Chemically converting residual lithium to a composite coating layer to enhance the rate capability and stability of single-crystalline Ni-rich cathodes
Inferred edges come from two machine sources: sweeps of open repository
metadata (mostly SSRN and Zenodo), and a bulk OpenAlex citation snapshot. Every row below is
labelled with the one it came from. Neither is a complete citation index — absence here is not
evidence of absence.
Is this your work? Sign in with ORCID and put your name on the
claims that are yours.
Reference health. See whether every reference in this work resolves to a
known work and none has been retracted — and get a dated CiteStamped
badge you can embed.
Comparison of the structural and electrochemical properties of layered Li[NixCoyMnz]O2 (x = 1/3, 0.5, 0.6, 0.7, 0.8 and 0.85) cathode material for lithium-ion batteries
Graphene-analogous structural MoS2 modification to improve electrochemical properties of Ni-rich layered oxide cathode material for lithium-ion batteries
In Situ Tuning Residual Lithium Compounds and Constructing TiO2 Coating for Surface Modification of a Nickel-Rich Cathode toward High-Energy Lithium-Ion Batteries
Molybdate flux growth of idiomorphic Li(Ni 1/3 Co 1/3 Mn 1/3 )O 2 single crystals and characterization of their capabilities as cathode materials for lithium-ion batteries
Synthesis, Thermal, and Electrochemical Properties of AlPO[sub 4]-Coated LiNi[sub 0.8]Co[sub 0.1]Mn[sub 0.1]O[sub 2] Cathode Materials for a Li-Ion Cell
Gas Evolution and Surface Chemistry Analysis of Battery Materials by Differential Electrochemical Mass Spectrometry ( DEMS ) and Time‐of‐Flight Secondary Ion Mass Spectrometry ( TOF ‐ SIMS )
Tungsten Boride Stabilized Single‐Crystal LiNi 0.83 Co 0.07 Mn 0.1 O 2 Cathode for High Energy Density Lithium‐Ion Batteries: Performance and Mechanisms
A Trailblazing Quenching Strategy for Simultaneous LiF Formation at Surface and Intergranular Interfaces for Enhanced Stability of High‐Ni NCM Cathodes
Suppressing interfacial structure failure of Ni-rich cathode materials under high work voltage towards improved cycling stability enabled via Li2MnO3-based surface construction
New insights into dry-coating-processed surface engineering enabling structurally and thermally stable high-performance Ni-rich cathode materials for lithium ion batteries
Integrated strategy of bulk doping and surface coating to enhance lithium storage performance of single-crystal Ni-rich cathode for lithium-ion battery
Smart-responsive sustained-release capsule design enables superior air storage stability and reinforced electrochemical performance of cobalt-free nickel-rich layered cathodes for lithium-ion batteries
Boosting the kinetic properties and suppressing the irreversible oxygen redox of lithium-rich manganese-based cathode materials through combined strategies of fast ionic conductor and oxygen vacancy
Stabilizing LiNi0.8Co0.1Mn0.1O2 cathodes with a mixed ionic-electronic conducting Li0.34La0.55MnO3- multifunctional coating formed via in-situ conversion of surface Li residual
Synergistically dissipating the local strain and restraining lattice oxygen escape by fine-tuning of microstructure enabling Ni-rich cathodes with superior cyclabilities
Turning waste into treasure: A dual-modulation strategy for Ni-rich cathode towards moderate Li/Ni mixing and Li2CO3 encapsulation to enhance lithium storage
A Synergistic Modification of Surface Coating and TM/Li Layer Doping by Li1.2Zr1.9Mg0.1(PO4)3 to Improve the Structural and Cycling Stability of LiNi0.90Co0.05Mn0.05O2
Phosphate and Borate-Based Composite Interface of Single-Crystal LiNi0.8Co0.1Mn0.1O2 Enables Excellent Electrochemical Stability at High Operation Voltage
Editorial review for independent work. ICSAC — the Institute for Complexity
Science and Advanced Computing — runs a structured editorial panel for researchers
publishing outside journals, and publishes on CiteStamp rails. Submission is free
and goes through ORCID: icsacinstitute.org/submit.