On the public citation graph
Work hardening and texture during compression deformation of the Al–Si–Cu–Mg alloy modified with V, Zr and Ti
0 signed · 98 inferred · view as graph
Inferred edges come from two machine sources: sweeps of open repository metadata (mostly SSRN and Zenodo), and a bulk OpenAlex citation snapshot. Every row below is labelled with the one it came from. Neither is a complete citation index — absence here is not evidence of absence.
Is this your work? Sign in with ORCID and put your name on the
claims that are yours.
Reference health. See whether every reference in this work resolves to a
known work and none has been retracted — and get a dated CiteStamped
badge you can embed.
What this work says
Outgoing claims: the papers this work cites, builds on, or argues with.
inferredcites →https://doi.org/10.1007/s10853-009-3978-6openalex-snapshot
Precipitation-hardening in cast AL–Si–Cu–Mg alloys
inferredcites →https://doi.org/10.1007/s11661-002-0117-2openalex-snapshot
Effect of loading condition and stress state on damage evolution of silicon particles in an Al-Si-Mg-Base cast alloy
inferredcites →https://doi.org/10.1007/s11661-002-0331-yopenalex-snapshot
Anisotropy of intermetallic particle cracking damage evolution in an Al-Mg-Si base wrought aluminum alloy under uniaxial compression
inferredcites →https://doi.org/10.1007/s11661-002-0381-1openalex-snapshot
Quantitative characterization of three-dimensional damage evolution in a wrought Al-alloy under tension and compression
inferredcites →https://doi.org/10.1007/s11661-003-0007-2openalex-snapshot
The influence of precipitation on the work-hardening behavior of the aluminum alloys AA6111 and AA7030
inferredcites →https://doi.org/10.1007/s11661-009-0062-4openalex-snapshot
Studies on the Work-Hardening Behavior of AA2219 under Different Aging Treatments
inferredcites →https://doi.org/10.1007/s11661-010-0258-7openalex-snapshot
A Combined Precipitation, Yield Strength, and Work Hardening Model for Al-Mg-Si Alloys
inferredcites →https://doi.org/10.1007/s11665-013-0578-zopenalex-snapshot
Heat Treatment Development for a Rapidly Solidified Heat Resistant Cast Al-Si Alloy
inferredcites →https://doi.org/10.1016/0001-6160(81)90112-7openalex-snapshot
Kinetics of flow and strain-hardening
inferredcites →https://doi.org/10.1016/b978-0-12-425970-6.x5000-0openalex-snapshot
Unified Constitutive Laws of Plastic Deformation
inferredcites →https://doi.org/10.1016/j.actamat.2005.02.041openalex-snapshot
Interphase and intergranular stress generation in composites exhibiting plasticity in both phases
inferredcites →https://doi.org/10.1016/j.actamat.2009.11.044openalex-snapshot
Influence of high-temperature solution treatments on mechanical properties of an Al–Si–Cu aluminum alloy
inferredcites →https://doi.org/10.1016/j.actamat.2011.10.029openalex-snapshot
Solute nanostructures and their strengthening effects in Al–7Si–0.6Mg alloy F357
inferredcites →https://doi.org/10.1016/j.ijplas.2011.01.004openalex-snapshot
Void growth and coalescence in ductile solids with stage III and stage IV strain hardening
inferredcites →https://doi.org/10.1016/j.jallcom.2010.02.111openalex-snapshot
Microstructure and texture evolution in cryorolled Al 7075 alloy
inferredcites →https://doi.org/10.1016/j.jallcom.2010.03.117openalex-snapshot
Evolution of microstructures and textures of 7050 Al alloy hot-rolled plate during staged solution heat-treatments
inferredcites →https://doi.org/10.1016/j.jallcom.2012.05.030openalex-snapshot
Effect of fine-grained structural Al–12%Si materials on morphologies and crystal defects of eutectic Si in HCC Al–12%Si alloy billets
inferredcites →https://doi.org/10.1016/j.jallcom.2012.06.051openalex-snapshot
Characterization of precipitates in a hot-deformed hypereutectic Al–Si alloy
inferredcites →https://doi.org/10.1016/j.jmatprotec.2007.08.040openalex-snapshot
Influence of texture and grain structure on strain localisation and formability for AlMgSi alloys
inferredcites →https://doi.org/10.1016/j.jmatprotec.2010.03.020openalex-snapshot
The heat treatment of Al–Si–Cu–Mg casting alloys
inferredcites →https://doi.org/10.1016/j.matchar.2010.06.022openalex-snapshot
Effects of Cu content on microstructure and mechanical properties of Al–14.5Si–0.5Mg alloy
inferredcites →https://doi.org/10.1016/j.msea.2006.09.164openalex-snapshot
On the addition of precipitation- and work-hardening in an Al–Sc alloy
inferredcites →https://doi.org/10.1016/j.msea.2010.01.033openalex-snapshot
Flow stress analysis of TWIP steel via the XRD measurement of dislocation density
inferredcites →https://doi.org/10.1016/j.msea.2011.06.036openalex-snapshot
Artificial ageing of Al–Si–Cu–Mg casting alloys
inferredcites →https://doi.org/10.1016/j.msea.2011.07.018openalex-snapshot
Tensile and fatigue properties of a cast aluminum alloy with Ti, Zr and V additions
inferredcites →https://doi.org/10.1016/j.msea.2012.02.032openalex-snapshot
Influence of Mg and solution heat treatment on the occurrence of incipient melting in Al–Si–Cu–Mg cast alloys
inferredcites →https://doi.org/10.1016/j.scriptamat.2012.04.007openalex-snapshot
Detwinning and strain hardening of an extruded magnesium alloy during compression
inferredcites →https://doi.org/10.1016/s0079-6425(02)00003-8openalex-snapshot
Physics and phenomenology of strain hardening: the FCC case
inferredcites →https://doi.org/10.1016/s0921-5093(01)01393-4openalex-snapshot
Texture, microstructure and formability of SC and DC cast Al–Mg alloys
inferredcites →https://doi.org/10.1016/s0921-5093(01)01968-2openalex-snapshot
Texture control by thermomechanical processing of AA6xxx Al–Mg–Si sheet alloys for automotive applications—a review
inferredcites →https://doi.org/10.1016/s0921-5093(99)00549-3openalex-snapshot
Texture and mechanical property anisotropy in an Al–Mg–Si–Cu alloy
inferredcites →https://doi.org/10.1016/s1359-6454(97)00157-2openalex-snapshot
Effect of precipitation on the evolution of cube recrystallisation texture
inferredcites →https://doi.org/10.1016/s1359-6462(98)00326-1openalex-snapshot
Experimental measurements of damage evolution in Al-Si eutectic alloys
inferredcites →https://doi.org/10.1201/9781482287479openalex-snapshot
Introduction to Texture Analysis
inferredcites →https://doi.org/10.2320/matertrans.l-mra2008847openalex-snapshot
Effect of Precipitation on Development of Recrystallization Texture in a 6061 Aluminum Alloy
inferredcites →https://doi.org/10.4028/www.scientific.net/msf.408-412.1525openalex-snapshot
Microstructure and Texture of Eutectic Al-Si Alloy with Multiple Cold Rolling and Heat Treatment
inferredcites →https://doi.org/10.4028/www.scientific.net/msf.495-497.579openalex-snapshot
Texture Formation during High Temperature Deformation of Al-3mass%Mg Solid Solution
inferredcites →https://doi.org/10.4028/www.scientific.net/ssp.35-36.1openalex-snapshot
A Review of the Stages of Work Hardening
What points at this work
Incoming claims: where this work appears in other papers’ reference lists and arguments.
inferred← citeshttps://doi.org/10.2139/ssrn.4458899openalex-extracted
Collaboratively Enhancing the Strength and Ductility of Gh3600 Nickel-Based Ultra-Thin Strips Via Introduction of Pre-Precipitation Process
inferred← citeshttps://doi.org/10.1002/9781119093466.ch121openalex-snapshot
Low Cycle Fatigue of Aluminum‐Silicon Alloys for Power‐Train Applications
inferred← citeshttps://doi.org/10.1007/978-3-319-48127-2_121openalex-snapshot
Low Cycle Fatigue of Aluminum-Silicon Alloys for Power-Train Applications
inferred← citeshttps://doi.org/10.1007/978-3-319-72284-9_50openalex-snapshot
Development of Innovative Al–Si–Mn–Mg Alloys with High Mechanical Properties
inferred← citeshttps://doi.org/10.1007/978-981-10-4819-7_25openalex-snapshot
Effect of Transition Metals on Thermal Stability of Al‒Si Cast Alloys
inferred← citeshttps://doi.org/10.1007/s10853-023-08665-3openalex-snapshot
Thermodynamic description of the Al–Ag–Zr system and discovery of the high-strength ternary phase Al1.84Ag0.16Zr
inferred← citeshttps://doi.org/10.1007/s11661-015-2880-xopenalex-snapshot
Improving High-Temperature Tensile and Low-Cycle Fatigue Behavior of Al-Si-Cu-Mg Alloys Through Micro-additions of Ti, V, and Zr
inferred← citeshttps://doi.org/10.1007/s11661-016-3365-2openalex-snapshot
Effect of Cr, Ti, V, and Zr Micro-additions on Microstructure and Mechanical Properties of the Al-Si-Cu-Mg Cast Alloy
inferred← citeshttps://doi.org/10.1007/s11661-021-06430-2openalex-snapshot
Flow Behavior and Microstructure Characterization of 7085 Aluminum Alloy Under Various Deformation Conditions
inferred← citeshttps://doi.org/10.1007/s11665-023-08201-zopenalex-snapshot
Tension–Compression Flow Asymmetry as a Function of Alloy Composition in the Al-Si System
inferred← citeshttps://doi.org/10.1007/s12540-018-0025-7openalex-snapshot
Effect of Heat Treatments on Microstructures and Tensile Properties of Cu–3 wt%Ag–0.5 wt%Zr Alloy
inferred← citeshttps://doi.org/10.1007/s40962-024-01449-8openalex-snapshot
Effect of the addition of Ni and Cu on solidification microstructure evolution of Al-5Si-0.5Mg alloys
inferred← citeshttps://doi.org/10.1007/s40962-025-01649-wopenalex-snapshot
The Effect of Eu and T6 heat treatment on Microstructure of A390 Alloys
inferred← citeshttps://doi.org/10.1016/j.ijfatigue.2014.08.001openalex-snapshot
Monotonic and cyclic deformation behavior of the Al–Si–Cu–Mg cast alloy with micro-additions of Ti, V and Zr
inferred← citeshttps://doi.org/10.1016/j.ijfatigue.2016.02.008openalex-snapshot
Effect of transition metals on energy absorption during strain-controlled fatigue of an aluminum alloy
inferred← citeshttps://doi.org/10.1016/j.jallcom.2014.06.210openalex-snapshot
Effect of Zr, V and Ti on hot compression behavior of the Al–Si cast alloy for powertrain applications
inferred← citeshttps://doi.org/10.1016/j.jallcom.2014.08.187openalex-snapshot
Work-hardening behaviors of typical solution-treated and aged Ni-based superalloys during hot deformation
inferred← citeshttps://doi.org/10.1016/j.jallcom.2017.01.343openalex-snapshot
Interaction between nano-precipitates and dislocations during high temperature deformation of Al-Si alloys
inferred← citeshttps://doi.org/10.1016/j.jallcom.2018.10.068openalex-snapshot
Influence of precipitation on thermal diffusivity of Al-6Si-0.4Mg-0.9Cu-(Ti) alloys
inferred← citeshttps://doi.org/10.1016/j.jallcom.2023.169937openalex-snapshot
Hot deformation behavior of a novel Ni–W–Co high-density Ni-based alloy with ultra-high W content
inferred← citeshttps://doi.org/10.1016/j.jallcom.2023.171844openalex-snapshot
Strengthening mechanisms and work hardening in a heterostructured cast aluminum alloy under compressive loading: Correlation with nanomechanical properties
inferred← citeshttps://doi.org/10.1016/j.jallcom.2024.176685openalex-snapshot
Flow behavior and microstructural evolution of Al-1.2Mg-2.4Si-1.2Cu-0.6Mn alloy during hot compression
inferred← citeshttps://doi.org/10.1016/j.jallcom.2024.177802openalex-snapshot
The integrated effect of grain configuration and δ phase on micro-scaled mechanical stability of nickel-based superalloy foil
inferred← citeshttps://doi.org/10.1016/j.jmapro.2023.03.039openalex-snapshot
Additively manufactured Ti55511 alloy: Microstructure and residual stress effect on mechanical properties
inferred← citeshttps://doi.org/10.1016/j.jmrt.2023.08.019openalex-snapshot
Coupling effect of feature size and δ phase on compressive deformation of a nickel-based superalloy at the mesoscopic scale
inferred← citeshttps://doi.org/10.1016/j.jmrt.2023.09.222openalex-snapshot
The hot deformation characteristics and the associated microstructural evolution of an Al–Cu–Li–Zn alloy studied by constitutive equations and processing maps
inferred← citeshttps://doi.org/10.1016/j.jmrt.2024.01.157openalex-snapshot
Effect of casting process and Zr, V addition on microstructure and mechanical properties of Al–12Si-4.5Cu–2Ni alloy
inferred← citeshttps://doi.org/10.1016/j.jmst.2020.02.021openalex-snapshot
Microstructure evolution and mechanical property characterization of a nickel-based superalloy at the mesoscopic scale
inferred← citeshttps://doi.org/10.1016/j.jmst.2021.09.036openalex-snapshot
Influence of post-heat treatment on the microstructure and mechanical properties of Al-Cu-Mg-Zr alloy manufactured by selective laser melting
inferred← citeshttps://doi.org/10.1016/j.matchar.2015.04.012openalex-snapshot
Enhanced microstructural homogeneity in metal-matrix composites developed under high-pressure-double-torsion
inferred← citeshttps://doi.org/10.1016/j.matchar.2015.06.013openalex-snapshot
Microstructure and texture characterization of 7075 Al alloy during the SIMA process
inferred← citeshttps://doi.org/10.1016/j.matchar.2019.109875openalex-snapshot
Effect of the grain size on the microtensile deformation and fracture behaviors of a nickel-based superalloy via EBSD and in-situ synchrotron radiation X-ray tomography
inferred← citeshttps://doi.org/10.1016/j.matchar.2024.114285openalex-snapshot
Effect of precipitation phase on the flow behavior of a nickel-based superalloy during compressive deformation
inferred← citeshttps://doi.org/10.1016/j.matdes.2014.02.060openalex-snapshot
Tensile and compressive deformation behavior of the Al–Si–Cu–Mg cast alloy with additions of Zr, V and Ti
inferred← citeshttps://doi.org/10.1016/j.matdes.2015.05.057openalex-snapshot
Microstructure and mechanical properties of Al–Si cast alloy with additions of Zr–V–Ti
inferred← citeshttps://doi.org/10.1016/j.matdes.2023.112322openalex-snapshot
Collaboratively enhancing the strength and ductility of GH3600 Nickel-Based Ultra-Thin strips via the Pre-Precipitation process
inferred← citeshttps://doi.org/10.1016/j.matpr.2017.11.611openalex-snapshot
Effect of heat treatment and uniaxial deformation on thermal stability and wear behavior of AA 2014 alloy
inferred← citeshttps://doi.org/10.1016/j.msea.2015.03.077openalex-snapshot
Effect of solidification rate and loading mode on deformation behavior of cast Al–Si–Cu–Mg alloy with additions of transition metals
inferred← citeshttps://doi.org/10.1016/j.msea.2015.11.049openalex-snapshot
Ageing characteristics and high-temperature tensile properties of Al–Si–Cu–Mg alloys with micro-additions of Cr, Ti, V and Zr
inferred← citeshttps://doi.org/10.1016/j.msea.2016.12.044openalex-snapshot
Ageing characteristics and high-temperature tensile properties of Al–Si–Cu–Mg alloys with micro-additions of Mo and Mn
inferred← citeshttps://doi.org/10.1016/j.msea.2017.02.096openalex-snapshot
The microstructure, texture, and room temperature mechanical properties of friction stir processed Mg-Y-Nd alloy
inferred← citeshttps://doi.org/10.1016/j.msea.2018.05.050openalex-snapshot
A constitutive model considering secondary phase harden and size effect in plastic deformation of Cu-3 wt%Ag-0.5 wt%Zr thin sheet
inferred← citeshttps://doi.org/10.1016/j.msea.2019.138405openalex-snapshot
Effect of δ phase on size effect in microtensile deformation of a nickel-based superalloy
inferred← citeshttps://doi.org/10.1016/j.msea.2025.149010openalex-snapshot
Strain rate-induced crystallographic texture development in tensile deformation of a rapidly solidified thin-strip cast AA5182 Al-Mg alloy
inferred← citeshttps://doi.org/10.1016/j.mtcomm.2020.101808openalex-snapshot
Influence of temperature on microstructure, crystallographic texture and mechanical properties of EN AW 6016 alloy during plane strain compression
inferred← citeshttps://doi.org/10.1016/j.tca.2014.08.037openalex-snapshot
Thermal stability of (AlSi) (ZrVTi) intermetallic phases in the Al–Si–Cu–Mg cast alloy with additions of Ti, V, and Zr
inferred← citeshttps://doi.org/10.1016/j.vacuum.2017.12.037openalex-snapshot
Effect of alloy composition on hot deformation behavior of some Al-Mg-Si alloys
inferred← citeshttps://doi.org/10.1080/02670836.2016.1216026openalex-snapshot
A high-temperature deformation model based on dislocation movement for wrought aluminium alloys
inferred← citeshttps://doi.org/10.1088/1757-899x/117/1/012031openalex-snapshot
Aging characteristics of the Al-Si-Cu-Mg cast alloy modified with transition metals Zr, V and Ti
inferred← citeshttps://doi.org/10.1088/2053-1591/ab0e48openalex-snapshot
The flow behavior of homogenizated Al-Mg-Si-La aluminum alloy during hot deformation
inferred← citeshttps://doi.org/10.1179/1743284714y.0000000606openalex-snapshot
Dislocation slip distance during compression of Al–Si–Cu–Mg alloy with additions of Ti–Zr–V
inferred← citeshttps://doi.org/10.2139/ssrn.4864961openalex-snapshot
Flow Stress and Microstructural Evolution of Al−1.2mg−2.4si−1.2cu-0.6mn Alloy During Hot Compression
inferred← citeshttps://doi.org/10.32920/ryerson.14656953openalex-snapshot
Development and Characterization of Cast Modified SI-CU-MG Alloys for Heat Resistant Power Train Applications
inferred← citeshttps://doi.org/10.32920/ryerson.14656953.v1openalex-snapshot
Development and Characterization of Cast Modified SI-CU-MG Alloys for Heat Resistant Power Train Applications
inferred← citeshttps://doi.org/10.3390/met8060444openalex-snapshot
Tuning Low Cycle Fatigue Properties of Cu-Be-Co-Ni Alloy by Precipitation Design
inferred← citeshttps://doi.org/10.4028/www.scientific.net/msf.828-829.29openalex-snapshot
Thermal Stability of Al-Si-Cu-Mg Cast Alloys Modified with Transition Metals Zr, V and Ti
inferred← citeshttps://doi.org/10.4271/2015-01-0514openalex-snapshot
Effect of Strain Level on the Behavior of Intermetallics and Texture of Al-Si-Cu-Mg Alloy Modified with Transition Metals
inferred← citeshttps://doi.org/10.5505/pajes.2018.46343openalex-snapshot
Effect of Strontium and Strontium-Magnesium Additions on the Microstructure and Mechanical Properties of Hypereutectic Al-17Si Alloy
inferred← citeshttps://doi.org/10.5755/j02.ms.36394openalex-snapshot
Effect of Cold Compression and Heat Treatment on Microstructure and Mechanical Properties of Al-Zn-Mg-Cu Alloyure and mechanical properties of Al-Zn-Mg-Cu alloy
Editorial review for independent work. ICSAC — the Institute for Complexity
Science and Advanced Computing — runs a structured editorial panel for researchers
publishing outside journals, and publishes on CiteStamp rails. Submission is free
and goes through ORCID: icsacinstitute.org/submit.