On the public citation graph
Correlation of microstructural evolution and formation of basal texture in a coarse grained Mg–Al alloy during hot rolling
0 signed · 113 inferred · view as graph
Inferred edges come from two machine sources: sweeps of open repository metadata (mostly SSRN and Zenodo), and a bulk OpenAlex citation snapshot. Every row below is labelled with the one it came from. Neither is a complete citation index — absence here is not evidence of absence.
Is this your work? Sign in with ORCID and put your name on the
claims that are yours.
Reference health. See whether every reference in this work resolves to a
known work and none has been retracted — and get a dated CiteStamped
badge you can embed.
What this work says
Outgoing claims: the papers this work cites, builds on, or argues with.
inferredcites →https://doi.org/10.1016/0001-6160(82)90031-1openalex-snapshot
Dynamic recrystallisation and the development of microstructure during the high temperature deformation of magnesium
inferredcites →https://doi.org/10.1016/0022-3115(65)90162-5openalex-snapshot
Physical metallurgy principles
inferredcites →https://doi.org/10.1016/j.scriptamat.2004.07.002openalex-snapshot
Microstructures and textures of pure magnesium deformed in plane-strain compression
inferredcites →https://doi.org/10.1016/s0254-0584(03)00168-8openalex-snapshot
Texture analysis in hexagonal materials
inferredcites →https://doi.org/10.1016/s0921-5093(02)00096-5openalex-snapshot
Dynamic continuous recrystallization characteristics in two stage deformation of Mg–3Al–1Zn alloy sheet
inferredcites →https://doi.org/10.1016/s0921-5093(04)00942-6openalex-snapshot
Deformation microstructures and textures of some cold rolled Mg alloys
inferredcites →https://doi.org/10.1016/s1359-6454(01)00020-9openalex-snapshot
Correlation of plastic deformation and dynamic recrystallization in magnesium alloy ZK60
inferredcites →https://doi.org/10.1016/s1359-6454(01)00297-xopenalex-snapshot
Application of texture simulation to understanding mechanical behavior of Mg and solid solution alloys containing Li or Y
inferredcites →https://doi.org/10.1016/s1359-6454(03)00005-3openalex-snapshot
The activity of non-basal slip systems and dynamic recovery at room temperature in fine-grained AZ31B magnesium alloys
What points at this work
Incoming claims: where this work appears in other papers’ reference lists and arguments.
inferred← citeshttps://doi.org/10.2139/ssrn.4676373openalex-extracted
Rare Earth Texture Evolution Induced by Non-Basal Slip During Hot Rolling of Mg-14gd-0.5zr (Wt.%) Alloy
inferred← citeshttps://doi.org/10.2139/ssrn.4764209openalex-extracted
Rare Earth Texture Evolution Induced by Non-Basal Slip During Traditional Hot Rolling of Mg-14gd-0.5zr (Wt.%) Alloy
inferred← citeshttps://doi.org/10.1002/9781118359228.ch57openalex-snapshot
Effect of Strain Rate on the Kinetics of Hot Deformation of AZ31 with Different Initial Texture
inferred← citeshttps://doi.org/10.1002/9781118658345.ch26openalex-snapshot
Effect of Initial Microstructure on the Microstructural Evolution and Joint Efficiency of a WE43 Alloy during Friction Stir Welding
inferred← citeshttps://doi.org/10.1002/adem.200800111openalex-snapshot
EBSD Study on Deformation Twinning in AZ31 Magnesium Alloy During Quasi‐in‐Situ Compression
inferred← citeshttps://doi.org/10.1002/adem.201701041openalex-snapshot
Improving the Ductility of Mg–Gd–Y–Zr Alloy through Extrusion and a Following Rolling
inferred← citeshttps://doi.org/10.1002/advs.202207535openalex-snapshot
Efficient Coarse‐Grained Superplasticity of a Gigapascal Lightweight Refractory Medium Entropy Alloy
inferred← citeshttps://doi.org/10.1007/978-3-319-48108-1_26openalex-snapshot
Effect of Initial Microstructure on the Microstructural Evolution and Joint Efficiency of a We43 Alloy During Friction Stir Welding
inferred← citeshttps://doi.org/10.1007/978-3-319-48203-3_57openalex-snapshot
Effect of Strain Rate on the Kinetics of Hot Deformation of AZ31 with Different Initial Texture
inferred← citeshttps://doi.org/10.1007/s00170-019-03321-0openalex-snapshot
Microstructural evolution and room temperature mechanical properties of AZ31 alloy processed through hot constrained compression
inferred← citeshttps://doi.org/10.1007/s10853-016-0371-0openalex-snapshot
A review on the effect of rare-earth elements on texture evolution during processing of magnesium alloys
inferred← citeshttps://doi.org/10.1007/s11661-011-0994-3openalex-snapshot
Texture Modification During Extrusion of Some Mg Alloys
inferred← citeshttps://doi.org/10.1007/s11661-014-2546-0openalex-snapshot
Texture Evolution and Twinning During the Expansion of Hot Extruded AZ31 + Sr Seamless Tubes
inferred← citeshttps://doi.org/10.1007/s11665-008-9315-4openalex-snapshot
Deformation Behavior of AZ31 Magnesium Alloy During Tension at Moderate Temperatures
inferred← citeshttps://doi.org/10.1007/s11665-019-04172-2openalex-snapshot
Effect of Anisotropy on Microstructures and Mechanical Properties of Rolled Ti/Al/Mg/Al/Ti Laminates
inferred← citeshttps://doi.org/10.1007/s11837-015-1755-3openalex-snapshot
Effect of Annealing on Microstructure and Tensile Properties of 5052/AZ31/5052 Clad Sheets
inferred← citeshttps://doi.org/10.1007/s11837-023-05786-7openalex-snapshot
Microstructural, Mechanical, Texture and Corrosion Properties of Severely Deformed AZ31 Alloy with Sr Addition
inferred← citeshttps://doi.org/10.1007/s12540-016-6125-3openalex-snapshot
Texture formation behaviors of Mg-9Al-1Zn alloy during high-temperature compression deformation
inferred← citeshttps://doi.org/10.1007/s13632-012-0044-6openalex-snapshot
Evolution of Microstructure and Texture During Uniaxial Compression of Cast AZ31Mg Alloy at Elevated Temperatures
inferred← citeshttps://doi.org/10.1007/s40195-017-0649-5openalex-snapshot
Improvement of Mechanical Properties of Magnesium Alloy ZK60 by Asymmetric Reduction Rolling
inferred← citeshttps://doi.org/10.1007/s40195-018-0732-6openalex-snapshot
Dynamic Recrystallization and Texture Evolution of GW94 Mg Alloy During Multi- and Unidirectional Impact Forging
inferred← citeshttps://doi.org/10.1016/j.actamat.2021.117151openalex-snapshot
Deformation mechanisms of Mg-Ca-Zn alloys studied by means of micropillar compression tests
inferred← citeshttps://doi.org/10.1016/j.bioactmat.2020.01.009openalex-snapshot
Influence of stamping on the biodegradation behavior of Mg–2Zn-0.5Nd (ZN20) sheet
inferred← citeshttps://doi.org/10.1016/j.jallcom.2008.04.093openalex-snapshot
Mechanical properties and texture evolution during rolling process of an AZ31 Mg alloy
inferred← citeshttps://doi.org/10.1016/j.jallcom.2009.01.046openalex-snapshot
Microstructural and textural evolution of AZ31 magnesium alloy during differential speed rolling
inferred← citeshttps://doi.org/10.1016/j.jallcom.2010.07.183openalex-snapshot
Microstructure and mechanical properties of Mg–Al–Mn–Ca alloy sheet produced by twin roll casting and sequential warm rolling
inferred← citeshttps://doi.org/10.1016/j.jallcom.2011.03.106openalex-snapshot
Twinning, grain orientation and texture variation of AZ31 Mg alloy during compression by EBSD tracing
inferred← citeshttps://doi.org/10.1016/j.jallcom.2014.03.070openalex-snapshot
An experimental study on the mechanism of texture evolution during hot-rolling process in a β titanium alloy
inferred← citeshttps://doi.org/10.1016/j.jallcom.2019.153477openalex-snapshot
Formation mechanism of the abnormal texture during extrusion in Mg-Y-Sm-Zn-Zr alloy
inferred← citeshttps://doi.org/10.1016/j.jallcom.2024.174737openalex-snapshot
Non-basal slip induced rare earth texture evolution in Mg-14Gd-0.5Zr (wt%) alloy during the traditional hot rolling
inferred← citeshttps://doi.org/10.1016/j.jallcom.2025.185932openalex-snapshot
Tensile properties at various temperatures of the extruded and aged Mg-9Y-xZn alloys with or without the abnormal C texture component
inferred← citeshttps://doi.org/10.1016/j.jma.2015.08.005openalex-snapshot
Microstructural evolution of Mg-7Al-2Sn Mg alloy during multi-directional impact forging
inferred← citeshttps://doi.org/10.1016/j.jmatprotec.2011.01.014openalex-snapshot
Influence of extrusion parameters on grain size and texture distributions of AZ31 alloy
inferred← citeshttps://doi.org/10.1016/j.jmrt.2022.02.015openalex-snapshot
Improvement of stretch formability and weakening the basal texture of Mg alloy by corrugated wide limit alignment and annealing process
inferred← citeshttps://doi.org/10.1016/j.jmrt.2022.11.041openalex-snapshot
Effect of Zn content and processing route on the microstructure, mechanical properties, and bio-degradation of Mg–Zn alloys
inferred← citeshttps://doi.org/10.1016/j.jmrt.2025.05.047openalex-snapshot
Research on improving the plastic deformation of Mg alloy plate using corrugated roller
inferred← citeshttps://doi.org/10.1016/j.jmst.2016.02.002openalex-snapshot
Effect of Texture on Biodegradable Behavior of an As-Extruded Mg–3%Al–1%Zn Alloy in Phosphate Buffer Saline Medium
inferred← citeshttps://doi.org/10.1016/j.jmst.2017.12.007openalex-snapshot
Grain refinement and orientation of AZ31B magnesium alloy in hot flow forming under different thickness reductions
inferred← citeshttps://doi.org/10.1016/j.jmst.2018.04.005openalex-snapshot
Role of pre-vertical compression in deformation behavior of Mg alloy AZ31B during super-high reduction hot rolling process
inferred← citeshttps://doi.org/10.1016/j.jmst.2019.06.008openalex-snapshot
Deformation and fracture mechanisms of an annealing-tailored “bimodal” grain-structured Mg alloy
inferred← citeshttps://doi.org/10.1016/j.jmst.2022.10.019openalex-snapshot
Solidification microstructure evolution and its correlations with mechanical properties and damping capacities of Mg-Al-based alloy fabricated using wire and arc additive manufacturing
inferred← citeshttps://doi.org/10.1016/j.jmst.2022.10.087openalex-snapshot
Relationship between the fatigue behavior and grain structures of an as-extruded Mg-6.2%Zn-0.6%Zr (in wt.%) alloy
inferred← citeshttps://doi.org/10.1016/j.matchar.2008.12.003openalex-snapshot
Texture and microstructure evolution in cold rolled AZ31 magnesium alloy
inferred← citeshttps://doi.org/10.1016/j.matchar.2011.05.006openalex-snapshot
Microstructure, mechanical properties and texture evolution of AZ31 alloy containing trace levels of strontium
inferred← citeshttps://doi.org/10.1016/j.matchar.2017.05.010openalex-snapshot
Enhanced mechanical property of AZ31B magnesium alloy processed by multi-directional forging method
inferred← citeshttps://doi.org/10.1016/j.matchar.2024.114363openalex-snapshot
Regulating precipitate characteristics in a rolled AZ80 alloy based on twinning and de-twinning deformation
inferred← citeshttps://doi.org/10.1016/j.matchar.2024.114446openalex-snapshot
Influence of different wrought processes on the microstructure and texture evolution in AZ31 magnesium alloy
inferred← citeshttps://doi.org/10.1016/j.matchemphys.2021.125121openalex-snapshot
Fabrication of phosphate conversion coatings on rolled AZ31 magnesium alloy: Variation of corrosion resistance on different planes induced by the crystallographic texture
inferred← citeshttps://doi.org/10.1016/j.matdes.2015.09.107openalex-snapshot
A comparison of microstructure and mechanical properties of Mg–9Al–1Zn sheets rolled from as-cast, cast-rolling and as-extruded alloys
inferred← citeshttps://doi.org/10.1016/j.matdes.2015.12.165openalex-snapshot
Evolution of microstructure, texture and mechanical properties of SiC/AZ31 nanocomposite during hot rolling process
inferred← citeshttps://doi.org/10.1016/j.matdes.2017.05.051openalex-snapshot
Microstructure and kinetics of intermetallic phase growth of three-layered A1050/AZ31/A1050 clads prepared by explosive welding combined with subsequent annealing
inferred← citeshttps://doi.org/10.1016/j.matlet.2008.05.045openalex-snapshot
Microstructure and mechanical properties of Mg–Al–Zn alloy sheet fabricated by cold extrusion
inferred← citeshttps://doi.org/10.1016/j.msea.2008.10.034openalex-snapshot
Analysis of fatigue damage process in magnesium alloy AZ31
inferred← citeshttps://doi.org/10.1016/j.msea.2009.11.047openalex-snapshot
Effects of hot rolling processing on microstructures and mechanical properties of Mg–3%Al–1%Zn alloy sheet
inferred← citeshttps://doi.org/10.1016/j.msea.2010.02.068openalex-snapshot
Microstructure characteristics during the multi-pass hot rolling and their effect on the mechanical properties of AM50 magnesium alloy sheet
inferred← citeshttps://doi.org/10.1016/j.msea.2010.09.052openalex-snapshot
Direct strip casting and hot rolling of an AZ31 magnesium alloy
inferred← citeshttps://doi.org/10.1016/j.msea.2010.10.053openalex-snapshot
Effect of magnesium carbonate on microstructure and rolling behaviors of AZ31 alloy
inferred← citeshttps://doi.org/10.1016/j.msea.2010.11.069openalex-snapshot
Effect of initial texture on dynamic recrystallization of AZ31 Mg alloy during hot rolling
inferred← citeshttps://doi.org/10.1016/j.msea.2011.06.060openalex-snapshot
Yield asymmetry and fracture behavior of Mg–3%Al–1%Zn–(0–1)%Sr alloys extruded at elevated temperatures
inferred← citeshttps://doi.org/10.1016/j.msea.2012.03.016openalex-snapshot
Tube extrusion of AZ31 alloy with Sr additions
inferred← citeshttps://doi.org/10.1016/j.msea.2013.07.011openalex-snapshot
Improved ductility of Mg–Zn–Ce alloy by hot pack-rolling
inferred← citeshttps://doi.org/10.1016/j.msea.2013.08.067openalex-snapshot
Effects of initial microstructure on the microstructural evolution and stretch formability of warm rolled Mg–3Al–1Zn alloy sheets
inferred← citeshttps://doi.org/10.1016/j.msea.2013.11.095openalex-snapshot
Modification of the grain structure, γ phase morphology and texture in AZ81 Mg alloy through accumulative back extrusion
inferred← citeshttps://doi.org/10.1016/j.msea.2014.09.060openalex-snapshot
Improvement of formability of Mg–3Al–1Zn alloy strip by electroplastic-differential speed rolling
inferred← citeshttps://doi.org/10.1016/j.msea.2015.08.032openalex-snapshot
Effects of hot ring rolling and aging treatment on microstructure and mechanical properties of AZ80-Ag alloy
inferred← citeshttps://doi.org/10.1016/j.msea.2015.12.070openalex-snapshot
Improving the room temperature stretch formability of a Mg alloy thin sheet by pre-twinning
inferred← citeshttps://doi.org/10.1016/j.msea.2017.02.107openalex-snapshot
Grain refinement and mechanical properties improvement of AZ31 Mg alloy sheet obtained by two - stage rolling
inferred← citeshttps://doi.org/10.1016/j.msea.2017.12.075openalex-snapshot
Microstructural modification and strength enhancement by SiC nanoparticles in AZ31 magnesium alloy during hot rolling
inferred← citeshttps://doi.org/10.1016/j.msea.2018.02.015openalex-snapshot
Role of pre-width reduction in deformation behavior of AZ31B alloy during break-down rolling and finish rolling
inferred← citeshttps://doi.org/10.1016/j.msea.2020.138996openalex-snapshot
Investigation of microstructures, textures, mechanical properties and fracture behaviors of a newly developed near α titanium alloy
inferred← citeshttps://doi.org/10.1016/j.msea.2021.142243openalex-snapshot
Effect of Mg on dynamic recrystallization of Zn–Mg alloys during room-temperature compression
inferred← citeshttps://doi.org/10.1016/j.msea.2023.144730openalex-snapshot
Achieving superior elevated-temperature strength of Mg-12Gd-3Y alloys by Nd addition
inferred← citeshttps://doi.org/10.1016/j.scriptamat.2008.02.013openalex-snapshot
The relationship between macro-fracture modes and roles of different deformation mechanisms for the as-extruded Mg–Zn–Zr alloy
inferred← citeshttps://doi.org/10.1016/j.scriptamat.2012.09.009openalex-snapshot
In situ identification of twin-related bands near yielding in a magnesium alloy
inferred← citeshttps://doi.org/10.1016/j.scriptamat.2013.08.006openalex-snapshot
Relationship between fatigue crack initiation and activated twins in as-extruded pure magnesium
inferred← citeshttps://doi.org/10.1016/j.scriptamat.2014.06.015openalex-snapshot
Effect of the crystallographic orientation and twinning on the corrosion resistance of an as-extruded Mg–3Al–1Zn (wt.%) bar
inferred← citeshttps://doi.org/10.1016/j.scriptamat.2019.05.029openalex-snapshot
Orientations of dynamically recrystallized grains nucleated at double twins in Mg-4Zn-1Sn alloy
inferred← citeshttps://doi.org/10.1016/j.scriptamat.2020.01.015openalex-snapshot
New Mg–Al based alloy sheet with good room-temperature stretch formability and tensile properties
inferred← citeshttps://doi.org/10.1016/s1003-6326(10)60067-2openalex-snapshot
Mechanical properties and texture evolution during hot rolling of AZ31 magnesium alloy
inferred← citeshttps://doi.org/10.1016/s1003-6326(10)60192-6openalex-snapshot
Warm deformation mechanism of hot-rolled Mg alloy
inferred← citeshttps://doi.org/10.1016/s1003-6326(10)60210-5openalex-snapshot
FEM analysis for hot rolling process of AM60 alloy
inferred← citeshttps://doi.org/10.1063/5.0033153openalex-snapshot
Texture evolution in nanocrystalline Ta under shock compression
inferred← citeshttps://doi.org/10.1080/14786435.2025.2449817openalex-snapshot
Study of the boundary migration of recrystallized grains under inhomogeneous deformation field by crystal plasticity – phase field simulation
inferred← citeshttps://doi.org/10.1115/1.4025976openalex-snapshot
Effect of Initial Texture on Rollability of Mg-3Al-1Zn Alloy Sheet
inferred← citeshttps://doi.org/10.11606/t.3.2013.tde-15082014-151305openalex-snapshot
Estudo do encruamento, recristalização e crescimento de grão em chapa da liga de magnésio AZ31B (Mg - 3%Al - 1%Zn - 0,3%Mn).
inferred← citeshttps://doi.org/10.1179/1743284711y.0000000080openalex-snapshot
Influence of strain rate on hot deformation behaviour and texture evolution of AZ31B
inferred← citeshttps://doi.org/10.12677/ms.2016.65038openalex-snapshot
Microstructure and Texture Evolution of Mg-Gd-Y-Nd-Zr Alloy Hot Deformation
inferred← citeshttps://doi.org/10.12794/metadc849628openalex-snapshot
Thermomechanical Processing, Additive Manufacturing and Alloy Design of High Strength Mg Alloys
inferred← citeshttps://doi.org/10.1557/jmr.2014.358openalex-snapshot
twins in the rolled Mg–Zn–Ca alloy with high formability
inferred← citeshttps://doi.org/10.1557/s43580-022-00316-0openalex-snapshot
The effect of strain rate on the texture formation behavior of AZ80 magnesium during high-temperature deformation
inferred← citeshttps://doi.org/10.2320/matertrans.h-m2012832openalex-snapshot
Deformation Behavior and Texture Formation in AZ80 Magnesium Alloy during Uniaxial Compression Deformation at High Temperatures
inferred← citeshttps://doi.org/10.2320/matertrans.l-m2012828openalex-snapshot
Texture Evolution in AZ80 Magnesium Alloy by the Plane Strain Compression Deformation at High Temperature
inferred← citeshttps://doi.org/10.2320/matertrans.l-mra2008820openalex-snapshot
Rolling Texture Evolution of AZ31 Magnesium Alloy Sheets by Isothermal Eccentric-Rolls Drawing
inferred← citeshttps://doi.org/10.2320/matertrans.m2011092openalex-snapshot
Dynamic Electropulsing Induced Evolution of Basal Texture and Its Effect on Properties of Magnesium Alloy AZ61
inferred← citeshttps://doi.org/10.2320/matertrans.mc200730openalex-snapshot
The Influence of Developed Texture on the Mechanical Anisotropy and Deformation Modes of an As-Extruded Mg-Zn-Zr Alloy
inferred← citeshttps://doi.org/10.2464/jilm.59.498openalex-snapshot
Rolling texture evolution of AZ31 magnesium alloy sheets by isothermal eccentric-rolls drawing
inferred← citeshttps://doi.org/10.2464/jilm.62.54openalex-snapshot
Texture evolution in AZ80 magnesium alloy by the plane strain compression deformation at high temperature
inferred← citeshttps://doi.org/10.3139/146.110463openalex-snapshot
Texture and mechanical properties of strip cast and hot rolled magnesium AZ31
inferred← citeshttps://doi.org/10.3390/ma11081401openalex-snapshot
Enhanced Stretch Formability of AZ31 Magnesium Alloy Thin Sheet by Induced Precompression and Sequent Annealing
inferred← citeshttps://doi.org/10.3390/ma16041399openalex-snapshot
Effect of Recrystallization Behavior of AZ31 Magnesium Alloy on Damping Capacity
inferred← citeshttps://doi.org/10.3390/ma16237318openalex-snapshot
Research Progress on the Damping Mechanism of Magnesium Alloys
inferred← citeshttps://doi.org/10.3724/sp.j.1037.2010.01458openalex-snapshot
RESEARCH PROGRESS ON PLASTIC DEFORMATION MECHANISM OF Mg ALLOYS
inferred← citeshttps://doi.org/10.4150/kpmi.2011.18.2.168openalex-snapshot
Grain Growth and Texture Evolution of Mg: Phase Field Modeling
inferred← citeshttps://doi.org/10.48550/arxiv.2107.00878openalex-snapshot
Deformation mechanisms of Mg-Ca-Zn alloys studied by means of micropillar compression tests
Editorial review for independent work. ICSAC — the Institute for Complexity
Science and Advanced Computing — runs a structured editorial panel for researchers
publishing outside journals, and publishes on CiteStamp rails. Submission is free
and goes through ORCID: icsacinstitute.org/submit.