On the public citation graph
Mechanical properties and microstructure of joints in AZ31 thin sheets obtained by friction stir welding using “pin” and “pinless” tool configurations
0 signed · 96 inferred · view as graph
Inferred edges come from two machine sources: sweeps of open repository metadata (mostly SSRN and Zenodo), and a bulk OpenAlex citation snapshot. Every row below is labelled with the one it came from. Neither is a complete citation index — absence here is not evidence of absence.
Is this your work? Sign in with ORCID and put your name on the
claims that are yours.
Reference health. See whether every reference in this work resolves to a
known work and none has been retracted — and get a dated CiteStamped
badge you can embed.
What this work says
Outgoing claims: the papers this work cites, builds on, or argues with.
inferredcites →https://doi.org/10.1007/s12289-010-0940-8openalex-snapshot
Effect of the ω/v ratio and sheet thickness on mechanical properties of magnesium alloy FSWED joints
inferredcites →https://doi.org/10.1016/j.actamat.2008.09.011openalex-snapshot
Friction stir welding of AZ31 magnesium alloy rolled sheets: Influence of processing parameters
inferredcites →https://doi.org/10.1016/j.actamat.2009.11.048openalex-snapshot
Mechanical and metallurgical effects of in process cooling during friction stir welding of AA7075-T6 butt joints
inferredcites →https://doi.org/10.1016/j.cirp.2008.03.035openalex-snapshot
On the thermo-mechanical loads and the resultant residual stresses in friction stir processing operations
inferredcites →https://doi.org/10.1016/j.ijmachtools.2006.01.007openalex-snapshot
The influence of the ratio of “rotational speed/traverse speed” (ω/v) on mechanical properties of AZ31 friction stir welds
inferredcites →https://doi.org/10.1016/j.matdes.2008.09.016openalex-snapshot
Influence of friction stir welding parameters on the microstructural and mechanical properties of AA 6016-T4 thin welds
inferredcites →https://doi.org/10.1016/j.matdes.2011.01.004openalex-snapshot
Post-welding formability of AZ31 magnesium alloy
inferredcites →https://doi.org/10.1016/j.matlet.2006.03.123openalex-snapshot
Effect of welding parameters on microstructure in the stir zone of FSW joints of aluminum die casting alloy
inferredcites →https://doi.org/10.1016/j.msea.2005.09.072openalex-snapshot
Three defect types in friction stir welding of aluminum die casting alloy
inferredcites →https://doi.org/10.1016/j.msea.2006.06.056openalex-snapshot
The investigation of typical welding defects for 5456 aluminum alloy friction stir welds
inferredcites →https://doi.org/10.1016/j.msea.2006.06.089openalex-snapshot
Effect of friction stir processing with SiC particles on microstructure and hardness of AZ31
inferredcites →https://doi.org/10.1016/j.msea.2006.12.079openalex-snapshot
Influence of friction stir welding parameters on grain size and formability in 5083 aluminum alloy
inferredcites →https://doi.org/10.1016/j.msea.2006.12.124openalex-snapshot
Influences of pin profile and rotational speed of the tool on the formation of friction stir processing zone in AA2219 aluminium alloy
inferredcites →https://doi.org/10.1016/j.msea.2008.06.033openalex-snapshot
Precipitation microstructures in an AA6056 aluminium alloy after friction stir welding: Characterisation and modelling
inferredcites →https://doi.org/10.1016/j.msea.2008.08.018openalex-snapshot
Material flow in heterogeneous friction stir welding of thin aluminium sheets: Effect of shoulder geometry
inferredcites →https://doi.org/10.1016/j.mser.2005.07.001openalex-snapshot
Friction stir welding and processing
inferredcites →https://doi.org/10.1016/j.pmatsci.2008.05.001openalex-snapshot
Recent advances in friction-stir welding – Process, weldment structure and properties
inferredcites →https://doi.org/10.1016/j.pmatsci.2011.05.003openalex-snapshot
Integrated modeling of friction stir welding of 6xxx series Al alloys: Process, microstructure and properties
inferredcites →https://doi.org/10.1016/j.scriptamat.2005.01.003openalex-snapshot
Microstructural evolution of a heat-resistant magnesium alloy due to friction stir welding
inferredcites →https://doi.org/10.1016/j.scriptamat.2007.10.031openalex-snapshot
A flow-partitioned deformation zone model for defect formation during friction stir welding
inferredcites →https://doi.org/10.1016/s0921-5093(03)00053-4openalex-snapshot
The improvement of mechanical properties of friction-stir-welded A356 Al alloy
inferredcites →https://doi.org/10.1016/s0924-0136(02)00038-9openalex-snapshot
Isothermal sheet formability of magnesium alloy AZ31 and AZ61
inferredcites →https://doi.org/10.1016/s0924-0136(03)00684-8openalex-snapshot
Formability of stamping magnesium-alloy AZ31 sheets
inferredcites →https://doi.org/10.1016/s0924-0136(03)00806-9openalex-snapshot
Tensile properties and fracture locations of friction-stir-welded joints of 2017-T351 aluminum alloy
inferredcites →https://doi.org/10.1016/s1359-6454(02)00449-4openalex-snapshot
Microstructural investigation of friction stir welded 7050-T651 aluminium
inferredcites →https://doi.org/10.1016/s1359-6462(03)00301-4openalex-snapshot
The joint properties of dissimilar formed Al alloys by friction stir welding according to the fixed location of materials
inferredcites →https://doi.org/10.1016/s1359-6462(96)00344-2openalex-snapshot
Effects of friction stir welding on microstructure of 7075 aluminum
inferredcites →https://doi.org/10.1016/s1359-6462(97)00093-6openalex-snapshot
Microstructural aspects of the friction-stir welding of 6061-T6 aluminum
inferredcites →https://doi.org/10.1063/1.3589489openalex-snapshot
A statistically based methodology in the identification of friction welding parameters
inferredcites →https://doi.org/10.1088/0965-0393/12/1/013openalex-snapshot
An analytical model for the heat generation in friction stir welding
inferredcites →https://doi.org/10.1106/55tf-pf2g-jbh2-1q2bopenalex-snapshot
Heat Input and Temperature Distribution in Friction Stir Welding
inferredcites →https://doi.org/10.4028/www.scientific.net/kem.410-411.555openalex-snapshot
Tool Geometry in Friction Stir Welding of Magnesium Alloy Sheets
inferredcites →https://doi.org/10.4028/www.scientific.net/msf.638-642.1249openalex-snapshot
Formability of Friction Stir Welded AZ31 Magnesium Alloy Sheets
inferredcites →https://doi.org/10.4028/www.scientific.net/msf.638-642.3954openalex-snapshot
Friction Stir Welding of Magnesium Alloys under Different Process Parameters
inferredcites →https://doi.org/10.5860/choice.46-0901openalex-snapshot
Friction stir welding and processing
What points at this work
Incoming claims: where this work appears in other papers’ reference lists and arguments.
inferred← citeshttps://doi.org/10.1007/978-981-33-6029-7_61openalex-snapshot
Optimization of Friction Stir Welding Parameters for Similar Base Material Combinations
inferred← citeshttps://doi.org/10.1007/s00170-016-8734-xopenalex-snapshot
Effect of groove distribution in shoulder on formation, macrostructures, and mechanical properties of pinless friction stir welding of 6061-O aluminum alloy
inferred← citeshttps://doi.org/10.1007/s00170-017-1223-zopenalex-snapshot
In-process control strategies for friction stir welding of AZ31 sheets with non-uniform thickness
inferred← citeshttps://doi.org/10.1007/s00170-025-16540-5openalex-snapshot
Influence of the depth of scroll grooves of the shoulder and welding pressure on temperature distribution and material mixing during FSW of AA6063 aluminum alloy sheets
inferred← citeshttps://doi.org/10.1007/s11340-012-9679-0openalex-snapshot
Identification of the Local Elasto-Plastic Behavior of FSW Welds Using the Virtual Fields Method
inferred← citeshttps://doi.org/10.1007/s11665-013-0499-xopenalex-snapshot
Optimization of FS Welding Parameters for Improving Mechanical Behavior of AA2024-T351 Joints Based on Taguchi Method
inferred← citeshttps://doi.org/10.1007/s12209-014-2157-2openalex-snapshot
Pinless friction stir welding of AA2024-T3 joint and its failure modes
inferred← citeshttps://doi.org/10.1007/s40195-018-0725-5openalex-snapshot
Effects of Welding Speed and Post-weld Hot Rolling on Microstructure and Mechanical Properties of Friction Stir-Welded AZ31 Magnesium Alloy
inferred← citeshttps://doi.org/10.1007/s40684-017-0044-8openalex-snapshot
Influence of preheating source on mechanical properties and welding residual stress characteristics in ultra thin ferritic stainless steel hybrid friction stir welded joints
inferred← citeshttps://doi.org/10.1016/j.cirpj.2021.05.009openalex-snapshot
Effect of tool tilt angle on weld joint strength and microstructural characterization of double-sided friction stir welding of AZ31B magnesium alloy
inferred← citeshttps://doi.org/10.1016/j.cja.2020.05.037openalex-snapshot
Effects of traverse speed on weld formation, microstructure and mechanical properties of ZK60 Mg alloy joint by bobbin tool friction stir welding
inferred← citeshttps://doi.org/10.1016/j.jmapro.2018.11.003openalex-snapshot
Effect of self-reacting friction stir welding on microstructure and mechanical properties of Mg-Al-Zn alloy joints
inferred← citeshttps://doi.org/10.1016/j.jmapro.2020.08.006openalex-snapshot
Upon the effect of Zn during friction stir welding of aluminum-copper and aluminum-brass systems
inferred← citeshttps://doi.org/10.1016/j.jmatprotec.2016.12.018openalex-snapshot
Joint properties of ultra thin 430M2 ferritic stainless steel sheets by friction stir welding using pinless tool
inferred← citeshttps://doi.org/10.1016/j.jmatprotec.2023.117984openalex-snapshot
Semi-stationary shoulder bobbin-tool: A new approach in tailoring macrostructure and mechanical properties of bobbin-tool friction stir welds in magnesium alloy
inferred← citeshttps://doi.org/10.1016/j.jmrt.2024.04.241openalex-snapshot
Application of friction stir surface treatment for modification of peripheral coarse grain structure and mechanical properties of AZ31 Mg alloy
inferred← citeshttps://doi.org/10.1016/j.matchar.2016.12.005openalex-snapshot
Microstructure and mechanical properties of twin-roll cast Mg–6Zn–1Mn–1Al alloy joined by surface-friction welding
inferred← citeshttps://doi.org/10.1016/j.matdes.2011.11.017openalex-snapshot
Plastic flow behaviour and formability of friction stir welded joints in AZ31 thin sheets obtained using the “pinless” tool configuration
inferred← citeshttps://doi.org/10.1016/j.matdes.2012.04.057openalex-snapshot
Effect of the welding parameters and tool configuration on micro- and macro-mechanical properties of similar and dissimilar FSWed joints in AA5754 and AZ31 thin sheets
inferred← citeshttps://doi.org/10.1016/j.matdes.2012.06.005openalex-snapshot
Microstructural characteristics and mechanical properties of non-combustive Mg–9Al–Zn–Ca magnesium alloy friction stir welded joints
inferred← citeshttps://doi.org/10.1016/j.matdes.2013.12.021openalex-snapshot
Defects and tensile properties of 6013 aluminum alloy T-joints by friction stir welding
inferred← citeshttps://doi.org/10.1016/j.matdes.2014.07.023openalex-snapshot
Effects of tool rotational and welding speed on microstructure and mechanical properties of bobbin-tool friction-stir welded Mg AZ31
inferred← citeshttps://doi.org/10.1016/j.matdes.2014.08.014openalex-snapshot
Optimization of microstructural and mechanical properties of friction stir welding using the cellular automaton and Taguchi method
inferred← citeshttps://doi.org/10.1016/j.matdes.2014.12.008openalex-snapshot
The dissimilar friction stir lap welding of 1A99 Al to pure Cu using Zn as filler metal with “pinless” tool configuration
inferred← citeshttps://doi.org/10.1016/j.matdes.2015.03.040openalex-snapshot
Double-sided friction-stir welding of magnesium alloy with concave–convex tools for texture control
inferred← citeshttps://doi.org/10.1016/j.matdes.2015.12.099openalex-snapshot
Effect of welding motion and pre-/post-annealing of friction stir welded AA5754 joints
inferred← citeshttps://doi.org/10.1016/j.matpr.2017.12.006openalex-snapshot
Effect of various tool pin profiles on temperature rise and mechanical properties of friction stir processed AZ31Mg alloy
inferred← citeshttps://doi.org/10.1016/j.matpr.2017.12.027openalex-snapshot
Effect of process parameters on mechanical and metallurgical properties of friction stir processed AZ31Mg alloy
inferred← citeshttps://doi.org/10.1016/j.matpr.2018.10.025openalex-snapshot
Mathematical Modeling of Process Parameters of Friction Stir Welded Aluminium Alloy Joints Using Central Composite Design
inferred← citeshttps://doi.org/10.1016/j.matpr.2021.03.082openalex-snapshot
Friction stir welding of AZ31 magnesium alloy: A review
inferred← citeshttps://doi.org/10.1016/j.mtcomm.2023.105406openalex-snapshot
Improving tensile properties by varying the welding conditions of the passes of the double-sided friction stir welding of AZ31B magnesium alloy
inferred← citeshttps://doi.org/10.1016/j.mtcomm.2023.107600openalex-snapshot
Experimental and numerical assessment of thermomechanical and morphological characteristics of pin and pinless micro friction stir welds
inferred← citeshttps://doi.org/10.1016/j.procir.2014.06.099openalex-snapshot
Micro- and Macro- Mechanical Properties of Pinless Friction Stir Welded Joints in AA5754 Aluminium Thin Sheets
inferred← citeshttps://doi.org/10.1016/j.procir.2016.06.081openalex-snapshot
Sustainability Analysis of Friction Stir Welding of AA5754 Sheets
inferred← citeshttps://doi.org/10.1016/j.proeng.2014.03.153openalex-snapshot
Influence of Shoulder Geometry and Coating of the Tool on the Friction Stir Welding of Aluminium Alloy Plates
inferred← citeshttps://doi.org/10.1016/j.proeng.2017.04.023openalex-snapshot
Design of Stamping Processes of Pinless FSWed Thin Sheets in AA1050 Alloy for Motomotive Applications Using FEM
inferred← citeshttps://doi.org/10.1051/matecconf/201926902004openalex-snapshot
Effect of Rotational Speed and Flat Tool Diameter on the Zn Distribution of the Dissimilar Metals Friction Stir Spot Welded between Aluminum Alloy 5083 H321 and Galvanized Steel
inferred← citeshttps://doi.org/10.1063/1.4963502openalex-snapshot
In-process tool force and rotation variation to control sheet thickness change in friction stir welding of magnesium alloys
inferred← citeshttps://doi.org/10.1063/1.5008135openalex-snapshot
In-process tool rotational speed variation with constant heat input in friction stir welding of AZ31 sheets with variable thickness
inferred← citeshttps://doi.org/10.1080/09507116.2025.2610426openalex-snapshot
Cyclic deformation and residual stress characteristics of ultra-thin aluminium lap joints by pinless friction stir welding
inferred← citeshttps://doi.org/10.1080/13621718.2018.1432098openalex-snapshot
Effect of rotation speed on microstructure and mechanical properties of bobbin tool friction stir welded AZ61 magnesium alloy
inferred← citeshttps://doi.org/10.1088/1757-899x/1116/1/012017openalex-snapshot
Mechanical Behavior of the Aluminum Alloys during Friction stirs welding process: An overview
inferred← citeshttps://doi.org/10.1088/2053-1591/aac6f6openalex-snapshot
Comprehensive optimization of friction stir weld parameters of lap joint AA1100 plates using artificial neural networks and modified NSGA-II
inferred← citeshttps://doi.org/10.1109/icaccm61117.2024.11059037openalex-snapshot
Impact of friction stir welding parameters and materials on mechanical and metallurgical properties and benefits, drawbacks, and potential uses: A summary
inferred← citeshttps://doi.org/10.1155/2014/697170openalex-snapshot
Friction Stir Spot Welding: A Review on Joint Macro- and Microstructure, Property, and Process Modelling
inferred← citeshttps://doi.org/10.1177/0954408916665651openalex-snapshot
Investigation on the best process criteria for lap joint friction stir welding of AA1100 aluminum alloy via Taguchi technique and ANOVA
inferred← citeshttps://doi.org/10.17222/mit.2020.205openalex-snapshot
MANUFACTURING THINNED FRICTION-STIR WELDED 1050 ALUMINUM BY POST ROLLING: MICROSTRUCTURE AND MECHANICAL PROPERTIES
inferred← citeshttps://doi.org/10.20961/mekanika.v17i1.35046openalex-snapshot
Pengaruh variasi kecepatan putar dan diameter tool terhadap sifat mekanik sambungan fssw aluminium alloy 5052 dan baja ss400
inferred← citeshttps://doi.org/10.2351/1.5062505openalex-snapshot
Studying the effect of laser welding parameters on the quality of ZEK100 magnesium alloy sheets in lap joint configuration
inferred← citeshttps://doi.org/10.24247/ijmperdapr201872openalex-snapshot
Effect of Friction Stir Welding Parameters on Impact Strength of the AZ31 Magnesium Alloy Joints
inferred← citeshttps://doi.org/10.2507/daaam.scibook.2015.22openalex-snapshot
A Critical Review of Friction Stir Welding Process
inferred← citeshttps://doi.org/10.3390/ma17112602openalex-snapshot
Microstructure Evolution and Mechanical Properties of 7A52 Aluminum Alloy Thin Sheet Repaired with Friction Stir Surfacing
inferred← citeshttps://doi.org/10.3390/ma6125923openalex-snapshot
Analysis and Comparison of Friction Stir Welding and Laser Assisted Friction Stir Welding of Aluminum Alloy
inferred← citeshttps://doi.org/10.4028/www.scientific.net/kem.504-506.3openalex-snapshot
Friction Based Solid State Welding Processes
inferred← citeshttps://doi.org/10.4028/www.scientific.net/kem.504-506.747openalex-snapshot
Experimental and Numerical Analysis on FSWed Magnesium Alloy Thin Sheets Obtained Using “Pin” and “Pinless” Tool
inferred← citeshttps://doi.org/10.4028/www.scientific.net/kem.622-623.459openalex-snapshot
Bending and Stamping Processes of FSWed Thin Sheets in AA1050 Alloy
inferred← citeshttps://doi.org/10.4028/www.scientific.net/kem.622-623.540openalex-snapshot
Robotic Friction Stir Welding of AA5754 Aluminum Alloy Sheets at Different Initial Temper States
inferred← citeshttps://doi.org/10.5281/zenodo.38344openalex-snapshot
Layered Encryption Techniques For Dct-Coded Visual Data
inferred← citeshttps://doi.org/10.55041/ijsrem28740openalex-snapshot
Advancements and Applications of Friction Stir Welding: A Comprehensive Review
Editorial review for independent work. ICSAC — the Institute for Complexity
Science and Advanced Computing — runs a structured editorial panel for researchers
publishing outside journals, and publishes on CiteStamp rails. Submission is free
and goes through ORCID: icsacinstitute.org/submit.