On the public citation graph

Investigating the influence of the scanning rotation angle on the microstructure and properties of LPBFed CuCr0.8 alloy

https://doi.org/10.1016/j.jmapro.2022.10.073
0 signed · 55 inferred · view as graph

Inferred edges come from two machine sources: sweeps of open repository metadata (mostly SSRN and Zenodo), and a bulk OpenAlex citation snapshot. Every row below is labelled with the one it came from. Neither is a complete citation index — absence here is not evidence of absence.

Is this your work? Sign in with ORCID and put your name on the claims that are yours.
Claim with ORCID
Reference health. See whether every reference in this work resolves to a known work and none has been retracted — and get a dated CiteStamped badge you can embed.
See reference health

What this work says

Outgoing claims: the papers this work cites, builds on, or argues with.

inferredcites →https://doi.org/10.1007/bf02669380openalex-snapshot
Precipitation of chromium in copper and copper-nickel base alloys
inferredcites →https://doi.org/10.1007/s00170-019-04015-3openalex-snapshot
Limits and solutions in processing pure Cu via selective laser melting using a high-power single-mode fiber laser
inferredcites →https://doi.org/10.1007/s00170-019-04540-1openalex-snapshot
Effect of substrate material on the molten pool characteristics in selective laser melting of thin wall parts
inferredcites →https://doi.org/10.1007/s00170-020-05117-zopenalex-snapshot
Laser metal deposition of copper on diverse metals using green laser sources
inferredcites →https://doi.org/10.1016/j.actamat.2016.05.057openalex-snapshot
Origin of grain orientation during solidification of an aluminum alloy
inferredcites →https://doi.org/10.1016/j.actamat.2017.08.038openalex-snapshot
Localized melt-scan strategy for site specific control of grain size and primary dendrite arm spacing in electron beam additive manufacturing
inferredcites →https://doi.org/10.1016/j.addma.2016.05.007openalex-snapshot
Stress and deformation evaluations of scanning strategy effect in selective laser melting
inferredcites →https://doi.org/10.1016/j.addma.2018.11.028openalex-snapshot
Three-dimensional grain growth during multi-layer printing of a nickel-based alloy Inconel 718
inferredcites →https://doi.org/10.1016/j.addma.2021.102221openalex-snapshot
Prediction study on in-situ reduction of thermal stress using combined laser beams in laser powder bed fusion
inferredcites →https://doi.org/10.1016/j.ijmachtools.2019.103433openalex-snapshot
Effect of overlap rate and pattern on residual stress in selective laser melting
inferredcites →https://doi.org/10.1016/j.jallcom.2017.11.130openalex-snapshot
Direct metal laser melting of Inconel 718: Process impact on grain formation and orientation
inferredcites →https://doi.org/10.1016/j.jallcom.2019.03.082openalex-snapshot
Comprehensive effects of placement orientation and scanning angle on mechanical properties and behavior of 316L stainless steel based on the selective laser melting process
inferredcites →https://doi.org/10.1016/j.jallcom.2019.06.018openalex-snapshot
Microstructure and properties in QCr0.8 alloy produced by selective laser melting with different heat treatment
inferredcites →https://doi.org/10.1016/j.jallcom.2020.154350openalex-snapshot
Selective laser melting of Cu–Cr–Zr copper alloy: Parameter optimization, microstructure and mechanical properties
inferredcites →https://doi.org/10.1016/j.jallcom.2021.160459openalex-snapshot
Effect of construction angles on microstructure and mechanical properties of AlSi10Mg alloy fabricated by selective laser melting
inferredcites →https://doi.org/10.1016/j.jmapro.2020.01.052openalex-snapshot
CoCr alloy processed by Selective Laser Melting (SLM): effect of Laser Energy Density on microstructure, surface morphology, and hardness
inferredcites →https://doi.org/10.1016/j.jmrt.2020.06.090openalex-snapshot
Impact of layer rotation on micro-structure, grain size, surface integrity and mechanical behaviour of SLM Al-Si-10Mg alloy
inferredcites →https://doi.org/10.1016/j.matdes.2013.03.056openalex-snapshot
Effects of processing parameters on tensile properties of selective laser melted 304 stainless steel
inferredcites →https://doi.org/10.1016/j.matdes.2019.107815openalex-snapshot
Microstructures and electrical and mechanical properties of Cu-Cr alloys fabricated by selective laser melting
inferredcites →https://doi.org/10.1016/j.matlet.2018.11.118openalex-snapshot
Microstructure and properties of high strength and high conductivity Cu-Cr alloy components fabricated by high power selective laser melting
inferredcites →https://doi.org/10.1016/j.msea.2003.08.033openalex-snapshot
The effect of strain path and temperature on the microstructure developed in copper processed by ECAE
inferredcites →https://doi.org/10.1016/j.msea.2018.12.017openalex-snapshot
Effect of heat treatments on microstructure and properties of CuCrZr produced by laser-powder bed fusion
inferredcites →https://doi.org/10.1016/j.msea.2020.139879openalex-snapshot
Effect of scanning strategies on the microstructure and mechanical behavior of 316L stainless steel fabricated by selective laser melting
inferredcites →https://doi.org/10.1016/j.optlastec.2017.08.015openalex-snapshot
Influence of scan strategy and molten pool configuration on microstructures and tensile properties of selective laser melting additive manufactured aluminum based parts
inferredcites →https://doi.org/10.1016/j.powtec.2018.10.002openalex-snapshot
Selective Laser Melting of Cu 10Zn alloy powder using high laser power
inferredcites →https://doi.org/10.1016/j.procir.2018.08.030openalex-snapshot
Selective laser melting of pure Cu with a 1 kW single mode fiber laser
inferredcites →https://doi.org/10.1016/s0036-9748(88)80228-xopenalex-snapshot
Morphology of Cr precipitates in an overaged Cu-0.3% Cr alloy
inferredcites →https://doi.org/10.1016/s0924-0136(03)00755-6openalex-snapshot
Development and characterisation of direct laser sintering Cu-based metal powder
inferredcites →https://doi.org/10.1016/s1359-6454(96)00142-5openalex-snapshot
Strengthening in rapidly solidified age hardened CuCr and CuCrZr alloys
inferredcites →https://doi.org/10.1023/a:1004760014886openalex-snapshot
Strengthening mechanisms in a rapidly solidified and aged Cu-Cr alloy
inferredcites →https://doi.org/10.1073/pnas.10.2.57openalex-snapshot
The Scattering of X-Rays and Bragg's Law
inferredcites →https://doi.org/10.1080/14686996.2018.1527645openalex-snapshot
Microstructural characterization and properties of selective laser melted maraging steel with different build directions
inferredcites →https://doi.org/10.1115/1.4027729openalex-snapshot
Mechanical Anisotropy and Strain Rate Dependency Behavior of Ti6Al4V Produced Using E-Beam Additive Fabrication
inferredcites →https://doi.org/10.1121/1.4776777openalex-snapshot
ASME International Mechanical Engineering Congress and Exposition
inferredcites →https://doi.org/10.1515/9781501509285-014openalex-snapshot
10. Texture and Anisotropy
inferredcites →https://doi.org/10.18063/ijb.v8i1.478openalex-snapshot
Perspectives on Additive Manufacturing Enabled BetaTitanium Alloys for Biomedical Applications
inferredcites →https://doi.org/10.18063/msam.v1i1.4openalex-snapshot
Processing and characterization of crack-free 7075 aluminum alloys with elemental Zr modification by laser powder bed fusion
inferredcites →https://doi.org/10.5281/zenodo.1084582openalex-snapshot
Effect Of Friction Stir Welding On Microstructural And Mechanical Properties Of Copper Alloy

What points at this work

Incoming claims: where this work appears in other papers’ reference lists and arguments.

inferred← citeshttps://doi.org/10.2139/ssrn.4749155openalex-extracted
Effect of Scanning Tracks on the Contour Morphology and Dimensional Accuracy of the Fine Structure Manufactured by Selective Laser Melting
inferred← citeshttps://doi.org/10.1002/adem.202502065openalex-snapshot
Influence of Laser Powder Bed Fusion Parameters on Surface Characteristics and Mechanical Properties of 316L Porous Bone Scaffolds
inferred← citeshttps://doi.org/10.1007/s11661-023-07170-1openalex-snapshot
A Novel Biomedical Ti–35Nb–15Zr (At. Pct) Alloy In Situ Fabricated by Laser Powder Bed Fusion: Processing Window, Microstructure, and Mechanical Properties
inferred← citeshttps://doi.org/10.1007/s40964-025-00972-2openalex-snapshot
Effect of keyhole and lack-of-fusion pores on the anisotropic microstructure and mechanical properties of PBF-LB/M-produced CuCrZr alloy
inferred← citeshttps://doi.org/10.1016/j.jmapro.2026.01.091openalex-snapshot
Surface topography control in CoCrMo alloy additive manufacturing through laser powder bed fusion process
inferred← citeshttps://doi.org/10.1016/j.jmrt.2024.09.178openalex-snapshot
Influence of laser absorptivity of CuCr0.8 substrate surface state on the characteristics of laser directed energy deposition inconel 718 single track
inferred← citeshttps://doi.org/10.1016/j.jmrt.2024.10.104openalex-snapshot
Size effects and optimization during laser directed energy deposition on high thermal conductivity copper alloys
inferred← citeshttps://doi.org/10.1016/j.matchar.2023.113015openalex-snapshot
Influence of the thermal conductivity of different CuCr0.8 substrate state on the formability of laser directed energy deposition Inconel718 single track
inferred← citeshttps://doi.org/10.1016/j.matdes.2025.113742openalex-snapshot
Current trends in electron beam and laser powder bed fusion additive manufacturing of copper alloys: Composition, defects, properties, and challenges
inferred← citeshttps://doi.org/10.1016/j.matdes.2026.115769openalex-snapshot
Enhancing microsegregation during rapid directional solidification through ternary microalloying
inferred← citeshttps://doi.org/10.1016/j.msea.2025.147838openalex-snapshot
Pursued strength-ductility synergy in Ni superalloys produced by laser powder bed fusion: Crystallographic lamellar versus Directionally solidified microstructure
inferred← citeshttps://doi.org/10.1016/j.optlastec.2024.111270openalex-snapshot
Effect of scanning tracks on the contour morphology and dimensional accuracy of the fine structure manufactured by laser powder bed fusion
inferred← citeshttps://doi.org/10.1088/1402-4896/ad87c9openalex-snapshot
Crack inhibition to enhance the tensile and impact strength of additively manufactured CuCrZr alloy
inferred← citeshttps://doi.org/10.1098/rspa.2022.0386openalex-snapshot
A rational approach to beam path planning in additive manufacturing: the inverse heat placement problem
inferred← citeshttps://doi.org/10.1108/rpj-11-2025-0616openalex-snapshot
A sustainable strategy to improve the wear resistance of direct metal Laster sintering based AlSi10Mg parts through the use of leftover powder
inferred← citeshttps://doi.org/10.2139/ssrn.4266767openalex-snapshot
Intelligent Design of High Strength and High Conductivity Copper Alloys Using Machine Learning Assisted by Genetic Algorithm
inferred← citeshttps://doi.org/10.3390/cryst14110976openalex-snapshot
On the Peculiarities of Wire-Feed Electron Beam Additive Manufacturing (WEBAM) of Nickel Alloy–Copper Bimetal Nozzle Samples
Editorial review for independent work. ICSAC — the Institute for Complexity Science and Advanced Computing — runs a structured editorial panel for researchers publishing outside journals, and publishes on CiteStamp rails. Submission is free and goes through ORCID: icsacinstitute.org/submit.