On the public citation graph

https://doi.org/10.2139/ssrn.4631871

0 signed · 49 inferred · view as graph

Inferred edges come from two machine sources: sweeps of open repository metadata (mostly SSRN and Zenodo), and a bulk OpenAlex citation snapshot. Every row below is labelled with the one it came from. Neither is a complete citation index — absence here is not evidence of absence.

Is this your work? Sign in with ORCID and put your name on the claims that are yours.
Claim with ORCID
Reference health. See whether every reference in this work resolves to a known work and none has been retracted — and get a dated CiteStamped badge you can embed.
See reference health

What this work says

Outgoing claims: the papers this work cites, builds on, or argues with.

inferredcites →https://doi.org/10.1002/9783433604076openalex-extracted
Ultra‐High Performance Concrete UHPC
inferredcites →https://doi.org/10.1016/0008-8846(94)90022-1openalex-extracted
Optimization of ultra-high-performance concrete by the use of a packing model
inferredcites →https://doi.org/10.1016/0148-9062(95)92584-5openalex-extracted
Blast effects on buildings. Design of buildings to optimize resistance to blast loading
inferredcites →https://doi.org/10.1016/j.buildenv.2006.03.013openalex-extracted
The effect of curing conditions on compressive strength of ultra high strength concrete with high volume mineral admixtures
inferredcites →https://doi.org/10.1016/j.cemconcomp.2012.08.027openalex-extracted
Effects of colloidal nanosilica on rheological and mechanical properties of fly ash–cement mortar
inferredcites →https://doi.org/10.1016/j.cemconcomp.2016.03.014openalex-extracted
Effect of loading rates on pullout behavior of high strength steel fibers embedded in ultra-high performance concrete
inferredcites →https://doi.org/10.1016/j.cemconcomp.2018.12.023openalex-extracted
Comparative pullout behavior of half-hooked and commercial steel fibers embedded in UHPC under static and impact loads
inferredcites →https://doi.org/10.1016/j.cemconcomp.2021.104108openalex-extracted
Contribution of fiber orientation to enhancing dynamic properties of UHPC under impact loading
inferredcites →https://doi.org/10.1016/j.cemconres.2014.07.016openalex-extracted
Strength and Young's modulus change in concrete due to long-term drying and heating up to 90 °C
inferredcites →https://doi.org/10.1016/j.cemconres.2018.04.011openalex-extracted
Combined curing as a novel approach to improve resistance of ultra-high performance concrete to explosive spalling under high temperature and its mechanical properties
inferredcites →https://doi.org/10.1016/j.compositesb.2021.109022openalex-extracted
Combination usage of nano-SiO2-coated steel fiber and silica fume and its improvement effect on SFRCC
inferredcites →https://doi.org/10.1016/j.compositesb.2021.109220openalex-extracted
New development of ultra-high-performance concrete (UHPC)
inferredcites →https://doi.org/10.1016/j.compstruct.2017.04.069openalex-extracted
Effects of fiber shape, aspect ratio, and volume fraction on flexural behavior of ultra-high-performance fiber-reinforced cement composites
inferredcites →https://doi.org/10.1016/j.compstruct.2018.08.066openalex-extracted
The pull-out behavior of straight and hooked-end steel fiber from hybrid fiber reinforced cementitious composite: Experimental study and analytical modelling
inferredcites →https://doi.org/10.1016/j.conbuildmat.2008.08.003openalex-extracted
Mechanical properties of reactive powder concrete containing mineral admixtures under different curing regimes
inferredcites →https://doi.org/10.1016/j.conbuildmat.2013.01.003openalex-extracted
The effect of autoclave pressure, temperature and duration time on mechanical properties of reactive powder concrete
inferredcites →https://doi.org/10.1016/j.conbuildmat.2014.11.017openalex-extracted
Exploring mechanical and durability properties of ultra-high performance concrete incorporating various steel fiber lengths and dosages
inferredcites →https://doi.org/10.1016/j.conbuildmat.2017.03.080openalex-extracted
Size-dependent impact resistance of ultra-high-performance fiber-reinforced concrete beams
inferredcites →https://doi.org/10.1016/j.conbuildmat.2017.07.181openalex-extracted
Effect of different curing regimes and durations on early strength development of reactive powder concrete
inferredcites →https://doi.org/10.1016/j.conbuildmat.2017.10.074openalex-extracted
Effects of autoclave curing and fly ash on mechanical properties of ultra-high performance concrete
inferredcites →https://doi.org/10.1016/j.conbuildmat.2018.08.146openalex-extracted
Improvement effect of steel fiber orientation control on mechanical performance of UHPC
inferredcites →https://doi.org/10.1016/j.conbuildmat.2020.121112openalex-extracted
Mechanical performances and microstructures of metakaolin contained UHPC matrix under steam curing conditions
inferredcites →https://doi.org/10.1016/j.conbuildmat.2022.127956openalex-extracted
Recent developments in Engineered/Strain-Hardening Cementitious Composites (ECC/SHCC) with high and ultra-high strength
inferredcites →https://doi.org/10.1016/j.conbuildmat.2022.130255openalex-extracted
Effect of nanosilica on fiber pullout behavior and mechanical properties of strain hardening ultra-high performance concrete
inferredcites →https://doi.org/10.1016/j.conbuildmat.2023.132149openalex-extracted
Investigation on the damage features and dynamic response of reinforced concrete slabs with polyurethane sacrificial cladding under close-range explosions
inferredcites →https://doi.org/10.1016/j.conbuildmat.2023.132335openalex-extracted
Enhancing the strain-hardening performance of ultra-high performance concrete by tailoring matrix toughness and fiber parameters
inferredcites →https://doi.org/10.1016/j.engfailanal.2023.107412openalex-extracted
Damage behavior of concrete members subjected to underwater contact explosion
inferredcites →https://doi.org/10.1016/j.engfracmech.2022.108661openalex-extracted
Modelling dynamic failure of geometrical-similar concrete subjected to tension-compression loads: Effect of strain rate and lateral stress ratio
inferredcites →https://doi.org/10.1016/j.ijimpeng.2021.103893openalex-extracted
Comparative study of strength-based damage evolution in ultra-high-performance concrete (UHPC) and conventional concrete (CC) under dynamic loading
inferredcites →https://doi.org/10.1016/j.ijimpeng.2021.103907openalex-extracted
Ultra-high performance concrete subjected to high-velocity projectile impact: implementation of K&C model with consideration of failure surfaces and dynamic increase factors
inferredcites →https://doi.org/10.1016/j.ijimpeng.2022.104316openalex-extracted
Explosion resistance of 3D printing ultra-high performance concrete based on contact explosion tests
inferredcites →https://doi.org/10.1016/j.ijimpeng.2023.104722openalex-extracted
Impact resistance of concrete and fibre-reinforced concrete: A review
inferredcites →https://doi.org/10.1016/j.istruc.2021.10.036openalex-extracted
A review on high-strength engineered cementitious composites (HS-ECC): Design, mechanical property and structural application
inferredcites →https://doi.org/10.1016/j.jobe.2022.104370openalex-extracted
Influence of fibers on the mechanical properties and durability of ultra-high-performance concrete: A review
inferredcites →https://doi.org/10.1016/j.jobe.2022.104769openalex-extracted
Dynamic increase factors for fiber-reinforced cement composites: A review
inferredcites →https://doi.org/10.1016/j.mtcomm.2023.105468openalex-extracted
Ultra-high performance concrete: Mix design, raw materials and curing regimes-A review
inferredcites →https://doi.org/10.1016/s0009-2541(99)00205-3openalex-extracted
Hydrothermal formation of the calcium silicate hydrates, tobermorite (Ca5Si6O16(OH)2·4H2O) and xonotlite (Ca6Si6O17(OH)2): an in situ synchrotron study
inferredcites →https://doi.org/10.1016/s0734-743x(01)00020-3openalex-extracted
Dynamic behavior of concrete at high strain rates and pressures: I. experimental characterization
inferredcites →https://doi.org/10.1061/(asce)0733-9399(1992)118:11(2246)openalex-extracted
Steady‐State and Multiple Cracking of Short Random Fiber Composites
inferredcites →https://doi.org/10.1061/(asce)cf.1943-5509.0000954openalex-extracted
Risk of Progressive Collapse of Buildings from Terrorist Attacks: Are the Benefits of Protection Worth the Cost?
inferredcites →https://doi.org/10.1111/j.1151-2916.1994.tb06987.xopenalex-extracted
Critical Appraisal of Limiting Strain Rates for Testing Ceramics in a Split Hopkinson Pressure Bar
inferredcites →https://doi.org/10.1115/1.2842350openalex-extracted
Strain-Rate-Dependent Constitutive Equations for Concrete
inferredcites →https://doi.org/10.14359/20199openalex-extracted
Loading Rate Effect on Pullout Behavior of Deformed Steel Fibers
inferredcites →https://doi.org/10.14359/51685792openalex-extracted
Effect of Ultra-High-Performance Concrete on Pullout Behavior of High-Strength Brass-Coated Straight Steel Fibers
inferredcites →https://doi.org/10.1520/c1856_c1856m-17openalex-extracted
Standard Practice for Fabricating and Testing Specimens of Ultra-High Performance Concrete
inferredcites →https://doi.org/10.31142/ijtsrd23455openalex-extracted
Structures to Resist the Effects of the Accidental Explosions
inferredcites →https://doi.org/10.35789/fib.bull.0066openalex-extracted
fib Bulletin 66. Model code 2010
inferredcites →https://doi.org/10.6100/ir674188openalex-extracted
An integral design concept for ecological self-compacting concrete

What points at this work

Incoming claims: where this work appears in other papers’ reference lists and arguments.

inferred← citeshttps://doi.org/10.1016/j.istruc.2025.108667openalex-snapshot
Effect of thermal curing regimes on the mechanical properties, and durability of UHPC: A state-of-the-art review
Editorial review for independent work. ICSAC — the Institute for Complexity Science and Advanced Computing — runs a structured editorial panel for researchers publishing outside journals, and publishes on CiteStamp rails. Submission is free and goes through ORCID: icsacinstitute.org/submit.