On the public citation graph

Plastic instability criterion based on new necking parameters for Cu–Al, Cu–A5052, and Cu–A5083 roll-bonded laminated metal composites fabricated without post-annealing

https://doi.org/10.1016/j.jmatprotec.2022.117634
0 signed · 69 inferred · view as graph

Inferred edges come from two machine sources: sweeps of open repository metadata (mostly SSRN and Zenodo), and a bulk OpenAlex citation snapshot. Every row below is labelled with the one it came from. Neither is a complete citation index — absence here is not evidence of absence.

Is this your work? Sign in with ORCID and put your name on the claims that are yours.
Claim with ORCID
Reference health. See whether every reference in this work resolves to a known work and none has been retracted — and get a dated CiteStamped badge you can embed.
See reference health

What this work says

Outgoing claims: the papers this work cites, builds on, or argues with.

inferredcites →https://doi.org/10.1002/adem.201900673openalex-snapshot
Processing of Dilute Mg–Zn–Mn–Ca Alloy/Nb Multilayers by Accumulative Roll Bonding
inferredcites →https://doi.org/10.1007/s11661-013-2162-4openalex-snapshot
Processing Parameter Influence on Texture and Microstructural Evolution in Cu-Nb Multilayer Composites Fabricated via Accumulative Roll Bonding
inferredcites →https://doi.org/10.1007/s11661-014-2534-4openalex-snapshot
Analysis of Strain Rate Sensitivity of Ultrafine-Grained AA1050 by Stress Relaxation Test
inferredcites →https://doi.org/10.1007/s12613-017-1519-xopenalex-snapshot
Effects of heat treatment on the intermetallic compounds and mechanical properties of the stainless steel 321–aluminum 1230 explosive-welding interface
inferredcites →https://doi.org/10.1016/0001-6160(78)90023-8openalex-snapshot
Kinking as a mode of structural degradation in carbon fiber composites
inferredcites →https://doi.org/10.1016/0022-5096(52)90002-1openalex-snapshot
Plastic instability under plane stress
inferredcites →https://doi.org/10.1016/b978-0-12-341801-2.50007-2openalex-snapshot
Fracture of Composites
inferredcites →https://doi.org/10.1016/j.actamat.2006.12.027openalex-snapshot
Bulk mechanical alloying of Cu–Ag and Cu/Zr two-phase microstructures by accumulative roll-bonding process
inferredcites →https://doi.org/10.1016/j.actamat.2011.11.045openalex-snapshot
Bulk texture evolution of Cu–Nb nanolamellar composites during accumulative roll bonding
inferredcites →https://doi.org/10.1016/j.actamat.2016.02.037openalex-snapshot
Plastic deformation behavior of 10H-type synchronized LPSO phase in a Mg–Zn–Y system
inferredcites →https://doi.org/10.1016/j.actamat.2016.03.034openalex-snapshot
High strength and thermal stability of bulk Cu/Ta nanolamellar multilayers fabricated by cross accumulative roll bonding
inferredcites →https://doi.org/10.1016/j.actamat.2017.04.050openalex-snapshot
Strain fields induced by kink band propagation in Cu-Nb nanolaminate composites
inferredcites →https://doi.org/10.1016/j.cirp.2015.04.131openalex-snapshot
Joining sheet metals by electrically-assisted roll bonding
inferredcites →https://doi.org/10.1016/j.dt.2019.10.002openalex-snapshot
High strain rate deformation of explosion-welded Ti6Al4V/pure titanium
inferredcites →https://doi.org/10.1016/j.intermet.2009.07.014openalex-snapshot
Plastic deformation behavior of Mg12YZn with 18R long-period stacking ordered structure
inferredcites →https://doi.org/10.1016/j.jallcom.2019.152956openalex-snapshot
Microstructural evolution and mechanical properties of nanostructured Cu/Ni multilayer fabricated by accumulative roll bonding
inferredcites →https://doi.org/10.1016/j.jmapro.2018.09.014openalex-snapshot
Multilayer Cu/Al/Cu explosive welded joints: Characterizing heat treatment effect on the interface microstructure and mechanical properties
inferredcites →https://doi.org/10.1016/j.jmrt.2019.07.039openalex-snapshot
Influence of ARB technique on the microstructural, mechanical and fracture properties of the multilayered Al1050/Al5052 composite reinforced by SiC particles
inferredcites →https://doi.org/10.1016/j.matdes.2013.11.067openalex-snapshot
Fabrication of nanostructured Al/Cu/Mn metallic multilayer composites by accumulative roll bonding process and investigation of their mechanical properties
inferredcites →https://doi.org/10.1016/j.matdes.2021.110204openalex-snapshot
Evolution of microstructures and properties leading to layer instabilities during accumulative roll bonding of Fe Cu, Fe Ag, and Fe Al
inferredcites →https://doi.org/10.1016/j.matlet.2006.03.001openalex-snapshot
Evolution of microstructure for multilayered Al/Ni composites by accumulative roll bonding process
inferredcites →https://doi.org/10.1016/j.mechmat.2009.11.015openalex-snapshot
Predictions of compressive strength and kink band orientation for wood species
inferredcites →https://doi.org/10.1016/j.mechmat.2018.04.002openalex-snapshot
Mechanistic insight into the role of severe plastic deformation and post-deformation annealing in fracture behavior of Al-Mn-Si alloy
inferredcites →https://doi.org/10.1016/j.msea.2004.08.029openalex-snapshot
Strain rate sensitivity of the commercial aluminum alloy AA5182-O
inferredcites →https://doi.org/10.1016/j.msea.2016.02.070openalex-snapshot
Production of Al/Sn multilayer composite by accumulative roll bonding (ARB): A study of microstructure and mechanical properties
inferredcites →https://doi.org/10.1016/j.msea.2019.138163openalex-snapshot
Strengthening of Mg-based long-period stacking ordered (LPSO) phase with deformation kink bands
inferredcites →https://doi.org/10.1016/j.msea.2019.138802openalex-snapshot
Effect of interfacial intermetallic compounds evolution on the mechanical response and fracture of layered Ti/Cu/Ti clad materials
inferredcites →https://doi.org/10.1016/s0007-8506(07)61760-0openalex-snapshot
Bond Strength in Cold Roll Bonding
inferredcites →https://doi.org/10.1016/s0020-7683(97)00138-8openalex-snapshot
Kink band propagation and broadening in ductile matrix fiber composites: Experiments and analysis
inferredcites →https://doi.org/10.1016/s0921-5093(01)01161-3openalex-snapshot
Application of deformation instability to microstructural control in multilayer ceramic composites
inferredcites →https://doi.org/10.1016/s1359-6454(98)00365-6openalex-snapshot
Novel ultra-high straining process for bulk materials—development of the accumulative roll-bonding (ARB) process
inferredcites →https://doi.org/10.1016/s1359-6454(99)00443-7openalex-snapshot
Quasi-static and dynamic mechanical response of Haliotis rufescens (abalone) shells
inferredcites →https://doi.org/10.1016/s1359-6462(98)00302-9openalex-snapshot
Ultra-fine grained bulk aluminum produced by accumulative roll-bonding (ARB) process
inferredcites →https://doi.org/10.1038/nmat814openalex-snapshot
Fully reversible, dislocation-based compressive deformation of Ti3SiC2 to 1 GPa
inferredcites →https://doi.org/10.1063/1.4918922openalex-snapshot
Intermixing in Cu/Ni multilayers induced by cold rolling
inferredcites →https://doi.org/10.1080/095008397179787openalex-snapshot
Kinks and cracks in S1 ice under across-column compression
inferredcites →https://doi.org/10.1080/14786435.2010.510453openalex-snapshot
Change in electrical resistivity of commercial purity aluminium severely plastic deformed
inferredcites →https://doi.org/10.1088/1361-6528/ab803fopenalex-snapshot
Nanomaterials by design: a review of nanoscale metallic multilayers
inferredcites →https://doi.org/10.1155/2014/614821openalex-snapshot
Effects of Rolling Reduction and Strength of Composed Layers on Bond Strength of Pure Copper and Aluminium Alloy Clad Sheets Fabricated by Cold Roll Bonding
inferredcites →https://doi.org/10.2320/materia1962.26.1028openalex-snapshot
Plastic instability of sandwich sheet materials in rolling.
inferredcites →https://doi.org/10.2320/matertrans.44.1376openalex-snapshot
Ultra Grain Refinement of Commercial Purity Aluminum by a Multi-Stack ARB Process
inferredcites →https://doi.org/10.2320/matertrans.47.959openalex-snapshot
Microstructure and Mechanical Properties of Extruded Mg-Zn-Y Alloys with 14H Long Period Ordered Structure
inferredcites →https://doi.org/10.2320/matertrans.m2016307openalex-snapshot
Microstructure and Mechanical Properties of Multilayered Cu/Ti Composites Fabricated by Accumulative Roll Bonding
inferredcites →https://doi.org/10.2320/matertrans.md200809openalex-snapshot
Temperature and Strain Rate Dependence of Flow Stress in Severely Deformed Copper by Accumulative Roll Bonding
inferredcites →https://doi.org/10.2320/matertrans.mh201506openalex-snapshot
Effect of Roll-Bonding and Subsequent Annealing on Microstructure Evolution of Accumulative Roll Bonded Pure Copper
inferredcites →https://doi.org/10.2320/matertrans.mh201519openalex-snapshot
Microstructure and Mechanical Properties of ARB Processed Aluminium with Different Purities
inferredcites →https://doi.org/10.3390/app9173627openalex-snapshot
Accumulative Roll Bonding—A Review
inferredcites →https://doi.org/10.3390/met10030354openalex-snapshot
Microstructure and Mechanical Properties of the Ni/Ti/Nb Multilayer Composite Manufactured by Accumulative Pack-Roll Bonding

What points at this work

Incoming claims: where this work appears in other papers’ reference lists and arguments.

inferred← citeshttps://doi.org/10.2139/ssrn.4571270openalex-extracted
Synergistic Deformation and Fracture Behavior of Heterostructure Cu/1010 Steel Bimetal Laminated Composites
inferred← citeshttps://doi.org/10.1007/s11837-024-07125-wopenalex-snapshot
Effect of Rolling Speed, Friction, and Strain on Microstructure, Grain Structure, and Mechanical Properties of Al/Mg/Al Laminated Composite
inferred← citeshttps://doi.org/10.1007/s42114-025-01547-zopenalex-snapshot
Unveiling the mechanism for enhanced mechanical–electrical–tribological property integration in CuCrZr/Cu laminated metallic composites via cryorolling and short-term annealing
inferred← citeshttps://doi.org/10.1016/j.jallcom.2024.177800openalex-snapshot
Effects of alloying elements on microstructure evolution, interfacial structure, and mechanical properties of Al/Cu laminate
inferred← citeshttps://doi.org/10.1016/j.jallcom.2025.179149openalex-snapshot
Interface-dominated microstructure development and mechanical and electrical properties of Al/Cu multilayered composites prepared via multicomponent accumulative roll bonding
inferred← citeshttps://doi.org/10.1016/j.jallcom.2025.181024openalex-snapshot
Tailoring heterogenous microstructure of Cu-Al alloy to optimize mechanical properties by rotary swaging and annealing
inferred← citeshttps://doi.org/10.1016/j.jmatprotec.2024.118349openalex-snapshot
Tailoring the microstructure of Al/Ti laminated composite through hot press sintering process to achieve superior mechanical properties
inferred← citeshttps://doi.org/10.1016/j.jmatprotec.2024.118489openalex-snapshot
Preparing bulk nanocrystalline Cu–Al alloys via rotary swaging
inferred← citeshttps://doi.org/10.1016/j.jmatprotec.2025.118920openalex-snapshot
Enhanced interfacial characteristics and mechanical properties of Ti/steel clad plates fabricated by explosion welding and hot rolling
inferred← citeshttps://doi.org/10.1016/j.jmrt.2026.07.059openalex-snapshot
Superior interfacial stability and strengthening in Cu/Al composites processed by integrated drawing-rolling versus conventional rolling
inferred← citeshttps://doi.org/10.1016/j.micron.2025.103976openalex-snapshot
In-depth analysis of grain structure of heavily-deformed multilayered composites by electron backscattered diffraction
inferred← citeshttps://doi.org/10.1016/j.msea.2023.145835openalex-snapshot
Synergistic deformation and fracture behavior of heterostructure Cu/1010 steel bimetal laminated composites
inferred← citeshttps://doi.org/10.1016/j.msea.2024.147286openalex-snapshot
Effect of intermetallic compounds on the mechanical properties of Cu/Al clad sheets with an SS304 interlayer
inferred← citeshttps://doi.org/10.1016/s1003-6326(25)67015-4openalex-snapshot
6061 Al/Cu layered composites with high strength and well interfacial bonding prepared by accumulative roll bonding
inferred← citeshttps://doi.org/10.1177/1478422x251340712openalex-snapshot
Effect of crystal structure of matrix layers on microstructure, texture and corrosion characteristics of multilayered composites
inferred← citeshttps://doi.org/10.2320/matertrans.mt-md2022003openalex-snapshot
Effects of a Preannealing Process on the Morphology of Developed Kinks in Mille-Feuille Structured Cu/A5052 Alloy Fabricated by Accumulative Roll Bonding: Criteria for Kink Formation
inferred← citeshttps://doi.org/10.3390/ma16072667openalex-snapshot
Theory, Method and Practice of Metal Deformation Instability: A Review
inferred← citeshttps://doi.org/10.3390/ma17030577openalex-snapshot
Microstructure and Mechanical Properties of AA1050/AA6061 Laminated Composites Fabricated through Three-Cycle Accumulative Roll Bonding and Subsequent Cryorolling
inferred← citeshttps://doi.org/10.3390/ma18030559openalex-snapshot
Interfacial Shear Fracture Behavior of C18150Cu/1060Al/C18150Cu Trilayered Composite at Different Temperatures
inferred← citeshttps://doi.org/10.3390/ma18040758openalex-snapshot
Deformation and Fracture Behaviour of Heterostructure Mn8/SS400 Bimetal Composite
inferred← citeshttps://doi.org/10.3390/met15060580openalex-snapshot
The Influence of Interface Morphology on the Mechanical Properties of Binary Laminated Metal Composites Fabricated by Hierarchical Roll-Bonding
Editorial review for independent work. ICSAC — the Institute for Complexity Science and Advanced Computing — runs a structured editorial panel for researchers publishing outside journals, and publishes on CiteStamp rails. Submission is free and goes through ORCID: icsacinstitute.org/submit.