On the public citation graph

Milling Force Modeling: A Comparison of Two Approaches

https://doi.org/10.1016/j.promfg.2016.08.010
0 signed · 81 inferred · view as graph

Inferred edges come from two machine sources: sweeps of open repository metadata (mostly SSRN and Zenodo), and a bulk OpenAlex citation snapshot. Every row below is labelled with the one it came from. Neither is a complete citation index — absence here is not evidence of absence.

Is this your work? Sign in with ORCID and put your name on the claims that are yours.
Claim with ORCID
Reference health. See whether every reference in this work resolves to a known work and none has been retracted — and get a dated CiteStamped badge you can embed.
See reference health

What this work says

Outgoing claims: the papers this work cites, builds on, or argues with.

inferredcites →https://doi.org/10.1007/bf01582221openalex-snapshot
On the convergence of interior-reflective Newton methods for nonlinear minimization subject to bounds
inferredcites →https://doi.org/10.1016/0020-7357(61)90041-5openalex-snapshot
An investigation into the cutting force pulsations during milling operations
inferredcites →https://doi.org/10.1016/0890-6955(94)90052-3openalex-snapshot
The prediction of cutting forces in the ball-end milling process—I. Model formulation and model building procedure
inferredcites →https://doi.org/10.1016/j.ijmachtools.2004.01.015openalex-snapshot
Investigation of the effect of rake angle on main cutting force
inferredcites →https://doi.org/10.1016/j.ijmachtools.2006.06.014openalex-snapshot
Runout effects in milling: Surface finish, surface location error, and stability
inferredcites →https://doi.org/10.1016/j.ijmachtools.2010.05.009openalex-snapshot
A method for the identification of the specific force coefficients for mechanistic milling simulation
inferredcites →https://doi.org/10.1016/j.precisioneng.2015.04.006openalex-snapshot
Speed-varying cutting force coefficient identification in milling
inferredcites →https://doi.org/10.1016/j.procir.2014.03.019openalex-snapshot
Chatter Stability Prediction in Milling Using Speed-varying Cutting Force Coefficients
inferredcites →https://doi.org/10.1016/s0007-8506(07)62486-xopenalex-snapshot
Efficient Simulation Programs for Chatter in Milling
inferredcites →https://doi.org/10.1016/s0007-8506(07)63244-2openalex-snapshot
Present Situation and Future Trends in Modelling of Machining Operations Progress Report of the CIRP Working Group ‘Modelling of Machining Operations’
inferredcites →https://doi.org/10.1016/s0890-6955(02)00162-1openalex-snapshot
Finite element analysis and simulation of machining: an addendum
inferredcites →https://doi.org/10.1017/cbo9780511843723openalex-snapshot
Manufacturing Automation
inferredcites →https://doi.org/10.1115/1.1399383openalex-snapshot
Manufacturing Automation: Metal Cutting Mechanics, Machine Tool Vibrations, and CNC Design
inferredcites →https://doi.org/10.1115/1.2831014openalex-snapshot
Prediction of Milling Force Coefficients From Orthogonal Cutting Data
inferredcites →https://doi.org/10.1115/1.2836805openalex-snapshot
Machining Process Modeling: A Review
inferredcites →https://doi.org/10.1115/1.2899674openalex-snapshot
An Overview of Modeling and Simulation of the Milling Process
inferredcites →https://doi.org/10.1115/1.4009380openalex-snapshot
Basic Mechanics of the Metal-Cutting Process
inferredcites →https://doi.org/10.1115/1.4019606openalex-snapshot
An Analysis of the Milling Process

What points at this work

Incoming claims: where this work appears in other papers’ reference lists and arguments.

inferred← citeshttps://doi.org/10.2139/ssrn.4573384openalex-extracted
inferred← citeshttps://doi.org/10.1002/admt.202200092openalex-snapshot
One‐Step Soft Templated Selective Milling‐Based Circuit Patterning for Eco‐Friendly and High‐Throughput Manufacturing of Flexible Electronics
inferred← citeshttps://doi.org/10.1007/978-3-030-99666-6_38openalex-snapshot
Cutting Force Modeling in a Three-Axis Milling Process Based on Cutting Tool – Workpiece Interaction
inferred← citeshttps://doi.org/10.1007/978-3-319-75677-6_20openalex-snapshot
Preliminary Investigations for the Effect of Cutting Tool Edge Geometry in High-Feed Face Milling
inferred← citeshttps://doi.org/10.1007/978-3-319-93707-6_8openalex-snapshot
Machining Tribology
inferred← citeshttps://doi.org/10.1007/s00170-018-1967-0openalex-snapshot
Trochoidal milling: investigation of a new approach on uncut chip thickness modeling and cutting force simulation in an alternative path planning strategy
inferred← citeshttps://doi.org/10.1007/s00170-019-04262-4openalex-snapshot
Influence of minimum quantity lubrication in the surface quality of milled maraging steel
inferred← citeshttps://doi.org/10.1007/s00170-019-04448-wopenalex-snapshot
Prediction of surface variation field in face milling via finite element model updating with considering force-deformation coupling
inferred← citeshttps://doi.org/10.1007/s00170-020-05319-5openalex-snapshot
Predicting milling force variation in time and space domain for multi-toothed face milling
inferred← citeshttps://doi.org/10.1007/s00170-020-05322-wopenalex-snapshot
Ensemble transfer learning for refining stability predictions in milling using experimental stability states
inferred← citeshttps://doi.org/10.1007/s00170-021-07545-xopenalex-snapshot
Voxel-based modeling of transient material removal in machining
inferred← citeshttps://doi.org/10.1007/s00170-021-07657-4openalex-snapshot
A general method for calibration of milling force coefficients and cutter runout parameters simultaneously for helical end milling
inferred← citeshttps://doi.org/10.1007/s00170-022-09734-8openalex-snapshot
Dynamic simulation whole process optimization and experimental verification of milling aviation aluminum alloy aircraft structure
inferred← citeshttps://doi.org/10.1007/s00170-023-11233-3openalex-snapshot
Real-time milling force monitoring based on a parallel deep learning model with dual-channel vibration fusion
inferred← citeshttps://doi.org/10.1007/s00170-024-13913-0openalex-snapshot
Development and implementation of a novel split-wise model to predict the cutting forces in milling of Al2024 for minimum error
inferred← citeshttps://doi.org/10.1007/s10845-023-02243-9openalex-snapshot
Investigation on eXtreme Gradient Boosting for cutting force prediction in milling
inferred← citeshttps://doi.org/10.1007/s11665-021-05507-8openalex-snapshot
Prediction of Cutting Forces in Milling Using Machine Learning Algorithms and Finite Element Analysis
inferred← citeshttps://doi.org/10.1007/s11665-025-10901-7openalex-snapshot
Machinability of Electron Beam Powder Bed Fused Ti-6Al-4V in Face Milling with Coated Carbide End Mill
inferred← citeshttps://doi.org/10.1007/s12541-022-00677-4openalex-snapshot
In-Process Identification of the Cutting Force Coefficients in Milling based on a Virtual Machining Model
inferred← citeshttps://doi.org/10.1007/s40799-021-00517-6openalex-snapshot
Experiment and Modeling of Milling Force Based on Tool Edge Preparation
inferred← citeshttps://doi.org/10.1007/s42417-023-01152-8openalex-snapshot
A Rotor Dynamics based Higher Order Stability Model to Investigate the Stability of High-Speed Micromilling
inferred← citeshttps://doi.org/10.1016/j.cirpj.2020.11.006openalex-snapshot
The energetic characteristics of milling with changing cross-section in the definition of specific cutting force by FEM method
inferred← citeshttps://doi.org/10.1016/j.conengprac.2020.104442openalex-snapshot
Energy optimal control of an over-actuated hybrid feed drive under variable-frequency disturbances — with application to machining
inferred← citeshttps://doi.org/10.1016/j.jmapro.2022.05.034openalex-snapshot
Tool damage state condition monitoring in milling processes based on the mechanistic model goodness-of-fit metrics
inferred← citeshttps://doi.org/10.1016/j.jmapro.2023.03.033openalex-snapshot
Model-based feed rate optimization for cycle time reduction in milling
inferred← citeshttps://doi.org/10.1016/j.jmapro.2023.05.046openalex-snapshot
Optimization of cutting force fitting model by Fast Fourier Transformation in milling
inferred← citeshttps://doi.org/10.1016/j.jmapro.2026.03.020openalex-snapshot
A novel mechanistic-analytical force model for slot milling based on the decomposition into cutting and ploughing actions
inferred← citeshttps://doi.org/10.1016/j.jmapro.2026.03.081openalex-snapshot
Implications for chip segmentation on milling force and vibration
inferred← citeshttps://doi.org/10.1016/j.jmatprotec.2024.118492openalex-snapshot
Extracting information from the cutting force signal to explain and exploit its discrepancy between up and down slot milling at the same chip thickness
inferred← citeshttps://doi.org/10.1016/j.mfglet.2024.09.078openalex-snapshot
Experimental validation of the amplitude ratio as a metric for milling stability identification
inferred← citeshttps://doi.org/10.1016/j.precisioneng.2018.11.007openalex-snapshot
Modelling of static and dynamic milling forces in inclined operations with circle-segment end mills
inferred← citeshttps://doi.org/10.1016/j.procir.2018.09.014openalex-snapshot
Limits to simplified calculation of uncut chip thickness in milling
inferred← citeshttps://doi.org/10.1016/j.procir.2020.05.050openalex-snapshot
Measurement and optimization of cutting forces during M200 TS milling process using the response surface methodology and dynamometer
inferred← citeshttps://doi.org/10.1016/j.promfg.2018.07.067openalex-snapshot
A comparative study on the cutting force coefficient identification between trochoidal and slot milling
inferred← citeshttps://doi.org/10.1016/j.promfg.2020.05.125openalex-snapshot
Digital force prediction for milling
inferred← citeshttps://doi.org/10.1016/j.promfg.2021.06.025openalex-snapshot
Propagation of Johnson-Cook flow stress model uncertainty to milling force uncertainty using finite element analysis and time domain simulation
inferred← citeshttps://doi.org/10.1016/j.ymssp.2025.112312openalex-snapshot
A physics-informed learning approach for milling stability analysis with deep subdomain adaptation network
inferred← citeshttps://doi.org/10.1051/matecconf/201822401075openalex-snapshot
Investigation of cutting force oscillations when high productivity milling
inferred← citeshttps://doi.org/10.1080/00207543.2023.2176698openalex-snapshot
Improved milling stability analysis for chatter-free machining parameters planning using a multi-fidelity surrogate model and transfer learning with limited experimental data
inferred← citeshttps://doi.org/10.1080/00207543.2024.2406998openalex-snapshot
Co-Kriging model-based multi-fidelity regression for refining milling stability predictions of variable tool overhang length using limited experimental data
inferred← citeshttps://doi.org/10.1080/10910344.2024.2381191openalex-snapshot
Multiobjective optimization of end milling parameters for enhanced machining performance on 42CrMo4 using machine learning and NSGA-III
inferred← citeshttps://doi.org/10.1088/1757-899x/709/2/022080openalex-snapshot
Cutting data effect on machine tool vibrational state and surface roughness when machining
inferred← citeshttps://doi.org/10.1109/lra.2021.3059634openalex-snapshot
An Active Steering Hand-Held Robotic System for Minimally Invasive Orthopaedic Surgery Using a Continuum Manipulator
inferred← citeshttps://doi.org/10.1115/1.4035422openalex-snapshot
Dynamics and Stability Prediction of Five-Axis Flat-End Milling
inferred← citeshttps://doi.org/10.1177/09544054221141130openalex-snapshot
Closed-form models for the cutting forces of general-helix cylindrical milling tools
inferred← citeshttps://doi.org/10.1177/09544089251390127openalex-snapshot
A robust mechanistic–metaheuristic hybrid approach for predicting milling force coefficients
inferred← citeshttps://doi.org/10.15587/1729-4061.2021.231779openalex-snapshot
Determining the width of a layer cut with saws with multidirectional teeth
inferred← citeshttps://doi.org/10.15587/2706-5448.2020.202793openalex-snapshot
Research of the milling process of a cylindrical surface by an oriented instrument
inferred← citeshttps://doi.org/10.17577/ijertv8is110020openalex-snapshot
Studies on Effect Process Parameters on Cutting Force and Surface Integrity in End Milling with Nano Fluids as Coolant
inferred← citeshttps://doi.org/10.17973/mmsj.2019_11_2019093openalex-snapshot
MODELLING AND OPTIMIZATION OF THE CUTTING FORCES DURING TI6AL4V MILLING PROCESS USING THE RESPONSE SURFACE METHODOLOGY AND DYNAMOMETER
inferred← citeshttps://doi.org/10.21062/mft.2021.033openalex-snapshot
Force and Temperature Conditions of Face Milling with Varying Chip Quotient as a Function of Angle of Rotation
inferred← citeshttps://doi.org/10.21272/jes.2023.10(2).a4openalex-snapshot
Cutting Forces Simulation for End Milling
inferred← citeshttps://doi.org/10.2139/ssrn.7162340openalex-snapshot
Milling Force Identification in Non/linear Time/Frequency Domains within the Framework of Closed-form Sinusoidal Expansion and Generalizable Parametric Groupings
inferred← citeshttps://doi.org/10.22190/fume210728071bopenalex-snapshot
PREDICTION OF RESPONSES IN A CNC MILLING OPERATION USING RANDOM FOREST REGRESSOR
inferred← citeshttps://doi.org/10.29109/gujsc.1090856openalex-snapshot
Parmak Frezelerde Kesme Kuvvetlerinin Modellenmesi
inferred← citeshttps://doi.org/10.30534/ijatcse/2020/218952020openalex-snapshot
Simulation In Classroom: Development Mini Computer Numerical Control (CNC) Milling Machine for G Code Movement
inferred← citeshttps://doi.org/10.31399/asm.hb.v18.a0006363openalex-snapshot
Fundamentals of Tribology in Machining
inferred← citeshttps://doi.org/10.3389/fmech.2024.1456050openalex-snapshot
Method for profile reconstruction of the workpiece surface during groove micromilling
inferred← citeshttps://doi.org/10.3390/app15031347openalex-snapshot
Recurrence Quantification Analysis (RQA) of Toroidal End Tool Milling Process
inferred← citeshttps://doi.org/10.3390/ma18153539openalex-snapshot
Cutting Force—Vibration Interactions in Precise—and Micromilling Processes: A Critical Review on Prediction Methods
inferred← citeshttps://doi.org/10.3390/sym18010074openalex-snapshot
Symmetry-Aware Simulation and Experimental Study of Thin-Wall AA7075 End Milling: From Tooth-Order Force Symmetry to Symmetry-Breaking Dynamic Response and Residual Stress
inferred← citeshttps://doi.org/10.35925/j.multi.2022.5.11openalex-snapshot
A homlokmarás kutatásának főbb eredményei : 1. rész: A forgácsolóerő vizsgálata
inferred← citeshttps://doi.org/10.46670/jsst.2022.31.1.57openalex-snapshot
Diagnosis of Cutting Stability of Portable Automatic Beveling Machine Using Spindle Motor Current
Editorial review for independent work. ICSAC — the Institute for Complexity Science and Advanced Computing — runs a structured editorial panel for researchers publishing outside journals, and publishes on CiteStamp rails. Submission is free and goes through ORCID: icsacinstitute.org/submit.