On the public citation graph

Defect‐based multiaxial fatigue life prediction of L‐PBF additive manufactured metals

https://doi.org/10.1111/ffe.13449
0 signed · 87 inferred · view as graph

Inferred edges come from two machine sources: sweeps of open repository metadata (mostly SSRN and Zenodo), and a bulk OpenAlex citation snapshot. Every row below is labelled with the one it came from. Neither is a complete citation index — absence here is not evidence of absence.

Is this your work? Sign in with ORCID and put your name on the claims that are yours.
Claim with ORCID
Reference health. See whether every reference in this work resolves to a known work and none has been retracted — and get a dated CiteStamped badge you can embed.
See reference health

What this work says

Outgoing claims: the papers this work cites, builds on, or argues with.

inferredcites →https://doi.org/10.1007/s10704-005-1088-2openalex-snapshot
A Review of Critical Plane Orientations in Multiaxial Fatigue Failure Criteria of Metallic Materials
inferredcites →https://doi.org/10.1016/0025-5416(88)90547-2openalex-snapshot
Mechanisms of fatigue crack propagation in metals, ceramics and composites: Role of crack tip shielding
inferredcites →https://doi.org/10.1016/j.engfracmech.2007.07.004openalex-snapshot
A material and environment-dependent criterion for the prediction of fatigue crack paths in metallic structures
inferredcites →https://doi.org/10.1016/j.engfracmech.2014.04.010openalex-snapshot
Fatigue crack growth behaviour of tubular aluminium specimens with a circular hole under axial and torsion loadings
inferredcites →https://doi.org/10.1016/j.engfracmech.2017.11.002openalex-snapshot
Fatigue properties of AlSi10Mg obtained by additive manufacturing: Defect-based modelling and prediction of fatigue strength
inferredcites →https://doi.org/10.1016/j.engfracmech.2021.107541openalex-snapshot
Defect-based fatigue life prediction of L-PBF additive manufactured metals
inferredcites →https://doi.org/10.1016/j.ijfatigue.2005.08.001openalex-snapshot
Fatigue crack propagation from a hole in tubular specimens under axial and torsional loading
inferredcites →https://doi.org/10.1016/j.ijfatigue.2013.02.002openalex-snapshot
Small fatigue crack growth under multiaxial stresses
inferredcites →https://doi.org/10.1016/j.ijfatigue.2013.04.001openalex-snapshot
Review of fatigue crack growth under non-proportional mixed-mode loading
inferredcites →https://doi.org/10.1016/j.ijfatigue.2016.01.023openalex-snapshot
Friction and roughness induced closure effects on shear-mode crack growth and branching mechanisms
inferredcites →https://doi.org/10.1016/j.ijfatigue.2017.03.044openalex-snapshot
Multiaxial fatigue behavior of wrought and additive manufactured Ti-6Al-4V including surface finish effect
inferredcites →https://doi.org/10.1016/j.ijfatigue.2018.07.019openalex-snapshot
Representing crack growth in additively manufactured Ti-6Al-4V
inferredcites →https://doi.org/10.1016/j.ijfatigue.2018.07.020openalex-snapshot
Influence of defects, surface roughness and HIP on the fatigue strength of Ti-6Al-4V manufactured by additive manufacturing
inferredcites →https://doi.org/10.1016/j.ijfatigue.2018.07.035openalex-snapshot
Significance of hot isostatic pressing (HIP) on multiaxial deformation and fatigue behaviors of additive manufactured Ti-6Al-4V including build orientation and surface roughness effects
inferredcites →https://doi.org/10.1016/j.ijfatigue.2019.02.015openalex-snapshot
Fatigue crack growth behavior of additively manufactured 17-4 PH stainless steel: Effects of build orientation and microstructure
inferredcites →https://doi.org/10.1016/j.ijfatigue.2019.03.007openalex-snapshot
Crack paths in additive manufactured metallic materials subjected to multiaxial cyclic loads including surface roughness, HIP, and notch effects
inferredcites →https://doi.org/10.1016/j.ijfatigue.2019.105363openalex-snapshot
Fatigue of additive manufactured Ti-6Al-4V, Part II: The relationship between microstructure, material cyclic properties, and component performance
inferredcites →https://doi.org/10.1016/j.ijfatigue.2020.105479openalex-snapshot
Multiaxial fatigue of additive manufactured metals: Performance, analysis, and applications
inferredcites →https://doi.org/10.1016/j.ijfatigue.2020.106002openalex-snapshot
Fatigue performance of additive manufactured metals under variable amplitude service loading conditions including multiaxial stresses and notch effects: Experiments and modelling
inferredcites →https://doi.org/10.1016/j.matdes.2015.07.147openalex-snapshot
Influence of defects on mechanical properties of Ti–6Al–4V components produced by selective laser melting and electron beam melting
inferredcites →https://doi.org/10.1016/j.matdes.2017.05.091openalex-snapshot
Qualification of AM parts: Extreme value statistics applied to tomographic measurements
inferredcites →https://doi.org/10.1016/j.matdes.2019.108091openalex-snapshot
Defect characteristics and analysis of their variability in metal L-PBF additive manufacturing
inferredcites →https://doi.org/10.1016/j.msea.2020.139385openalex-snapshot
Analysis of the effect of internal defects on fatigue performance of additive manufactured metals
inferredcites →https://doi.org/10.1016/j.pmatsci.2020.100724openalex-snapshot
Defects in additive manufactured metals and their effect on fatigue performance: A state-of-the-art review
inferredcites →https://doi.org/10.1016/j.tafmec.2019.102260openalex-snapshot
Surface roughness effect on multiaxial fatigue behavior of additive manufactured metals and its modeling
inferredcites →https://doi.org/10.1016/j.tafmec.2020.102638openalex-snapshot
Analysis of the effect of surface roughness on fatigue performance of powder bed fusion additive manufactured metals
inferredcites →https://doi.org/10.1016/s0013-7944(00)00046-1openalex-snapshot
Mixed-mode, high-cycle fatigue-crack growth thresholds in Ti–6Al–4V
inferredcites →https://doi.org/10.1016/s0142-1123(96)00064-3openalex-snapshot
A comparative study of multiaxial high-cycle fatigue criteria for metals
inferredcites →https://doi.org/10.1038/s41598-017-06504-5openalex-snapshot
The Influence of Porosity on Fatigue Crack Initiation in Additively Manufactured Titanium Components
inferredcites →https://doi.org/10.1111/ffe.12131openalex-snapshot
Near‐threshold behaviour of shear‐mode fatigue cracks in metallic materials
inferredcites →https://doi.org/10.1111/ffe.13000openalex-snapshot
Fatigue behaviour of additive manufactured materials: An overview of some recent experimental studies on Ti‐6Al‐4V considering various processing and loading direction effects
inferredcites →https://doi.org/10.1111/j.1460-2695.1982.tb01220.xopenalex-snapshot
MIXED‐MODE FATIGUE THRESHOLDS
inferredcites →https://doi.org/10.1111/j.1460-2695.1988.tb01169.xopenalex-snapshot
A CRITICAL PLANE APPROACH TO MULTIAXIAL FATIGUE DAMAGE INCLUDING OUT‐OF‐PHASE LOADING
inferredcites →https://doi.org/10.1115/1.3225026openalex-snapshot
Metal Fatigue in Engineering (1980)
inferredcites →https://doi.org/10.1155/2014/451387openalex-snapshot
Tribological behavior of Ti-6Al-4V and Ti-6Al-7Nb Alloys for Total Hip Prosthesis
inferredcites →https://doi.org/10.1179/1743284715y.0000000053openalex-snapshot
Effect of surface roughness on fatigue performance of additive manufactured Ti–6Al–4V
inferredcites →https://doi.org/10.1520/stp24164sopenalex-snapshot
Small Crack Growth in Multiaxial Fatigue
inferredcites →https://doi.org/10.3390/aerospace5040118openalex-snapshot
Crack Growth in a Range of Additively Manufactured Aerospace Structural Materials

What points at this work

Incoming claims: where this work appears in other papers’ reference lists and arguments.

inferred← citeshttps://doi.org/10.2139/ssrn.4677761openalex-extracted
Multiaxial Fatigue Rule Applied to a Plate Subjected to an Equibiaxial Stress State
inferred← citeshttps://doi.org/10.1007/s10338-023-00380-5openalex-snapshot
Modeling and Prediction of Fatigue Properties of Additively Manufactured Metals
inferred← citeshttps://doi.org/10.1016/j.addlet.2021.100020openalex-snapshot
Describing crack growth in additively manufactured Scalmalloy
inferred← citeshttps://doi.org/10.1016/j.addlet.2022.100026openalex-snapshot
Observations on comparable aluminium alloy crack growth curves: Additively manufactured Scalmalloy® as an alternative to AA5754 and AA6061-T6 alloys?
inferred← citeshttps://doi.org/10.1016/j.addlet.2022.100043openalex-snapshot
Crack growth in conventionally manufactured pure nickel, titanium and aluminum and the cold spray additively manufactured equivalents
inferred← citeshttps://doi.org/10.1016/j.engfracmech.2021.107541openalex-snapshot
Defect-based fatigue life prediction of L-PBF additive manufactured metals
inferred← citeshttps://doi.org/10.1016/j.engfracmech.2021.107876openalex-snapshot
Characterising and representing small crack growth in an additive manufactured titanium alloy
inferred← citeshttps://doi.org/10.1016/j.engfracmech.2024.110437openalex-snapshot
Determination of equivalent crack length for voids in metallic alloys based on continuum damage mechanics modeling
inferred← citeshttps://doi.org/10.1016/j.engfracmech.2025.111368openalex-snapshot
Fracture and notch mechanics to estimate the uniaxial fatigue limit of plain and severely notched L-PBF AlSi10Mg specimens
inferred← citeshttps://doi.org/10.1016/j.engfracmech.2026.112081openalex-snapshot
Multiple surface crack growth and coalescence in additively manufactured 316 l stainless steel: Experimental and modelling study
inferred← citeshttps://doi.org/10.1016/j.ijfatigue.2021.106648openalex-snapshot
Notched fatigue of additive manufactured metals under axial and multiaxial loadings, part II: Data correlations and life estimations
inferred← citeshttps://doi.org/10.1016/j.ijfatigue.2021.106674openalex-snapshot
Fatigue lifetime assessment of AM metallic components according to a strain-based criterion
inferred← citeshttps://doi.org/10.1016/j.ijfatigue.2023.107979openalex-snapshot
Multiaxial fatigue life predictions of additively manufactured metals using a hybrid of linear elastic fracture mechanics and a critical plane approach
inferred← citeshttps://doi.org/10.1016/j.ijfatigue.2023.108120openalex-snapshot
Modelling of the surface morphology and size effects on fatigue strength of L-PBF Inconel 718 by comparing different testing specimens
inferred← citeshttps://doi.org/10.1016/j.ijfatigue.2024.108241openalex-snapshot
Multiaxial low cycle fatigue behavior and life prediction of wire arc additive manufactured 308L stainless steel
inferred← citeshttps://doi.org/10.1016/j.ijfatigue.2024.108258openalex-snapshot
Mixed-Mode small fatigue crack growth rates and modeling in additively manufactured metals
inferred← citeshttps://doi.org/10.1016/j.ijfatigue.2025.109199openalex-snapshot
A defect-based critical plane method for multiaxial high cycle fatigue life prediction in L-PBF Ti-6Al-4V alloy
inferred← citeshttps://doi.org/10.1016/j.ijfatigue.2026.109528openalex-snapshot
Defect-based multiaxial fatigue life assessment of 3D-printed bulk metallic glasses
inferred← citeshttps://doi.org/10.1016/j.ijfatigue.2026.109815openalex-snapshot
Failure mechanism transition in torsional fatigue: experimental observations and small crack growth modeling
inferred← citeshttps://doi.org/10.1016/j.ijfatigue.2026.110004openalex-snapshot
A damage-driven fatigue life prediction framework integrating critical defects and cyclic hardening for cast TiAl alloys
inferred← citeshttps://doi.org/10.1016/j.matdes.2025.115150openalex-snapshot
Mechanical and fatigue properties of laser additive manufactured Hastelloy X – A Concise review
inferred← citeshttps://doi.org/10.1016/j.msea.2024.146658openalex-snapshot
Fatigue prediction through quantification of critical defects and crack growth behaviour in additively manufactured Ti-6Al-4V alloy
inferred← citeshttps://doi.org/10.1016/j.msea.2025.148156openalex-snapshot
Identifying micron-scale fatigue crack initiation by correlating temporal dynamic compliance with Computed Tomography
inferred← citeshttps://doi.org/10.1016/j.msea.2026.149985openalex-snapshot
Multiaxial fatigue behavior and fatigue life prediction model of additive manufacturing TA15 alloy with artificial defect
inferred← citeshttps://doi.org/10.1016/j.pmatsci.2023.101126openalex-snapshot
Multiaxial fatigue of additively manufactured metallic components: A review of the failure mechanisms and fatigue life prediction methodologies
inferred← citeshttps://doi.org/10.1016/j.tafmec.2024.104281openalex-snapshot
Laser shock peening and its effects and modeling on fatigue performance of additive manufactured metallic materials
inferred← citeshttps://doi.org/10.1016/j.tafmec.2025.104918openalex-snapshot
Prediction model of S-N curve under mean stress without fatigue test or with a minimum number of fatigue tests
inferred← citeshttps://doi.org/10.1080/17452759.2024.2302556openalex-snapshot
Fatigue performance of metal additive manufacturing: a comprehensive overview
inferred← citeshttps://doi.org/10.1111/ffe.13725openalex-snapshot
Study on small crack growth behavior of laser powder bed fused Ti6Al4V alloy
inferred← citeshttps://doi.org/10.1111/ffe.13818openalex-snapshot
Virtual special issue: Fatigue and fracture of additively manufactured materials
inferred← citeshttps://doi.org/10.1111/ffe.13822openalex-snapshot
Multiaxial fatigue evaluation of type 316L stainless steel based on critical plane and energy dissipation
inferred← citeshttps://doi.org/10.1111/ffe.13900openalex-snapshot
Parameter estimation in multiaxial fatigue short crack growth model using hierarchical Bayesian linear regression
inferred← citeshttps://doi.org/10.1111/ffe.13967openalex-snapshot
An overview of factors affecting high‐cycle fatigue of additive manufacturing metals
inferred← citeshttps://doi.org/10.1111/ffe.13985openalex-snapshot
High‐cycle and very‐high‐cycle fatigue behavior at two stress ratios of Ti‐6Al‐4V manufactured via laser powder bed fusion with different surface states
inferred← citeshttps://doi.org/10.1111/ffe.14055openalex-snapshot
Effects of loading frequency on fatigue behavior of metallic materials—A literature review
inferred← citeshttps://doi.org/10.1111/ffe.14152openalex-snapshot
Recent developments and future trends in fatigue life assessment of additively manufactured metals with particular emphasis on machine learning modeling
inferred← citeshttps://doi.org/10.1111/ffe.14402openalex-snapshot
Multiaxial fatigue rule applied to disc specimens with variable thickness subjected to an equibiaxial stress state
inferred← citeshttps://doi.org/10.1111/ffe.14468openalex-snapshot
On the Growth of Small Cracks in 2024‐T3 and Boeing Space, Intelligence and Weapon Systems AM LPBF Scalmalloy®
inferred← citeshttps://doi.org/10.1177/10567895261459757openalex-snapshot
Anisotropic fatigue life prediction of laser powder bed fusion Ti6Al4V alloy based on continuous damage model
inferred← citeshttps://doi.org/10.2139/ssrn.6616217openalex-snapshot
Effect of residual stresses and internal defects on fatigue of Ti6Al4V pieces manufactured by SLM and surface treated
inferred← citeshttps://doi.org/10.22541/au.169328886.64998430/v1openalex-snapshot
A deep learning and physics-based method for multiaxial fatigue life prediction
inferred← citeshttps://doi.org/10.3390/cryst15060544openalex-snapshot
Further Studies into the Growth of Small Naturally Occurring Three-Dimensional Cracks in Additively Manufactured and Conventionally Built Materials
inferred← citeshttps://doi.org/10.3390/engproc2026131024openalex-snapshot
Multiaxial Static and Fatigue Strength of LPBF-Manufactured AlSi10Mg in as-Built and T6 Conditions
inferred← citeshttps://doi.org/10.3390/ma17112656openalex-snapshot
Durability Analysis of Cold Spray Repairs: Phase I—Effect of Surface Grit Blasting
inferred← citeshttps://doi.org/10.3390/ma18143332openalex-snapshot
Atomistic-Based Fatigue Property Normalization Through Maximum A Posteriori Optimization in Additive Manufacturing
inferred← citeshttps://doi.org/10.3390/ma18245678openalex-snapshot
Study on Fatigue Behavior and Life Prediction of Laser Powder Bed Fused Ti6Al4V Alloy at 400 °C
inferred← citeshttps://doi.org/10.3390/met12071121openalex-snapshot
A Numerical Study into the Effect of Machining on the Interaction between Surface Roughness and Surface Breaking Defects on the Durability of WAAM Ti-6Al-4V Parts
inferred← citeshttps://doi.org/10.3390/met14050523openalex-snapshot
On the Link between Plastic Wake Induced Crack Closure and the Fatigue Threshold
inferred← citeshttps://doi.org/10.3390/met14070770openalex-snapshot
Experimental Studies on the Anisotropic Fatigue Behaviour of IN718 Fabricated via Wire Arc Additive Manufacturing
Editorial review for independent work. ICSAC — the Institute for Complexity Science and Advanced Computing — runs a structured editorial panel for researchers publishing outside journals, and publishes on CiteStamp rails. Submission is free and goes through ORCID: icsacinstitute.org/submit.