On the public citation graph
DEM/FEM simulation of the shot peening process on sharp notches
0 signed · 94 inferred · view as graph
Inferred edges come from two machine sources: sweeps of open repository metadata (mostly SSRN and Zenodo), and a bulk OpenAlex citation snapshot. Every row below is labelled with the one it came from. Neither is a complete citation index — absence here is not evidence of absence.
Is this your work? Sign in with ORCID and put your name on the
claims that are yours.
Reference health. See whether every reference in this work resolves to a
known work and none has been retracted — and get a dated CiteStamped
badge you can embed.
What this work says
Outgoing claims: the papers this work cites, builds on, or argues with.
inferredcites →https://doi.org/10.1002/adem.201801140openalex-snapshot
Enhancing the Structural Performance of Lightweight Metals by Shot Peening
inferredcites →https://doi.org/10.1007/s10999-013-9236-8openalex-snapshot
3D FE modeling of oblique shot peening using a new periodic cell
inferredcites →https://doi.org/10.1007/s11340-016-0182-xopenalex-snapshot
High Spatial Resolution Evaluation of Residual Stresses in Shot Peened Specimens Containing Sharp and Blunt Notches by Micro-hole Drilling, Micro-slot Cutting and Micro-X-ray Diffraction Methods
inferredcites →https://doi.org/10.1016/0043-1648(84)90021-8openalex-snapshot
Friction and wear of partially stabilized zirconia: Basic science and practical applications
inferredcites →https://doi.org/10.1016/0043-1648(89)90281-0openalex-snapshot
Interpretations of the sliding friction break-in curves of alumina-aluminum couples
inferredcites →https://doi.org/10.1016/j.actamat.2004.08.031openalex-snapshot
Finite element modeling of the surface roughness of 5052 Al alloy subjected to a surface severe plastic deformation process
inferredcites →https://doi.org/10.1016/j.actamat.2015.06.054openalex-snapshot
Experimental assessment and simulation of surface nanocrystallization by severe shot peening
inferredcites →https://doi.org/10.1016/j.addma.2018.03.030openalex-snapshot
On the effect of shot-peening on fatigue resistance of AlSi10Mg specimens fabricated by additive manufacturing using selective laser melting (AM-SLM)
inferredcites →https://doi.org/10.1016/j.advengsoft.2009.03.013openalex-snapshot
On the potential applications of a 3D random finite element model for the simulation of shot peening
inferredcites →https://doi.org/10.1016/j.advengsoft.2014.09.001openalex-snapshot
A combined DEM–FEM numerical method for Shot Peening parameter optimisation
inferredcites →https://doi.org/10.1016/j.advengsoft.2017.06.011openalex-snapshot
Simulation of the shot peening process with variable shot diameters and impacting velocities
inferredcites →https://doi.org/10.1016/j.apsusc.2012.07.017openalex-snapshot
On the shot peening surface coverage and its assessment by means of finite element simulation: A critical review and some original developments
inferredcites →https://doi.org/10.1016/j.apsusc.2013.10.131openalex-snapshot
Application of different fatigue strength criteria to shot peened notched components. Part 1: Fracture Mechanics based approaches
inferredcites →https://doi.org/10.1016/j.cma.2017.03.005openalex-snapshot
Eigenstrain reconstruction of residual strains in an additively manufactured and shot peened nickel superalloy compressor blade
inferredcites →https://doi.org/10.1016/j.engfailanal.2007.11.017openalex-snapshot
A numerical simulation to relate the shot peening parameters to the induced residual stresses
inferredcites →https://doi.org/10.1016/j.engfracmech.2012.09.014openalex-snapshot
Fatigue behavior of nitrided and shot peened steel with artificial small surface defects
inferredcites →https://doi.org/10.1016/j.engfracmech.2012.12.007openalex-snapshot
The Theory of Critical Distances to estimate finite lifetime of notched components subjected to constant and variable amplitude torsional loading
inferredcites →https://doi.org/10.1016/j.ijfatigue.2008.11.017openalex-snapshot
Reverse bending fatigue of shot peened 7075-T651 aluminium alloy: The role of residual stress relaxation
inferredcites →https://doi.org/10.1016/j.ijfatigue.2010.02.012openalex-snapshot
Notch fatigue behaviour of shot peened high-strength aluminium alloys: Experiments and predictions using a critical distance method
inferredcites →https://doi.org/10.1016/j.ijfatigue.2013.04.016openalex-snapshot
Fatigue behaviour of geometric features subjected to laser shock peening: Experiments and modelling
inferredcites →https://doi.org/10.1016/j.ijfatigue.2014.07.002openalex-snapshot
High- and very high-cycle plain fatigue resistance of shot peened high-strength aluminum alloys: The role of surface morphology
inferredcites →https://doi.org/10.1016/j.ijfatigue.2016.01.020openalex-snapshot
Residual stresses reconstruction in shot peened specimens containing sharp and blunt notches by experimental measurements and finite element analysis
inferredcites →https://doi.org/10.1016/j.ijfatigue.2016.08.015openalex-snapshot
On the combination of the critical distance theory with a multiaxial fatigue criterion for predicting the fatigue strength of notched and plain shot-peened parts
inferredcites →https://doi.org/10.1016/j.ijfatigue.2017.05.023openalex-snapshot
A numerical study of the effects of shot peening on the short crack growth behaviour in notched geometries under bending fatigue tests
inferredcites →https://doi.org/10.1016/j.ijfatigue.2020.105497openalex-snapshot
Improved fatigue strength of additively manufactured Ti6Al4V by surface post processing
inferredcites →https://doi.org/10.1016/j.ijfatigue.2020.105621openalex-snapshot
Characterization of shot peening properties and modelling on the fatigue performance of 304 austenitic stainless steel
inferredcites →https://doi.org/10.1016/j.ijfatigue.2020.105630openalex-snapshot
Evolution of surface integrity and fatigue properties after milling, polishing, and shot peening of TC17 alloy blades
inferredcites →https://doi.org/10.1016/j.ijfatigue.2020.105728openalex-snapshot
Incorporating residual stresses into a Strain-Energy-Density based fatigue criterion and its application to the assessment of the medium-to-very-high-cycle fatigue strength of shot-peened parts
inferredcites →https://doi.org/10.1016/j.ijmecsci.2016.01.005openalex-snapshot
Robust methodology to simulate real shot peening process using discrete-continuum coupling method
inferredcites →https://doi.org/10.1016/j.ijmecsci.2018.06.023openalex-snapshot
Discrete element-periodic cell coupling model and investigations on shot stream expansion, Almen intensities and target materials
inferredcites →https://doi.org/10.1016/j.ijmecsci.2019.105327openalex-snapshot
A new challenge in the DEM/FEM simulation of the shot peening process: The residual stress field at a sharp edge
inferredcites →https://doi.org/10.1016/j.jmatprotec.2005.02.139openalex-snapshot
A three-dimensional simulation of shot peening process using multiple shot impacts
inferredcites →https://doi.org/10.1016/j.jmatprotec.2010.07.016openalex-snapshot
Experimental study of shot peening and stress peen forming
inferredcites →https://doi.org/10.1016/j.jmatprotec.2018.08.019openalex-snapshot
Effects of rolled edges on the fatigue life of shot peened Inconel 718
inferredcites →https://doi.org/10.1016/j.jmbbm.2017.03.024openalex-snapshot
The effect of post-sintering treatments on the fatigue and biological behavior of Ti-6Al-4V ELI parts made by selective laser melting
inferredcites →https://doi.org/10.1016/j.msea.2014.06.118openalex-snapshot
Residual stress redistribution in shot peened samples subject to mechanical loading
inferredcites →https://doi.org/10.1016/j.surfcoat.2010.05.035openalex-snapshot
A numerical model of severe shot peening (SSP) to predict the generation of a nanostructured surface layer of material
inferredcites →https://doi.org/10.1016/j.surfcoat.2011.03.080openalex-snapshot
Numerical modelling of shot peening process and corresponding products: Residual stress, surface roughness and cold work prediction
inferredcites →https://doi.org/10.1016/j.surfcoat.2012.03.057openalex-snapshot
An approach to relate shot peening finite element simulation to the actual coverage
inferredcites →https://doi.org/10.1016/j.surfcoat.2012.12.046openalex-snapshot
Experimental and numerical investigation of material heterogeneity in shot peened aluminium alloy AA2024-T351
inferredcites →https://doi.org/10.1016/j.surfcoat.2014.07.075openalex-snapshot
Influence of the target material constitutive model on the numerical simulation of a shot peening process
inferredcites →https://doi.org/10.1016/j.surfcoat.2017.03.035openalex-snapshot
A sequential DEM-FEM coupling method for shot peening simulation
inferredcites →https://doi.org/10.1016/j.surfcoat.2017.04.054openalex-snapshot
Surface layer modifications of micro-shot-peened Al-7075-T651: Experiments and stochastic numerical simulations
inferredcites →https://doi.org/10.1016/j.tafmec.2014.06.012openalex-snapshot
A model to predict fretting fatigue life including residual stresses
inferredcites →https://doi.org/10.1016/j.wear.2006.12.079openalex-snapshot
Friction and wear behavior of structural ceramics sliding against zirconia
inferredcites →https://doi.org/10.1016/s0043-1648(97)00041-0openalex-snapshot
Start up and steady state friction of alumina against alumina
inferredcites →https://doi.org/10.1016/s0142-1123(01)00132-3openalex-snapshot
Investigation of residual stress relaxation under cyclic load
inferredcites →https://doi.org/10.1016/s0142-1123(02)00034-8openalex-snapshot
Influence of shot peening on bending tooth fatigue limit of case hardened gears
inferredcites →https://doi.org/10.1016/s0142-1123(98)00002-4openalex-snapshot
Mechanism of creation of compressive residual stress by shot peening
inferredcites →https://doi.org/10.1016/s0142-1123(99)00007-9openalex-snapshot
Geometrical effects in fatigue: a unifying theoretical model
inferredcites →https://doi.org/10.1016/s0168-874x(98)00057-2openalex-snapshot
Three-dimensional dynamic finite element analysis of shot-peening induced residual stresses
inferredcites →https://doi.org/10.1016/s0734-743x(01)00043-4openalex-snapshot
3D FE analysis of peening of strain-rate sensitive materials using multiple impingement model
inferredcites →https://doi.org/10.1016/s0921-5093(98)01121-6openalex-snapshot
Cyclic deformation and near surface microstructures of shot peened or deep rolled austenitic stainless steel AISI 304
inferredcites →https://doi.org/10.1016/s0924-0136(00)00893-1openalex-snapshot
Relating Almen intensity to residual stresses induced by shot peening: a numerical approach
inferredcites →https://doi.org/10.1061/(asce)0733-9399(1993)119:3(642.2)openalex-snapshot
Mechanics of Solid Materials
inferredcites →https://doi.org/10.1063/1.3295300openalex-snapshot
CONSTITUTIVE MODEL CONSTANTS FOR Al7075-T651 and Al7075-T6
inferredcites →https://doi.org/10.1080/02670844.2016.1192336openalex-snapshot
Shot peening coverage effect on residual stress profile by FE random impact analysis
inferredcites →https://doi.org/10.1111/ffe.12051openalex-snapshot
A new method for modelling the support effect under rotating bending fatigue: application to Ti‐6Al‐4V alloy, with and without shot peening
inferredcites →https://doi.org/10.1111/ffe.13367openalex-snapshot
Fretting‐fatigue analysis of shot‐peened aluminium and titanium test specimens
inferredcites →https://doi.org/10.1111/j.1460-2695.1987.tb00205.xopenalex-snapshot
THE EFFECT OF RESIDUAL STRESSES INDUCED BY SHOT‐PEENING ON FATIGUE CRACK PROPAGATION IN TWO HIGH STRENGTH ALUMINIUM ALLOYS
inferredcites →https://doi.org/10.1111/j.1460-2695.1992.tb01262.xopenalex-snapshot
AN ANALYSIS OF STRESS CONCENTRATIONS CAUSED BY SHOT PEENING AND ITS APPLICATION IN PREDICTING FATIGUE STRENGTH
inferredcites →https://doi.org/10.1115/1.2712469openalex-snapshot
Development and Validation of Novel FE Models for 3D Analysis of Peening of Strain-Rate Sensitive Materials
inferredcites →https://doi.org/10.1115/1.3184083openalex-snapshot
Numerical Simulation of Residual Stress Relaxation in Shot Peened High-Strength Aluminum Alloys Under Reverse Bending Fatigue
inferredcites →https://doi.org/10.1115/1.4003113openalex-snapshot
High Strain Rate Tensile Behavior of Aluminum Alloy 7075 T651 and IS 2062 Mild Steel
inferredcites →https://doi.org/10.1177/0954406219841650openalex-snapshot
Investigations on the tooth root bending strength and the fatigue fracture characteristics of case-carburized and shot-peened gears of different sizes
inferredcites →https://doi.org/10.1179/026708301101509980openalex-snapshot
Residual stress. Part 1 – Measurement techniques
inferredcites →https://doi.org/10.1557/jmr.2017.358openalex-snapshot
Improvement of notch fatigue properties of ultra-high CM400 maraging steel through shot peening
inferredcites →https://doi.org/10.3390/met10091262openalex-snapshot
Effect of Severe Shot Peening on the Very-High Cycle Notch Fatigue of an AW 7075 Alloy
What points at this work
Incoming claims: where this work appears in other papers’ reference lists and arguments.
inferred← citeshttps://doi.org/10.2139/ssrn.4525244openalex-extracted
Study on Surface Properties and Strengthening Mechanism of Polycrystalline Iron after Fine Particle Peening in Nanoscale
inferred← citeshttps://doi.org/10.1007/s00170-023-10875-7openalex-snapshot
Analysis of residual stress of gear tooth root after shot peening process
inferred← citeshttps://doi.org/10.1007/s00170-026-18329-6openalex-snapshot
Research progress on the effect of shot peening on bending fatigue life and machine vision-based non-destructive testing
inferred← citeshttps://doi.org/10.1007/s10853-025-11659-yopenalex-snapshot
Atomistic investigation on the correlation between shot peening impact energy and grain microstructure
inferred← citeshttps://doi.org/10.1016/j.cja.2024.01.019openalex-snapshot
High-precision simulation and experimental verification of residual stress and surface topography of cylindrical surface shot peening
inferred← citeshttps://doi.org/10.1016/j.engfracmech.2022.108917openalex-snapshot
State-Based peridynamics for thermomechanical modeling of fracture mechanisms in nuclear fuel pellets
inferred← citeshttps://doi.org/10.1016/j.ijfatigue.2023.107713openalex-snapshot
Elastic–plastic analysis of high load ratio fatigue tests on a shot-peened quenched and tempered steel, combining the Chaboche model and the Theory of Critical Distances
inferred← citeshttps://doi.org/10.1016/j.ijmecsci.2022.107688openalex-snapshot
Modelling residual stress and residual work hardening induced by surface mechanical attrition treatment
inferred← citeshttps://doi.org/10.1016/j.ijmecsci.2023.108723openalex-snapshot
Physical multi-factor driven nonlinear superposition for machining deformation reconstruction
inferred← citeshttps://doi.org/10.1016/j.ijmecsci.2024.109520openalex-snapshot
Shot peening coverage effect on laser powder bed fused steel
inferred← citeshttps://doi.org/10.1016/j.ijsolstr.2026.114032openalex-snapshot
Prediction of USP-induced gradient nanostructuring: A novel DEM-FEM coupling approach using probability distribution function
inferred← citeshttps://doi.org/10.1016/j.jallcom.2025.182861openalex-snapshot
Local strain field evolution at shot-peened 7075 Al-base notches upon tensile loading using in-situ synchrotron X-ray µ-diffraction
inferred← citeshttps://doi.org/10.1016/j.jmapro.2023.12.003openalex-snapshot
A combined DEM-FEM method for simulating the actual peen forming process to estimate forming effectiveness
inferred← citeshttps://doi.org/10.1016/j.jmapro.2024.08.041openalex-snapshot
A sequential DEM-FEM coupling method to predict the ultrasonic shot peening of fir-tree shaped grooves in aero-engine turbine disk
inferred← citeshttps://doi.org/10.1016/j.matdes.2025.115353openalex-snapshot
Scalable numerical method for predicting shot peening residual stresses considering the effect of previous residual stress states
inferred← citeshttps://doi.org/10.1016/j.mtcomm.2025.114242openalex-snapshot
A review of side effects induced by shot peening
inferred← citeshttps://doi.org/10.1016/j.surfcoat.2022.128943openalex-snapshot
Surface integrity of gear shot peening considering complex geometric conditions: A sequential coupled DEM-FEM method
inferred← citeshttps://doi.org/10.1016/j.surfcoat.2025.131977openalex-snapshot
A fluid-solid coupled model for particle velocity and validation in spiral bevel gear shot peening
inferred← citeshttps://doi.org/10.1016/j.tws.2022.109985openalex-snapshot
A novel genetic expression programming assisted calibration strategy for discrete element models of composite joints with ductile adhesives
inferred← citeshttps://doi.org/10.1038/s41598-023-32563-yopenalex-snapshot
New design for control cage to enhance coverage and uniformity of shot blasting and its validation using DEM and experiment
inferred← citeshttps://doi.org/10.1063/5.0217647openalex-snapshot
A coupled computational fluid dynamics-discrete element method modeling for the dynamic behavior of the polar detector in a crushed ice environment during polar exploration
inferred← citeshttps://doi.org/10.1088/1361-651x/ac6438openalex-snapshot
Discrete element method to simulate interface delamination and fracture of plasma-sprayed thermal barrier coatings
inferred← citeshttps://doi.org/10.1088/2053-1591/ad1a7fopenalex-snapshot
Optimization of parameters for the best shot peening effect based on surface response and neural network model
inferred← citeshttps://doi.org/10.1177/09544070241240009openalex-snapshot
Modeling and analysis of center-steering characteristics of variable-configuration wheel-track unmanned ground vehicle based on dynamic resistance
inferred← citeshttps://doi.org/10.3390/met16030346openalex-snapshot
Fatigue Damage in Shot-Peened Al7075-T6 Alloy: Correlation Between Acoustic Emission Spectra and Fractographic Analysis
Editorial review for independent work. ICSAC — the Institute for Complexity
Science and Advanced Computing — runs a structured editorial panel for researchers
publishing outside journals, and publishes on CiteStamp rails. Submission is free
and goes through ORCID: icsacinstitute.org/submit.