On the public citation graph

ssrn.4669101

0 signed · 71 inferred · view as graph

Inferred edges come from two machine sources: sweeps of open repository metadata (mostly SSRN and Zenodo), and a bulk OpenAlex citation snapshot. Every row below is labelled with the one it came from. Neither is a complete citation index — absence here is not evidence of absence.

Is this your work? Sign in with ORCID and put your name on the claims that are yours.

Claim with ORCID

Reference health. See whether every reference in this work resolves to a known work and none has been retracted — and get a dated CiteStamped badge you can embed.

See reference health

What this work says

Outgoing claims: the papers this work cites, builds on, or argues with.

inferredcites →https://doi.org/10.1002/adem.201600667openalex-extracted

Laser Powder Bed Fusion – Materials Issues and Optimized Processing Parameters for Tool steels, AlSiMg‐ and CuCrZr‐Alloys

inferredcites →https://doi.org/10.1007/bf02868727openalex-extracted

The Cr-Cu (Chromium-Copper) system

inferredcites →https://doi.org/10.1007/s00170-017-0697-zopenalex-extracted

Investigation of remelting and preheating in SLM of 18Ni300 maraging steel as corrective and preventive measures for porosity reduction

inferredcites →https://doi.org/10.1007/s00170-020-04941-7openalex-extracted

Additive manufacturing of CuCr1Zr by development of a gas atomization and laser powder bed fusion routine

inferredcites →https://doi.org/10.1007/s00170-021-06810-3openalex-extracted

Scanning strategy in selective laser melting (SLM): a review

inferredcites →https://doi.org/10.1007/s10853-022-06990-7openalex-extracted

A critical review on the effects of process-induced porosity on the mechanical properties of alloys fabricated by laser powder bed fusion

inferredcites →https://doi.org/10.1007/s10973-019-08702-xopenalex-extracted

Optimisation of heat treatment of Al–Cu–(Mg–Ag) cast alloys

inferredcites →https://doi.org/10.1007/s11661-011-0731-yopenalex-extracted

As-Fabricated and Heat-Treated Microstructures of the Ti-6Al-4V Alloy Processed by Selective Laser Melting

inferredcites →https://doi.org/10.1007/s11837-019-03761-9openalex-extracted

Methods for Rapid Pore Classification in Metal Additive Manufacturing

inferredcites →https://doi.org/10.1016/0001-6160(65)90067-2openalex-extracted

The nucleation of precipitates: The system Al-Zn-Mg

inferredcites →https://doi.org/10.1016/0022-3115(92)90381-topenalex-extracted

A survey of the properties of copper alloys for use as fusion reactor materials

inferredcites →https://doi.org/10.1016/0025-5416(88)90226-1openalex-extracted

Enhanced strength in high conductivity copper alloys

inferredcites →https://doi.org/10.1016/0040-6031(85)85402-2openalex-extracted

The reaction of oxygen and zirconium

inferredcites →https://doi.org/10.1016/0956-7151(94)90483-9openalex-extracted

Solute trapping in aluminum alloys

inferredcites →https://doi.org/10.1016/0956-716x(95)00084-9openalex-extracted

Phase relationships in Cu-rich corner of the Cu-Cr-Zr phase diagram

inferredcites →https://doi.org/10.1016/b0-08-043152-6/00292-8openalex-extracted

Copper Alloys: Properties and Applications

inferredcites →https://doi.org/10.1016/b978-0-08-056033-5.00122-1openalex-extracted

Physical and Mechanical Properties of Copper and Copper Alloys

inferredcites →https://doi.org/10.1016/j.actamat.2009.12.004openalex-extracted

Phase stability for the Cu–Zr system: First-principles, experiments and solution-based modeling

inferredcites →https://doi.org/10.1016/j.actamat.2012.11.052openalex-extracted

Fine-structured aluminium products with controllable texture by selective laser melting of pre-alloyed AlSi10Mg powder

inferredcites →https://doi.org/10.1016/j.actamat.2016.02.014openalex-extracted

Laser powder-bed fusion additive manufacturing: Physics of complex melt flow and formation mechanisms of pores, spatter, and denudation zones

inferredcites →https://doi.org/10.1016/j.actamat.2016.07.019openalex-extracted

Additive manufacturing of metals

inferredcites →https://doi.org/10.1016/j.addma.2014.08.001openalex-extracted

Reducing porosity in AlSi10Mg parts processed by selective laser melting

inferredcites →https://doi.org/10.1016/j.addma.2014.12.007openalex-extracted

Hierarchical design principles of selective laser melting for high quality metallic objects

inferredcites →https://doi.org/10.1016/j.addma.2020.101552openalex-extracted

Defect structure process maps for laser powder bed fusion additive manufacturing

inferredcites →https://doi.org/10.1016/j.addma.2021.101888openalex-extracted

Laser powder bed fusion (L-PBF) of Cu and CuCrZr parts: Influence of an absorptive physical vapor deposition (PVD) coating on the printing process

inferredcites →https://doi.org/10.1016/j.cirp.2011.03.063openalex-extracted

Manufacturing by combining Selective Laser Melting and Selective Laser Erosion/laser re-melting

inferredcites →https://doi.org/10.1016/j.ijmecsci.2022.107389openalex-extracted

On the role of pre- and post-contour scanning in laser powder bed fusion: Thermal-fluid dynamics and laser reflections

inferredcites →https://doi.org/10.1016/j.jallcom.2014.06.172openalex-extracted

The influence of the laser scan strategy on grain structure and cracking behaviour in SLM powder-bed fabricated nickel superalloy

inferredcites →https://doi.org/10.1016/j.jallcom.2020.154350openalex-extracted

Selective laser melting of Cu–Cr–Zr copper alloy: Parameter optimization, microstructure and mechanical properties

inferredcites →https://doi.org/10.1016/j.jallcom.2022.166627openalex-extracted

A study on the mechanical and electrical properties of high-strength CuCrZr alloy fabricated using laser powder bed fusion

inferredcites →https://doi.org/10.1016/j.jmatprotec.2010.05.010openalex-extracted

Single track formation in selective laser melting of metal powders

inferredcites →https://doi.org/10.1016/j.jmatprotec.2010.09.019openalex-extracted

Selective laser melting of aluminium components

inferredcites →https://doi.org/10.1016/j.jmatprotec.2012.05.012openalex-extracted

Research on track overlapping during Selective Laser Melting of powders

inferredcites →https://doi.org/10.1016/j.jmatprotec.2017.06.023openalex-extracted

Effect of scan strategy on density and metallurgical properties of 17-4PH parts printed by Selective Laser Melting (SLM)

inferredcites →https://doi.org/10.1016/j.jmrt.2021.07.020openalex-extracted

Zr-containing precipitate evolution and its effect on the mechanical properties of Cu–Cr–Zr alloys

inferredcites →https://doi.org/10.1016/j.jmrt.2022.06.158openalex-extracted

Selective laser melting of CuCrZr alloy: processing optimisation, microstructure and mechanical properties

inferredcites →https://doi.org/10.1016/j.jnucmat.2021.152841openalex-extracted

Development of CuCrZr via Electron Beam Powder Bed Fusion (EB-PBF)

inferredcites →https://doi.org/10.1016/j.matdes.2016.10.037openalex-extracted

On the limitations of Volumetric Energy Density as a design parameter for Selective Laser Melting

inferredcites →https://doi.org/10.1016/j.matdes.2019.108346openalex-extracted

A review of critical repeatability and reproducibility issues in powder bed fusion

inferredcites →https://doi.org/10.1016/j.matdes.2020.108762openalex-extracted

Processing parameters in laser powder bed fusion metal additive manufacturing

inferredcites →https://doi.org/10.1016/j.msea.2015.01.065openalex-extracted

Deformation microstructures, strengthening mechanisms, and electrical conductivity in a Cu–Cr–Zr alloy

inferredcites →https://doi.org/10.1016/j.msea.2015.02.077openalex-extracted

The phase transformation and its effects on properties of a Cu−0.12 wt% Zr alloy

inferredcites →https://doi.org/10.1016/j.msea.2017.11.103openalex-extracted

Effect of scanning strategies on residual stress and mechanical properties of Selective Laser Melted Ti6Al4V

inferredcites →https://doi.org/10.1016/j.msea.2018.12.017openalex-extracted

Effect of heat treatments on microstructure and properties of CuCrZr produced by laser-powder bed fusion

inferredcites →https://doi.org/10.1016/j.msea.2019.04.053openalex-extracted

Contribution of Zr to strength and grain refinement in Cu Cr Zr alloy

inferredcites →https://doi.org/10.1016/j.msea.2021.141915openalex-extracted

CuCrZr alloy produced by laser powder bed fusion: Microstructure, nanoscale strengthening mechanisms, electrical and mechanical properties

inferredcites →https://doi.org/10.1016/j.pmatsci.2015.03.002openalex-extracted

A review on selective laser sintering/melting (SLS/SLM) of aluminium alloy powders: Processing, microstructure, and properties

inferredcites →https://doi.org/10.1016/j.pmatsci.2017.10.001openalex-extracted

Additive manufacturing of metallic components – Process, structure and properties

inferredcites →https://doi.org/10.1016/j.tca.2020.178550openalex-extracted

Kinetics of Cr clustering in a Cu-Cr-Zr alloy processed by equal-channel angular pressing: A DSC study

inferredcites →https://doi.org/10.1016/s0022-3115(02)01110-8openalex-extracted

Effect of heat treatments on the properties of CuCrZr alloys

inferredcites →https://doi.org/10.1016/s0921-5093(02)00852-3openalex-extracted

Precipitation in a Cu–Cr–Zr alloy

inferredcites →https://doi.org/10.1016/s1359-6454(01)00437-2openalex-extracted

Structure and properties of ultra-fine grain Cu–Cr–Zr alloy produced by equal-channel angular pressing

inferredcites →https://doi.org/10.1016/s1359-6462(02)00353-6openalex-extracted

Analysis of phases in a Cu–Cr–Zr alloy

inferredcites →https://doi.org/10.1088/2053-1591/ab4e2fopenalex-extracted

Effect of selective laser melting process parameters and aging heat treatment on properties of CuCrZr alloy

inferredcites →https://doi.org/10.1108/13552541211218117openalex-extracted

Factor analysis of selective laser melting process parameters and geometrical characteristics of synthesized single tracks

inferredcites →https://doi.org/10.1111/ffe.13527openalex-extracted

CuCrZr processed by laser powder bed fusion—Processability and influence of heat treatment on electrical conductivity, microstructure and mechanical properties

inferredcites →https://doi.org/10.1115/1.4039974openalex-extracted

Challenges in Three-Dimensional Printing of High-Conductivity Copper

inferredcites →https://doi.org/10.1179/026708310x12815992418210openalex-extracted

Heat treatment method for making high strength and conductivity Cu–Cr–Zr alloy

inferredcites →https://doi.org/10.1179/1743284714y.0000000734openalex-extracted

Site specific control of crystallographic grain orientation through electron beam additive manufacturing

inferredcites →https://doi.org/10.1179/cmq.1969.8.2.179openalex-extracted

Kinetics of precipitate growth in the copper-chromium system

inferredcites →https://doi.org/10.1179/mst.1985.1.4.270openalex-extracted

Precipitation and aging in high-conductivity Cu–Cr alloys with additions of zirconium and magnesium

inferredcites →https://doi.org/10.31399/asm.amp.2014-07.p020openalex-extracted

Fabricating Copper Components with Electron Beam Melting

inferredcites →https://doi.org/10.31399/asm.tb.aub.t61170457openalex-extracted

Copper and Copper Alloys

inferredcites →https://doi.org/10.3390/app9245554openalex-extracted

Effect of Scanning Strategy During Selective Laser Melting on Surface Topography, Porosity, and Microstructure of Additively Manufactured Ti-6Al-4V

inferredcites →https://doi.org/10.3390/ma10010076openalex-extracted

On the Selective Laser Melting (SLM) of the AlSi10Mg Alloy: Process, Microstructure, and Mechanical Properties

inferredcites →https://doi.org/10.3390/ma13204626openalex-extracted

Pyrometric-Based Melt Pool Monitoring Study of CuCr1Zr Processed Using L-PBF

inferredcites →https://doi.org/10.3390/ma13235400openalex-extracted

An Empirical Approach for the Development of Process Parameters for Laser Powder Bed Fusion

inferredcites →https://doi.org/10.3390/met11091410openalex-extracted

Preparation of Cu-Cr-Zr Alloy by Laser Powder Bed Fusion: Parameter Optimization, Microstructure, Mechanical and Thermal Properties for Microelectronic Applications

inferredcites →https://doi.org/10.3390/met12050701openalex-extracted

Effects of Process Parameters on the Relative Density and Properties of CuCrZr Alloy Produced by Selective Laser Melting

inferredcites →https://doi.org/10.3390/met13010150openalex-extracted

A Comparative Differential Scanning Calorimetry Study of Precipitation Hardenable Copper-Based Alloys with Optimized Strength and High Conductivity

inferredcites →https://doi.org/10.3390/met9070756openalex-extracted

3D Printing of Highly Pure Copper

Editorial review for independent work. ICSAC — the Institute for Complexity Science and Advanced Computing — runs a structured editorial panel for researchers publishing outside journals, and publishes on CiteStamp rails. Submission is free and goes through ORCID: icsacinstitute.org/submit.