On the public citation graph

Stability, deoxidation, and sintering characteristics of activated Mo–10%Nb solid-solution powders prepared by mechanical alloying

https://doi.org/10.1016/j.jmrt.2022.04.036
0 signed · 44 inferred · view as graph

Inferred edges come from two machine sources: sweeps of open repository metadata (mostly SSRN and Zenodo), and a bulk OpenAlex citation snapshot. Every row below is labelled with the one it came from. Neither is a complete citation index — absence here is not evidence of absence.

Is this your work? Sign in with ORCID and put your name on the claims that are yours.
Claim with ORCID
Reference health. See whether every reference in this work resolves to a known work and none has been retracted — and get a dated CiteStamped badge you can embed.
See reference health

What this work says

Outgoing claims: the papers this work cites, builds on, or argues with.

inferredcites →https://doi.org/10.1007/s11837-018-3062-2openalex-snapshot
A New Route to Produce Submicron Mo Powders via Carbothermal Pre-reduction Followed by Deep Magnesium Reduction
inferredcites →https://doi.org/10.1016/0167-2738(95)00247-2openalex-snapshot
Cooperative transport in oxides: Diffusion and migration processes involving Mo(VI), W(VI), V(V) and Nb(V)
inferredcites →https://doi.org/10.1016/j.apsusc.2018.06.012openalex-snapshot
Sputter deposition of Mo-based multicomponent thin films from rotatable targets: Experiment and simulation
inferredcites →https://doi.org/10.1016/j.apsusc.2020.146729openalex-snapshot
XPS spectral analysis for a multiple oxide comprising NiO, TiO2, and NiTiO3
inferredcites →https://doi.org/10.1016/j.apt.2019.12.038openalex-snapshot
Changes in the oxygen content, morphology, and microstructure of Mo-10Nb composite powders during mechanical alloying
inferredcites →https://doi.org/10.1016/j.calphad.2011.12.004openalex-snapshot
Diffusion characteristics and atomic mobilities for bcc refractory Mo–Ta, Mo–W, and Mo–Nb alloys
inferredcites →https://doi.org/10.1016/j.ijrmhm.2004.08.002openalex-snapshot
Studies on sacrificial and carbon deoxidation of niobium
inferredcites →https://doi.org/10.1016/j.ijrmhm.2006.11.002openalex-snapshot
Production of niobium powder by magnesiothermic reduction of niobium oxides in a cyclone reactor
inferredcites →https://doi.org/10.1016/j.ijrmhm.2014.06.001openalex-snapshot
A study on mechanochemical behavior of MoO3–Mg–C to synthesize molybdenum carbide
inferredcites →https://doi.org/10.1016/j.ijrmhm.2019.105039openalex-snapshot
An industrially feasible pathway for preparation of Mo nanopowder and its sintering behavior
inferredcites →https://doi.org/10.1016/j.ijrmhm.2019.105116openalex-snapshot
Microstructure and magnetron sputtering properties of tungsten target fabricated by low pressure plasma spraying
inferredcites →https://doi.org/10.1016/j.ijrmhm.2021.105770openalex-snapshot
Characterization of Mo-6Ta alloy targets and its magnetron sputtering deposited thin film
inferredcites →https://doi.org/10.1016/j.jallcom.2013.01.142openalex-snapshot
Spark plasma sintering of Mo–W powders prepared by mechanical alloying
inferredcites →https://doi.org/10.1016/j.jallcom.2016.10.052openalex-snapshot
Microstructural characterization and thermodynamic analysis of MoZn produced by mechanical alloying
inferredcites →https://doi.org/10.1016/j.jeurceramsoc.2020.08.046openalex-snapshot
Simulation of densification behavior of nano-powder in final sintering stage: Effect of pore-size distribution
inferredcites →https://doi.org/10.1016/j.jmatprotec.2020.116646openalex-snapshot
In situ synthesis of a binary Ti–10at% Nb alloy by electron beam melting using a mixture of elemental niobium and titanium powders
inferredcites →https://doi.org/10.1016/j.jmrt.2020.10.054openalex-snapshot
Fabrication of spherical Ti–6Al–4V powder for additive manufacturing by radio frequency plasma spheroidization and deoxidation using calcium
inferredcites →https://doi.org/10.1016/j.jmrt.2021.06.058openalex-snapshot
Methane aromatization study on M-Mo2C/HZSM-5 (M = Ce or Pd or Nb) nano materials
inferredcites →https://doi.org/10.1016/j.jmrt.2021.07.127openalex-snapshot
MoS2@Mo2C hybrid nanostructures formation as an efficient anode material for lithium-ion batteries
inferredcites →https://doi.org/10.1016/j.matchar.2013.01.001openalex-snapshot
Metallographic characterization of the molybdenum based alloy MHC by a color etching technique
inferredcites →https://doi.org/10.1016/j.matlet.2016.07.058openalex-snapshot
Effect of magnesium on the phase equilibria in magnesio-thermic reduction of Nb2O5
inferredcites →https://doi.org/10.1016/j.matpr.2020.03.569openalex-snapshot
Microstructural and mechanical properties of Ti-Mo-W alloy by mechanical alloying and conventional sintering
inferredcites →https://doi.org/10.1016/j.msea.2008.04.063openalex-snapshot
Effect of mechanical alloying on microstructure, mechanical properties and oxidation behavior of hot pressed nanocrystalline Cr–33 Nb alloys
inferredcites →https://doi.org/10.1016/j.mssp.2020.105342openalex-snapshot
Fabrication of high-density In2Ga2ZnO7 sputtering target with uniform microstructure
inferredcites →https://doi.org/10.1016/j.surfcoat.2019.125174openalex-snapshot
The sputter performance of an industrial-scale planar Mo-target over its lifetime: Target erosion and film properties
inferredcites →https://doi.org/10.1016/j.surfcoat.2020.126213openalex-snapshot
A novel surface design for preparing a Mo-10%Nb sputtering target with ultra-low oxygen content: Coating a NbC layer on Nb powder particles via chemical vapour reaction under CH4 atmosphere
inferredcites →https://doi.org/10.1016/s0010-938x(03)00139-2openalex-snapshot
Atmospheric oxidation of a Nb–Zr alloy studied with XPS
inferredcites →https://doi.org/10.1016/s0925-8388(97)00509-4openalex-snapshot
Solid state deoxidation of niobium by calcium and magnesium
inferredcites →https://doi.org/10.4028/www.scientific.net/kem.726.316openalex-snapshot
Comparison of Mo-10Nb Alloy Target Materials Prepared by Different Techniques

What points at this work

Incoming claims: where this work appears in other papers’ reference lists and arguments.

inferred← citeshttps://doi.org/10.2139/ssrn.4525374openalex-extracted
inferred← citeshttps://doi.org/10.2139/ssrn.4614764openalex-extracted
The Effect of Mo/Nb on the Microstructure and Mechanical Properties of the Deposited Metal of Nicrmo Alloy
inferred← citeshttps://doi.org/10.1016/j.actamat.2026.122512openalex-snapshot
Engineering diffusion pathways for simultaneous solid-solution formation and grain refinement in Mo-Nb alloys
inferred← citeshttps://doi.org/10.1016/j.ijrmhm.2024.106794openalex-snapshot
Low-oxygen, uniform, and dense Mo10Nb alloys obtained by combining in situ deoxygenation and mechanical alloying
inferred← citeshttps://doi.org/10.1016/j.jallcom.2026.189214openalex-snapshot
High performance of MoNbTi alloy barriers for copper metallization of semiconductor display
inferred← citeshttps://doi.org/10.1016/j.jmrt.2023.09.043openalex-snapshot
Efficient degradation capability of the FePCB amorphous alloy in acid orange 7 dye solution
inferred← citeshttps://doi.org/10.1016/j.jmrt.2024.03.055openalex-snapshot
Effect of Mo/Nb ratio variations on the microstructure and cryogenic impact toughness of NiCrMo deposited metals
inferred← citeshttps://doi.org/10.1016/j.jmrt.2025.04.190openalex-snapshot
Impact of mechanical pre-alloying on the densification and microstructure of Mo–10 %Nb sintered billets
inferred← citeshttps://doi.org/10.1016/j.matchar.2024.113849openalex-snapshot
Microstructural comparison of hot isostatically pressed Mo10Nb alloys before and after hot rolling
inferred← citeshttps://doi.org/10.1016/j.matchar.2024.113974openalex-snapshot
Effect of Nb content variations on the microstructure and mechanical properties of NiCrMo welded joints
inferred← citeshttps://doi.org/10.1088/1402-4896/ae32bdopenalex-snapshot
Tensile properties of Mo-3Nb alloy rod at different strain rates
inferred← citeshttps://doi.org/10.1149/1945-7111/ad9d7fopenalex-snapshot
Preparation of Niobium through Electrolysis of NbCxOy Soluble Anode
inferred← citeshttps://doi.org/10.1177/02670836241302687openalex-snapshot
Dense and uniform Mo10W alloy prepared by combining a vacuum sintering process with a hot-pressing process
inferred← citeshttps://doi.org/10.3390/ma17205008openalex-snapshot
Formation Mechanism and Prevention of Cu Undercut Defects in the Photoresist Stripping Process of MoNb/Cu Stacked Electrodes
inferred← citeshttps://doi.org/10.3390/met16080920openalex-snapshot
Low-Oxygen and Dense Mo10Cr Alloys Prepared via In-Situ Nanocarbon Deoxygenation and Two-Step Pressurization Hot Pressing
Editorial review for independent work. ICSAC — the Institute for Complexity Science and Advanced Computing — runs a structured editorial panel for researchers publishing outside journals, and publishes on CiteStamp rails. Submission is free and goes through ORCID: icsacinstitute.org/submit.