft construction

inferredcites →https://doi.org/10.1016/j.proeng.2016.11.689openalex-snapshot

Analysis of Thermal Damage in FRP Drilling

inferredcites →https://doi.org/10.1016/j.wear.2013.01.046openalex-snapshot

Tribo-functional design of double cone drill implications in tool wear during drilling of copper mesh/CFRP/woven ply

inferredcites →https://doi.org/10.1016/s0890-6955(96)00095-8openalex-snapshot

Some experimental investigations in the drilling of carbon fiber-reinforced plastic (CFRP) composite laminates

inferredcites →https://doi.org/10.1177/0954405417703426openalex-snapshot

Impact of the carbon nanotube reinforcement in glass/epoxy polymeric nanocomposite on the quality of fiber laser drilling

inferredcites →https://doi.org/10.1504/ijmmm.2008.020967openalex-snapshot

Experimental and analytical study of the influence of HexFit® glass fibre composite manufacturing process on delamination during drilling

inferredcites →https://doi.org/10.21817/ijet/2016/v8i5/160805402openalex-snapshot

Milling machining of CFRPs: a model to simulate and forecast the cutting forces intime domain

What points at this work

Incoming claims: where this work appears in other papers’ reference lists and arguments.

inferred← citeshttps://doi.org/10.2139/ssrn.4626806openalex-extracted

Prediction Model of Thrust Force Induced by Main Cutting Edge in Cfrp Drilling Considering the Influence of Cutting Speed

inferred← citeshttps://doi.org/10.1002/cepa.3176openalex-snapshot

Investigation of Flexural Toughness of ECC Components Reinforced with CFRP Designed for Link Slab

inferred← citeshttps://doi.org/10.1002/mawe.202300010openalex-snapshot

An experimental examination of the dry drilling machinability features of cellular glass‐filled new‐generation metallic composite foams

inferred← citeshttps://doi.org/10.1002/pat.70667openalex-snapshot

CNF Effects in CFRP Under HCl / NaOH : Drilling Parameters, Delamination Maps, and Mechanical Performance

inferred← citeshttps://doi.org/10.1002/pc.25431openalex-snapshot

Investigation on effect of process parameters on delamination during drilling of kenaf‐banana fiber reinforced in epoxy hybrid composite using Taguchi method

inferred← citeshttps://doi.org/10.1002/pc.25663openalex-snapshot

On the machining behavior of carbon fiber reinforced polyimide and PEEK thermoplastic composites

inferred← citeshttps://doi.org/10.1002/pc.26864openalex-snapshot

Temperature analysis in fiber metal laminates drilling: Experimental and numerical results

inferred← citeshttps://doi.org/10.1002/pc.29734openalex-snapshot

New strategy based on crystallinity control in enhancing the flexural strength of drilled CF / PEEK composite laminate

inferred← citeshttps://doi.org/10.1007/978-3-030-90487-6_6openalex-snapshot

Machining of Fibrous Composites: Recent Advances and Future Perspectives

inferred← citeshttps://doi.org/10.1007/978-3-031-53375-4_18openalex-snapshot

The Effects of Drilling Parameters on Delamination in the Machining Process of Carbon-Reinforced Thermoplastic Polymer Composite Used in the Automotive Industry

inferred← citeshttps://doi.org/10.1007/978-981-13-9539-0_33openalex-snapshot

The Effect of Carbon Fiber Reinforced Polymer (CFRP) Micro Drilling Parameter on Hole Accuracy

inferred← citeshttps://doi.org/10.1007/978-981-33-4153-1_2openalex-snapshot

Thrust Force Analyses in Drilling FRP Composites

inferred← citeshttps://doi.org/10.1007/s00170-018-2873-1openalex-snapshot

A novelty optimization approach for drilling of CFRP nanocomposite laminates

inferred← citeshttps://doi.org/10.1007/s00170-018-2895-8openalex-snapshot

Analysis of thrust force and characteristics of uncut fibres at non-conventional oriented drilling of unidirectional carbon fibre-reinforced plastic (UD-CFRP) composite laminates

inferred← citeshttps://doi.org/10.1007/s00170-019-03734-xopenalex-snapshot

Orthogonal cutting mechanisms of CFRP/Ti6Al4V stacks

inferred← citeshttps://doi.org/10.1007/s00170-019-03753-8openalex-snapshot

An investigation of drilling high-strength CFRP composites using specialized drills

inferred← citeshttps://doi.org/10.1007/s00170-019-04842-4openalex-snapshot

Comparative analysis of wobble milling, helical milling and conventional drilling of CFRPs

inferred← citeshttps://doi.org/10.1007/s00170-020-04968-wopenalex-snapshot

Effect of fiber orientation angles on the material removal behavior of CFRP during cutting process by multi-scale characterization

inferred← citeshttps://doi.org/10.1007/s00170-021-06745-9openalex-snapshot

Mechanisms and evaluation of the influence of cutting temperature on the damage of CFRP by helical milling

inferred← citeshttps://doi.org/10.1007/s00170-021-07201-4openalex-snapshot

Effects of heat accumulation on the characteristics of hole wall temperature and damages in drilling of UD CFRP

inferred← citeshttps://doi.org/10.1007/s00170-021-08612-zopenalex-snapshot

Drilling of glare laminates: effect of cutting parameters on process forces and temperatures

inferred← citeshttps://doi.org/10.1007/s00170-022-10103-8openalex-snapshot

Thermal–mechanical characterization and drilling damage mechanism of triaxial braided composite

inferred← citeshttps://doi.org/10.1007/s00170-022-10112-7openalex-snapshot

Optimization of CFRP drilling process: a review

inferred← citeshttps://doi.org/10.1007/s00170-022-10645-xopenalex-snapshot

Simulation analysis of aramid fiber reinforced polymer hole machining and experimental study on delamination mechanism

inferred← citeshttps://doi.org/10.1007/s00170-023-12741-yopenalex-snapshot

Towards understanding the thermal characteristics of thermoplastic CF/PEEK composite drilling: heat transfer mechanism, crystallinity, and hole making performance

inferred← citeshttps://doi.org/10.1007/s00170-024-14773-4openalex-snapshot

Exploring the drilling behaviour of cold-sprayed hybrid metal-FRP structures: an experimental investigation

inferred← citeshttps://doi.org/10.1007/s00170-024-14984-9openalex-snapshot

Application of drill bit coatings for fiber/metal stack drilling in aircraft manufacturing: a comprehensive review

inferred← citeshttps://doi.org/10.1007/s12206-021-0329-2openalex-snapshot

Influence of fiber direction and processing parameters on drilling temperature of CFRP

inferred← citeshttps://doi.org/10.1007/s12206-025-0843-8openalex-snapshot

An experimental study on the influence of fiber layering direction on drilling quality of CFRP pipes

inferred← citeshttps://doi.org/10.1007/s12541-021-00596-wopenalex-snapshot

Recent Developments and Challenges on Machining of Carbon Fiber Reinforced Polymer Composite Laminates

inferred← citeshttps://doi.org/10.1007/s12541-024-01071-yopenalex-snapshot

A New Methodology for Drilling of Carbonfiber Reinforced Polymer Composite (CFRP) Material

inferred← citeshttps://doi.org/10.1007/s13399-024-06140-wopenalex-snapshot

Effect of drilling process parameters on agro-waste-based polymer composites reinforced with banana fiber and coconut shell filler

inferred← citeshttps://doi.org/10.1007/s40430-019-1892-7openalex-snapshot

Modeling and evolutionary computation on drilling of carbon fiber-reinforced polymer nanocomposite: an integrated approach using RSM based PSO

inferred← citeshttps://doi.org/10.1007/s40430-021-02839-3openalex-snapshot

Influence of cutting speed and tool geometry on form and machine tapping of carbon fibre-reinforced composites

inferred← citeshttps://doi.org/10.1007/s40430-022-03806-2openalex-snapshot

Optimization and alternative image processing approach for the comprehensive assessment of delamination and uncut fiber in drilling fiber metal laminate

inferred← citeshttps://doi.org/10.1007/s40430-023-04138-5openalex-snapshot

An experimental study on the drilling of CFRP sandwich structures with filled and unfilled aramid honeycomb cores

inferred← citeshttps://doi.org/10.1007/s40430-023-04339-yopenalex-snapshot

Dynamic mechanical and drilling behavior of Alstonia macrophylla fiber-reinforced polypropylene (PP) composites

inferred← citeshttps://doi.org/10.1016/b978-0-12-817452-4.00017-8openalex-snapshot

Machining of polymeric composite materials by water jet with abrasive

inferred← citeshttps://doi.org/10.1016/j.cja.2022.10.008openalex-snapshot

Defect suppression mechanism of ultrasonic vibration-assisted drilling carbon fiber/bismaleimide composite

inferred← citeshttps://doi.org/10.1016/j.compositesa.2019.105552openalex-snapshot

Advanced cutting tools and technologies for drilling carbon fibre reinforced polymer (CFRP) composites: A review

inferred← citeshttps://doi.org/10.1016/j.compositesa.2020.106259openalex-snapshot

Study on dedicated drill bit design for carbon fiber reinforced polymer drilling with improved cutting mechanism

inferred← citeshttps://doi.org/10.1016/j.compositesa.2024.108486openalex-snapshot

Investigation of the effect of symmetrical hybrid stacking on drilling machinability of unidirectional CFRP, GFRP and hybrid composites: Drilling tests and damage analysis

inferred← citeshttps://doi.org/10.1016/j.compositesa.2025.108856openalex-snapshot

Rapid fatigue life estimation of drilled CFRP laminates and titanium stacks using thermography

inferred← citeshttps://doi.org/10.1016/j.compositesa.2025.109250openalex-snapshot

Ultrasonic vibration-assisted machining in aerospace composite materials: Principle, technology, challenges

inferred← citeshttps://doi.org/10.1016/j.compositesb.2019.107698openalex-snapshot

Delamination formation and suppression during rotary ultrasonic elliptical machining of CFRP

inferred← citeshttps://doi.org/10.1016/j.compositesb.2020.107787openalex-snapshot

The effects of stacking sequence on drilling machinability of filament wound hybrid composite pipes: Part-1 mechanical characterization and drilling tests

inferred← citeshttps://doi.org/10.1016/j.compositesb.2021.109155openalex-snapshot

A critical review of the drilling of CFRP composites: Burr formation, characterisation and challenges

inferred← citeshttps://doi.org/10.1016/j.compositesb.2022.110381openalex-snapshot

Delamination measurement in glass fibre reinforced polymer (GFRP) composite based on image differencing

inferred← citeshttps://doi.org/10.1016/j.compositesb.2023.110589openalex-snapshot

A critical review on mechanical micro-drilling of glass and carbon fibre reinforced polymer (GFRP and CFRP) composites

inferred← citeshttps://doi.org/10.1016/j.compositesb.2025.112405openalex-snapshot

A comprehensive investigation into the influence of variation in the stacking sequence on the mechanical behaviour and drilling machinability of basalt fiber-reinforced composite tubes

inferred← citeshttps://doi.org/10.1016/j.compositesb.2025.113149openalex-snapshot

Numerical and experimental analysis of machinability aspects and surface damage in drilling MD-CFRP laminates

inferred← citeshttps://doi.org/10.1016/j.compositesb.2026.113725openalex-snapshot

Drilling CF/PEEK thermoplastic composite: Optimization of drill point angle and cutting parameters using nature-inspired hybrid optimization

inferred← citeshttps://doi.org/10.1016/j.compositesb.2026.113745openalex-snapshot

Enhancing CFRP hole-making quality via ultrasonic vibration-assisted bi-directional drilling

inferred← citeshttps://doi.org/10.1016/j.compositesb.2026.114001openalex-snapshot

Deformation-induced damage mechanism in drilling thin-walled CFRP: An experimental and numerical study

inferred← citeshttps://doi.org/10.1016/j.compstruct.2018.06.041openalex-snapshot

Investigation on delamination and flexural properties in drilling of carbon nanotube/polymer composites

inferred← citeshttps://doi.org/10.1016/j.compstruct.2018.06.051openalex-snapshot

Study of drilling-induced defects for CFRP composites using new criteria

inferred← citeshttps://doi.org/10.1016/j.compstruct.2018.10.016openalex-snapshot

Monitoring the drilling process of GFRP laminates with carbon nanotube buckypaper sensor

inferred← citeshttps://doi.org/10.1016/j.compstruct.2018.12.022openalex-snapshot

Effect of wall thickness and cutting parameters on drilling of glass microballoon/epoxy syntactic foam composites

inferred← citeshttps://doi.org/10.1016/j.compstruct.2019.02.099openalex-snapshot

Delamination formation, evaluation and suppression during drilling of composite laminates: A review

inferred← citeshttps://doi.org/10.1016/j.compstruct.2019.111312openalex-snapshot

Micro drilling of carbon fiber reinforced polymer

inferred← citeshttps://doi.org/10.1016/j.compstruct.2019.111456openalex-snapshot

Analysis of exit-ply temperature characteristics and their effects on occurrence of exit-ply damages during UD CFRP drilling

inferred← citeshttps://doi.org/10.1016/j.compstruct.2019.111638openalex-snapshot

Laser treatment surface: An innovative method to increase the adhesive bonding of ENF joints in CFRP

inferred← citeshttps://doi.org/10.1016/j.compstruct.2019.111661openalex-snapshot

Parametric study on drilling of GFRP composite pipe produced by filament winding process in different backup condition

inferred← citeshttps://doi.org/10.1016/j.compstruct.2019.111727openalex-snapshot

Comparative study of minimum quantity lubrication and dry drilling of CFRP/titanium stacks using TiAlN and diamond coated drills

inferred← citeshttps://doi.org/10.1016/j.compstruct.2019.111737openalex-snapshot

The effects of stacking sequence on drilling machinability of filament wound hybrid composite pipes: Part-2 damage analysis and surface quality

inferred← citeshttps://doi.org/10.1016/j.compstruct.2019.111803openalex-snapshot

Multi-objective optimization of CFRP drilling parameters with a hybrid method integrating the ANN, NSGA-II and fuzzy C-means

inferred← citeshttps://doi.org/10.1016/j.compstruct.2020.111994openalex-snapshot

The influence of machining processes on strain distribution and progressive failure characteristics when producing holes in CFRP

inferred← citeshttps://doi.org/10.1016/j.compstruct.2020.112670openalex-snapshot

Effect of a Ti alloy layer on CFRP hole quality during helical milling of CFRP/Ti laminate

inferred← citeshttps://doi.org/10.1016/j.compstruct.2020.113274openalex-snapshot

Identification and estimation of defects in high-speed ground C/SiC ceramic matrix composites

inferred← citeshttps://doi.org/10.1016/j.compstruct.2021.113562openalex-snapshot

Effect of cutting parameters on thrust force, torque, hole quality and dust generation during drilling of GLARE 2B laminates

inferred← citeshttps://doi.org/10.1016/j.compstruct.2022.115594openalex-snapshot

A critical review addressing drilling-induced damage of CFRP composites

inferred← citeshttps://doi.org/10.1016/j.compstruct.2022.115700openalex-snapshot

Damage mechanism of carbon fiber reinforced plastic pipe based on reverse and forward curvature drilling

inferred← citeshttps://doi.org/10.1016/j.compstruct.2022.115701openalex-snapshot

Damage mechanism of carbon-fiber-reinforced-plastic pipe based on reverse and forward curvature drilling

inferred← citeshttps://doi.org/10.1016/j.compstruct.2022.115913openalex-snapshot

A review on drilling of FML stacks with conventional and unconventional processing methods under different conditions

inferred← citeshttps://doi.org/10.1016/j.compstruct.2022.116023openalex-snapshot

Prediction model of chisel edge thrust force and material damage mechanism for interlaminar-direction drilling of UD-CFRP composite laminates

inferred← citeshttps://doi.org/10.1016/j.compstruct.2024.118764openalex-snapshot

A comparative study on drilling characteristics of unidirectional thermosetting CF/epoxy and thermoplastic CF/PEEK composites

inferred← citeshttps://doi.org/10.1016/j.dt.2019.05.015openalex-snapshot

Effect of operating temperature on aged single lap bonded joints

inferred← citeshttps://doi.org/10.1016/j.dt.2020.09.009openalex-snapshot

Experimental investigation for machinability aspects of graphene oxide/carbon fiber reinforced polymer nanocomposites and predictive modeling using hybrid approach

inferred← citeshttps://doi.org/10.1016/j.ijadhadh.2025.104075openalex-snapshot

Laser treatment design for CFRP bonding: an innovative approach to reduce process time

inferred← citeshttps://doi.org/10.1016/j.jallcom.2020.154058openalex-snapshot

Study on damage in carbon fiber reinforced plastic drilling using step cutting mechanism drill

inferred← citeshttps://doi.org/10.1016/j.jcomc.2025.100636openalex-snapshot

Fibre-orientation-driven defect probability mapping for machining-induced delamination and burr minimisation in carbon fibre-reinforced polymer (CFRP) composites

inferred← citeshttps://doi.org/10.1016/j.jestch.2019.10.002openalex-snapshot

Multi-response optimization of carbon fiber reinforced polymer (CFRP) drilling using back propagation neural network-particle swarm optimization (BPNN-PSO)

inferred← citeshttps://doi.org/10.1016/j.jmapro.2019.02.006openalex-snapshot

Influence of flute number and stepped bit geometry when drilling CFRP/Ti6Al4V stacks

inferred← citeshttps://doi.org/10.1016/j.jmapro.2019.02.028openalex-snapshot

Quality monitoring and control for drilling of CFRP laminates

inferred← citeshttps://doi.org/10.1016/j.jmapro.2020.08.071openalex-snapshot

Effects of axial and longitudinal-torsional vibration on fiber removal in ultrasonic vibration helical milling of CFRP composites

inferred← citeshttps://doi.org/10.1016/j.jmapro.2021.06.054openalex-snapshot

The effects of back-up on drilling machinability of filament wound GFRP composite pipes: Mechanical characterization and drilling tests

inferred← citeshttps://doi.org/10.1016/j.jmapro.2025.12.039openalex-snapshot

Effects of short glass fibre reinforcement on the machinability of PEEK polymer based on cutting force monitoring and geometric control

inferred← citeshttps://doi.org/10.1016/j.jmatprotec.2019.03.001openalex-snapshot

Experimental study on drilling load and hole quality during rotary ultrasonic helical machining of small-diameter CFRP holes

inferred← citeshttps://doi.org/10.1016/j.jmatprotec.2019.116291openalex-snapshot

Drill bit with a helical groove edge for clean drilling of carbon fiber-reinforced plastic

inferred← citeshttps://doi.org/10.1016/j.jmrt.2023.05.023openalex-snapshot

A review on CFRP drilling: fundamental mechanisms, damage issues, and approaches toward high-quality drilling

inferred← citeshttps://doi.org/10.1016/j.jmrt.2023.10.183openalex-snapshot

Improving hole quality of thick CFRP laminates through a laser-mechanical compound drilling process

inferred← citeshttps://doi.org/10.1016/j.matpr.2019.07.434openalex-snapshot

CFRP Machining on Indigenously Developing Cryogenic Machining Facility: An Initial Study

inferred← citeshttps://doi.org/10.1016/j.matpr.2020.03.222openalex-snapshot

Effect of drilling parameters on Delamination of Kevlar laminate

inferred← citeshttps://doi.org/10.1016/j.polymertesting.2019.02.011openalex-snapshot

New nonlinear regression modeling and multi-objective optimization of cutting parameters in drilling of GFRE composites to minimize delamination

inferred← citeshttps://doi.org/10.1016/j.polymertesting.2026.109350openalex-snapshot

Influence of drilling-induced delamination on flexural load-carrying capacity of open-hole woven GFRPs: Experiments and mesoscale modeling

inferred← citeshttps://doi.org/10.1016/j.procir.2020.02.089openalex-snapshot

Multilayer structure dependent performance behaviour of CVD diamond thin film drilling tools during CFRP machining

inferred← citeshttps://doi.org/10.1016/j.procir.2022.03.116openalex-snapshot

Effect of Tool Geometry and LCO2 Cooling on Cutting Forces and Delamination when Drilling CFRP Composites Using PCD Tools

inferred← citeshttps://doi.org/10.1016/j.procir.2023.06.142openalex-snapshot

Drilling-induced delamination measurement using a novel digital image processing algorithm

inferred← citeshttps://doi.org/10.1016/j.promfg.2021.07.045openalex-snapshot

Drilling of carbon fibre reinforced polymer (CFRP) composites: Difficulties, challenges and expectations

inferred← citeshttps://doi.org/10.1016/j.prostr.2018.06.017openalex-snapshot

Experimental investigation of hydrothermal ageing on single lap bonded CFRP joints

inferred← citeshttps://doi.org/10.1016/j.tws.2021.108279openalex-snapshot

Experimental evaluation and modelling of drilling responses in CFRP/honeycomb composite sandwich panels

inferred← citeshttps://doi.org/10.1016/j.tws.2023.111086openalex-snapshot

Multi-objective optimization for the machining performance during ultrasonic vibration-assisted helical grinding hole of thin-walled CF/BMI composite laminates

inferred← citeshttps://doi.org/10.1016/j.ymssp.2025.112499openalex-snapshot

Minimum sufficient signal condition of identifying process incidence in stacked drilling through deep learning

inferred← citeshttps://doi.org/10.1063/5.0077563openalex-snapshot

The effect of machine process in two flute endmill feeding rate on delamination in carbon fiber reinforced polymer materials

inferred← citeshttps://doi.org/10.1080/00218464.2020.1758074openalex-snapshot

CFRP laser texturing to increase the adhesive bonding: morphological analysis of treated surfaces

inferred← citeshttps://doi.org/10.1080/10426914.2023.2165667openalex-snapshot

An investigation of basalt/E-glass hybrid composite pipe on drilling using Box–Behnken design

inferred← citeshttps://doi.org/10.1080/10426914.2023.2187826openalex-snapshot

Optimization of parameters for drilling composite materials with freeform surfaces

inferred← citeshttps://doi.org/10.1080/10910344.2025.2475484openalex-snapshot

Comprehensive review of drilling strategies for CFRP/Ti stacks in aircraft manufacturing

inferred← citeshttps://doi.org/10.1080/14484846.2021.1913851openalex-snapshot

Damage free drilling of carbon fibre reinforced composites – a review

inferred← citeshttps://doi.org/10.1080/23311916.2021.1941588openalex-snapshot

A review on strengthening, delamination formation and suppression techniques during drilling of CFRP composites

inferred← citeshttps://doi.org/10.1088/1757-899x/448/1/012003openalex-snapshot

Direct monitoring of hole damage in carbon fibre-reinforced polymer (CFRP) composites

inferred← citeshttps://doi.org/10.1088/2053-1591/ab2617openalex-snapshot

Optimization and prediction of thrust force, vibration and delamination in drilling of functionally graded composite using Taguchi, ANOVA and ANN analysis

inferred← citeshttps://doi.org/10.1088/2053-1591/ad3522openalex-snapshot

Optimization of drilling parameters on delamination and burr formation in drilling of neat CFRP and hybrid CFRP nano-composites

inferred← citeshttps://doi.org/10.1088/2631-8695/ae950copenalex-snapshot

Experimental and statistical investigation of drilling forces and energy consumption in kenaf fiber-reinforced epoxy composites

inferred← citeshttps://doi.org/10.1139/tcsme-2022-0150openalex-snapshot

The effect of piercing and drilling processes on burr formation and delamination of aged carbon and aramid fiber-reinforced polymer composites

inferred← citeshttps://doi.org/10.1142/s0218625x21500827openalex-snapshot

A NEW CRITERION FOR DRILLING MACHINABILITY EVALUATION OF NANOCOMPOSITES MODIFIED BY GRAPHENE/CARBON FIBER EPOXY MATRIX AND OPTIMIZATION USING COMBINED COMPROMISE SOLUTION

inferred← citeshttps://doi.org/10.1142/s0218625x21501122openalex-snapshot

EVALUATION OF THE EFFECTS OF DRILLING PARAMETERS, TOOL GEOMETRY AND CORE MATERIAL THICKNESS ON THRUST FORCE AND DELAMINATION IN THE DRILLING OF SANDWICH COMPOSITES

inferred← citeshttps://doi.org/10.1142/s1756973721500098openalex-snapshot

Investigation on Thrust and Torque Generation During Drilling of Hybrid Laminates Composite with Different Stacking Sequences Using Multiobjective Optimization Module

inferred← citeshttps://doi.org/10.1177/0021998320947143openalex-snapshot

Effects of cutting temperature and process optimization in drilling of GFRP composites

inferred← citeshttps://doi.org/10.1177/00219983211009281openalex-snapshot

Delamination and hole wall roughness evaluation in air-cooled drilling of carbon fiber-reinforced polymer

inferred← citeshttps://doi.org/10.1177/00219983221134159openalex-snapshot

Experimental investigation of the effective parameters and performance of different types of structural tools in drilling CFRP/AL alloy stacks

inferred← citeshttps://doi.org/10.1177/00219983241268861openalex-snapshot

Carbon fibre detection in polymer composites reinforced by chopped carbon fibres through digital image processing and machine learning

inferred← citeshttps://doi.org/10.1177/00219983261442038openalex-snapshot

Drilling-induced damage and thermal–mechanical response of graphene nanoplatelet–modified CFRP composites under high-speed conditions

inferred← citeshttps://doi.org/10.1177/00219983261458006openalex-snapshot

A review for CFRP riveting applications and technology in aircraft structures

inferred← citeshttps://doi.org/10.1177/0731684420956724openalex-snapshot

Drill bit with clip-edges based on the force control model for reducing the CFRP damage

inferred← citeshttps://doi.org/10.1177/07316844221122041openalex-snapshot

An Experimental Comprehensive Analysis of Drilling Carbon Fiber Reinforced Plastic Tubes and Comparison With Carbon Fiber Reinforced Plastic Plate

inferred← citeshttps://doi.org/10.1177/07316844231218942openalex-snapshot

The effects of support plate thickness on the drilling machinability of CFRP

inferred← citeshttps://doi.org/10.1177/07316844231225593openalex-snapshot

Burr constitution analysis in ultrasonic-assisted drilling of CFRP/nano-graphene via experimental and data-driven methodologies

inferred← citeshttps://doi.org/10.1177/07316844251318859openalex-snapshot

Effect of solution-blown polyamide-6 nanofiber interlayer on drilling performance of carbon fiber reinforced composites

inferred← citeshttps://doi.org/10.1177/07316844261445665openalex-snapshot

Experimental investigation and optimization of abrasive water jet drilling parameters for CF/PEEK thermoplastic composites

inferred← citeshttps://doi.org/10.1177/09544054241238477openalex-snapshot

Numerical and theoretical approach to evaluate the clamping force and the interlayer gap extent during drilling of stacked materials

inferred← citeshttps://doi.org/10.1177/09544062221110466openalex-snapshot

An experimental investigation on the influence of different surface curvatures in drilling machinability of carbon fiber reinforced plastic

inferred← citeshttps://doi.org/10.1177/09544089241230160openalex-snapshot

Investigation on carbon fiber-reinforced polymer combined with graphene nanoparticles subjected to drilling operation using response surface methodology and non-dominated sorting genetic algorithm-II

inferred← citeshttps://doi.org/10.1177/09673911211020620openalex-snapshot

A comparative study of mechanical and machining performance of polymer hybrid and carbon fiber epoxy composite materials

inferred← citeshttps://doi.org/10.1177/16878132261442322openalex-snapshot

Effect of post-printing annealing on the tensile behavior of stainless-steel wire mesh–reinforced PLA composites fabricated using material extrusion

inferred← citeshttps://doi.org/10.1515/mt-2022-0280openalex-snapshot

Cutting parameters optimization of hybrid fiber composite during drilling

inferred← citeshttps://doi.org/10.21062/mft.2021.050openalex-snapshot

Experimental Investigations Towards Hole Accuracy in Micro-drilling of Carbon Fibre Reinforced Polymer Material

inferred← citeshttps://doi.org/10.21203/rs.3.rs-2634853/v1openalex-snapshot

Theoretical and numerical model to study the interlayer gap phenomenon during robotic one shot drilling of stacked materials

inferred← citeshttps://doi.org/10.2139/ssrn.5362601openalex-snapshot

A Modelling Study On Debonding Behaviours with Fibre-Matrix Normal-Tangential Constraining Interaction During Cfrp Cutting

inferred← citeshttps://doi.org/10.2139/ssrn.5813514openalex-snapshot

CNF Effects in CFRP under HCl/NaOH: Drilling Parameters, Delamination Maps, and Mechanical Performance

inferred← citeshttps://doi.org/10.3221/igf-esis.45.15openalex-snapshot

Influence of hydrothermal ageing on single lap bonded CFRP joints

inferred← citeshttps://doi.org/10.3390/books978-3-03921-103-6openalex-snapshot

Carbon Fibers and Their Composite Materials

inferred← citeshttps://doi.org/10.3390/coatings13081440openalex-snapshot

Study of the Influence of Tool Wear of Two Drill Bits Manufactured with Different Coating Processes in Drilling Carbon/Glass Fiber Hybrid Composite Bounded with Epoxy Polymer

inferred← citeshttps://doi.org/10.3390/coatings16020204openalex-snapshot

Drilling Defects and Process Optimization in Carbon Fiber-Reinforced Polymer Composites: A Review

inferred← citeshttps://doi.org/10.3390/jcs7020046openalex-snapshot

Drilling Response of Carbon Fabric/Solid Lubricant Filler/Epoxy Hybrid Composites: An Experimental Investigation

inferred← citeshttps://doi.org/10.3390/jmmp2030046openalex-snapshot

Process Forces Analysis and a New Feed Control Strategy for Drilling of Unidirectional Carbon Fiber Reinforced Plastics (UD-CFRP)

inferred← citeshttps://doi.org/10.3390/ma11081276openalex-snapshot

Tool Wear Mechanism in Cutting of Stack CFRP/UNS A97075

inferred← citeshttps://doi.org/10.3390/ma11101974openalex-snapshot

Investigation on an Innovative Method for High-Speed Low-Damage Micro-Cutting of CFRP Composites with Diamond Dicing Blades

inferred← citeshttps://doi.org/10.3390/ma12010107openalex-snapshot

Influence of Abrasive Waterjet Parameters on the Cutting and Drilling of CFRP/UNS A97075 and UNS A97075/CFRP Stacks

inferred← citeshttps://doi.org/10.3390/ma15093392openalex-snapshot

Modeling Evolution of Cutting Force in Ultrasonically Assisted Drilling of Carbon Fiber Reinforced Plastics

inferred← citeshttps://doi.org/10.3390/ma16051796openalex-snapshot

Study on Optimization of Drilling Parameters for Laminated Composite Materials

inferred← citeshttps://doi.org/10.3390/machines12010022openalex-snapshot

Research on Damage Caused by Carbon-Fiber-Reinforced Polymer Robotic Drilling Based on Digital Image Correlation and Industrial Computed Tomography

inferred← citeshttps://doi.org/10.3390/machines12110783openalex-snapshot

Prediction of Delamination Defects in Drilling of Carbon Fiber Reinforced Polymers Using a Regression-Based Approach

inferred← citeshttps://doi.org/10.3390/polym12102252openalex-snapshot

Mechanical Joining of Fibre Reinforced Polymer Composites to Metals—A Review. Part I: Bolted Joining

inferred← citeshttps://doi.org/10.3390/polym14102084openalex-snapshot

Heat Analysis of Thermal Conductive Polymer Composites: Reference Temperature History in Pure Polymer Matrices

inferred← citeshttps://doi.org/10.33927/hjic-2021-20openalex-snapshot

Mechanical Deburring of Drilling-Induced Exit Burrs in Carbon Fibre Reinforced Polymer Composites

inferred← citeshttps://doi.org/10.36897/jme/119640openalex-snapshot

Wear Evaluation of CVD Diamond Coated High-Performance Drilling Tools for Machining of Carbon Fiber Rreinforced Plastics (CFRP)

inferred← citeshttps://doi.org/10.3901/jme.2021.03.255openalex-snapshot

Study on Critical Feed Rate of Delamination Based on Thrust Force of Chisel Edge during CFRP Drilling

inferred← citeshttps://doi.org/10.4028/www.scientific.net/kem.813.346openalex-snapshot

Increasing of ENF Bonded Joints Performance by Design of Laser Surface Texturing

inferred← citeshttps://doi.org/10.4325/seikeikakou.33.235openalex-snapshot

Structure Property: Joining Techniques for CFRP

inferred← citeshttps://doi.org/10.52693/jsas.1432520openalex-snapshot

Elyaf Metal Tabakalı (FML) Kompozitlerin Delinmesinde Ortalama İtme Kuvveti ve Delaminasyon Faktörü Üzerinde İşleme Parametrelerinin Etkilerinin Değerlendirilmesi ve ARAS Yöntemiyle Çok Kriterli Optimizasyonu

inferred← citeshttps://doi.org/10.5281/zenodo.39880openalex-snapshot

Objetive Video Quality Metrics: A Performance Analysis

inferred← citeshttps://doi.org/10.5281/zenodo.58656openalex-snapshot

Stability Of Visco-Elastic( Rivlin-Ericksen) Compressible Fluid In Porous Medium : Effect Of Magnetic Field

inferred← citeshttps://doi.org/10.5937/fme2102356eopenalex-snapshot

Multi-objective optimization of process parameters for drilling fibermetal laminate using a hybrid GRA-PCA approach

inferred← citeshttps://doi.org/10.5937/fme2104950eopenalex-snapshot

An experimental study on hole quality and different delamination approaches in the drilling of CARALL, a new FML composite

inferred← citeshttps://doi.org/10.5937/fme2404573popenalex-snapshot

Investigation of the effect of drilling induced delamination and tool wear on residual strength in polymer nanocomposites

inferred← citeshttps://doi.org/10.7736/kspe.2018.35.3.253openalex-snapshot

Mechanical Cutting Process Trends for Difficult-to-Cut Materials : A Review

Editorial review for independent work. ICSAC — the Institute for Complexity Science and Advanced Computing — runs a structured editorial panel for researchers publishing outside journals, and publishes on CiteStamp rails. Submission is free and goes through ORCID: icsacinstitute.org/submit.