On the public citation graph

Achieving high strength and high electrical conductivity in Cu-Cr-Zr alloy by modifying shear banding during rolling

https://doi.org/10.1016/j.jallcom.2023.170402

0 signed · 69 inferred · view as graph

Inferred edges come from two machine sources: sweeps of open repository metadata (mostly SSRN and Zenodo), and a bulk OpenAlex citation snapshot. Every row below is labelled with the one it came from. Neither is a complete citation index — absence here is not evidence of absence.

Is this your work? Sign in with ORCID and put your name on the claims that are yours.

Claim with ORCID

Reference health. See whether every reference in this work resolves to a known work and none has been retracted — and get a dated CiteStamped badge you can embed.

See reference health

What this work says

Outgoing claims: the papers this work cites, builds on, or argues with.

inferredcites →https://doi.org/10.1016/j.ijplas.2021.103159openalex-snapshot

Activating dispersed strain bands in tensioned nanostructure layer for high ductility: The effects of microstructure inhomogeneity

inferredcites →https://doi.org/10.1016/j.jallcom.2013.08.146openalex-snapshot

Effects of Zr and (Ni, Si) additions on properties and microstructure of Cu–Cr alloy

inferredcites →https://doi.org/10.1016/j.jallcom.2018.03.238openalex-snapshot

Retaining meta-stable fcc-Cr phase by restraining nucleation of equilibrium bcc-Cr phase in CuCrZrTi alloys during ageing

inferredcites →https://doi.org/10.1016/j.jallcom.2020.156893openalex-snapshot

Microstructural evolution and strengthening mechanisms in cold-rolled Cu–Ag alloys

inferredcites →https://doi.org/10.1016/j.jallcom.2022.163646openalex-snapshot

Heterogeneous microstructure enables a synergy of strength, ductility and electrical conductivity in copper alloys

inferredcites →https://doi.org/10.1016/j.matlet.2013.10.055openalex-snapshot

Solute clusters and chemistry in a Cu–Cr–Zr–Mg alloy during the early stage of aging

inferredcites →https://doi.org/10.1016/j.matlet.2017.04.039openalex-snapshot

Effect of chromium and zirconium content on structure, strength and electrical conductivity of Cu-Cr-Zr alloys after high pressure torsion

inferredcites →https://doi.org/10.1016/j.msea.2014.07.095openalex-snapshot

Effect of microstructure on the nucleation and initiation of adiabatic shear bands (ASBs) during impact

inferredcites →https://doi.org/10.1016/j.msea.2015.09.111openalex-snapshot

Optimization of strength, ductility and electrical conductivity of Cu–Cr–Zr alloy by combining multi-route ECAP and aging

inferredcites →https://doi.org/10.1016/j.msea.2016.10.087openalex-snapshot

A high strength and high electrical conductivity Cu-Cr-Zr alloy fabricated by cryorolling and intermediate aging treatment

inferredcites →https://doi.org/10.1016/j.msea.2019.01.002openalex-snapshot

Optimizing the strength, ductility and electrical conductivity of a Cu-Cr-Zr alloy by rotary swaging and aging treatment

inferredcites →https://doi.org/10.1016/j.msea.2019.04.053openalex-snapshot

Contribution of Zr to strength and grain refinement in Cu Cr Zr alloy

inferredcites →https://doi.org/10.1016/j.msea.2019.04.110openalex-snapshot

The roles of Hf element in optimizing strength, ductility and electrical conductivity of copper alloys

inferredcites →https://doi.org/10.1016/j.msea.2020.140413openalex-snapshot

Study on the variation of properties of Cu–Cr–Zr alloy by different rolling and aging sequence

inferredcites →https://doi.org/10.1016/j.msea.2021.141464openalex-snapshot

Microstructure evolution and properties of a Cu–Cr–Zr alloy with high strength and high conductivity

inferredcites →https://doi.org/10.1016/j.msea.2022.143395openalex-snapshot

Improved strength with good conductivity in Cu–Cr–Zr alloys: Determinant effect of under-aging treatment before rolling and aging

inferredcites →https://doi.org/10.1016/j.mtla.2022.101452openalex-snapshot

Nucleation and growth of nanoscale precipitates and the effect on properties during secondary isothermal aging in thin-band of Cu–0.8Cr–0.1Zr alloy

inferredcites →https://doi.org/10.1016/j.pmatsci.2020.100720openalex-snapshot

Alloy design strategies to increase strength and its trade-offs together

inferredcites →https://doi.org/10.1016/j.pmatsci.2020.100755openalex-snapshot

Shear localization in metallic materials at high strain rates

inferredcites →https://doi.org/10.1016/j.pmatsci.2022.101019openalex-snapshot

Heterostructured materials

inferredcites →https://doi.org/10.1016/j.scriptamat.2019.05.036openalex-snapshot

Heterostructure induced dispersive shear bands in heterostructured Cu

inferredcites →https://doi.org/10.1080/14786435608238074openalex-snapshot

III. Dislocation densities in some annealed and cold-worked metals from measurements on the X-ray debye-scherrer spectrum

inferredcites →https://doi.org/10.1126/science.1092905openalex-snapshot

Ultrahigh Strength and High Electrical Conductivity in Copper

inferredcites →https://doi.org/10.2320/matertrans.mbw200736openalex-snapshot

Nanostructural Evolution of Cr-rich Precipitates in a Cu-Cr-Zr Alloy During Heat Treatment Studied by 3 Dimensional Atom Probe

What points at this work

Incoming claims: where this work appears in other papers’ reference lists and arguments.

inferred← citeshttps://doi.org/10.2139/ssrn.4608376openalex-extracted

Deformation and Heat Treatment Effects on High-Strength Cu-Ti-Fe Alloys Microstructure and Properties

inferred← citeshttps://doi.org/10.2139/ssrn.4797828openalex-extracted

Achieving High-Strength Cu-3ti Alloys Through Precipitation Strengthening Facilitated by Secondary Aging

inferred← citeshttps://doi.org/10.1002/adem.202501334openalex-snapshot

Effect of Electromagnetic Stirring on Microstructure Evolution and Mechanical/Electrical Properties of Cu‐25%Ag Alloy Wires

inferred← citeshttps://doi.org/10.1007/s11665-025-11884-1openalex-snapshot

Effect of Annealing and Aging Treatment on Microstructure and Properties of High Deformation Hot-Rolled Cu-Cr-Zr Alloy

inferred← citeshttps://doi.org/10.1007/s11665-026-13472-3openalex-snapshot

The Influence of Rolling and Aging Treatment on the Precipitation Behavior and Properties of Cu–3Ti Alloy

inferred← citeshttps://doi.org/10.1007/s11771-026-6157-xopenalex-snapshot

Microstructural insights into the mechanical and electrical behavior of CuCrZr alloy subjected to sequential cryogenic deformation and aging treatments

inferred← citeshttps://doi.org/10.1007/s43452-024-00890-0openalex-snapshot

Tailoring the microstructure, mechanical properties, and electrical conductivity of Cu–0.7Mg alloy via Ca addition, heat treatment, and severe plastic deformation

inferred← citeshttps://doi.org/10.1016/j.compositesb.2025.112311openalex-snapshot

A novel hierarchical structure of in-situ copper matrix composites reinforced with micro-clusters of TiB2 particles and nano-precipitates of B24Cu particles

inferred← citeshttps://doi.org/10.1016/j.jallcom.2023.172816openalex-snapshot

Enhanced tribological performance of nanotwinned copper enabled by sliding-induced heterostructure

inferred← citeshttps://doi.org/10.1016/j.jallcom.2025.179845openalex-snapshot

Improvement of the semietching behavior of Cu–Cr–Zr–Zn–Sn–Mg alloys via the coupling control of grains, precipitates, dislocations, residual stress, and texture distribution

inferred← citeshttps://doi.org/10.1016/j.jallcom.2025.182369openalex-snapshot

Ultrafast healing of micro-pores in cold-sprayed CuCrZr-W composite coatings via high-frequency induction heating

inferred← citeshttps://doi.org/10.1016/j.jallcom.2025.182615openalex-snapshot

Effect of Mg/Fe microalloying on precipitation behavior and properties of Cu-Ni-Co-P alloys

inferred← citeshttps://doi.org/10.1016/j.jallcom.2026.189296openalex-snapshot

Tailoring heterogeneous lamellar structure in a Cu-Cr-Zr alloy for enhanced strength and ductility: The coupling effect of short-time annealing and aging

inferred← citeshttps://doi.org/10.1016/j.jmrt.2023.10.255openalex-snapshot

Effect of Ti on the microstructure and properties of Cu–Cr alloy

inferred← citeshttps://doi.org/10.1016/j.jmrt.2024.03.098openalex-snapshot

Optimizing mechanical and electrical properties of Cu–3Zr alloy by thermomechanical processing

inferred← citeshttps://doi.org/10.1016/j.jmrt.2024.10.160openalex-snapshot

Effect of trace silver addition on microstructure and properties of Cu-0.45Cr-0.1Zr alloy

inferred← citeshttps://doi.org/10.1016/j.jmrt.2024.11.207openalex-snapshot

Enhancing tribological performance of Cu-1Cr-0.15Zr alloy through optimized processing routes

inferred← citeshttps://doi.org/10.1016/j.jmrt.2025.02.092openalex-snapshot

Texture evolution and shear bands formation induced by Sc doping in Cu–Cr–Zr alloys

inferred← citeshttps://doi.org/10.1016/j.jmrt.2025.09.254openalex-snapshot

Balancing the mechanical properties and electrical conductivity of Cu–3Zr alloy by in-situ synthesized ZrC and thermomechanical processing

inferred← citeshttps://doi.org/10.1016/j.jmrt.2026.01.087openalex-snapshot

Effects of different Cr contents on the microstructure, mechanical and electrical properties of Cu-Mg-Cr alloy

inferred← citeshttps://doi.org/10.1016/j.jmst.2025.12.040openalex-snapshot

A machine learning strategy to achieve strength-conductivity-ductility synergy of high‐performance Cu-Ni-Co-Si alloys via rolling and aging process

inferred← citeshttps://doi.org/10.1016/j.matchar.2024.113670openalex-snapshot

Excellent combination of strength and elongation of TZM alloys achieved by c-ZrO2 and single cross rolling

inferred← citeshttps://doi.org/10.1016/j.matchar.2024.114488openalex-snapshot

La drives the remarkable strength enhancement of the Cu-Cr-Zr alloy through traditional thermo-mechanical treatment

inferred← citeshttps://doi.org/10.1016/j.matdes.2025.113686openalex-snapshot

Dual phase reinforced CuCrZr alloy: Synergistic improvement of mechanical properties and corrosion resistance via metallic glass and rare earth oxides

inferred← citeshttps://doi.org/10.1016/j.matdes.2025.113948openalex-snapshot

Accelerated development of high-strength and high-conductivity Cu-Cr-Ti alloys based on data-driven design and experimental validation

inferred← citeshttps://doi.org/10.1016/j.matdes.2025.114365openalex-snapshot

Pre-aging combined with multi-stage rolling processing: Enhancing precipitate-dislocation interaction for strengthening of Cu-Cr-Zr-Ni-Si alloy

inferred← citeshttps://doi.org/10.1016/j.matlet.2026.141472openalex-snapshot

Machine learning prediction of hardness and electrical conductivity in Cu–Cr-based alloys

inferred← citeshttps://doi.org/10.1016/j.msea.2023.146068openalex-snapshot

Heat treatment effects on microstructure and properties of Cu–Ti–Fe alloys

inferred← citeshttps://doi.org/10.1016/j.msea.2025.148098openalex-snapshot

High-temperature pre-aging induced coherent precipitation for Concurrent strength and conductivity enhancement in Cu-Mn-Co-P alloys

inferred← citeshttps://doi.org/10.1016/j.msea.2026.150174openalex-snapshot

Constructing high performance heterostructures in LPBF fabricated CuCrZr alloy via grain boundary segregation engineering

inferred← citeshttps://doi.org/10.1016/j.msea.2026.150762openalex-snapshot

Achieving high strength and conductivity in a Cu–Cr–Zr alloy via multi-stage rolling and intermediate aging

inferred← citeshttps://doi.org/10.1016/j.mtcomm.2024.108580openalex-snapshot

Tuning heterogeneous geometric microstructure of Cu-based materials via powder metallurgy for improving high synergistic strengthening and electrical conductivity

inferred← citeshttps://doi.org/10.1016/j.mtcomm.2024.108611openalex-snapshot

Microstructural evolution and properties of a Cu-Fe-Mn-P alloys with high strength and high conductivity

inferred← citeshttps://doi.org/10.1016/j.mtcomm.2024.110513openalex-snapshot

Effect of Mg on microstructure and properties of Cu-Ni-Fe-P alloy with high strength and high conductivity

inferred← citeshttps://doi.org/10.1016/j.mtla.2026.102731openalex-snapshot

Synergistic enhancement of strength, electrical conductivity and wear resistance in powder metallurgy Cu-Ti alloy via thermomechanical processing

inferred← citeshttps://doi.org/10.1016/j.surfcoat.2026.133196openalex-snapshot

Aging strengthening and interface self–healing of cold–sprayed CuCrZr alloy coatings

inferred← citeshttps://doi.org/10.1016/j.wear.2026.206845openalex-snapshot

Al-modified Cu-15Ni-8Sn alloys: Tribo-glaze formation and enhanced anti-deformation capacity for high-temperature wear-resistant applications

inferred← citeshttps://doi.org/10.1134/s1029959924060067openalex-snapshot

Effect of Asymmetric Rolling on the Structure and Properties of Cu-Cr-Zr Alloys

inferred← citeshttps://doi.org/10.1515/rams-2025-0278openalex-snapshot

Copper Materials: properties, manufacturing, and future prospects

inferred← citeshttps://doi.org/10.2139/ssrn.4266767openalex-snapshot

Intelligent Design of High Strength and High Conductivity Copper Alloys Using Machine Learning Assisted by Genetic Algorithm

inferred← citeshttps://doi.org/10.2139/ssrn.5087287openalex-snapshot

Balancing the Electrical Conductivity and Mechanical Properties of Cu-3zr Alloy by In-Situ Synthesized Zrc and Thermomechanical Processing

inferred← citeshttps://doi.org/10.2139/ssrn.5383071openalex-snapshot

Balancing the Mechanical Properties and Electrical Conductivity of Cu-3zr Alloy by In-Situ Synthesized Zrc and Thermomechanical Processing

inferred← citeshttps://doi.org/10.3390/ma16103780openalex-snapshot

Influences of Cold Rolling and Aging on Microstructure and Property of CuCrSn Alloy

inferred← citeshttps://doi.org/10.3390/met14121360openalex-snapshot

Effects of Ti Addition on Microstructure, Mechanical Properties and Corrosion Resistance of the Cu-Zn-Ni Alloy

inferred← citeshttps://doi.org/10.35848/1347-4065/ad8451openalex-snapshot

Cu/AlN composite and functionally graded materials with high strength and high electrical- and thermal-conductivity fabricated by spark plasma sintering

Editorial review for independent work. ICSAC — the Institute for Complexity Science and Advanced Computing — runs a structured editorial panel for researchers publishing outside journals, and publishes on CiteStamp rails. Submission is free and goes through ORCID: icsacinstitute.org/submit.