On the public citation graph
Extension of Oxley's predictive machining theory for Johnson and Cook flow stress model
0 signed · 187 inferred · view as graph
Inferred edges come from two machine sources: sweeps of open repository metadata (mostly SSRN and Zenodo), and a bulk OpenAlex citation snapshot. Every row below is labelled with the one it came from. Neither is a complete citation index — absence here is not evidence of absence.
Is this your work? Sign in with ORCID and put your name on the
claims that are yours.
Reference health. See whether every reference in this work resolves to a
known work and none has been retracted — and get a dated CiteStamped
badge you can embed.
What this work says
Outgoing claims: the papers this work cites, builds on, or argues with.
inferredcites →https://doi.org/10.1016/s0007-8506(07)60030-4openalex-snapshot
Testing and Modelling of Material Response to Deformation in Bulk Metal Forming
inferredcites →https://doi.org/10.1016/s0007-8506(07)63267-3openalex-snapshot
Predicting the Effects of Very High Cutting Speeds on Cutting Forces, etc.
inferredcites →https://doi.org/10.1016/s0890-6955(02)00185-2openalex-snapshot
Cutting forces modeling considering the effect of tool thermal property—application to CBN hard turning
inferredcites →https://doi.org/10.1016/s0924-0136(01)01228-6openalex-snapshot
Material behaviour in conditions similar to metal cutting: flow stress in the primary shear zone
inferredcites →https://doi.org/10.1038/nrm3209openalex-snapshot
Microtubule nucleation by γ-tubulin complexes
inferredcites →https://doi.org/10.1080/10940340008945720openalex-snapshot
ASSESSMENT OF MACHINING MODELS: PROGRESS REPORT
inferredcites →https://doi.org/10.1115/1.1617287openalex-snapshot
Extension of Oxley’s Analysis of Machining to Use Different Material Models
inferredcites →https://doi.org/10.1115/1.2118767openalex-snapshot
A Methodology to Determine Work Material Flow Stress and Tool-Chip Interfacial Friction Properties by Using Analysis of Machining
inferredcites →https://doi.org/10.1115/1.2162590openalex-snapshot
Predictive Analytical and Thermal Modeling of Orthogonal Cutting Process—Part I: Predictions of Tool Forces, Stresses, and Temperature Distributions
inferredcites →https://doi.org/10.1115/1.2888318openalex-snapshot
Mechanics of Machining: An Analytical Approach to Assessing Machinability
inferredcites →https://doi.org/10.1115/1.3667441openalex-snapshot
Metal-Cutting Analysis—II: New Parameters
inferredcites →https://doi.org/10.1115/1.4009510openalex-snapshot
A Velocity-Modified Temperature for the Plastic Flow of Metals
inferredcites →https://doi.org/10.1115/1.4010357openalex-snapshot
The Theory of Plasticity Applied to a Problem of Machining
inferredcites →https://doi.org/10.1243/pime_proc_1963_177_058_02openalex-snapshot
Temperatures in Orthogonal Metal Cutting
What points at this work
Incoming claims: where this work appears in other papers’ reference lists and arguments.
inferred← citeshttps://doi.org/10.2139/ssrn.4682291openalex-extracted
Research on Cutting Energy Consumption Model of Micro-Texture Tools
inferred← citeshttps://doi.org/10.1002/msd2.12032openalex-snapshot
Dynamics of chip formation during the cutting process using imaging techniques: A review
inferred← citeshttps://doi.org/10.1007/978-3-031-99501-9_6openalex-snapshot
An Innovative Mechanistic-Thermal Model for Studying the Effect of MQL in Peck Drilling
inferred← citeshttps://doi.org/10.1007/978-3-319-22449-7_22openalex-snapshot
A Study on the Generation of a Fine-Grained Layer in Upsetting Between Flat and Conical Dies
inferred← citeshttps://doi.org/10.1007/978-3-642-28085-6openalex-snapshot
Hybrid Modeling and Optimization of Manufacturing
inferred← citeshttps://doi.org/10.1007/978-3-642-28085-6_2openalex-snapshot
Finite Element in Manufacturing Processes
inferred← citeshttps://doi.org/10.1007/978-981-19-7087-0_3openalex-snapshot
Force-Temperature Coupled Prediction Model
inferred← citeshttps://doi.org/10.1007/s00170-010-2940-8openalex-snapshot
Analytical prediction of cutting forces in orthogonal cutting using unequal division shear-zone model
inferred← citeshttps://doi.org/10.1007/s00170-013-5271-8openalex-snapshot
A new analytical tool-chip friction model in dry cutting
inferred← citeshttps://doi.org/10.1007/s00170-014-6361-yopenalex-snapshot
Improvement of algorithm and prediction precision of an extended Oxley’s theoretical model
inferred← citeshttps://doi.org/10.1007/s00170-015-7888-2openalex-snapshot
An analytical force model for ball-end milling based on a predictive machining theory considering cutter runout
inferred← citeshttps://doi.org/10.1007/s00170-015-8171-2openalex-snapshot
Investigation on notch wear mechanism in finish turning pure iron material with uncoated carbide tools under different cooling/lubrication conditions
inferred← citeshttps://doi.org/10.1007/s00170-016-9155-6openalex-snapshot
Applying extended Oxley’s machining theory and particle swarm optimization to model machining forces
inferred← citeshttps://doi.org/10.1007/s00170-016-9717-7openalex-snapshot
A modified parallel-sided shear zone model for determining material constitutive law
inferred← citeshttps://doi.org/10.1007/s00170-017-0357-3openalex-snapshot
A unified analytical cutting force model for variable helix end mills
inferred← citeshttps://doi.org/10.1007/s00170-018-2178-4openalex-snapshot
Inverse determination of improved constitutive equation for cutting titanium alloy Ti-6Al-4V based on finite element analysis
inferred← citeshttps://doi.org/10.1007/s00170-018-2587-4openalex-snapshot
An analytical study on residual stresses in drilling of hardened steel
inferred← citeshttps://doi.org/10.1007/s00170-018-2889-6openalex-snapshot
Analytical modeling of machining forces of ultra-fine-grained titanium
inferred← citeshttps://doi.org/10.1007/s00170-018-2962-1openalex-snapshot
Methodology to establish a hybrid model for prediction of cutting forces and chip thickness in orthogonal cutting condition close to broaching
inferred← citeshttps://doi.org/10.1007/s00170-018-3015-5openalex-snapshot
Characterizing the effect of process variables on energy consumption in end milling
inferred← citeshttps://doi.org/10.1007/s00170-019-03366-1openalex-snapshot
Prediction model, simulation, and experimental validation on thrust force and torque in drilling SiCp/Al6063
inferred← citeshttps://doi.org/10.1007/s00170-019-03415-9openalex-snapshot
A comparative study of analytical thermal models to predict the orthogonal cutting temperature of AISI 1045 steel
inferred← citeshttps://doi.org/10.1007/s00170-019-04225-9openalex-snapshot
Predicting the Johnson Cook constitutive model constants using temperature rise distribution in plane strain machining
inferred← citeshttps://doi.org/10.1007/s00170-019-04244-6openalex-snapshot
Deep-hole gun drilling mechanics model of Ti6Al4V alloy based on Johnson and Cook flow stress model
inferred← citeshttps://doi.org/10.1007/s00170-019-04704-zopenalex-snapshot
Microstructure prediction in low and high strain deformation of Al6063 using artificial neural network and finite element simulation
inferred← citeshttps://doi.org/10.1007/s00170-020-05093-4openalex-snapshot
Modeling of temperature distribution in turning of Ti-6Al-4V with liquid nitrogen cooling
inferred← citeshttps://doi.org/10.1007/s00170-020-05273-2openalex-snapshot
Predicting cutting force with unequal division parallel-sided shear zone model for orthogonal cutting
inferred← citeshttps://doi.org/10.1007/s00170-020-05943-1openalex-snapshot
A hybrid model for force prediction in orthogonal cutting with chamfered tools considering size and edge effect
inferred← citeshttps://doi.org/10.1007/s00170-020-06521-1openalex-snapshot
Analytical multi-physics model of microstructure changes in hard turning of AISI 52100 steel: prediction of thicknesses of white and dark layers
inferred← citeshttps://doi.org/10.1007/s00170-021-06643-0openalex-snapshot
Theoretical and experimental studies of chatter in turning and machining stainless steel workpiece
inferred← citeshttps://doi.org/10.1007/s00170-021-07078-3openalex-snapshot
A new energy consumption model suitable for processing multiple materials in end milling
inferred← citeshttps://doi.org/10.1007/s00170-021-07130-2openalex-snapshot
Thermomechanical finite element simulation and correlation analysis for orthogonal cutting of normalized AISI 9310 steels
inferred← citeshttps://doi.org/10.1007/s00170-021-08021-2openalex-snapshot
Determination of thermal material properties for the numerical simulation of cutting processes
inferred← citeshttps://doi.org/10.1007/s00170-021-08114-yopenalex-snapshot
Analytical modeling and prediction of cutting forces in orthogonal turning: a review
inferred← citeshttps://doi.org/10.1007/s00170-021-08640-9openalex-snapshot
A combined experimental and numerical approach that eliminates the non-uniqueness associated with the Johnson-Cook parameters obtained using inverse methods
inferred← citeshttps://doi.org/10.1007/s00170-023-10877-5openalex-snapshot
Estimation of temperature in the cutting area during orthogonal turning of grade 2 titanium
inferred← citeshttps://doi.org/10.1007/s00170-023-12374-1openalex-snapshot
Identification of rheological parameters and numerical simulation for orthogonal machining of AISI 52100 hard steel
inferred← citeshttps://doi.org/10.1007/s00170-024-13550-7openalex-snapshot
Effect of texture location in tool-chip friction region on cutting performance in turning AISI 304
inferred← citeshttps://doi.org/10.1007/s00170-025-15835-xopenalex-snapshot
Finite element investigation on shear deformation and cutting force for two types of elliptical vibration cutting Ti6Al4V alloy
inferred← citeshttps://doi.org/10.1007/s00170-025-16399-6openalex-snapshot
Thermo-mechanical coupling milling force model considering the dynamic recrystallization behavior of Inconel 718
inferred← citeshttps://doi.org/10.1007/s00707-015-1499-8openalex-snapshot
Heat generation in plane strain compression of a thin rigid plastic layer
inferred← citeshttps://doi.org/10.1007/s10704-015-0065-7openalex-snapshot
On the nonexistence of certain solutions for damage mechanics models
inferred← citeshttps://doi.org/10.1007/s10999-024-09713-9openalex-snapshot
FEM-supported machine learning for residual stress and cutting force analysis in micro end milling of aluminum alloys
inferred← citeshttps://doi.org/10.1007/s11431-024-2840-4openalex-snapshot
Cutting force modeling in high-speed machining of selective laser melted Ti6Al4V alloys based on a modified constitutive model considering thermally activated effect
inferred← citeshttps://doi.org/10.1007/s12046-024-02585-xopenalex-snapshot
Force modeling and experimental investigations on machinability of SDSS 2507 under dry turning conditions using CVD TiCN-Al2O3 coated tools
inferred← citeshttps://doi.org/10.1007/s12206-022-0231-6openalex-snapshot
Analytical modeling of work hardening of duplex steel alloys in the milling process
inferred← citeshttps://doi.org/10.1007/s12541-015-0103-4openalex-snapshot
A study on cutting and tribology performances of TiN and TiAlN coated tools
inferred← citeshttps://doi.org/10.1007/s12541-019-00111-2openalex-snapshot
Replacement of Hazard Lubricants by Green Coolant in Machining of Ti6Al4V: A 3D FEM Approach
inferred← citeshttps://doi.org/10.1007/s12666-019-01734-9openalex-snapshot
Determination and Verification of Johnson–Cook Parameters for 430 Ferritic Steels via Different Gage Lengths
inferred← citeshttps://doi.org/10.1007/s13369-023-08656-1openalex-snapshot
Improvement of the Unequal Division Shear Zone Model Based on Sensitivity Analysis and Classification of Uncertain Parameters
inferred← citeshttps://doi.org/10.1007/s13369-024-09163-7openalex-snapshot
Analytical Modeling Methods in Machining: A State of the Art on Application, Recent Challenges, and Future Trends
inferred← citeshttps://doi.org/10.1007/s40032-017-0372-zopenalex-snapshot
Force Modelling in Orthogonal Cutting Considering Flank Wear Effect
inferred← citeshttps://doi.org/10.1007/s40430-016-0514-xopenalex-snapshot
Cutting temperature analysis considering the improved Oxley’s predictive machining theory
inferred← citeshttps://doi.org/10.1007/s42242-019-00044-9openalex-snapshot
Constitutive modeling of ultra-fine-grained titanium flow stress for machining temperature prediction
inferred← citeshttps://doi.org/10.1016/j.cirp.2022.04.067openalex-snapshot
An analytical model for the optimized design of micro-textured cutting tools
inferred← citeshttps://doi.org/10.1016/j.cirp.2026.04.050openalex-snapshot
Effect of process-induced anisotropy on flow stress characterization and chip formation in the machining of extrusion-based additively manufactured stainless steels
inferred← citeshttps://doi.org/10.1016/j.cirpj.2019.06.001openalex-snapshot
Utilizing the drill cutting lip to extract Johnson Cook flow stress parameters for Al6061-T6
inferred← citeshttps://doi.org/10.1016/j.cirpj.2021.03.002openalex-snapshot
Analytical modeling of metal cutting process with self-propelled rotary tools
inferred← citeshttps://doi.org/10.1016/j.cirpj.2024.12.005openalex-snapshot
Precise modeling of cutting forces based on domain adaptation extreme learning machine under small sample conditions
inferred← citeshttps://doi.org/10.1016/j.cirpj.2026.02.002openalex-snapshot
A predictive thermomechanical model for peck drilling
inferred← citeshttps://doi.org/10.1016/j.cirpj.2026.09.020openalex-snapshot
Constitutive modelling and machining behavior of wrought and FFF-produced stainless steels via direct and inverse parameter identification
inferred← citeshttps://doi.org/10.1016/j.cja.2023.03.004openalex-snapshot
Conventional and micro scale finite element modeling for metal cutting process: A review
inferred← citeshttps://doi.org/10.1016/j.cjme.2026.100398openalex-snapshot
Experimental Investigation of Machining Deformation in Turning Thin-Walled Stainless Steel Parts under Liquid Nitrogen Cooling
inferred← citeshttps://doi.org/10.1016/j.commatsci.2011.07.035openalex-snapshot
Determination of Johnson–Cook parameters from machining simulations
inferred← citeshttps://doi.org/10.1016/j.diamond.2024.111118openalex-snapshot
Analytical model of modified diamond tools temperature by focused ion beam in dry diamond turning
inferred← citeshttps://doi.org/10.1016/j.dt.2019.07.004openalex-snapshot
Prediction and optimization of machining forces using oxley's predictive theory and RSM approach during machining of WHAs
inferred← citeshttps://doi.org/10.1016/j.engstruct.2022.114754openalex-snapshot
Investigation of thermal behaviour of structural steel S235N under laser cutting process: Experimental, analytical, and numerical studies
inferred← citeshttps://doi.org/10.1016/j.eswa.2025.126967openalex-snapshot
Domain adaptation extreme learning machines for regression and their application in precise modeling of cutting forces under small sample conditions
inferred← citeshttps://doi.org/10.1016/j.ijmachtools.2013.05.007openalex-snapshot
Investigations of yield stress, fracture toughness, and energy distribution in high speed orthogonal cutting
inferred← citeshttps://doi.org/10.1016/j.ijmachtools.2015.10.006openalex-snapshot
Effect of dynamic recrystallization at tool-chip interface on accelerating tool wear during high-speed cutting of AISI1045 steel
inferred← citeshttps://doi.org/10.1016/j.ijmecsci.2015.03.015openalex-snapshot
Application of a new thick zone model to the cutting mechanics during end-milling
inferred← citeshttps://doi.org/10.1016/j.ijmecsci.2017.08.054openalex-snapshot
Improved analytical prediction of chip formation in orthogonal cutting of titanium alloy Ti6Al4V
inferred← citeshttps://doi.org/10.1016/j.ijmecsci.2020.106246openalex-snapshot
Mechanisms and predictive force models for machining with rake face textured cutting tools under orthogonal cutting conditions
inferred← citeshttps://doi.org/10.1016/j.ijmecsci.2025.110592openalex-snapshot
Machining residual stress model with shear zones defined as Eulerian boundaries
inferred← citeshttps://doi.org/10.1016/j.ijthermalsci.2013.05.014openalex-snapshot
Modeling temperature of non-equidistant primary shear zone in metal cutting
inferred← citeshttps://doi.org/10.1016/j.jestch.2020.02.001openalex-snapshot
Numerical and experimental investigation of cutting forces in turning of Nimonic 80A superalloy
inferred← citeshttps://doi.org/10.1016/j.jmapro.2012.11.004openalex-snapshot
Analytical modelling of residual stresses in orthogonal machining of AISI4340 steel
inferred← citeshttps://doi.org/10.1016/j.jmapro.2019.07.026openalex-snapshot
Fabrication of high aspect ratio microgroove on Ti6Al4V by laser-induced oxidation assisted micro milling
inferred← citeshttps://doi.org/10.1016/j.jmapro.2019.09.036openalex-snapshot
Incorporating dual BCC/FCC Zerilli-Armstrong and blue brittleness constitutive material models into Oxley’s machining shear zone theory
inferred← citeshttps://doi.org/10.1016/j.jmapro.2020.04.083openalex-snapshot
Exit burr height mechanistic modeling and experimental validation for low-frequency vibration-assisted drilling of aluminum 7075-T6 alloy
inferred← citeshttps://doi.org/10.1016/j.jmapro.2020.09.034openalex-snapshot
Three-dimensional turning force prediction based on hybrid finite element and predictive machining theory considering edge radius and nose radius
inferred← citeshttps://doi.org/10.1016/j.jmapro.2023.05.029openalex-snapshot
Modeling energy consumption inside cutting deformation zone to predict the stress distributions, temperature and microstructure by micro irreversible entropic thermodynamics
inferred← citeshttps://doi.org/10.1016/j.jmapro.2023.09.007openalex-snapshot
A modified constitutive model considering dynamic recrystallization behavior for cutting Inconel 718
inferred← citeshttps://doi.org/10.1016/j.jmapro.2023.09.015openalex-snapshot
An enhanced semi-analytical estimation of tool-chip interface temperature in metal cutting
inferred← citeshttps://doi.org/10.1016/j.jmapro.2024.04.014openalex-snapshot
A novel simulation methodology for orthogonal cryogenic machining with CFD spray cooling integration
inferred← citeshttps://doi.org/10.1016/j.jmapro.2026.05.013openalex-snapshot
Analysis of machining performance in ultrasonic-assisted drilling of Al6061 using a micro-textured drill bit: A validated finite element method
inferred← citeshttps://doi.org/10.1016/j.jmatprotec.2019.05.015openalex-snapshot
An analytical model of residual stress in orthogonal cutting based on the radial return method
inferred← citeshttps://doi.org/10.1016/j.jmatprotec.2019.116389openalex-snapshot
Quasi-static finite element modelling of thermal distribution and heat partitioning for the multi-component system of high speed metal cutting
inferred← citeshttps://doi.org/10.1016/j.jmatprotec.2020.116982openalex-snapshot
Extracting HCP Zerilli-Armstrong material parameters for magnesium alloy AZ31B from orthogonal cutting tests
inferred← citeshttps://doi.org/10.1016/j.jmrt.2020.03.045openalex-snapshot
Verification of Johnson-Cook parameters of ferritic stainless steel by drilling process: experimental and finite element simulations
inferred← citeshttps://doi.org/10.1016/j.matpr.2017.11.326openalex-snapshot
Modeling of flank wear progression for coated cubic boron nitride tool during hard turning of AISI H11steel
inferred← citeshttps://doi.org/10.1016/j.matpr.2019.07.019openalex-snapshot
Significance Of Slip Line Field Model In Accommodating All Machining Complex Behaviour
inferred← citeshttps://doi.org/10.1016/j.matpr.2023.04.693openalex-snapshot
Milling force modelling with high-pressure cooling strategy: An integrated analytical approach
inferred← citeshttps://doi.org/10.1016/j.measurement.2023.113365openalex-snapshot
Surface roughness prediction in ball screw whirlwind milling considering elastic-plastic deformation caused by cutting force: Modelling and verification
inferred← citeshttps://doi.org/10.1016/j.measurement.2026.121115openalex-snapshot
Zero-shot cutting power modeling for target workpiece materials using limited experimental data from source materials
inferred← citeshttps://doi.org/10.1016/j.procir.2013.06.105openalex-snapshot
Thermal Analysis of the Chip Formation in Austenitic Stainless Steel
inferred← citeshttps://doi.org/10.1016/j.procir.2015.03.012openalex-snapshot
Inverse Determination of Constitutive Equations and Cutting Force Modelling for Complex Tools Using Oxley's Predictive Machining Theory
inferred← citeshttps://doi.org/10.1016/j.procir.2015.03.014openalex-snapshot
Analysis of Cutting Stability in Vibration Assisted Machining Using Ananalytical Predictive Force Model
inferred← citeshttps://doi.org/10.1016/j.procir.2015.04.093openalex-snapshot
Numerical Model of Machining Considering the Effect of MnS Inclusions in an Austenitic Stainless Steel
inferred← citeshttps://doi.org/10.1016/j.procir.2020.02.078openalex-snapshot
Modeling and analysis of residual stress in dynamic orthogonal cutting
inferred← citeshttps://doi.org/10.1016/j.procir.2023.03.004openalex-snapshot
iMFREE: A versatile software tool for modelling machining processes with particle methods
inferred← citeshttps://doi.org/10.1016/j.procir.2024.05.031openalex-snapshot
Inverse analysis of machining residual stress based on hybrid model
inferred← citeshttps://doi.org/10.1016/j.rcim.2016.10.006openalex-snapshot
Using FEM simulations of cutting for evaluating the performance of different johnson cook parameter sets acquired with inverse methods
inferred← citeshttps://doi.org/10.1016/j.rineng.2022.100789openalex-snapshot
An improved thermomechanical modeling for orthogonal cutting of AISI 1045 steel
inferred← citeshttps://doi.org/10.1016/j.simpat.2015.09.009openalex-snapshot
Inverse identification of flow stress in metal cutting process using Response Surface Methodology
inferred← citeshttps://doi.org/10.1016/j.simpat.2019.03.006openalex-snapshot
Finite-element-analysis of the effect of different wiper tool edge geometries during the hard turning of AISI 4340 steel
inferred← citeshttps://doi.org/10.1016/j.triboint.2025.111076openalex-snapshot
Investigations on enhancing tool performance through powder-mixed micro-EDM texturing to address the tribological challenges while machining Ti6Al4V
inferred← citeshttps://doi.org/10.1016/j.tws.2019.04.026openalex-snapshot
Coupled thermal–structural analysis and multi-objective optimization of a cutting-type energy-absorbing structure for subway vehicles
inferred← citeshttps://doi.org/10.1016/j.wear.2016.08.007openalex-snapshot
An FEM-based approach for tool wear estimation in machining
inferred← citeshttps://doi.org/10.1016/j.ymssp.2025.113794openalex-snapshot
Physical model-embedded neural network for milling surface roughness monitoring via spindle current signals
inferred← citeshttps://doi.org/10.1016/j.ymssp.2026.114228openalex-snapshot
PrecisionPINN-ABKDE: uncertainty-weighted physics-informed neural network with adaptive bandwidth kernel density estimation for milling surface roughness prediction
inferred← citeshttps://doi.org/10.1038/s41598-024-71671-1openalex-snapshot
Parameter identification of Johnson–Cook constitutive model based on genetic algorithm and simulation analysis for 304 stainless steel
inferred← citeshttps://doi.org/10.1080/10426914.2014.901521openalex-snapshot
Effect of Ultrasonic Vibrations on Chip–Tool Contact Zone in Turning of AISI304
inferred← citeshttps://doi.org/10.1080/10910344.2014.991026openalex-snapshot
Further Development of Oxley’s Predictive Force Model for Orthogonal Cutting
inferred← citeshttps://doi.org/10.1080/10910344.2015.1051541openalex-snapshot
Error Analysis for Finite Element Simulation of Orthogonal Cutting and its Validation Via Quick Stop Experiments
inferred← citeshttps://doi.org/10.1080/10910344.2017.1283956openalex-snapshot
Predictive analytical modeling of cutting forces generated by high-speed machining of ductile and hard metals
inferred← citeshttps://doi.org/10.1080/10910344.2020.1771571openalex-snapshot
Study on the constitutive model of anisotropic aluminum alloy in high speed cutting
inferred← citeshttps://doi.org/10.1080/10910344.2025.2595599openalex-snapshot
Extension of the cutting analytical thermal modeling: accounting for heat generation due to plastic deformation at tool-chip interface
inferred← citeshttps://doi.org/10.1080/10910344.2026.2616683openalex-snapshot
Research on the thermomechanical field modeling and microstructural evolution during cutting AISI9310
inferred← citeshttps://doi.org/10.1088/1742-6596/885/1/012018openalex-snapshot
A numerical solution for the axisymmetric flow of a plastic tube on a rigid fibre
inferred← citeshttps://doi.org/10.1088/1757-899x/103/1/012028openalex-snapshot
The experiments for mechanical properties of 20Cr2Ni4 steel and the coefficient definition of constitutive equation
inferred← citeshttps://doi.org/10.1088/2631-8695/ad3611openalex-snapshot
Modification of extended Oxley’s predictive machining theory and determination of Johnson-Cook material model constants by inverse approach
inferred← citeshttps://doi.org/10.1088/2631-8695/ad58a2openalex-snapshot
Implementation of exact thermal analysis in extended Oxley’s predictive machining theory
inferred← citeshttps://doi.org/10.1109/atc67618.2025.11268732openalex-snapshot
A Multiphysics 3D Cutting Force Model for End Milling Considering Thermal Effects Based on Extended Oxley–Johnson-Cook Model
inferred← citeshttps://doi.org/10.1109/tmech.2020.2991421openalex-snapshot
Digital Image Correlation Based on Primary Shear Band Model for Reconstructing Displacement, Strain, and Stress Fields in Orthogonal Cutting
inferred← citeshttps://doi.org/10.1115/1.4006768openalex-snapshot
Modified Primary Shear Zone Analysis for Identification of Material Mechanical Behavior During Machining Process Using Genetic Algorithm
inferred← citeshttps://doi.org/10.1115/1.4007464openalex-snapshot
A Metallo-Thermomechanically Coupled Analysis of Orthogonal Cutting of AISI 1045 Steel
inferred← citeshttps://doi.org/10.1115/1.4033992openalex-snapshot
Machining Setting Optimization for Formate® Face-Hobbing of Bevel Gears With the Cutting Force and Tool Wear Constraints
inferred← citeshttps://doi.org/10.1115/1.4036994openalex-snapshot
Subsurface Deformation Generated by Orthogonal Cutting: Analytical Modeling and Experimental Verification
inferred← citeshttps://doi.org/10.1115/1.4047738openalex-snapshot
An Alternate Approach to SHPB Tests to Compute Johnson-Cook Material Model Constants for 97 WHA at High Strain Rates and Elevated Temperatures Using Machining Tests
inferred← citeshttps://doi.org/10.1115/1.4049848openalex-snapshot
A Comprehensive Experiment-Based Approach to Generate Stress Field and Slip Lines in Cutting Process
inferred← citeshttps://doi.org/10.1115/1.4052706openalex-snapshot
Modeling of Residual Stresses by Correlating Surface Topography in Machining of AISI 52100 Steel
inferred← citeshttps://doi.org/10.1115/1.4066976openalex-snapshot
A New Cutting Mechanics Model for Improved Shear Angle Prediction in Orthogonal Cutting Process
inferred← citeshttps://doi.org/10.1139/tcsme-2023-0066openalex-snapshot
On modelling the cutting forces and impact resistance of honed milling tools
inferred← citeshttps://doi.org/10.1139/tcsme-2024-0085openalex-snapshot
Development of an analytical model to investigate the effect of tool geometry and cutting parameters on the milling performance of Inconel 718
inferred← citeshttps://doi.org/10.1142/s0219686723500087openalex-snapshot
Orthogonal Cutting Force Modeling Using the Nonequipartition Parallel Shear-Zone Distribution Model
inferred← citeshttps://doi.org/10.11606/t.3.2014.tde-12122014-153825openalex-snapshot
Estudo do comportamento mecânico na usinagem de aços inoxidáveis.
inferred← citeshttps://doi.org/10.11606/t.3.2016.tde-08072016-151235openalex-snapshot
Estudo do processo de formação do cavaco durante o torneamento e sua relação com a microestrutura utilizando o método dos elementos finitos.
inferred← citeshttps://doi.org/10.1177/0954405412450380openalex-snapshot
A phenomenological modeling of deformation during metal cutting: a modified thick shear zone analysis
inferred← citeshttps://doi.org/10.1177/0954405414560620openalex-snapshot
Determination of material model parameters from orthogonal cutting experiments
inferred← citeshttps://doi.org/10.1177/0954405415599927openalex-snapshot
Analysis and optimization of cutter geometric parameters for surface integrity in milling titanium alloy using a modified grey–Taguchi method
inferred← citeshttps://doi.org/10.1177/0954405419864003openalex-snapshot
Inverse identification of modified Johnson–Cook model for cutting titanium alloy Ti6Al4V using firefly algorithm
inferred← citeshttps://doi.org/10.12989/scs.2015.19.6.1467openalex-snapshot
Development of new predictive analysis in the orthogonal metal cutting process by utilization of Oxley's machining theory
inferred← citeshttps://doi.org/10.1520/mpc20200041openalex-snapshot
Determination of Constitutive Material Model Constants for Ti6Al4V Alloy at Near Orthogonal Machining Conditions
inferred← citeshttps://doi.org/10.2139/ssrn.5073645openalex-snapshot
Milling Surface Roughness Monitoring Based on the Neural Network Embedded in Physical Model
inferred← citeshttps://doi.org/10.2139/ssrn.5279114openalex-snapshot
Physical Model-Embedded Neural Network for Milling Surface Roughness Monitoring Via Spindle Current Signals
inferred← citeshttps://doi.org/10.21741/9781644902479-142openalex-snapshot
Analytical method for determining cutting forces during orthogonal turning of C45 steel
inferred← citeshttps://doi.org/10.29130/dubited.485087openalex-snapshot
Ferritik Paslanmaz Çeliğin Malzeme Yapısal Denklem Parametrelerinin Belirlenmesi ve Doğrulanması
inferred← citeshttps://doi.org/10.29391/2024.103.014openalex-snapshot
An Analytical Model of Material Deformation During Friction Welding of Alloy 718
inferred← citeshttps://doi.org/10.30564/jmmr.v4i2.4094openalex-snapshot
Investigation and Mathematical Modelling of Optimized Cutting Parameters for Surface Roughness of EN-8 Alloy Steel
inferred← citeshttps://doi.org/10.32393/csme.2020.1277openalex-snapshot
An Oxley-based Force Model for Milling of Hardened Steel Using Indexable Milling Tools
inferred← citeshttps://doi.org/10.3311/ppme.7516openalex-snapshot
Experimental Model for the Main Cutting Force in Face Milling of a High Strength Structural Steel
inferred← citeshttps://doi.org/10.3390/applmech3030051openalex-snapshot
A New Algorithm to Solve the Extended-Oxley Analytical Model of Orthogonal Metal Cutting in Python
inferred← citeshttps://doi.org/10.3390/coatings16040427openalex-snapshot
Analysis of Cutting Equation for Micro-Groove Tool and Its Impact on Shear Angle and Cutting Force in Tuning AISI201
inferred← citeshttps://doi.org/10.3390/ma12020284openalex-snapshot
Predictive Modeling of Machining Temperatures with Force–Temperature Correlation Using Cutting Mechanics and Constitutive Relation
inferred← citeshttps://doi.org/10.3390/ma14154328openalex-snapshot
Experimental-Analytical Method for Temperature Determination in the Cutting Zone during Orthogonal Turning of GRADE 2 Titanium Alloy
inferred← citeshttps://doi.org/10.3390/ma17174274openalex-snapshot
Inverse Identification of Constitutive Model for GH4198 Based on Genetic–Particle Swarm Algorithm
inferred← citeshttps://doi.org/10.3390/ma18061339openalex-snapshot
Two-Dimensional Finite Element Analysis and Cutting Force Model for the Cutting of Circular Steel Bars Using Negative Rake Angle Cutters: Accounting for Chip Accumulation Effects
inferred← citeshttps://doi.org/10.3390/met13101750openalex-snapshot
Improvement of Analytical Model for Oblique Cutting—Part I: Identification of Mechanical Characteristics of Machined Material
inferred← citeshttps://doi.org/10.3390/met9040473openalex-snapshot
Determination of Johnson–Cook Constitutive Parameters for Cutting Simulations
inferred← citeshttps://doi.org/10.3390/mi16050534openalex-snapshot
Chip Formation Mechanisms When Cutting Amorphous Alloy with Cubic Boron Nitride Tools Based on Constitutive Equation Parameter Optimisation
inferred← citeshttps://doi.org/10.35840/2631-5076/9212openalex-snapshot
Numerical Analysis Conducted During the Study on the Impact of Tool-Chip Contact Time on the Shear Angle in Orthogonal Machining
inferred← citeshttps://doi.org/10.36897/jme/147201openalex-snapshot
Cutting Force Prediction of Ti6Al4V using a Machine Learning Model of SPH Orthogonal Cutting Process Simulations
inferred← citeshttps://doi.org/10.3923/jas.2016.98.102openalex-snapshot
Temperature Fields Near Maximum Friction Surfaces in Pressure-Dependent Plasticity
inferred← citeshttps://doi.org/10.4018/978-1-7998-4939-1.ch010openalex-snapshot
Triple Bottom Line-Focused Optimization of Oblique Turning Processes Based on Hybrid Modeling
inferred← citeshttps://doi.org/10.4018/ijmmme.2018100101openalex-snapshot
Hybrid Modelling and Optimization of the Oblique Cutting of AISI 1045 Steel
inferred← citeshttps://doi.org/10.46338/ijetae1222_06openalex-snapshot
Cutting Forces and Temperature Optimization in Turning using a Predictive Machining Theory, ANN, and MOGA
inferred← citeshttps://doi.org/10.5821/dissertation-2117-113287openalex-snapshot
Electroplastic cutting influence in machining processes
inferred← citeshttps://doi.org/10.70675/28bdcd99z4ba4z4cf3za8e7z9b6f9330fd0aopenalex-snapshot
Contributions à la modélisation et la simulation de la coupe des métaux : vers un outil d'aide à la surveillance par apprentissage
inferred← citeshttps://doi.org/10.70675/c6ada302zba09z49f0zb991z8f5fc055662fopenalex-snapshot
Etude de l'influence de la structure métallurgique sur l'usinabilité des aciers à hautes caractéristiques mécaniques
Editorial review for independent work. ICSAC — the Institute for Complexity
Science and Advanced Computing — runs a structured editorial panel for researchers
publishing outside journals, and publishes on CiteStamp rails. Submission is free
and goes through ORCID: icsacinstitute.org/submit.