On the public citation graph

High-Quality Machining of Edges of Thin-Walled Plates by Tilt Side Milling Based on an Analytical Force-Based Model

0 signed · 53 inferred · view as graph

Inferred edges come from two machine sources: sweeps of open repository metadata (mostly SSRN and Zenodo), and a bulk OpenAlex citation snapshot. Every row below is labelled with the one it came from. Neither is a complete citation index — absence here is not evidence of absence.

Is this your work? Sign in with ORCID and put your name on the claims that are yours.
Claim with ORCID
Reference health. See whether every reference in this work resolves to a known work and none has been retracted — and get a dated CiteStamped badge you can embed.
See reference health

What this work says

Outgoing claims: the papers this work cites, builds on, or argues with.

inferredcites →https://doi.org/10.1007/s00170-007-1317-0openalex-snapshot
Variable feed rates and variable machine forces for a constant material removal rate and constant cutting force along Pythagorean-hodograph curves
inferredcites →https://doi.org/10.1007/s00170-014-6221-9openalex-snapshot
Five-axis tool path and feed rate optimization based on the cutting force–area quotient potential field
inferredcites →https://doi.org/10.1007/s00170-015-7239-3openalex-snapshot
Milling vibration attenuation by eddy current damping
inferredcites →https://doi.org/10.1007/s11740-008-0123-3openalex-snapshot
Development and design of an active work piece holder driven by piezo actuators
inferredcites →https://doi.org/10.1016/j.cirp.2008.03.048openalex-snapshot
Identification of dynamic cutting force coefficients and chatter stability with process damping
inferredcites →https://doi.org/10.1016/j.cirp.2013.03.136openalex-snapshot
A solution for minimising vibrations in milling of thin walled casings by applying dampers to workpiece surface
inferredcites →https://doi.org/10.1016/j.cirp.2015.04.106openalex-snapshot
Active suppression of structural chatter vibrations using machine drives and accelerometers
inferredcites →https://doi.org/10.1016/j.cirp.2016.04.041openalex-snapshot
Design of irregular pitch end mills to attain robust suppression of regenerative chatter
inferredcites →https://doi.org/10.1016/j.cirp.2016.06.004openalex-snapshot
Chatter suppression techniques in metal cutting
inferredcites →https://doi.org/10.1016/j.cja.2018.12.002openalex-snapshot
Design of a tunable mass damper for mitigating vibrations in milling of cylindrical parts
inferredcites →https://doi.org/10.1016/j.compeleceng.2015.09.016openalex-snapshot
Investigation of milling cutting forces and cutting coefficient for aluminum 6060-T6
inferredcites →https://doi.org/10.1016/j.ijmachtools.2010.09.001openalex-snapshot
Chatter suppression in fast tool servo-assisted turning by spindle speed variation
inferredcites →https://doi.org/10.1016/j.ijmachtools.2010.09.007openalex-snapshot
Stable islands in the stability chart of milling processes due to unequal tooth pitch
inferredcites →https://doi.org/10.1016/j.ijmachtools.2010.10.004openalex-snapshot
Optimisation of variable helix tool geometry for regenerative chatter mitigation
inferredcites →https://doi.org/10.1016/j.ijmachtools.2013.09.008openalex-snapshot
Investigation of influence of fixture layout on dynamic response of thin-wall multi-framed work-piece in machining
inferredcites →https://doi.org/10.1016/j.ijmachtools.2014.05.004openalex-snapshot
A novel magnetic actuator design for active damping of machining tools
inferredcites →https://doi.org/10.1016/j.ijmachtools.2014.05.007openalex-snapshot
Novel ancillary device for minimising machining vibrations in thin wall assemblies
inferredcites →https://doi.org/10.1016/j.ijmachtools.2017.04.001openalex-snapshot
Modeling of the instantaneous milling force per tooth with tool run-out effect in high speed ball-end milling
inferredcites →https://doi.org/10.1016/j.ijmachtools.2017.10.002openalex-snapshot
Stiffness variation method for milling chatter suppression via piezoelectric stack actuators
inferredcites →https://doi.org/10.1016/j.ijmecsci.2018.10.009openalex-snapshot
Efficient prediction of varying dynamic characteristics in thin-wall milling using freedom and mode reduction methods
inferredcites →https://doi.org/10.1016/j.ijnonlinmec.2017.02.014openalex-snapshot
Chatter mitigation using the nonlinear tuned vibration absorber
inferredcites →https://doi.org/10.1016/j.jmapro.2013.08.005openalex-snapshot
Robust prediction of chatter stability in milling based on the analytical chatter stability
inferredcites →https://doi.org/10.1016/j.jmatprotec.2008.06.029openalex-snapshot
Study on deformation of titanium thin-walled part in milling process
inferredcites →https://doi.org/10.1016/j.jmatprotec.2018.08.042openalex-snapshot
On improving chatter stability of thin-wall milling by prestressing
inferredcites →https://doi.org/10.1016/j.jsv.2008.03.045openalex-snapshot
Analytical prediction of chatter stability for variable pitch and variable helix milling tools
inferredcites →https://doi.org/10.1016/j.precisioneng.2016.09.021openalex-snapshot
Modeling dynamics and stability of variable pitch and helix milling tools for development of a design method to maximize chatter stability
inferredcites →https://doi.org/10.1016/j.procir.2013.06.094openalex-snapshot
Reduction of Flexible Workpiece Vibrations with Dynamic Support Realized as Tuned Mass Damper
inferredcites →https://doi.org/10.1016/j.procir.2016.04.073openalex-snapshot
Investigating Actuation Strategies in Active Fixtures for Chatter Suppression
inferredcites →https://doi.org/10.1016/s0007-8506(07)60704-5openalex-snapshot
Creating Stability Lobe Diagrams during Milling
inferredcites →https://doi.org/10.1016/s0890-6955(03)00126-3openalex-snapshot
Programming spindle speed variation for machine tool chatter suppression
inferredcites →https://doi.org/10.1098/rsta.2000.0754openalex-snapshot
Chatter control and stability analysis of a cantilever boring bar under regenerative cutting conditions
inferredcites →https://doi.org/10.1115/1.4038371openalex-snapshot
General Modeling and Calibration Method for Cutting Force Prediction With Flat-End Cutter
inferredcites →https://doi.org/10.1115/1.4038499openalex-snapshot
Cutting Force Simulation in Minute Time Resolution for Ball End Milling Under Various Tool Posture
inferredcites →https://doi.org/10.1115/1.4040087openalex-snapshot
Analytical Modeling and Experimental Validation of Cutting Forces Considering Edge Effects and Size Effects With Round Chamfered Ceramic Tools
inferredcites →https://doi.org/10.1115/1.4040618openalex-snapshot
Robust Active Chatter Control in Milling Processes With Variable Pitch Cutters
inferredcites →https://doi.org/10.1115/1.4040726openalex-snapshot
Dynamics and Stability of Turn-Milling Operations With Varying Time Delay in Discrete Time Domain
inferredcites →https://doi.org/10.1115/1.4040872openalex-snapshot
Tool Orientation Planning in Milling With Process Dynamic Constraints: A Minimax Optimization Approach
inferredcites →https://doi.org/10.1115/1.4041248openalex-snapshot
Online Chatter Suppression in Turning by Adaptive Amplitude Modulation of Spindle Speed Variation
inferredcites →https://doi.org/10.1115/1.4041250openalex-snapshot
Patterns of Regenerative Milling Chatter Under Joint Influences of Cutting Parameters, Tool Geometries, and Runout
inferredcites →https://doi.org/10.1115/imece2005-82687openalex-snapshot
Particle Dampers for Workpiece Chatter Mitigation
inferredcites →https://doi.org/10.1177/1077546307078754openalex-snapshot
Dynamics and Stability of Variable-pitch Milling

What points at this work

Incoming claims: where this work appears in other papers’ reference lists and arguments.

inferred← citeshttps://doi.org/10.2139/ssrn.4674226openalex-extracted
inferred← citeshttps://doi.org/10.1007/s00170-024-13914-zopenalex-snapshot
Modeling the shape profile of the machining side trimmed by abrasive water jet
inferred← citeshttps://doi.org/10.1016/j.cirpj.2025.05.013openalex-snapshot
Effect of workpiece vibration on dynamic cutting force in thin-walled plates trimming
inferred← citeshttps://doi.org/10.1016/j.cja.2023.02.015openalex-snapshot
Burr formation mechanism and morphological transformation critical conditions in grinding of nickel-based superalloy honeycomb cores
inferred← citeshttps://doi.org/10.1016/j.ijmecsci.2022.107651openalex-snapshot
Effect of state-dependent time delay on dynamics of trimming of thin-walled structures
inferred← citeshttps://doi.org/10.1016/j.ijmecsci.2024.109159openalex-snapshot
Bifurcation analysis of thin-walled structures trimming process with state-dependent time delay
inferred← citeshttps://doi.org/10.1016/j.jmatprotec.2019.116499openalex-snapshot
Suppressing vibrations in milling-trimming process of the plate-like workpiece by optimizing the location of vibration absorber
inferred← citeshttps://doi.org/10.1016/j.procir.2023.03.027openalex-snapshot
Modeling of dynamic cutting forces in thin-walled structures trimming
inferred← citeshttps://doi.org/10.1016/j.ymssp.2021.108727openalex-snapshot
Towards high milling accuracy of turbine blades: A review
inferred← citeshttps://doi.org/10.1115/1.4050464openalex-snapshot
Milling Force Prediction Model for Five-Axis Machining of Freeform Surface Considering Mesoscopic Size Effect
inferred← citeshttps://doi.org/10.1115/1.4051008openalex-snapshot
Rigidity Regulation Approach for Geometric Tolerance Optimization in End Milling of Thin-Walled Components
inferred← citeshttps://doi.org/10.62051/48zgrf09openalex-snapshot
Construction and Analysis of Cutting Force and Stability Prediction Model in CNC Milling Thin-Walled Parts Machining
Editorial review for independent work. ICSAC — the Institute for Complexity Science and Advanced Computing — runs a structured editorial panel for researchers publishing outside journals, and publishes on CiteStamp rails. Submission is free and goes through ORCID: icsacinstitute.org/submit.