On the public citation graph
Element diffusion model of bimetallic hot deformation in metallurgical bonding process
0 signed · 81 inferred · view as graph
Inferred edges come from two machine sources: sweeps of open repository metadata (mostly SSRN and Zenodo), and a bulk OpenAlex citation snapshot. Every row below is labelled with the one it came from. Neither is a complete citation index — absence here is not evidence of absence.
Is this your work? Sign in with ORCID and put your name on the
claims that are yours.
Reference health. See whether every reference in this work resolves to a
known work and none has been retracted — and get a dated CiteStamped
badge you can embed.
What this work says
Outgoing claims: the papers this work cites, builds on, or argues with.
inferredcites →https://doi.org/10.1007/s40195-016-0371-8openalex-snapshot
Tearing Toughness of Ductile Metals
inferredcites →https://doi.org/10.1016/j.actamat.2006.12.040openalex-snapshot
Atomistic investigation of the effects of temperature and surface roughness on diffusion bonding between Cu and Al
inferredcites →https://doi.org/10.1016/j.actamat.2010.11.040openalex-snapshot
Diffusion-induced recrystallization in nickel/palladium multilayers
inferredcites →https://doi.org/10.1016/j.actamat.2011.01.044openalex-snapshot
First-principles investigation of the effect of carbon on the stacking fault energy of Fe–C alloys
inferredcites →https://doi.org/10.1016/j.actamat.2012.03.009openalex-snapshot
On the mechanism of diffusion-induced recrystallization: Comparison between experiment and molecular dynamics simulations
inferredcites →https://doi.org/10.1016/j.actamat.2013.04.058openalex-snapshot
Sluggish diffusion in Co–Cr–Fe–Mn–Ni high-entropy alloys
inferredcites →https://doi.org/10.1016/j.commatsci.2011.07.011openalex-snapshot
Strain function analysis method for void closure in the forging process of the large-sized steel ingot
inferredcites →https://doi.org/10.1016/j.commatsci.2014.04.056openalex-snapshot
A criterion for void closure in the porous model during the forging of steel ingot and its application
inferredcites →https://doi.org/10.1016/j.commatsci.2014.07.021openalex-snapshot
Material-based design of the extrusion of bimetallic tubes
inferredcites →https://doi.org/10.1016/j.compositesb.2011.04.045openalex-snapshot
Influence of heat treatment on interface of Cu/Al bimetal composite fabricated by cold rolling
inferredcites →https://doi.org/10.1016/j.fusengdes.2013.12.023openalex-snapshot
Diffusion bonding of 9Cr ODS ferritic/martensitic steel with a phase transformation
inferredcites →https://doi.org/10.1016/j.ijplas.2013.02.017openalex-snapshot
Numerical simulation and experimental verification of void evolution inside large forgings during hot working
inferredcites →https://doi.org/10.1016/j.intermet.2004.12.017openalex-snapshot
Laminates based on an iron aluminide intermetallic alloy and a CrMo steel
inferredcites →https://doi.org/10.1016/j.intermet.2012.11.012openalex-snapshot
Extracting interdiffusion coefficients from binary diffusion couples using traditional methods and a forward-simulation method
inferredcites →https://doi.org/10.1016/j.jmatprotec.2008.04.051openalex-snapshot
A criterion for void closure in large ingots during hot forging
inferredcites →https://doi.org/10.1016/j.jmatprotec.2011.01.017openalex-snapshot
Internal void closure during the forging of large cast ingots using a simulation approach
inferredcites →https://doi.org/10.1016/j.jnucmat.2015.05.026openalex-snapshot
Intermetallic formation and interdiffusion in diffusion couples made of uranium and single crystal iron
inferredcites →https://doi.org/10.1016/j.matchar.2012.03.016openalex-snapshot
Diffusion bonding titanium to stainless steel using Nb/Cu/Ni multi-interlayer
inferredcites →https://doi.org/10.1016/j.matdes.2009.09.049openalex-snapshot
Microstructure and mechanical properties of diffusion bonded SiC/steel joint using W/Ni interlayer
inferredcites →https://doi.org/10.1016/j.matdes.2011.05.012openalex-snapshot
Diffusion bonding of AISI 304L steel to low-carbon steel with AISI 304L steel interlayer
inferredcites →https://doi.org/10.1016/j.matdes.2011.10.041openalex-snapshot
Influence of interface microstructure on the mechanical properties of titanium/17-4 PH stainless steel solid state diffusion bonded joints
inferredcites →https://doi.org/10.1016/j.matdes.2011.12.024openalex-snapshot
Effect of phase transformation and intermetallic compounds on the microstructure and tensile strength properties of diffusion-bonded joints between Ti–6Al–4V and AISI 304L
inferredcites →https://doi.org/10.1016/j.matdes.2012.02.058openalex-snapshot
Diffusion bonding of titanium alloy to micro-duplex stainless steel using a nickel alloy interlayer: Interface microstructure and strength properties
inferredcites →https://doi.org/10.1016/j.matdes.2014.05.050openalex-snapshot
An investigation on bonding mechanism and mechanical properties of Al/Ti compound materials prepared by insert moulding
inferredcites →https://doi.org/10.1016/j.matdes.2014.06.067openalex-snapshot
Effects of temperature and strain rate on microstructure and mechanical properties of high chromium cast iron/low carbon steel bimetal prepared by hot diffusion-compression bonding
inferredcites →https://doi.org/10.1016/j.matdes.2014.09.071openalex-snapshot
Characterization of the diffusion bonding behavior of pure Ti and Ni with different surface roughness during hot pressing
inferredcites →https://doi.org/10.1016/j.matlet.2015.06.087openalex-snapshot
Prediction of the local deformation mechanisms in metastable austenitic steels from the local concentration of the main alloying elements
inferredcites →https://doi.org/10.1016/j.msea.2007.08.076openalex-snapshot
Hot pressing diffusion bonding of a titanium alloy to a stainless steel with an aluminum alloy interlayer
inferredcites →https://doi.org/10.1016/j.msea.2011.02.050openalex-snapshot
Evaluation of interface microstructure and mechanical properties of the diffusion bonded joints of Ti–6Al–4V alloy to micro-duplex stainless steel
inferredcites →https://doi.org/10.1016/j.msea.2012.09.069openalex-snapshot
Interfacial reactions and strength properties in dissimilar titanium alloy/Ni alloy/microduplex stainless steel diffusion bonded joints
inferredcites →https://doi.org/10.1016/j.proeng.2015.05.034openalex-snapshot
Finite Difference Solution of the Diffusion Equation and Calculation of the Interdiffusion Coefficient using the Sauer-Freise and Hall Methods in Binary Systems
inferredcites →https://doi.org/10.1016/j.scriptamat.2009.10.012openalex-snapshot
Concentration characteristics of diffusion-induced recrystallization in Cu/CuAu multilayers of varying lattice mismatch
inferredcites →https://doi.org/10.1016/j.tsf.2009.08.026openalex-snapshot
Mechanisms of interdiffusion in Pd–Cu thin film diffusion couples
inferredcites →https://doi.org/10.1016/j.vacuum.2015.05.034openalex-snapshot
Inter-diffusion behavior of Ni/Fe/Ni laminated composite for magnetic and electromagnetic interference shielding
inferredcites →https://doi.org/10.1016/s0167-577x(98)00172-4openalex-snapshot
Stacking fault energy of iron-base shape memory alloys
inferredcites →https://doi.org/10.1016/s0921-5093(02)00686-xopenalex-snapshot
Microstructure and mechanical properties of carbon steel A210–superalloy Sanicro 28 bimetallic tubes
inferredcites →https://doi.org/10.1016/s1001-0521(08)60062-5openalex-snapshot
Effects of deformation parameters on microstructure and mechanical properties of magnesium alloy AZ31B
inferredcites →https://doi.org/10.2172/889030openalex-snapshot
Physical and Numerical Analysis of Extrusion Process for Production of Bimetallic Tubes
What points at this work
Incoming claims: where this work appears in other papers’ reference lists and arguments.
inferred← citeshttps://doi.org/10.2139/ssrn.4813286openalex-extracted
Study of the mechanical properties and metallurgical behavior of nickel-based coatings: atmospheric plasma spraying，plasma spray melting
inferred← citeshttps://doi.org/10.1007/s00170-018-1634-5openalex-snapshot
Enhancement of corrosion protection performance of SUS304/Q235B dissimilar metals lap joint through fiber laser
inferred← citeshttps://doi.org/10.1007/s11223-018-9945-1openalex-snapshot
Prediction of a High Temperature Bonding Condition at the Interface for the Hot-Rolled Stainless Steel Clad Plate on Rolling
inferred← citeshttps://doi.org/10.1007/s11595-018-1918-5openalex-snapshot
Effect of Reduction on Bonding Interface of Hot-rolled Wear-resistant Steel BTW1/Q345R Cladding Plate
inferred← citeshttps://doi.org/10.1007/s11661-021-06381-8openalex-snapshot
Investigation into Atomic Diffusion at the Interface During Extrusion Welding of Magnesium and Magnesium Alloys
inferred← citeshttps://doi.org/10.1007/s11663-018-1313-9openalex-snapshot
Interfacial Microstructural Evolution and Metallurgical Bonding Mechanisms for IN718 Superalloy Joint Produced by Hot Compressive Bonding
inferred← citeshttps://doi.org/10.1007/s11663-022-02538-xopenalex-snapshot
Element Migration and Diffusion at the Bonding Interface of the Bimetallic Composite Billet Produced by the ESRC Method
inferred← citeshttps://doi.org/10.1007/s11665-021-05806-0openalex-snapshot
Effect of Laser Remelting on Microstructure and Properties of AlCoCrFeNi High-Entropy Alloy Coating
inferred← citeshttps://doi.org/10.1007/s11665-022-06836-yopenalex-snapshot
Preparation of Ni45 Alloy Coating with Directional Structure and its Wear Resistance
inferred← citeshttps://doi.org/10.1007/s11665-025-11566-yopenalex-snapshot
Study of the Mechanical Properties and Metallurgical Behavior of Nickel-Based Coatings: Atmospheric Plasma Spraying and Plasma Spray Melting
inferred← citeshttps://doi.org/10.1007/s11665-026-13612-9openalex-snapshot
Wave Deformation Hardening of Bimetallic Materials with a Copper Alloy Coating on a Steel Substrate
inferred← citeshttps://doi.org/10.1007/s12540-024-01682-0openalex-snapshot
A Study on the Microstructural Evolution, Interfacial Diffusion and Mechanical Properties of Ultra-thin Stainless Steel–Copper Composites Fabricated by Roll Bonding
inferred← citeshttps://doi.org/10.1007/s12666-017-1194-7openalex-snapshot
Effects of Laser Remelting on Salt Spray Corrosion Behaviors of Arc-Sprayed Al Coatings in 3.5% NaCl Sea Environment
inferred← citeshttps://doi.org/10.1016/j.addma.2025.104961openalex-snapshot
Microstructure characteristics of LPBF&HIP fabricated graded composite transition joint between ferritic steel and austenitic stainless steel
inferred← citeshttps://doi.org/10.1016/j.cja.2022.07.004openalex-snapshot
Recent advances and trends in roll bonding process and bonding model: A review
inferred← citeshttps://doi.org/10.1016/j.ijmecsci.2025.110108openalex-snapshot
Modeling of element diffusion behavior in bimetallic compound layer
inferred← citeshttps://doi.org/10.1016/j.jallcom.2019.153559openalex-snapshot
Joints of TiBw/Ti6Al4V composites- Inconel 718 alloys dissimilar joining using Nb and Cu interlayers
inferred← citeshttps://doi.org/10.1016/j.jallcom.2025.180491openalex-snapshot
Variable coefficient element diffusion model and microstructure evolution of Mg/Al bimetals during thermal bonding process
inferred← citeshttps://doi.org/10.1016/j.jallcom.2026.191519openalex-snapshot
Coupled deformation-diffusion processing window for bimetal interface bonding
inferred← citeshttps://doi.org/10.1016/j.jeurceramsoc.2026.118621openalex-snapshot
Achieving dual direct interfacial bonding in AlN and SiCp/Al joints enabled by Mg-induced synchronous deoxidation
inferred← citeshttps://doi.org/10.1016/j.jmatprotec.2017.10.045openalex-snapshot
Element diffusion model with variable coefficient in bimetallic bonding process
inferred← citeshttps://doi.org/10.1016/j.jmatprotec.2023.117971openalex-snapshot
Cross wedge roll bonding process for laminated shafts forming: Interface microstructure, bonding mechanism, and parameter influence
inferred← citeshttps://doi.org/10.1016/j.jmatprotec.2025.118736openalex-snapshot
Advances in mechanism and application of diffusion bonding of titanium alloys
inferred← citeshttps://doi.org/10.1016/j.jmrt.2022.05.085openalex-snapshot
Investigation of compact tensile and fracture mechanical properties of a duplex stainless steel bimetal composite with the interfacial zone
inferred← citeshttps://doi.org/10.1016/j.jmrt.2023.03.079openalex-snapshot
Effect of inhomogeneous plastic deformation on the interfacial microstructure and properties of titanium/stainless steel
inferred← citeshttps://doi.org/10.1016/j.jmst.2019.08.044openalex-snapshot
Effect of strain rate on plastic deformation bonding behavior of Ni-based superalloys
inferred← citeshttps://doi.org/10.1016/j.jmst.2019.11.015openalex-snapshot
Microstructure evolutions and interfacial bonding behavior of Ni-based superalloys during solid state plastic deformation bonding
inferred← citeshttps://doi.org/10.1016/j.matdes.2016.06.086openalex-snapshot
Structural evaluation and deformation features of interface of joint between nano-crystalline Fe–Ni–Cr alloy and nano-crystalline Ni during creep process
inferred← citeshttps://doi.org/10.1016/j.matdes.2017.05.055openalex-snapshot
Intermetallic formation and mechanical properties of Ni-Ti diffusion couples
inferred← citeshttps://doi.org/10.1016/j.msea.2020.139513openalex-snapshot
Interfacial characteristics and mechanical properties of duplex stainless steel bimetal composite by heat treatment
inferred← citeshttps://doi.org/10.1016/j.msea.2025.149433openalex-snapshot
Effect of heat treatment on the interfacial characteristics and mechanical properties of bimetal composite
inferred← citeshttps://doi.org/10.1016/j.mtcomm.2026.115681openalex-snapshot
Crystallographic characteristics of shared high-temperature FCC grains in hot-rolled stainless steel/carbon steel clad plates
inferred← citeshttps://doi.org/10.1016/j.pnucene.2026.106520openalex-snapshot
Chemical compatibility of Zircaloy-4 with T91 for manufacturing of metallurgically bonded co-extruded clad tube
inferred← citeshttps://doi.org/10.1016/j.surfcoat.2019.02.083openalex-snapshot
Effect of induction remelting on microstructure and wear resistance of plasma sprayed NiCrBSiNb coatings
inferred← citeshttps://doi.org/10.1016/j.surfcoat.2019.125058openalex-snapshot
Influence of Al2O3 mass fractions on microstructure, oxidation resistance and friction–wear behaviors of CoCrAlYTaSi coatings
inferred← citeshttps://doi.org/10.1021/acs.langmuir.3c01524openalex-snapshot
Influence of the Surface State on the Interfacial Bonding Strength of the Cold-Rolled Brass/Carbon Steel Composite
inferred← citeshttps://doi.org/10.1080/01694243.2021.1952013openalex-snapshot
Bonding process and mechanisms of interface evolution of stainless steel clad plates fabricated by cyclic phase transformation heat treatment
inferred← citeshttps://doi.org/10.2139/ssrn.7312190openalex-snapshot
Study on the interface evolution and strengthening mechanism of AA6061/AA7075 laminated aluminum alloy during hot deformation
inferred← citeshttps://doi.org/10.3390/coatings10060549openalex-snapshot
Atomistic Simulations and Experimental Investigations of the Diffusion Behavior of Steel/ZCuPb20Sn5 Bimetals
inferred← citeshttps://doi.org/10.3390/cryst12010081openalex-snapshot
Study on the High-Temperature Deformation and Dynamic Recrystallization Behavior near the Interface of Stainless Steel Cladding
inferred← citeshttps://doi.org/10.3390/met10101365openalex-snapshot
Microstructural Evolution and Mechanical Properties of Hybrid Bevel Gears Manufactured by Tailored Forming
inferred← citeshttps://doi.org/10.3390/met8050329openalex-snapshot
Study of a Bimetallic Interfacial Bonding Process Based on Ultrasonic Quantitative Evaluation
inferred← citeshttps://doi.org/10.48084/etasr.1856openalex-snapshot
Interface Structure and Elements Diffusion of As-Cast and Annealed Ductile Iron/Stainless Steel Bimetal Castings
Editorial review for independent work. ICSAC — the Institute for Complexity
Science and Advanced Computing — runs a structured editorial panel for researchers
publishing outside journals, and publishes on CiteStamp rails. Submission is free
and goes through ORCID: icsacinstitute.org/submit.