On the public citation graph

Comparison of Anisotropic Yield Functions and Calibrations for Accurate Thickness Prediction of Hole Expansion Test

https://doi.org/10.2139/ssrn.4429191
0 signed · 46 inferred · view as graph

Inferred edges come from two machine sources: sweeps of open repository metadata (mostly SSRN and Zenodo), and a bulk OpenAlex citation snapshot. Every row below is labelled with the one it came from. Neither is a complete citation index — absence here is not evidence of absence.

Is this your work? Sign in with ORCID and put your name on the claims that are yours.
Claim with ORCID
Reference health. See whether every reference in this work resolves to a known work and none has been retracted — and get a dated CiteStamped badge you can embed.
See reference health

What this work says

Outgoing claims: the papers this work cites, builds on, or argues with.

inferredcites →https://doi.org/10.1007/s11340-015-9999-yopenalex-extracted
Cruciform Specimen Design and Verification for Constitutive Identification of Anisotropic Sheets
inferredcites →https://doi.org/10.1007/s12540-022-01201-zopenalex-extracted
Hole Expansion Characteristics of W-Tempered 7075 Aluminum Alloy Sheet in Comparison with Peak Aged T6 Tempered Alloy Sheet
inferredcites →https://doi.org/10.1007/s12540-022-01268-8openalex-extracted
Investigation of Elastic Modulus Degradation and Recovery with Time and Baking Process for Deformed Automotive Steel Sheets
inferredcites →https://doi.org/10.1016/0020-7403(80)90011-9openalex-extracted
Upper-bound anisotropic yield locus calculations assuming 〈111〉-pencil glide
inferredcites →https://doi.org/10.1016/0749-6419(89)90019-3openalex-extracted
Plastic behavior and stretchability of sheet metals. Part I: A yield function for orthotropic sheets under plane stress conditions
inferredcites →https://doi.org/10.1016/b978-0-08-096532-1.00106-0openalex-extracted
Biaxial Stress Testing Methods for Sheet Metals
inferredcites →https://doi.org/10.1016/j.ijmecsci.2015.08.022openalex-extracted
Identification of sheet metal hardening for large strains with an in-plane biaxial tensile test and a dedicated cross specimen
inferredcites →https://doi.org/10.1016/j.ijmecsci.2018.03.025openalex-extracted
Correlation of the maximum shear stress with micro-mechanisms of ductile fracture for metals with high strength-to-weight ratio
inferredcites →https://doi.org/10.1016/j.ijmecsci.2020.105618openalex-extracted
Experimental verification of anisotropic constitutive models under tension-tension and tension-compression stress states
inferredcites →https://doi.org/10.1016/j.ijmecsci.2020.105706openalex-extracted
On the expansion of a circular hole in an orthotropic elastoplastic thin sheet
inferredcites →https://doi.org/10.1016/j.ijmecsci.2020.105715openalex-extracted
An accurate determination method for constitutive model of anisotropic tubular materials with DIC-based controlled biaxial tensile test
inferredcites →https://doi.org/10.1016/j.ijmecsci.2020.105770openalex-extracted
Experimental and theoretical plasticity analyses of steel materials deformed under a nonlinear strain path
inferredcites →https://doi.org/10.1016/j.ijmecsci.2020.106067openalex-extracted
Thinning prediction of hole-expansion test for DP980 sheet based on a non-associated flow rule
inferredcites →https://doi.org/10.1016/j.ijmecsci.2022.107663openalex-extracted
Plastic anisotropy evolution of SS316L and modeling for novel cruciform specimen
inferredcites →https://doi.org/10.1016/j.ijplas.2004.06.004openalex-extracted
Linear transfomation-based anisotropic yield functions
inferredcites →https://doi.org/10.1016/j.ijplas.2012.12.003openalex-extracted
Multiaxial tube expansion test method for measurement of sheet metal deformation behavior under biaxial tension for a large strain range
inferredcites →https://doi.org/10.1016/j.ijplas.2016.04.014openalex-extracted
Fracture-based forming limit criteria for anisotropic materials in sheet metal forming
inferredcites →https://doi.org/10.1016/j.ijplas.2016.10.002openalex-extracted
Material modeling of 6016-O and 6016-T4 aluminum alloy sheets and application to hole expansion forming simulation
inferredcites →https://doi.org/10.1016/j.ijplas.2017.04.008openalex-extracted
Anisotropic ductile fracture criterion based on linear transformation
inferredcites →https://doi.org/10.1016/j.ijplas.2019.08.011openalex-extracted
A new approach for fracture prediction considering general anisotropy of metal sheets
inferredcites →https://doi.org/10.1016/j.ijsolstr.2018.08.005openalex-extracted
Numerical modeling for accurate prediction of strain localization in hole expansion of a steel sheet
inferredcites →https://doi.org/10.1016/j.ijsolstr.2020.07.010openalex-extracted
Description of anisotropic properties of sheet metal based on spline curves and hole expansion test simulation of high-strength steel
inferredcites →https://doi.org/10.1016/j.ijsolstr.2021.01.017openalex-extracted
A user-friendly anisotropic ductile fracture criterion for sheet metal under proportional loading
inferredcites →https://doi.org/10.1016/j.jmatprotec.2010.10.025openalex-extracted
Effect of anisotropic yield functions on the accuracy of hole expansion simulations
inferredcites →https://doi.org/10.1016/j.jmatprotec.2012.12.007openalex-extracted
Numerical verification of a biaxial tensile test method using a cruciform specimen
inferredcites →https://doi.org/10.1016/j.jmatprotec.2020.116979openalex-extracted
Evolving asymmetric yield surfaces of quenching and partitioning steels: Characterization and modeling
inferredcites →https://doi.org/10.1016/j.jmatprotec.2021.117211openalex-extracted
Effect of plastic anisotropy and Portevin-Le Chatelier bands on hole-expansion in AA7075 sheets in -T6 and -W tempers
inferredcites →https://doi.org/10.1016/j.jmatprotec.2021.117488openalex-extracted
Edge crack test methods for AHSS steel grades: A review and comparisons
inferredcites →https://doi.org/10.1016/j.matdes.2009.04.001openalex-extracted
Analysis of stamping performances of dual phase steels: A multi-objective approach to reduce springback and thinning failure
inferredcites →https://doi.org/10.1016/s0020-7403(01)00014-5openalex-extracted
Optimization of drawbead restraining forces and drawbead design in sheet metal forming process
inferredcites →https://doi.org/10.1016/s0749-6419(02)00019-0openalex-extracted
Plane stress yield function for aluminum alloy sheets—part 1: theory
inferredcites →https://doi.org/10.1016/s0749-6419(04)00089-0openalex-extracted
Spring-back evaluation of automotive sheets based on isotropic-kinematic hardening laws and non-quadratic anisotropic yield functionsPart II: characterization of material properties
inferredcites →https://doi.org/10.1016/s0924-0136(98)00155-1openalex-extracted
Measurement and analysis of differential work hardening in cold-rolled steel sheet under biaxial tension
inferredcites →https://doi.org/10.1063/1.4963620openalex-extracted
Enlargement of measurable strain range in biaxial cruciform test
inferredcites →https://doi.org/10.1063/1.5007971openalex-extracted
Effect of the determination method of the material parameters on the accuracy of the hole expansion simulation for cold rolled steel sheet
inferredcites →https://doi.org/10.1080/14786445108561065openalex-extracted
XLVI. A theory of the plastic distortion of a polycrystalline aggregate under combined stresses.
inferredcites →https://doi.org/10.1088/1742-6596/1063/1/012139openalex-extracted
Study of the frictional contact conditions in the hole expansion test
inferredcites →https://doi.org/10.1088/1742-6596/1063/1/012160openalex-extracted
Cruciform specimen design for large plastic strain during biaxial tensile testing
inferredcites →https://doi.org/10.1098/rspa.1948.0045openalex-extracted
A theory of the yielding and plastic flow of anisotropic metals
inferredcites →https://doi.org/10.1115/1.4010900openalex-extracted
The Plasticity of an Isotropic Aggregate of Anisotropic Face-Centered Cubic Crystals
inferredcites →https://doi.org/10.2355/isijinternational.isijint-2021-365openalex-extracted
Material Modeling of Hot-Rolled Steel Sheet Considering Differential Hardening and Hole Expansion Simulation
inferredcites →https://doi.org/10.2355/tetsutohagane.tetsu-2020-002openalex-extracted
Material Modeling of Hot-Rolled Steel Sheet Considering Differential Hardening and Hole Expansion Simulation
inferredcites →https://doi.org/10.3390/jmmp5020028openalex-extracted
Hole-Expansion: Sensitivity of Failure Prediction on Plastic Anisotropy Modeling
inferredcites →https://doi.org/10.3403/30331299openalex-extracted
Metallic materials. Sheet and strip. Hole expanding test
inferredcites →https://doi.org/10.4028/www.scientific.net/kem.504-506.59openalex-extracted
Biaxial Tensile Test of High Strength Steel Sheet for Large Plastic Strain Range

What points at this work

Incoming claims: where this work appears in other papers’ reference lists and arguments.

inferred← citeshttps://doi.org/10.1016/j.cirp.2024.04.026openalex-snapshot
Identification of Yld2000–2d anisotropic yield function parameters from single hole expansion test using machine learning
Editorial review for independent work. ICSAC — the Institute for Complexity Science and Advanced Computing — runs a structured editorial panel for researchers publishing outside journals, and publishes on CiteStamp rails. Submission is free and goes through ORCID: icsacinstitute.org/submit.