On the public citation graph

Effect of rare earth element Er on the microstructure and properties of highly alloyed Al-Zn-Mg-Cu-Zr-Ti alloy

https://doi.org/10.1016/j.jallcom.2023.170248

0 signed · 108 inferred · view as graph

Inferred edges come from two machine sources: sweeps of open repository metadata (mostly SSRN and Zenodo), and a bulk OpenAlex citation snapshot. Every row below is labelled with the one it came from. Neither is a complete citation index — absence here is not evidence of absence.

Is this your work? Sign in with ORCID and put your name on the claims that are yours.

Claim with ORCID

Reference health. See whether every reference in this work resolves to a known work and none has been retracted — and get a dated CiteStamped badge you can embed.

See reference health

What this work says

Outgoing claims: the papers this work cites, builds on, or argues with.

inferredcites →https://doi.org/10.1007/s11661-008-9620-4openalex-snapshot

Patterns of Recrystallization in Warm- and Hot-Deformed AA6022

inferredcites →https://doi.org/10.1007/s11661-013-1731-xopenalex-snapshot

Effect of Zn Content on the Microstructure and Properties of Super-High Strength Al-Zn-Mg-Cu Alloys

inferredcites →https://doi.org/10.1007/s11665-020-05096-yopenalex-snapshot

Effect of Zn/Mg Ratio on Microstructure and Properties of Cold Extruded Al-xZn-2.4Mg-0.84Cu-0.2Zr-0.25Ti Aluminum Alloy

inferredcites →https://doi.org/10.1007/s11771-012-1085-3openalex-snapshot

Influence of cerium on microstructures and mechanical properties of Al-Zn-Mg-Cu alloys

inferredcites →https://doi.org/10.1016/j.actamat.2004.06.025openalex-snapshot

Early-stage precipitation in Al–Zn–Mg–Cu alloy (7050)

inferredcites →https://doi.org/10.1016/j.actamat.2008.02.037openalex-snapshot

Cube texture in hot-rolled aluminum alloy 1050 (AA1050)—nucleation and growth behavior

inferredcites →https://doi.org/10.1016/j.actamat.2008.04.022openalex-snapshot

Texture evolution by shear on two planes during ECAP of a high-strength aluminum alloy

inferredcites →https://doi.org/10.1016/j.actamat.2013.09.042openalex-snapshot

Mechanical behavior and strengthening mechanisms in ultrafine grain precipitation-strengthened aluminum alloy

inferredcites →https://doi.org/10.1016/j.commatsci.2019.03.001openalex-snapshot

Precipitation of L12-phase nano-particles in dilute Al-Er-Zr alloys from the first-principles

inferredcites →https://doi.org/10.1016/j.jallcom.2013.05.182openalex-snapshot

Characterization of microstructure and deformation texture during equal channel Angular pressing of Al–Zn–Mg–Cu alloy

inferredcites →https://doi.org/10.1016/j.jallcom.2018.05.063openalex-snapshot

Effect of Zn/Mg ratios on SCC, electrochemical corrosion properties and microstructure of Al-Zn-Mg alloy

inferredcites →https://doi.org/10.1016/j.jallcom.2018.12.151openalex-snapshot

Localized corrosion behavior associated with Al7Cu2Fe intermetallic in Al-Zn-Mg-Cu-Zr alloy

inferredcites →https://doi.org/10.1016/j.jallcom.2020.153949openalex-snapshot

Microstructure and property evolution of Al-0.4Fe-0.15Zr-0.25Er alloy processed by high pressure torsion

inferredcites →https://doi.org/10.1016/j.jallcom.2021.160789openalex-snapshot

Two-stage homogenization of Al-Zn-Mg-Cu-Zr alloy processed by twin-roll casting to improve L12 Al3Zr precipitation, recrystallization resistance, and performance

inferredcites →https://doi.org/10.1016/j.jmrt.2022.04.153openalex-snapshot

Quantitative relationship between microstructure and tensile properties of Al–Zn–Mg–Cu alloys with various alloying degrees

inferredcites →https://doi.org/10.1016/j.jmrt.2022.06.059openalex-snapshot

Effect of Cu content and Zn/Mg ratio on microstructure and mechanical properties of Al–Zn–Mg–Cu alloys

inferredcites →https://doi.org/10.1016/j.matchar.2015.02.016openalex-snapshot

Effects of two-step homogenization on precipitation behavior of Al3Zr dispersoids and recrystallization resistance in 7150 aluminum alloy

inferredcites →https://doi.org/10.1016/j.matchar.2016.02.008openalex-snapshot

Effects of homogenization treatment on recrystallization behavior of 7150 aluminum sheet during post-rolling annealing

inferredcites →https://doi.org/10.1016/j.matchar.2016.06.007openalex-snapshot

Quantitative measurement for the microstructural parameters of nano-precipitates in Al-Mg-Si-Cu alloys

inferredcites →https://doi.org/10.1016/j.matchar.2021.111617openalex-snapshot

Effects of retrogression and re-aging treatment on precipitation behavior, mechanical and corrosion properties of a Zr+Er modified Al-Zn-Mg-Cu alloy

inferredcites →https://doi.org/10.1016/j.matchar.2022.112142openalex-snapshot

New insight into precipitation of Al3Zr and correlative effect on recrystallization behavior in a rapidly-solidified Al-Zn-Mg-Cu-Zr alloy

inferredcites →https://doi.org/10.1016/j.matdes.2013.12.002openalex-snapshot

Recent developments in advanced aircraft aluminium alloys

inferredcites →https://doi.org/10.1016/j.matdes.2015.06.183openalex-snapshot

Investigation of mechanical and corrosion properties of an Al–Zn–Mg–Cu alloy under various ageing conditions and interface analysis of η′ precipitate

inferredcites →https://doi.org/10.1016/j.matdes.2017.06.054openalex-snapshot

Effect of quench-induced precipitation on microstructure and mechanical properties of 7085 aluminum alloy

inferredcites →https://doi.org/10.1016/j.matdes.2022.111129openalex-snapshot

Effect of combined addition of Zr, Ti and Y on microstructure and tensile properties of an Al-Zn-Mg-Cu alloy

inferredcites →https://doi.org/10.1016/j.msea.2013.06.028openalex-snapshot

Influence of Ce addition on impact properties and microstructures of 2519A aluminum alloy

inferredcites →https://doi.org/10.1016/j.msea.2014.01.062openalex-snapshot

Influence of trace Ti on the microstructure, age hardening behavior and mechanical properties of an Al–Zn–Mg–Cu–Zr alloy

inferredcites →https://doi.org/10.1016/j.msea.2014.05.021openalex-snapshot

Effect of Zr, Er and Cr additions on microstructures and properties of Al–Zn–Mg–Cu alloys

inferredcites →https://doi.org/10.1016/j.msea.2015.05.027openalex-snapshot

A study of precipitation strengthening and recrystallization behavior in dilute Al–Er–Hf–Zr alloys

inferredcites →https://doi.org/10.1016/j.msea.2017.02.071openalex-snapshot

Effects of homogenization on precipitation of Al 3 (Er,Zr) particles and recrystallization behavior in a new type Al-Zn-Mg-Er-Zr alloy

inferredcites →https://doi.org/10.1016/j.msea.2017.05.047openalex-snapshot

Quantitative metallography of precipitating and secondary phases after strengthening treatment of net shaped casting of Al-Zn-Mg-Cu (7000) alloys

inferredcites →https://doi.org/10.1016/j.msea.2017.09.032openalex-snapshot

Effect of Sc and Zr additions on the microstructure/strength of Al-Cu binary alloys

inferredcites →https://doi.org/10.1016/j.msea.2018.05.092openalex-snapshot

Nano-scale precipitate evolution and mechanical properties of 7085 aluminum alloy during thermal exposure

inferredcites →https://doi.org/10.1016/j.msea.2020.139217openalex-snapshot

Effects of artificial aging on microstructure, mechanical properties and stress corrosion cracking of a novel high strength 7A99 Al alloy

inferredcites →https://doi.org/10.1016/j.msea.2020.139391openalex-snapshot

Micro-alloying effect of Er and Zr on microstructural evolution and yield strength of Al-3Cu (wt.%) binary alloys

inferredcites →https://doi.org/10.1016/j.msea.2020.139807openalex-snapshot

Effect of trace Er on the microstructure and properties of Al–Zn–Mg–Cu–Zr alloys during heat treatments

inferredcites →https://doi.org/10.1016/j.msea.2020.140437openalex-snapshot

Effects of Ti addition on the microstructure and mechanical properties of Al–Zn–Mg–Cu–Zr alloy

inferredcites →https://doi.org/10.1016/j.msea.2020.140490openalex-snapshot

Effect of various aging treatment on thermal stability of a novel Al-Zn-Mg-Cu alloy for oil drilling

inferredcites →https://doi.org/10.1016/j.msea.2020.140719openalex-snapshot

Precipitation strengthening in naturally aged Al–Zn–Mg–Cu alloy

inferredcites →https://doi.org/10.1016/j.pnsc.2019.12.002openalex-snapshot

Effects of homogenization on the dissolution and precipitation behaviors of intermetallic phase for a Zr and Er containing Al–Zn–Mg–Cu alloy

inferredcites →https://doi.org/10.1016/j.scriptamat.2011.06.033openalex-snapshot

Synergetic effect of Er and Zr on the precipitation hardening of Al–Er–Zr alloy

inferredcites →https://doi.org/10.1016/s0921-5093(99)00674-7openalex-snapshot

Recent development in aluminium alloys for aerospace applications

inferredcites →https://doi.org/10.1016/s1003-6326(11)60880-7openalex-snapshot

Microstructure of Al-Zn-Mg-Cu-Zr-0.5Er alloy under as-cast and homogenization conditions

inferredcites →https://doi.org/10.1016/s1003-6326(17)60168-7openalex-snapshot

Microstructural evolution of new type Al–Zn–Mg–Cu alloy with Er and Zr additions during homogenization

inferredcites →https://doi.org/10.1023/a:1017973432592openalex-snapshot

Review Grain and subgrain characterisation by electron backscatter diffraction

inferredcites →https://doi.org/10.1557/s43578-022-00747-3openalex-snapshot

Effect of various multi-stage solution treatments on the microstructure and properties of cold-extruded Al–9.74Zn–2.59 Mg–0.94Cu–0.2Zr–0.83Ti alloy

What points at this work

Incoming claims: where this work appears in other papers’ reference lists and arguments.

inferred← citeshttps://doi.org/10.2139/ssrn.4571247openalex-extracted

inferred← citeshttps://doi.org/10.1007/s10853-026-13338-yopenalex-snapshot

Influence of minor La additions and melt purification on the corrosion behavior and mechanical properties of Zn–7Al–3 Mg alloy

inferred← citeshttps://doi.org/10.1007/s11663-024-03302-zopenalex-snapshot

Synergetic Effect of La and Sb on the Eutectic Silicon and Mechanical Properties in Multi-elements Hypoeutectic Al–Si Alloy

inferred← citeshttps://doi.org/10.1007/s11663-026-04236-4openalex-snapshot

Influence of La–Ce and Y–Sc Additions on Solidification Microstructure and Mechanical Properties of Al–Zn–Mg–Cu Alloys

inferred← citeshttps://doi.org/10.1007/s11665-025-11617-4openalex-snapshot

Effect of Ce on Microstructure and Mechanical Properties of Al-Cu-Mn Alloys

inferred← citeshttps://doi.org/10.1007/s11669-025-01207-1openalex-snapshot

Atomic Kinetic Monte Carlo Simulations Reveal Solute-Vacancy Dynamics in Aluminum and Their Governing Role in Precipitation Aging

inferred← citeshttps://doi.org/10.1007/s12540-023-01556-xopenalex-snapshot

Microstructure and Mechanical Properties of a Highly Alloyed Al–Zn–Mg–Cu–Zr Alloy Under T6I4 and T6R6I4 Agings

inferred← citeshttps://doi.org/10.1007/s12540-024-01654-4openalex-snapshot

Effect of Rare Earth La on Microstructure, Hardness and Corrosion Resistance of A356 Aluminum Alloy

inferred← citeshttps://doi.org/10.1007/s40195-024-01671-7openalex-snapshot

Effect of Y and Ce Micro-alloying on Microstructure and Hot Tearing of As-Cast Al–Cu–Mg Alloy

inferred← citeshttps://doi.org/10.1007/s40962-025-01619-2openalex-snapshot

Er and Zr Microalloying and Hot Tearing Susceptibility of Al-30Zn-2Cu High-Zinc Aluminum Alloys

inferred← citeshttps://doi.org/10.1016/j.cocom.2026.e01432openalex-snapshot

First-principles investigation of the effects of yttrium (Y) doping on the structural stability, electronic properties, and mechanical properties of the Al2Cu phase

inferred← citeshttps://doi.org/10.1016/j.jallcom.2024.175290openalex-snapshot

Insights into the effects of La on the grain refinement and mechanical properties of Al-Ti-C intermediate alloy and pure Al: A first-principle study and experimental investigation

inferred← citeshttps://doi.org/10.1016/j.jallcom.2025.179747openalex-snapshot

Effect of minor La addition on the microstructure and mechanical properties of cast Al-Cu-Mn alloys

inferred← citeshttps://doi.org/10.1016/j.jallcom.2025.180057openalex-snapshot

Heat treatment regulates microstructure and properties of laser in-situ alloyed zinc-lanthanum biodegradable alloy

inferred← citeshttps://doi.org/10.1016/j.jallcom.2026.186236openalex-snapshot

Effect of Er and Sc additions on microstructure, mechanical properties and corrosion behaviors of hot rolled Al-Zn-Mg alloy

inferred← citeshttps://doi.org/10.1016/j.jallcom.2026.188066openalex-snapshot

Effect of TiB2 content on microstructure and mechanical properties of TiB2/6082 composites fabricated by continuous squeeze casting-extrusion process

inferred← citeshttps://doi.org/10.1016/j.jallcom.2026.188249openalex-snapshot

Synergistic effects of Sc and Er co‑addition on microstructure evolution and mechanical properties of a high-alloyed Al–Zn–Mg–Cu-Zr-Ti alloy

inferred← citeshttps://doi.org/10.1016/j.jallcom.2026.191355openalex-snapshot

Achieving a superior strength-ductility synergy in an Al-Zn-Mg-Cu-Y-Sc-Zr alloy

inferred← citeshttps://doi.org/10.1016/j.jmrt.2024.07.051openalex-snapshot

Recent progress of Al–Mg alloys: Forming and preparation process, microstructure manipulation and application

inferred← citeshttps://doi.org/10.1016/j.jmrt.2024.08.125openalex-snapshot

Enhancing strength and ductility of Al–Cu–Li alloys by microalloying both Er and Zr to promote complete transformation from δ′ (Al3Li) to T1 (Al2CuLi) precipitates

inferred← citeshttps://doi.org/10.1016/j.jmrt.2024.09.009openalex-snapshot

Effect of in-situ forging assisted squeeze casting on the forming quality and mechanical properties of automobile control arm

inferred← citeshttps://doi.org/10.1016/j.jmrt.2024.11.007openalex-snapshot

The microstructure and corrosion characteristic of Al-10 wt%RE (Re= Ce, Nd, La, Y) binary aluminum alloys in natural seawater

inferred← citeshttps://doi.org/10.1016/j.jmrt.2024.11.201openalex-snapshot

Improving the mechanical properties and corrosion resistance of a highly alloyed Al–Zn–Mg–Cu alloy through pre-treatment at 350°C prior to multi-stage solution treatment

inferred← citeshttps://doi.org/10.1016/j.jmrt.2024.12.205openalex-snapshot

Research status and prospect of grain refinement in aluminum alloy

inferred← citeshttps://doi.org/10.1016/j.jmrt.2025.06.223openalex-snapshot

Stir-casting manufactured SiCp reinforced aluminum matrix composite with ultrahigh strength and excellent corrosion resistance: Matrix, microstructure and properties

inferred← citeshttps://doi.org/10.1016/j.jmrt.2025.09.113openalex-snapshot

Effect of Cr content on microstructure, mechanical properties and corrosion properties of Al–Zn–Mg–Cu alloys

inferred← citeshttps://doi.org/10.1016/j.jmrt.2025.10.198openalex-snapshot

Recent advances in grain refinement of aluminum alloys: Nucleant particles and solute effects

inferred← citeshttps://doi.org/10.1016/j.jmrt.2026.01.162openalex-snapshot

A review of rare earth elements microalloying in aluminum alloys: Mechanisms of microstructure evolution and Performance Enhancement

inferred← citeshttps://doi.org/10.1016/j.matchar.2023.113474openalex-snapshot

Nano-Y2O3 effects on the electrical contact properties of Al2O3-Cu/35Cr3TiB2 composites

inferred← citeshttps://doi.org/10.1016/j.matchar.2023.113533openalex-snapshot

Trace cerium/ yttrium addition for inhibiting sulfur-induced intermediate temperature embrittlement in ultrahigh-purity copper

inferred← citeshttps://doi.org/10.1016/j.matchar.2025.115200openalex-snapshot

Effect of Sc and Zr co-microalloying on microstructure evolution and mechanical properties of 7085Al alloy

inferred← citeshttps://doi.org/10.1016/j.matchar.2025.115388openalex-snapshot

Sc induced modification enhances strength and ductility of in-situ ZrB2/7085Al nanocomposites

inferred← citeshttps://doi.org/10.1016/j.matchar.2025.115419openalex-snapshot

Effects of Er on η' and T' precipitation strengthening and corrosion resistance in Al-3.7Zn-2.3 Mg-0.1Zr alloy studied by atom probe tomography

inferred← citeshttps://doi.org/10.1016/j.matchar.2026.116004openalex-snapshot

Fracture behavior and strengthening mechanisms of grain boundaries in Al Mg alloys

inferred← citeshttps://doi.org/10.1016/j.matchar.2026.116069openalex-snapshot

Synergistic enhancement of strength and corrosion resistance in a high-strength 7xxx Al alloy via pre-strain-mediated precipitation control

inferred← citeshttps://doi.org/10.1016/j.matchar.2026.116511openalex-snapshot

Effects of thermo-mechanical procedures on microstructure, mechanical properties, and corrosion behavior of highly-alloyed AlZn alloys

inferred← citeshttps://doi.org/10.1016/j.matchar.2026.116566openalex-snapshot

Effect of trace Ce on mechanical properties and corrosion behavior of Al-7.5Zn-2.4 Mg-0.7Cu alloy

inferred← citeshttps://doi.org/10.1016/j.matchar.2026.116682openalex-snapshot

Competitive roles of Al3X precipitates and coarse second phase particles in the recrystallization of Al-Zn-Mg-Cu-Zr alloys

inferred← citeshttps://doi.org/10.1016/j.matdes.2025.114094openalex-snapshot

Microstructural Evolution and Enhanced Thermal Stability of Al–Sc–Zr Alloys Modified with Sm and Si: A Multiscale Analysis

inferred← citeshttps://doi.org/10.1016/j.matdes.2025.114221openalex-snapshot

Strength-thermal conductivity synergy of aluminum alloys revealed by Al–RE (RE = Ce, La, Gd, Y, Sm, Yb, Er) intermetallic compounds

inferred← citeshttps://doi.org/10.1016/j.msea.2023.145725openalex-snapshot

Microstructure, texture and mechanical properties of Al–Zn–Mg–Zr cylindrical part with thin-wall and high-rib formed by integral-accuracy-extrusion

inferred← citeshttps://doi.org/10.1016/j.msea.2023.145788openalex-snapshot

Microstructure evolution and high-temperature performances of AA6111 alloy strengthened by Sc, Zr co-microalloying

inferred← citeshttps://doi.org/10.1016/j.msea.2024.146562openalex-snapshot

Optimized combination of room-temperature formability and high-temperature creep property in a dilute-alloyed Mg sheet via tailoring Nd solute segregation

inferred← citeshttps://doi.org/10.1016/j.msea.2024.146964openalex-snapshot

A novel strategy to enhance the mechanical properties and corrosion resistance of ultra-high strength Al-Zn-Mg-Cu alloy: Pre-recovery Multi-Stage Solution Treatment (P-MST)

inferred← citeshttps://doi.org/10.1016/j.msea.2024.147161openalex-snapshot

Insight into microstructure evolution of in-situ ZrB2np/AA6111 composites with both excellent room and high temperature properties

inferred← citeshttps://doi.org/10.1016/j.msea.2025.147903openalex-snapshot

Effect of extrusion ratio on microstructure evolution and mechanical properties of ultra-high strength Al-Zn-Mg-Cu-Zr-Sc alloy

inferred← citeshttps://doi.org/10.1016/j.msea.2025.148357openalex-snapshot

Improving the microstructure and properties of a high-alloyed Al-Zn-Mg-Cu alloy by optimizing the initial temperature of Pre-recovery multi-stage solution treatment (P-MST)

inferred← citeshttps://doi.org/10.1016/j.msea.2025.148623openalex-snapshot

Achieving high strength and plasticity in a novel Al-Zn-Mg-Cu-Y-Cr alloy via thermomechanical treatment

inferred← citeshttps://doi.org/10.1016/j.msea.2025.149443openalex-snapshot

In-situ tensile deformation of high sulfur gadolinium-bearing steels

inferred← citeshttps://doi.org/10.1016/j.msea.2026.149762openalex-snapshot

Effects of Sc and Zr microalloying on the microstructure and mechanical properties of a squeeze-cast Al-Zn-Mg-Cu alloy

inferred← citeshttps://doi.org/10.1016/j.mtcomm.2026.115684openalex-snapshot

Effective improvement of Er2O3 on the damping properties of TC4: Grain refining and interface bonding

inferred← citeshttps://doi.org/10.1016/j.scriptamat.2023.115772openalex-snapshot

Evolution of strength with rare-earth content in highly-alloyed Mg-Gd-Y alloys

inferred← citeshttps://doi.org/10.1016/j.vacuum.2024.113771openalex-snapshot

Microstructure and properties of a HIP manufactured B4Cp reinforced highly alloyed Al-Zn-Mg-Cu-Zr aluminum matrix composite

inferred← citeshttps://doi.org/10.1016/j.vacuum.2025.115042openalex-snapshot

Effect of rare-earth (Er-La) composite addition on the microstructure and properties of a highly alloyed Al-Zn-Mg-Cu-Zr-Ti aluminum alloy

inferred← citeshttps://doi.org/10.1016/s1003-6326(25)66806-3openalex-snapshot

Effect of Ce element content on microstructure and corrosion resistance of highly-alloyed Al−Zn−Mg−Cu−Zr−Ti alloy

inferred← citeshttps://doi.org/10.1080/00084433.2024.2366687openalex-snapshot

Effect of pre-recovery solid solution treatment on microstructure and comprehensive properties of Al-11.0Zn-3.0Mg-1.0Cu-0.2Zr-0.16Ti-0.15Er-0.15La alloy

inferred← citeshttps://doi.org/10.1080/00084433.2025.2468069openalex-snapshot

Effects of solid solution and aging heat treatment on the microstructure and mechanical properties of Al-Zn-Mg-Cu alloy welds

inferred← citeshttps://doi.org/10.1080/00084433.2025.2601380openalex-snapshot

Effect of 0.15 wt.% La addition on the microstructure and properties of high alloyed Al–Zn–Mg–Cu–Zr alloys

inferred← citeshttps://doi.org/10.20517/jmi.2024.34openalex-snapshot

Multi-model integration accelerates Al-Zn-Mg-Cu alloy screening

inferred← citeshttps://doi.org/10.3390/coatings15040368openalex-snapshot

Effect of Trace Er Addition on the Microstructural Evolution and Heat Resistance Properties of an Al-Zn-Mg-Cu Alloy During High Temperature Tensile and Thermal Exposure

inferred← citeshttps://doi.org/10.3390/ma18153541openalex-snapshot

Effect of Er Microalloying and Zn/Mg Ratio on Dry Sliding Wear Properties of Al-Zn-Mg Alloy

inferred← citeshttps://doi.org/10.3390/met14101114openalex-snapshot

Effect of Er on the Hot Deformation Behavior of the Crossover Al3Zn3Mg3Cu0.2Zr Alloy

Editorial review for independent work. ICSAC — the Institute for Complexity Science and Advanced Computing — runs a structured editorial panel for researchers publishing outside journals, and publishes on CiteStamp rails. Submission is free and goes through ORCID: icsacinstitute.org/submit.