On the public citation graph

Fine-Scale Microstructure, Dislocation Substructure and Elemental Distribution in Additive Manufacturing of Ti-6al-4v Alloy

https://doi.org/10.2139/ssrn.4646648
0 signed · 68 inferred · view as graph

Inferred edges come from two machine sources: sweeps of open repository metadata (mostly SSRN and Zenodo), and a bulk OpenAlex citation snapshot. Every row below is labelled with the one it came from. Neither is a complete citation index — absence here is not evidence of absence.

Is this your work? Sign in with ORCID and put your name on the claims that are yours.
Claim with ORCID
Reference health. See whether every reference in this work resolves to a known work and none has been retracted — and get a dated CiteStamped badge you can embed.
See reference health

What this work says

Outgoing claims: the papers this work cites, builds on, or argues with.

inferredcites →https://doi.org/10.1002/3527602119openalex-extracted
Titanium and Titanium Alloys
inferredcites →https://doi.org/10.1007/s10853-019-03984-wopenalex-extracted
On the potential mechanisms of β to α′ + β decomposition in two phase titanium alloys during additive manufacturing: a combined transmission Kikuchi diffraction and 3D atom probe study
inferredcites →https://doi.org/10.1007/s11661-010-0397-xopenalex-extracted
The Origin of Microstructural Diversity, Texture, and Mechanical Properties in Electron Beam Melted Ti-6Al-4V
inferredcites →https://doi.org/10.1007/s11661-020-05625-3openalex-extracted
An Overview of the Thermomechanical Processing of α/β Titanium Alloys: Current Status and Future Research Opportunities
inferredcites →https://doi.org/10.1007/s11837-006-0083-zopenalex-extracted
Vacuum plasma spraying: A new concept for manufacturing Ti-6Al-4V structures
inferredcites →https://doi.org/10.1007/s11837-016-2210-9openalex-extracted
Effect of Hypoeutectic Boron Additions on the Grain Size and Mechanical Properties of Ti-6Al-4V Manufactured with Powder Bed Electron Beam Additive Manufacturing
inferredcites →https://doi.org/10.1007/s40194-021-01248-3openalex-extracted
Effect of heat input on microstructure and mechanical property of wire-arc additive manufactured Ti-6Al-4V alloy
inferredcites →https://doi.org/10.1016/0956-7151(91)90104-9openalex-extracted
Interphase boundary structures of intragranular proeutectoid α plates in a hypoeutectoid TiCr alloy
inferredcites →https://doi.org/10.1016/0956-7151(94)90193-7openalex-extracted
The evolution and growth kinetics of precipitate plates growing by the ledge mechanism
inferredcites →https://doi.org/10.1016/b978-0-12-812456-7.00015-9openalex-extracted
Additive manufacturing of titanium and titanium alloys for biomedical applications
inferredcites →https://doi.org/10.1016/b978-0-12-822056-6.00013-8openalex-extracted
Additive manufacturing of titanium alloys: microstructure and texture evolution, defect formation and mechanical response
inferredcites →https://doi.org/10.1016/j.actamat.2004.01.037openalex-extracted
A TEM study of the habit plane structure of intragrainular proeutectoid α precipitates in a Ti–7.26 wt%Cr alloy
inferredcites →https://doi.org/10.1016/j.actamat.2004.07.034openalex-extracted
Crystallographic variant selection in Ti–6Al–4V
inferredcites →https://doi.org/10.1016/j.actamat.2008.08.016openalex-extracted
Nucleation and variant selection of secondary α plates in a β Ti alloy
inferredcites →https://doi.org/10.1016/j.actamat.2010.02.004openalex-extracted
A study of the microstructural evolution during selective laser melting of Ti–6Al–4V
inferredcites →https://doi.org/10.1016/j.actamat.2011.05.023openalex-extracted
Development of solidification microstructure in boron-modified alloy Ti–6Al–4V–0.1B
inferredcites →https://doi.org/10.1016/j.actamat.2013.03.007openalex-extracted
Influence of transformation temperature on microtexture formation associated with α precipitation at β grain boundaries in a β metastable titanium alloy
inferredcites →https://doi.org/10.1016/j.actamat.2014.05.003openalex-extracted
Variant selection of grain boundary α by special prior β grain boundaries in titanium alloys
inferredcites →https://doi.org/10.1016/j.actamat.2014.11.028openalex-extracted
Additive manufacturing of strong and ductile Ti–6Al–4V by selective laser melting via in situ martensite decomposition
inferredcites →https://doi.org/10.1016/j.actamat.2014.12.044openalex-extracted
Variant selection by dislocations during α precipitation in α/β titanium alloys
inferredcites →https://doi.org/10.1016/j.actamat.2015.06.036openalex-extracted
Graded microstructure and mechanical properties of additive manufactured Ti–6Al–4V via electron beam melting
inferredcites →https://doi.org/10.1016/j.actamat.2015.06.043openalex-extracted
Microstructure design and mechanical properties in a near-α Ti–4Mo alloy
inferredcites →https://doi.org/10.1016/j.actamat.2015.11.011openalex-extracted
Massive transformation in Ti–6Al–4V additively manufactured by selective electron beam melting
inferredcites →https://doi.org/10.1016/j.actamat.2017.04.071openalex-extracted
Orientation dependent spheroidization response and macro-zone formation during sub β-transus processing of Ti-6Al-4V alloy
inferredcites →https://doi.org/10.1016/j.actamat.2018.09.064openalex-extracted
Globularization using heat treatment in additively manufactured Ti-6Al-4V for high strength and toughness
inferredcites →https://doi.org/10.1016/j.actamat.2021.116827openalex-extracted
Statistical modeling of microstructure evolution in a Ti-6Al-4V alloy during isothermal compression
inferredcites →https://doi.org/10.1016/j.addma.2016.04.001openalex-extracted
In-situ TiB/near α Ti matrix composites manufactured by selective laser melting
inferredcites →https://doi.org/10.1016/j.addma.2017.08.014openalex-extracted
Efficient predictive model of part distortion and residual stress in selective laser melting
inferredcites →https://doi.org/10.1016/j.addma.2018.03.006openalex-extracted
Interpass rolling of Ti-6Al-4V wire + arc additively manufactured features for microstructural refinement
inferredcites →https://doi.org/10.1016/j.addma.2018.04.006openalex-extracted
Additive manufacturing of a novel Ti-Al-V-Fe alloy using selective laser melting
inferredcites →https://doi.org/10.1016/j.addma.2019.101004openalex-extracted
Influence of in situ ceramic reinforcement towards tailoring titanium matrix composites using laser-based additive manufacturing
inferredcites →https://doi.org/10.1016/j.addma.2022.103041openalex-extracted
Deciphering the transformation pathway in laser powder-bed fusion additive manufacturing of Ti-6Al-4V alloy
inferredcites →https://doi.org/10.1016/j.apsusc.2012.09.114openalex-extracted
Effects of Ti and TiC ceramic powder on laser-cladded Ti–6Al–4V in situ intermetallic composite
inferredcites →https://doi.org/10.1016/j.apt.2015.07.008openalex-extracted
Microstructural analysis of Ti–6Al–4V powder for cold gas dynamic spray applications
inferredcites →https://doi.org/10.1016/j.ijfatigue.2018.03.030openalex-extracted
Phase morphology, variants and crystallography of alloy microstructures in cold dwell fatigue
inferredcites →https://doi.org/10.1016/j.ijfatigue.2018.07.035openalex-extracted
Significance of hot isostatic pressing (HIP) on multiaxial deformation and fatigue behaviors of additive manufactured Ti-6Al-4V including build orientation and surface roughness effects
inferredcites →https://doi.org/10.1016/j.jallcom.2012.08.123openalex-extracted
The influence of temperature and strain rate on the deformation response and microstructural evolution during hot compression of a titanium alloy Ti–6Al–4V–0.1B
inferredcites →https://doi.org/10.1016/j.jallcom.2015.04.143openalex-extracted
The influence of partitioning on the growth of intragranular α in near-β Ti alloys
inferredcites →https://doi.org/10.1016/j.jmatprotec.2020.116689openalex-extracted
Hybrid manufacturing of components from Ti-6Al-4V by metal forming and wire-arc additive manufacturing
inferredcites →https://doi.org/10.1016/j.matchar.2013.07.012openalex-extracted
Effect of build geometry on the β-grain structure and texture in additive manufacture of Ti6Al4V by selective electron beam melting
inferredcites →https://doi.org/10.1016/j.matchar.2016.02.001openalex-extracted
The effectiveness of combining rolling deformation with Wire–Arc Additive Manufacture on β-grain refinement and texture modification in Ti–6Al–4V
inferredcites →https://doi.org/10.1016/j.matchar.2022.112090openalex-extracted
Microstructure evolution and mechanical properties of wrought/wire arc additive manufactured Ti-6Al-4V joints by electron beam welding
inferredcites →https://doi.org/10.1016/j.matdes.2015.09.053openalex-extracted
Texture and microstructure characterization in laser additive manufactured Ti–6Al–2Zr–2Sn–3Mo–1.5Cr–2Nb titanium alloy
inferredcites →https://doi.org/10.1016/j.matdes.2016.06.117openalex-extracted
Formation and control of martensite in Ti-6Al-4V alloy produced by selective laser melting
inferredcites →https://doi.org/10.1016/j.matdes.2017.08.048openalex-extracted
Improved fatigue endurance ratio of additive manufactured Ti-6Al-4V lattice by hot isostatic pressing
inferredcites →https://doi.org/10.1016/j.matdes.2018.03.065openalex-extracted
Residual stress and texture control in Ti-6Al-4V wire + arc additively manufactured intersections by stress relief and rolling
inferredcites →https://doi.org/10.1016/j.matlet.2012.04.116openalex-extracted
Microstructure of additive layer manufactured Ti–6Al–4V after exceptional post heat treatments
inferredcites →https://doi.org/10.1016/j.msea.2011.10.095openalex-extracted
Morphology, microstructure, and hardness of titanium (Ti-6Al-4V) blocks deposited by wire-feed additive layer manufacturing (ALM)
inferredcites →https://doi.org/10.1016/j.msea.2015.11.052openalex-extracted
Electron beam melted Ti–6Al–4V: Microstructure, texture and mechanical behavior of the as-built and heat-treated material
inferredcites →https://doi.org/10.1016/j.msea.2020.139020openalex-extracted
Effects of subtransus heat treatments on microstructure features and mechanical properties of wire and arc additive manufactured Ti–6Al–4V alloy
inferredcites →https://doi.org/10.1016/j.msea.2021.141494openalex-extracted
Site-specific microstructure, porosity and mechanical properties of LENS™ processed Ti–6Al–4V alloy
inferredcites →https://doi.org/10.1016/j.msec.2016.03.066openalex-extracted
Understanding compressive deformation behavior of porous Ti using finite element analysis
inferredcites →https://doi.org/10.1016/j.pnsc.2016.06.009openalex-extracted
Study on the formation mechanism of α lamellae in a near β titanium alloy
inferredcites →https://doi.org/10.1016/j.scriptamat.2017.11.021openalex-extracted
Achieving superior ductility for laser solid formed extra low interstitial Ti-6Al-4V titanium alloy through equiaxial alpha microstructure
inferredcites →https://doi.org/10.1016/s0921-5093(00)01904-3openalex-extracted
Variant selection in heterogeneous nucleation on defects in diffusional phase transformation and precipitation
inferredcites →https://doi.org/10.1016/s0921-5093(97)00783-1openalex-extracted
Thermomechanical processing of beta titanium alloys—an overview
inferredcites →https://doi.org/10.1016/s0921-5093(97)00802-2openalex-extracted
Phase transformations during cooling in α+β titanium alloys
inferredcites →https://doi.org/10.1016/s1359-6454(01)00236-1openalex-extracted
The effect of alpha platelet thickness on plastic flow during hot working of TI–6Al–4V with a transformed microstructure
inferredcites →https://doi.org/10.1063/1.1733573openalex-extracted
Atomic Screening Constants from SCF Functions
inferredcites →https://doi.org/10.1080/14686996.2017.1361305openalex-extracted
Additive manufacturing of metals: a brief review of the characteristic microstructures and properties of steels, Ti-6Al-4V and high-entropy alloys
inferredcites →https://doi.org/10.1108/rpj-04-2018-0088openalex-extracted
A review of laser engineered net shaping (LENS) build and process parameters of metallic parts
inferredcites →https://doi.org/10.1111/jmi.12569openalex-extracted
Using transmission Kikuchi diffraction to characterise α variants in an α+β titanium alloy
inferredcites →https://doi.org/10.1179/1362171815y.0000000050openalex-extracted
Effect of microstructure and defects on fatigue behaviour of directed energy deposited Ti–6Al–4V
inferredcites →https://doi.org/10.1201/9781003011804openalex-extracted
Phase Transformations in Metals and Alloys
inferredcites →https://doi.org/10.1557/jmr.2018.99openalex-extracted
Synthesis, characterization, and bioactivity of SrTiO3-incorporated titanium coating
inferredcites →https://doi.org/10.26153/tsw/15574openalex-extracted
Improved Microstructure and Increased Mechanical Properties of Additive Manufacture Produced Ti-6Al-4V By Interpass Cold Rolling
inferredcites →https://doi.org/10.3390/ma13071509openalex-extracted
Effect of Gradient Energy Density on the Microstructure and Mechanical Properties of Ti6Al4V Fabricated by Selective Electron Beam Additive Manufacture
inferredcites →https://doi.org/10.4028/www.scientific.net/msf.1000.375openalex-extracted
Alteration in the Phase Morphology of Ti-6Al-4V Alloy Produced Using Directed Energy Deposition
Editorial review for independent work. ICSAC — the Institute for Complexity Science and Advanced Computing — runs a structured editorial panel for researchers publishing outside journals, and publishes on CiteStamp rails. Submission is free and goes through ORCID: icsacinstitute.org/submit.