On the public citation graph

Mechanical Properties and Microstructure of an Aa7050 Processed by Equal Channel Angular Pressing Combined with Inter-Pass Aging Treatment

https://doi.org/10.2139/ssrn.4693686
0 signed · 50 inferred · view as graph

Inferred edges come from two machine sources: sweeps of open repository metadata (mostly SSRN and Zenodo), and a bulk OpenAlex citation snapshot. Every row below is labelled with the one it came from. Neither is a complete citation index — absence here is not evidence of absence.

Is this your work? Sign in with ORCID and put your name on the claims that are yours.
Claim with ORCID
Reference health. See whether every reference in this work resolves to a known work and none has been retracted — and get a dated CiteStamped badge you can embed.
See reference health

What this work says

Outgoing claims: the papers this work cites, builds on, or argues with.

inferredcites →https://doi.org/10.1007/s11771-023-5267-yopenalex-extracted
Effect of room temperature multi-pass ECAP deformation on mechanical properties and precipitation phase distribution of 7075 aluminium alloy
inferredcites →https://doi.org/10.1007/s11771-023-5464-8openalex-extracted
Microstructure evolution of 7050 Al alloy fasteners during cold upsetting after equal channel angular pressing
inferredcites →https://doi.org/10.1016/0921-5093(95)09705-8openalex-extracted
Materials processing by simple shear
inferredcites →https://doi.org/10.1016/j.actamat.2013.09.042openalex-extracted
Mechanical behavior and strengthening mechanisms in ultrafine grain precipitation-strengthened aluminum alloy
inferredcites →https://doi.org/10.1016/j.actamat.2013.11.071openalex-extracted
Precipitation kinetics in a severely plastically deformed 7075 aluminium alloy
inferredcites →https://doi.org/10.1016/j.actamat.2014.07.061openalex-extracted
Influence of precipitates on low-cycle fatigue and crack growth behavior in an ultrafine-grained aluminum alloy
inferredcites →https://doi.org/10.1016/j.actamat.2015.09.017openalex-extracted
Coupling of dislocations and precipitates: Impact on the mechanical behavior of ultrafine grained Al–Zn–Mg alloys
inferredcites →https://doi.org/10.1016/j.actamat.2020.01.003openalex-extracted
Precipitation-induced mitigation of recrystallization in ultra-thin, cold-rolled AlScZrMn(Mg) sheets at brazing temperatures: The critical effect of alloy composition and thermal processing route
inferredcites →https://doi.org/10.1016/j.actamat.2020.10.074openalex-extracted
Design of Solute Clustering During Thermomechanical Processing of AA6016 Al-Mg-Si Alloy
inferredcites →https://doi.org/10.1016/j.jallcom.2013.09.202openalex-extracted
The effects of room temperature ECAP and subsequent aging on mechanical properties of 2024 Al alloy
inferredcites →https://doi.org/10.1016/j.jallcom.2014.04.119openalex-extracted
Thermo-kinetic prediction of metastable and stable phase precipitation in Al–Zn–Mg series aluminium alloys during non-isothermal DSC analysis
inferredcites →https://doi.org/10.1016/j.jallcom.2015.05.177openalex-extracted
Combining equal-channel angular pressing and heat treatment to obtain enhanced corrosion resistance in 6061 aluminum alloy
inferredcites →https://doi.org/10.1016/j.jallcom.2016.01.022openalex-extracted
Microstructure and mechanical properties of 7005 aluminum alloy processed by room temperature ECAP and subsequent annealing
inferredcites →https://doi.org/10.1016/j.jallcom.2017.11.178openalex-extracted
Precipitate behavior and mechanical properties of enhanced solution treated Al-Zn-Mg-Cu alloy during non-isothermal ageing
inferredcites →https://doi.org/10.1016/j.jallcom.2018.03.206openalex-extracted
Effect of heat treatments on the microstructures and tensile properties of an ultrafine-grained Al-Zn-Mg alloy processed by ECAP
inferredcites →https://doi.org/10.1016/j.jallcom.2018.05.085openalex-extracted
Fatigue behavior of AA7075 aluminium alloy severely deformed by equal channel angular pressing
inferredcites →https://doi.org/10.1016/j.jallcom.2020.154005openalex-extracted
Precipitation behavior and mechanical properties of Al–Zn–Mg alloy with high Zn concentration
inferredcites →https://doi.org/10.1016/j.jallcom.2021.160583openalex-extracted
Kinetics of phase precipitation in Al–Mg–Si alloys subjected to equal-channel angular pressing during subsequent heating
inferredcites →https://doi.org/10.1016/j.jallcom.2022.164400openalex-extracted
Microstructure analysis of 7050 aluminum alloy processed by multistage aging treatments
inferredcites →https://doi.org/10.1016/j.jmrt.2022.04.082openalex-extracted
Microstructure, mechanical property and thermo-stability of traditionally and severely deformed Al–Mg–Sc–Zr alloy
inferredcites →https://doi.org/10.1016/j.jmrt.2023.08.258openalex-extracted
Effects of equal channel angular pressing and further cold upsetting process to the kinetics of precipitation during aging of 7050 aluminum alloy
inferredcites →https://doi.org/10.1016/j.jmrt.2023.09.070openalex-extracted
Achieving ultra-fine grains and high corrosion resistance of Al–Zn–Mg–Cu alloy by ECAP and post cold rolling
inferredcites →https://doi.org/10.1016/j.jmst.2019.11.035openalex-extracted
Natural-ageing-enhanced precipitation near grain boundaries in high-strength aluminum alloy
inferredcites →https://doi.org/10.1016/j.matchar.2015.12.018openalex-extracted
Optimization of interpass annealing for a minimum recrystallized grain size and further grain refinement towards nanostructured AA6063 during equal channel angular pressing
inferredcites →https://doi.org/10.1016/j.matchar.2017.11.018openalex-extracted
Dynamic microstructural evolution of an Al–Zn–Mg–Cu alloy (7075) during continuous heating and the influence on the viscoelastic response
inferredcites →https://doi.org/10.1016/j.matchar.2019.04.031openalex-extracted
Influence of equal channel angular pressing on the evolution of microstructures, aging behavior and mechanical properties of as-quenched Al-6.6Zn-1.25Mg alloy
inferredcites →https://doi.org/10.1016/j.matchar.2021.110904openalex-extracted
Study on anisotropy of Al-Zn-Mg-Sc-Zr alloy sheet
inferredcites →https://doi.org/10.1016/j.matchar.2023.113248openalex-extracted
Effect of intermediate-temperature severe plastic deformation on microstructure evolution, mechanical properties and corrosion behavior of an Al-Zn-Mg-Cu alloy
inferredcites →https://doi.org/10.1016/j.matdes.2011.08.003openalex-extracted
Microstructural characterization and mechanical properties of nanostructured AA1070 aluminum after equal channel angular extrusion
inferredcites →https://doi.org/10.1016/j.matdes.2011.12.014openalex-extracted
A combination of severe plastic deformation and ageing phenomena in Al–Mg–Si Alloys
inferredcites →https://doi.org/10.1016/j.matdes.2013.12.024openalex-extracted
Effect of cooling aging on microstructure and mechanical properties of an Al–Zn–Mg–Cu alloy
inferredcites →https://doi.org/10.1016/j.matdes.2014.01.008openalex-extracted
Microstructure and mechanical properties of Al-7075 alloy processed by equal channel angular pressing combined with aging treatment
inferredcites →https://doi.org/10.1016/j.matdes.2016.08.091openalex-extracted
An evaluation of diffraction peak profile analysis (DPPA) methods to study plastically deformed metals
inferredcites →https://doi.org/10.1016/j.msea.2007.01.001openalex-extracted
The effect of severe plastic deformation on precipitation in supersaturated Al–Zn–Mg alloys
inferredcites →https://doi.org/10.1016/j.msea.2010.04.017openalex-extracted
Strengthening study on 6082 Al alloy after combination of aging treatment and ECAP process
inferredcites →https://doi.org/10.1016/j.msea.2011.04.007openalex-extracted
High Strength AA7050 Al alloy processed by ECAP: Microstructure and mechanical properties
inferredcites →https://doi.org/10.1016/j.msea.2011.11.031openalex-extracted
Microstructural and mechanical properties of Al 7075 alloy processed by Equal Channel Angular Pressing
inferredcites →https://doi.org/10.1016/j.msea.2012.05.026openalex-extracted
Characterisation of high pressure torsion processed 7150 Al–Zn–Mg–Cu alloy
inferredcites →https://doi.org/10.1016/j.msea.2013.12.103openalex-extracted
Achieve high ductility and strength in an Al–Mg alloy by severe plastic deformation combined with inter-pass annealing
inferredcites →https://doi.org/10.1016/j.msea.2016.12.099openalex-extracted
Effect of ECAP processing on microstructure evolution and dynamic compressive behavior at different temperatures in an Al-Zn-Mg alloy
inferredcites →https://doi.org/10.1016/j.msea.2017.01.024openalex-extracted
Improvement of mechanical properties of AA6063 aluminum alloy after equal channel angular pressing by applying a two-stage solution treatment
inferredcites →https://doi.org/10.1016/j.msea.2018.06.047openalex-extracted
Mechanical properties and microstructure evolution of ultra-high strength Al-Zn-Mg-Cu alloy processed by room temperature ECAP with post aging
inferredcites →https://doi.org/10.1016/j.msea.2019.138485openalex-extracted
The influence of Cryo-ECAP and aging on the microstructure and mechanical behavior of AA6061 Al alloy
inferredcites →https://doi.org/10.1016/j.msea.2022.143342openalex-extracted
Effects of rolling deformation on precipitation behavior and mechanical properties of Al–Zn–Mg–Cu alloy
inferredcites →https://doi.org/10.1016/j.msea.2022.143764openalex-extracted
Effects of cryorolling, room temperature rolling and aging treatment on mechanical and corrosion properties of 7050 aluminum alloy
inferredcites →https://doi.org/10.1016/j.rineng.2022.100739openalex-extracted
Grain refinement of Al–Zn–Mg alloy during equal channel angular pressing (ECAP)
inferredcites →https://doi.org/10.1016/s1003-6326(22)65884-9openalex-extracted
Strong and ductile Al–Zn–Mg–Zr alloy obtained by equal angular pressing and subsequent aging
inferredcites →https://doi.org/10.1063/1.117951openalex-extracted
The effect of dislocation contrast on x-ray line broadening: A new approach to line profile analysis
inferredcites →https://doi.org/10.1186/s10033-021-00549-4openalex-extracted
Comparison of Modified Mohr–Coulomb Model and Bai–Wierzbicki Model for Constructing 3D Ductile Fracture Envelope of AA6063
inferredcites →https://doi.org/10.4028/www.scientific.net/msf.331-337.1249openalex-extracted
Influence of Different Minor Additions on Structure and Properties of High-Strength Al-Zn-Mg-Cu Alloy Sheets
Editorial review for independent work. ICSAC — the Institute for Complexity Science and Advanced Computing — runs a structured editorial panel for researchers publishing outside journals, and publishes on CiteStamp rails. Submission is free and goes through ORCID: icsacinstitute.org/submit.