On the public citation graph
Effect of cryogenic compressed air on the evolution of cutting force and tool wear during machining of Ti–6Al–4V alloy
0 signed · 126 inferred · view as graph
Inferred edges come from two machine sources: sweeps of open repository metadata (mostly SSRN and Zenodo), and a bulk OpenAlex citation snapshot. Every row below is labelled with the one it came from. Neither is a complete citation index — absence here is not evidence of absence.
Is this your work? Sign in with ORCID and put your name on the
claims that are yours.
Reference health. See whether every reference in this work resolves to a
known work and none has been retracted — and get a dated CiteStamped
badge you can embed.
What this work says
Outgoing claims: the papers this work cites, builds on, or argues with.
inferredcites →https://doi.org/10.1007/s00170-014-5683-0openalex-snapshot
Evaluation of machining performance in cryogenic machining of Inconel 718 and comparison with dry and MQL machining
inferredcites →https://doi.org/10.1016/0043-1648(83)90011-xopenalex-snapshot
Evaluation of carbide grades and a new cutting geometry for machining titanium alloys
inferredcites →https://doi.org/10.1016/0043-1648(94)06572-1openalex-snapshot
An investigation of the effects of chip flow on tool-wear in machining with complex grooved tools
inferredcites →https://doi.org/10.1016/j.ijmachtools.2003.11.006openalex-snapshot
The assessment of cutting tool wear
inferredcites →https://doi.org/10.1016/j.ijmachtools.2008.08.008openalex-snapshot
Some studies on high-pressure cooling in turning of Ti–6Al–4V
inferredcites →https://doi.org/10.1016/j.ijmachtools.2010.04.008openalex-snapshot
Thermally enhanced machining of hard-to-machine materials—A review
inferredcites →https://doi.org/10.1016/j.ijmachtools.2010.08.003openalex-snapshot
Machining Ti–6Al–4V alloy with cryogenic compressed air cooling
inferredcites →https://doi.org/10.1016/j.ijmachtools.2011.02.009openalex-snapshot
New observations on tool life, cutting forces and chip morphology in cryogenic machining Ti-6Al-4V
inferredcites →https://doi.org/10.1016/j.ijrmhm.2005.04.010openalex-snapshot
Effect of TaC on plastic deformation of WC–Co and Ti(C,N)–WC–Co
inferredcites →https://doi.org/10.1016/j.jmatprotec.2007.04.095openalex-snapshot
Effectiveness of uncoated WC–Co and PCD inserts in end milling of titanium alloy—Ti–6Al–4V
inferredcites →https://doi.org/10.1016/j.jmatprotec.2011.01.022openalex-snapshot
Machining of β-titanium-alloy Ti–10V–2Fe–3Al under cryogenic conditions: Cooling with carbon dioxide snow
inferredcites →https://doi.org/10.1016/j.jmatprotec.2011.10.027openalex-snapshot
A comparison of cryogenic and high pressure emulsion cooling technologies on tool life and chip morphology in Ti–6Al–4V cutting
inferredcites →https://doi.org/10.1016/j.wear.2006.01.013openalex-snapshot
An experimental investigation of effects of cooling/lubrication conditions on tool wear in high-speed end milling of Ti-6Al-4V
inferredcites →https://doi.org/10.1016/j.wear.2013.05.011openalex-snapshot
Tool-wear analysis in cryogenic machining of NiTi shape memory alloys: A comparison of tool-wear performance with dry and MQL machining
inferredcites →https://doi.org/10.1016/s0007-8506(07)62273-2openalex-snapshot
A New Parametric Approach for the Assessment of Comprehensive Tool Wear in Coated Grooved Tools
inferredcites →https://doi.org/10.1016/s0007-8506(07)63272-7openalex-snapshot
Tool Wear in Titanium Machining
inferredcites →https://doi.org/10.1016/s0043-1648(96)07255-9openalex-snapshot
Temperature and wear of cutting tools in high-speed machining of Inconel 718 and Ti6Al6V2Sn
inferredcites →https://doi.org/10.1016/s0167-8922(06)x8001-xopenalex-snapshot
Tribology of Metal Cutting
inferredcites →https://doi.org/10.1016/s0890-6955(01)00026-8openalex-snapshot
Cooling approaches and cutting temperatures in cryogenic machining of Ti-6Al-4V
inferredcites →https://doi.org/10.1016/s0890-6955(01)00029-3openalex-snapshot
Friction and cutting forces in cryogenic machining of Ti–6Al–4V
inferredcites →https://doi.org/10.1016/s0890-6955(01)00041-4openalex-snapshot
New cooling approach and tool life improvement in cryogenic machining of titanium alloy Ti-6Al-4V
inferredcites →https://doi.org/10.1016/s0924-0136(01)00926-8openalex-snapshot
Tool life and surface integrity in turning titanium alloy
inferredcites →https://doi.org/10.1016/s0924-0136(96)00030-1openalex-snapshot
Titanium alloys and their machinability—a review
inferredcites →https://doi.org/10.1016/s0924-0136(99)00372-6openalex-snapshot
Advanced cutting conditions for the milling of aeronautical alloys
inferredcites →https://doi.org/10.1016/s0924-0136(99)00438-0openalex-snapshot
Evaluation of wear mechanisms of coated carbide tools when face milling titanium alloy
inferredcites →https://doi.org/10.1115/1.1839192openalex-snapshot
A Cobalt Diffusion Based Model for Predicting Crater Wear of Carbide Tools in Machining Titanium Alloys
inferredcites →https://doi.org/10.1115/1.2901677openalex-snapshot
Tribological Aspects of Metal Cutting
inferredcites →https://doi.org/10.1177/0954405413500243openalex-snapshot
Evolution of tool wear and its effect on cutting forces during dry machining of Ti-6Al-4V alloy
inferredcites →https://doi.org/10.1179/026708386790123611openalex-snapshot
Evaluation of principal wear mechanisms of cemented carbides and ceramics used for machining titanium alloy IMI 318
inferredcites →https://doi.org/10.1179/026708388790221827openalex-snapshot
Diffusion wear in milling titanium alloys
What points at this work
Incoming claims: where this work appears in other papers’ reference lists and arguments.
inferred← citeshttps://doi.org/10.2139/ssrn.4601646openalex-extracted
Machinability and Tool Wear Studies on Az91/B4c Metal Matrix Composites Using Uncoated and Cvd Diamond Coated Wc-Co Turning Inserts
inferred← citeshttps://doi.org/10.1002/mawe.201600758openalex-snapshot
Impact of work hardening, tool wear and geometry response on machinability during turning AL‐6XN super austenitic stainless steel: A work hardening and wear studies on AL‐6XN alloy
inferred← citeshttps://doi.org/10.1007/978-3-032-03550-9_34openalex-snapshot
A Dynamic Milling Power Model Considering Tool Wear and Material Hardness with Simulated Applications
inferred← citeshttps://doi.org/10.1007/s00170-016-9373-yopenalex-snapshot
Effects of internal cooling by cryogenic on the machinability of hardened steel
inferred← citeshttps://doi.org/10.1007/s00170-016-9467-6openalex-snapshot
Modeling of chip–tool interface temperature using response surface methodology and artificial neural network in HPC-assisted turning and tool life investigation
inferred← citeshttps://doi.org/10.1007/s00170-016-9883-7openalex-snapshot
Application of cutting fluids in machining of titanium alloys—a review
inferred← citeshttps://doi.org/10.1007/s00170-017-0566-9openalex-snapshot
Study of surface roughness and cutting forces using ANN, RSM, and ANOVA in turning of Ti-6Al-4V under cryogenic jets applied at flank and rake faces of coated WC tool
inferred← citeshttps://doi.org/10.1007/s00170-017-1444-1openalex-snapshot
Effect of cryogenic treatment on the microstructure and the wear behavior of WC-Co end mills for machining of Ti6Al4V titanium alloy
inferred← citeshttps://doi.org/10.1007/s00170-018-1973-2openalex-snapshot
Machining of biocompatible materials: a review
inferred← citeshttps://doi.org/10.1007/s00170-018-2213-5openalex-snapshot
Effect of cryogenic high-speed milling of compacted graphite iron using indirect spray system
inferred← citeshttps://doi.org/10.1007/s00170-018-2313-2openalex-snapshot
Wear mechanism of the loose layer on the rake face of a new cemented carbide micro groove turning tool
inferred← citeshttps://doi.org/10.1007/s00170-018-2660-zopenalex-snapshot
Predictive modeling for the cryogenic cooling condition of the hard turning process
inferred← citeshttps://doi.org/10.1007/s00170-019-03291-3openalex-snapshot
High speed machining of near-beta titanium Ti-5553 alloy under various cooling and lubrication conditions
inferred← citeshttps://doi.org/10.1007/s00170-019-04520-5openalex-snapshot
Assessment of tool wear and microstructural alteration of the cutting tools in conventional and sustainable slot milling of Ti-6Al-4V alloy
inferred← citeshttps://doi.org/10.1007/s00170-019-04721-yopenalex-snapshot
Effect of liquid nitrogen cooling on surface integrity in cryogenic milling of Ti-6Al-4 V titanium alloy
inferred← citeshttps://doi.org/10.1007/s00170-020-05043-0openalex-snapshot
Feasibility study of oil-on-water cooling in high-speed end milling of hardened steel
inferred← citeshttps://doi.org/10.1007/s00170-022-08770-8openalex-snapshot
A comprehensive review on metallic implant biomaterials and their subtractive manufacturing
inferred← citeshttps://doi.org/10.1007/s00170-023-11702-9openalex-snapshot
The design and application of variable distribution density micro-textured tool
inferred← citeshttps://doi.org/10.1007/s11465-023-0752-4openalex-snapshot
Equipment-process-strategy integration for sustainable machining: a review
inferred← citeshttps://doi.org/10.1007/s11665-018-3598-xopenalex-snapshot
Surface Integrity Analysis of Ti6Al4V After Semi-finishing Turning Under Different Low-Temperature Cooling Strategies
inferred← citeshttps://doi.org/10.1007/s11665-022-07512-xopenalex-snapshot
Cryogenic and Dry Machining of Ti6Al4V Alloy for Evaluation of Microhardness, Thermal Loads, Microstructure, and Surface Quality
inferred← citeshttps://doi.org/10.1007/s11665-024-09680-4openalex-snapshot
Effect of Cryogenic Cooling on Micro-milling Properties of Titanium Alloy
inferred← citeshttps://doi.org/10.1007/s11740-015-0650-7openalex-snapshot
Influence of the residual stress state of coatings on the wear behavior in external turning of AISI 4140 and Ti–6Al–4V
inferred← citeshttps://doi.org/10.1007/s11740-022-01143-wopenalex-snapshot
Influence of XHV-adequate atmosphere on surface integrity
inferred← citeshttps://doi.org/10.1007/s12540-020-00869-5openalex-snapshot
Evolution of Mechanical Properties of Ti–6Al–4V Alloy in the Temperature Range of 20 to − 196 °C
inferred← citeshttps://doi.org/10.1007/s40430-019-1612-3openalex-snapshot
Experimental investigation of tool wear in cryogenically treated insert during end milling of hard Ti alloy
inferred← citeshttps://doi.org/10.1007/s40684-020-00249-9openalex-snapshot
High-Speed Milling of Hardened Mold Steel P20 with Minimum Quantity Lubrication
inferred← citeshttps://doi.org/10.1007/s40684-023-00558-9openalex-snapshot
Influence of Various Cooling and Lubrication Conditions on Tool Wear and Machining Quality in Milling Inconel 718
inferred← citeshttps://doi.org/10.1016/b978-0-12-409548-9.10216-7openalex-snapshot
Overview of the Machining of Titanium Alloys
inferred← citeshttps://doi.org/10.1016/j.apm.2018.08.011openalex-snapshot
Numerical investigation of thermal characteristics of spray cooling with minimum quantity lubrication in milling process
inferred← citeshttps://doi.org/10.1016/j.ceramint.2020.06.238openalex-snapshot
Multi-pattern failure modes and wear mechanisms of WC-Co tools in dry turning Ti–6Al–4V
inferred← citeshttps://doi.org/10.1016/j.ceramint.2020.09.009openalex-snapshot
Wet abrasive wear behavior of WC-based cermet coatings prepared by HVOF spraying
inferred← citeshttps://doi.org/10.1016/j.cirpj.2021.08.005openalex-snapshot
A state-of-the-art review on tool wear and surface integrity characteristics in machining of superalloys
inferred← citeshttps://doi.org/10.1016/j.ijmecsci.2022.107686openalex-snapshot
Effects of machining parameters on surface morphology of porous bronze during monocrystalline diamond cutting
inferred← citeshttps://doi.org/10.1016/j.ijrmhm.2019.105091openalex-snapshot
Experimental investigation on tool wear characteristics of PVD and CVD coatings during face milling of Ti 6242S and Ti-555 titanium alloys
inferred← citeshttps://doi.org/10.1016/j.ijrmhm.2023.106538openalex-snapshot
Machinability and tool wear studies on AZ91/B4C metal matrix composites using uncoated and CVD diamond coated WC-Co turning inserts
inferred← citeshttps://doi.org/10.1016/j.jclepro.2019.06.148openalex-snapshot
A mechanics based prediction model for tool wear and power consumption in drilling operations and its applications
inferred← citeshttps://doi.org/10.1016/j.jclepro.2019.118526openalex-snapshot
Effects of eco-friendly cooling strategy on machining performance in micro-scale diamond turning of Ti–6Al–4V
inferred← citeshttps://doi.org/10.1016/j.jmapro.2019.02.005openalex-snapshot
Microstructural effects of Ti6Al4V alloys modified by electropulsing treatment on ultraprecision diamond turning
inferred← citeshttps://doi.org/10.1016/j.jmapro.2020.10.053openalex-snapshot
Influences of machining parameters on tool performance when high-speed ultrasonic vibration cutting titanium alloys
inferred← citeshttps://doi.org/10.1016/j.jmapro.2022.01.007openalex-snapshot
Machinability of additively manufactured titanium alloys: A comprehensive review
inferred← citeshttps://doi.org/10.1016/j.jmapro.2023.04.013openalex-snapshot
High-speed milling of hardened steel under minimal quantity lubrication with liquid nitrogen
inferred← citeshttps://doi.org/10.1016/j.jmapro.2023.09.075openalex-snapshot
Cutting fluids in metal AM: A review of sustainability and efficiency
inferred← citeshttps://doi.org/10.1016/j.jmatprotec.2015.10.002openalex-snapshot
Cryogenic machining of porous tungsten for enhanced surface integrity
inferred← citeshttps://doi.org/10.1016/j.jmatprotec.2024.118618openalex-snapshot
Improving wear resistance and machining performance of diamond tools in ferrous metals cutting: A review
inferred← citeshttps://doi.org/10.1016/j.jmatprotec.2025.118794openalex-snapshot
Observation and quantitative characterization of geometric and cyclical features associated with chip segmentation during machining of Ti6Al4V alloy
inferred← citeshttps://doi.org/10.1016/j.jmrt.2024.05.202openalex-snapshot
Effects of machining parameters, ultrasonic vibrations and cooling conditions on cutting forces and tool wear in meso scale ultrasonic vibrations assisted end-milling (UVAEM) of Ti–6Al–4V under dry, flooded, MQL and cryogenic environments – A statistical analysis
inferred← citeshttps://doi.org/10.1016/j.matpr.2020.12.498openalex-snapshot
Impact of environmental friendly machining on machinability: A review
inferred← citeshttps://doi.org/10.1016/j.matpr.2021.03.652openalex-snapshot
Role of environmental friendly machining on machinability
inferred← citeshttps://doi.org/10.1016/j.matpr.2022.04.047openalex-snapshot
Cryogenic turning of titanium alloys: Machinability characteristics and environmental consequences
inferred← citeshttps://doi.org/10.1016/j.measurement.2017.07.033openalex-snapshot
Multi-response optimization of end milling parameters under through-tool cryogenic cooling condition
inferred← citeshttps://doi.org/10.1016/j.mtcomm.2024.109049openalex-snapshot
Influence of clean cooling medium on the hard drilling performance and machined surface integrity of 42CrMo steel
inferred← citeshttps://doi.org/10.1016/j.precisioneng.2024.06.018openalex-snapshot
Study on the effects of the machining process on porous bronze morphology via fractal dimension and pore parameters
inferred← citeshttps://doi.org/10.1016/j.procir.2016.01.147openalex-snapshot
Experimental Investigation of Supercritical Carbon Dioxide (SCCO2) Performance as a Sustainable Cooling Technique
inferred← citeshttps://doi.org/10.1016/j.procir.2017.11.070openalex-snapshot
Characterization of Machinability and Environmental Impact of Cryogenic Turning of Ti-6Al-4V
inferred← citeshttps://doi.org/10.1016/j.procir.2018.08.301openalex-snapshot
Performance of supercritical carbon dioxide (scCO2) mixed with oil-on-water (OoW) cooling in high-speed milling of 316L stainless steel
inferred← citeshttps://doi.org/10.1016/j.procir.2024.02.012openalex-snapshot
On the performance of cryogenic technology in milling of hardened H13 tool steel.
inferred← citeshttps://doi.org/10.1016/j.susmat.2024.e00946openalex-snapshot
A review of the use of cryogenic coolant during machining titanium alloys
inferred← citeshttps://doi.org/10.1016/j.triboint.2016.09.034openalex-snapshot
On the tool wear mechanisms in dry and cryogenic turning Additive Manufactured titanium alloys
inferred← citeshttps://doi.org/10.1016/j.wear.2025.205855openalex-snapshot
On the tribological and thermal aspects of cryogenic machining of Inconel 718 and their effects on surface integrity
inferred← citeshttps://doi.org/10.1051/matecconf/201817803014openalex-snapshot
Considerations regarding the use of cryogenic cooling in metal cutting as an alternative to conventional cooling – brief review
inferred← citeshttps://doi.org/10.1063/1.5010492openalex-snapshot
Progressive tool flank wear and surface roughness when turning AISI 1017 mild steel using reduced thickness inserts in finishing cutting conditions
inferred← citeshttps://doi.org/10.1063/1.5112613openalex-snapshot
Non-liquid alternative coolants in robotic machining
inferred← citeshttps://doi.org/10.1080/02670844.2023.2212946openalex-snapshot
Turning of Al 7075-T6 aerospace alloy under different sustainable metalworking fluid strategies by coated carbide tools
inferred← citeshttps://doi.org/10.1080/10426914.2016.1269920openalex-snapshot
Influence of cryogenic coolant on turning performance characteristics: A comparison with wet machining
inferred← citeshttps://doi.org/10.1080/10910344.2020.1815039openalex-snapshot
Identifying the effectiveness of manner of cryogenic coolant supply in different cryogenic cooling techniques in turning process—a review
inferred← citeshttps://doi.org/10.1080/10910344.2023.2180749openalex-snapshot
A review on performance evaluation of liquid nitrogen as coolant in turning Ti-6Al-4V alloy
inferred← citeshttps://doi.org/10.1080/17480272.2024.2407390openalex-snapshot
Influence of cryogenic CO2 on wood-plastic composite (WPC) turning-performance characteristics: a comparison with dry machining
inferred← citeshttps://doi.org/10.1080/2374068x.2024.2423492openalex-snapshot
Current research trends in coolant application for machining Ti-6Al-4V alloy: a state-of-the-art review
inferred← citeshttps://doi.org/10.1088/1361-6463/aab1a8openalex-snapshot
Simulation investigation of thermal phase transformation and residual stress in single pulse EDM of Ti–6Al–4V
inferred← citeshttps://doi.org/10.1088/1757-899x/455/1/012101openalex-snapshot
A Brief Review on Machining of Ti-6Al-4V under Different Cooling Environments
inferred← citeshttps://doi.org/10.1088/1757-899x/689/1/012006openalex-snapshot
Wear and surface roughness analysis of machining of Ti-6Al-4V under dry, wet and cryogenic conditions
inferred← citeshttps://doi.org/10.1088/1757-899x/998/1/012013openalex-snapshot
A Critical Review on Machining Of Titanium and Its Alloy under Cryogenic Cooling Environment
inferred← citeshttps://doi.org/10.1109/icmimt59138.2023.10200627openalex-snapshot
Investigation of Surface Roughness of Titanium Alloy (Ti6Al4V) during Turning Operation Using the Response Surface Methodology
inferred← citeshttps://doi.org/10.1155/2016/7213148openalex-snapshot
Impacts of Wear and Geometry Response of the Cutting Tool on Machinability of Super Austenitic Stainless Steel
inferred← citeshttps://doi.org/10.1177/0954405415599956openalex-snapshot
Effect of tool wear on chip formation during dry machining of Ti-6Al-4V alloy, part 1: Effect of gradual tool wear evolution
inferred← citeshttps://doi.org/10.1177/0954405415600011openalex-snapshot
Effect of tool wear on chip formation during dry machining of Ti-6Al-4V alloy, part 2: Effect of tool failure modes
inferred← citeshttps://doi.org/10.1177/0954405416666905openalex-snapshot
The effect of monolayer TiCN-, AlTiN-, TiAlN-and two layers TiCN + TiN- and AlTiN + TiN-coated cutting tools on tool wear, cutting force, surface roughness and chip morphology during high-speed milling of Ti6Al4V titanium alloy
inferred← citeshttps://doi.org/10.1177/0954405417737581openalex-snapshot
Influence of single and dual cryogenic jets on machinability characteristics in turning of Ti-6Al-4V
inferred← citeshttps://doi.org/10.1177/09544062261429323openalex-snapshot
Experimental investigation and multi-criteria optimization of rough and finish milling for AISI 316L stainless steel: A focus on surface integrity, temperature, and tool performance
inferred← citeshttps://doi.org/10.14393/ufu.di.2021.5592openalex-snapshot
Análise da força de corte e rugosidade no torneamento de ferro fundido cinzento utilizando sistemres
inferred← citeshttps://doi.org/10.1557/jmr.2016.21openalex-snapshot
Study on wear mechanism of solid carbide cutting tool in milling CFRP
inferred← citeshttps://doi.org/10.2339/politeknik.1432815openalex-snapshot
Investigatıon of the Effect of Built-Up Edge on Chip Morphology at the Cutting Edge During Turning Operation
inferred← citeshttps://doi.org/10.3139/104.111554openalex-snapshot
Kryogener Kühlschmierstoff auf der Basis von Ethylenglykol
inferred← citeshttps://doi.org/10.3390/app132111743openalex-snapshot
Tribological Analysis of Several Coatings under Flood and Cryogenic Cooling Conditions
inferred← citeshttps://doi.org/10.3390/lubricants12120444openalex-snapshot
Response Modeling and Optimization of Process Parameters in Turning Medium Carbon Steel Under Minimum Quantity Lubrication (MQL) with Vegetable Oil and Oil Blends
inferred← citeshttps://doi.org/10.3390/ma13020393openalex-snapshot
Repairing Hybrid Mg–Al–Mg Components Using Sustainable Cooling Systems
inferred← citeshttps://doi.org/10.3390/machines13090844openalex-snapshot
A Critical Review of Ultrasonic-Assisted Machining of Titanium Alloys
inferred← citeshttps://doi.org/10.3390/met8100850openalex-snapshot
Machining Performance of TiAlN-Coated Cemented Carbide Tools with Chip Groove in Machining Titanium Alloy Ti-6Al-0.6Cr-0.4Fe-0.4Si-0.01B
inferred← citeshttps://doi.org/10.4018/979-8-3693-3378-5.ch001openalex-snapshot
Development and Applications of an Environmentally Friendly Techniques Using Cryogenic Minimum Quantity Lubrication
inferred← citeshttps://doi.org/10.4018/979-8-3693-3378-5.ch002openalex-snapshot
Action Mechanism and Application Performance of Cryogenic Minimum Quantity Lubrication Technology
inferred← citeshttps://doi.org/10.4028/p-g5164dopenalex-snapshot
Impact of Single and Duplex Cryogenic Jets on Mechanical and Physical Characteristics in Turning of Titanium Superalloys
inferred← citeshttps://doi.org/10.4150/kpmi.2015.22.3.163openalex-snapshot
Characteristics of Material Properties and Machining Surface in Electrical Discharge Machining of Ti2AlN and Ti2AlC Materials
inferred← citeshttps://doi.org/10.7736/kspe.2018.35.3.253openalex-snapshot
Mechanical Cutting Process Trends for Difficult-to-Cut Materials : A Review
Editorial review for independent work. ICSAC — the Institute for Complexity
Science and Advanced Computing — runs a structured editorial panel for researchers
publishing outside journals, and publishes on CiteStamp rails. Submission is free
and goes through ORCID: icsacinstitute.org/submit.