On the public citation graph

Precipitation and Corrosion Behaviors of Al-Zn-Mg-Cu Alloys with the Coupled Soft/Hard Micro-Areas

https://doi.org/10.2139/ssrn.4785030
0 signed · 69 inferred · view as graph

Inferred edges come from two machine sources: sweeps of open repository metadata (mostly SSRN and Zenodo), and a bulk OpenAlex citation snapshot. Every row below is labelled with the one it came from. Neither is a complete citation index — absence here is not evidence of absence.

Is this your work? Sign in with ORCID and put your name on the claims that are yours.
Claim with ORCID
Reference health. See whether every reference in this work resolves to a known work and none has been retracted — and get a dated CiteStamped badge you can embed.
See reference health

What this work says

Outgoing claims: the papers this work cites, builds on, or argues with.

inferredcites →https://doi.org/10.1007/s10853-012-6428-9openalex-extracted
Effects of Cu and Al on the crystal structure and composition of η (MgZn2) phase in over-aged Al–Zn–Mg–Cu alloys
inferredcites →https://doi.org/10.1007/s11661-000-0269-xopenalex-extracted
Differential scanning calorimetry and electron diffraction investigation on low-temperature aging in Al-Zn-Mg alloys
inferredcites →https://doi.org/10.1007/s11661-015-3050-xopenalex-extracted
Solidification Paths and Phase Components at High Temperatures of High-Zn Al-Zn-Mg-Cu Alloys with Different Mg and Cu Contents
inferredcites →https://doi.org/10.1007/s11661-015-3196-6openalex-extracted
Precipitation of Non-spherical Particles in Aluminum Alloys Part II: Numerical Simulation and Experimental Characterization During Aging Treatment of an Al-Mg-Si Alloy
inferredcites →https://doi.org/10.1007/s11771-021-4802-yopenalex-extracted
Influence of aging on microstructure, mechanical properties and stress corrosion cracking of 7136 aluminum alloy
inferredcites →https://doi.org/10.1007/s11771-022-4961-5openalex-extracted
Micro porosity and its effect on fatigue performance of 7050 aluminum thick plates
inferredcites →https://doi.org/10.1007/s12613-018-1645-0openalex-extracted
Effect of particle size distribution on the microstructure, texture, and mechanical properties of Al–Mg–Si–Cu alloy
inferredcites →https://doi.org/10.1007/s12613-020-2235-5openalex-extracted
Determining role of heterogeneous microstructure in lowering yield ratio and enhancing impact toughness in high-strength low-alloy steel
inferredcites →https://doi.org/10.1007/s12613-022-2428-1openalex-extracted
Relationship between elements migration of α-AlFeMnSi phase and micro-galvanic corrosion sensitivity of Al—Zn—Mg alloy
inferredcites →https://doi.org/10.1016/j.actamat.2003.12.022openalex-extracted
Three strategies to achieve uniform tensile deformation in a nanostructured metal
inferredcites →https://doi.org/10.1016/j.actamat.2004.06.025openalex-extracted
Early-stage precipitation in Al–Zn–Mg–Cu alloy (7050)
inferredcites →https://doi.org/10.1016/j.actamat.2009.03.017openalex-extracted
Influence of equal-channel angular pressing on precipitation in an Al–Zn–Mg–Cu alloy
inferredcites →https://doi.org/10.1016/j.actamat.2009.09.003openalex-extracted
Influence of alloy composition and heat treatment on precipitate composition in Al–Zn–Mg–Cu alloys
inferredcites →https://doi.org/10.1016/j.actamat.2013.09.042openalex-extracted
Mechanical behavior and strengthening mechanisms in ultrafine grain precipitation-strengthened aluminum alloy
inferredcites →https://doi.org/10.1016/j.corsci.2006.12.001openalex-extracted
Crack tip chemistry and electrochemistry of environmental cracks in AA 7050
inferredcites →https://doi.org/10.1016/j.corsci.2009.08.001openalex-extracted
Effect of Cr, Yb and Zr additions on localized corrosion of Al–Zn–Mg–Cu alloy
inferredcites →https://doi.org/10.1016/j.cossms.2004.10.002openalex-extracted
Structure–properties relationship in TRIP steels containing carbide-free bainite
inferredcites →https://doi.org/10.1016/j.ijplas.2017.05.009openalex-extracted
Stress/strain gradient plasticity model for size effects in heterogeneous nano-microstructures
inferredcites →https://doi.org/10.1016/j.jallcom.2003.11.175openalex-extracted
The effect of Cu on mechanical and precipitation properties of Al–Zn–Mg alloys
inferredcites →https://doi.org/10.1016/j.jallcom.2014.04.119openalex-extracted
Thermo-kinetic prediction of metastable and stable phase precipitation in Al–Zn–Mg series aluminium alloys during non-isothermal DSC analysis
inferredcites →https://doi.org/10.1016/j.jallcom.2016.08.255openalex-extracted
Microstructures and properties evolution of spray-deposited Al-Zn-Mg-Cu-Zr alloys with scandium addition
inferredcites →https://doi.org/10.1016/j.jallcom.2018.05.063openalex-extracted
Effect of Zn/Mg ratios on SCC, electrochemical corrosion properties and microstructure of Al-Zn-Mg alloy
inferredcites →https://doi.org/10.1016/j.jallcom.2018.11.286openalex-extracted
Recent advances in ageing of 7xxx series aluminum alloys: A physical metallurgy perspective
inferredcites →https://doi.org/10.1016/j.jallcom.2021.162903openalex-extracted
Effect of Mn content on the microstructure and corrosion resistance of Al-Cu-Mg-Mn alloys
inferredcites →https://doi.org/10.1016/j.jallcom.2023.171006openalex-extracted
Deformation mechanisms and mechanical properties of the high-strength and ductile Al-Zn-Mg-Cu alloys processed by repetitive continuous extrusion forming process with different heat treatments
inferredcites →https://doi.org/10.1016/j.jmrt.2020.12.068openalex-extracted
Synergy in hybrid multi-scale particles for the improved formability of Al–Zn–Mg–Cu alloys
inferredcites →https://doi.org/10.1016/j.jmrt.2022.03.018openalex-extracted
Ultra-fast bake-hardening response of Al-Mg-Si-Cu-Zn alloys with the assistance of heterogeneous nucleation
inferredcites →https://doi.org/10.1016/j.jmrt.2023.08.109openalex-extracted
Effects of solution treatment on microstructure and mechanical properties of (SiC+TiB2)/Al–Zn–Mg–Cu composite fabricated by laser powder bed fusion
inferredcites →https://doi.org/10.1016/j.jmst.2020.01.022openalex-extracted
Thermodynamics and kinetics of phase transformation in rare earth–magnesium alloys: A critical review
inferredcites →https://doi.org/10.1016/j.jmst.2020.12.045openalex-extracted
Investigation on microstructure and mechanical properties of Al-Zn-Mg-Cu alloys with various Zn/Mg ratios
inferredcites →https://doi.org/10.1016/j.jmst.2022.09.033openalex-extracted
Strength and ductility enhancement of twin-roll cast Al-Zn-Mg-Cu alloys with high solidification intervals through a synergistic segregation-controlling strategy
inferredcites →https://doi.org/10.1016/j.matchar.2017.08.013openalex-extracted
The formation of bimodal grain size distribution in Al-Mg-Si-Cu alloy and its effect on the formability
inferredcites →https://doi.org/10.1016/j.matchar.2017.10.012openalex-extracted
Effect of Zn on microstructure, texture and mechanical properties of Al-Mg-Si-Cu alloys with a medium number of Fe-rich phase particles
inferredcites →https://doi.org/10.1016/j.matchar.2022.112295openalex-extracted
Evading the low formability dilemma in Al-Zn-Mg-Cu alloys via heterogeneous structure
inferredcites →https://doi.org/10.1016/j.matdes.2012.07.050openalex-extracted
Effect of Sc addition on the work-hardening behavior of ZK60 magnesium alloy
inferredcites →https://doi.org/10.1016/j.matdes.2015.06.183openalex-extracted
Investigation of mechanical and corrosion properties of an Al–Zn–Mg–Cu alloy under various ageing conditions and interface analysis of η′ precipitate
inferredcites →https://doi.org/10.1016/j.mattod.2017.02.003openalex-extracted
Towards strength–ductility synergy through the design of heterogeneous nanostructures in metals
inferredcites →https://doi.org/10.1016/j.msea.2007.05.116openalex-extracted
Structure–property correlations in Al 7050 and Al 7055 high-strength aluminum alloys
inferredcites →https://doi.org/10.1016/j.msea.2015.07.070openalex-extracted
Process model to predict yield strength of AA6063 alloy
inferredcites →https://doi.org/10.1016/j.msea.2016.01.039openalex-extracted
Tailored Mg and Cu contents affecting the microstructures and mechanical properties of high-strength Al–Zn–Mg–Cu alloys
inferredcites →https://doi.org/10.1016/j.msea.2016.09.084openalex-extracted
Effect of Zn addition on the microstructure, texture evolution and mechanical properties of Al-Mg-Si-Cu alloys
inferredcites →https://doi.org/10.1016/j.msea.2017.04.086openalex-extracted
A physical-based constitutive model to describe the strain-hardening and dynamic recovery behaviors of 5754 aluminum alloy
inferredcites →https://doi.org/10.1016/j.msea.2018.07.048openalex-extracted
Structure-property models in Al-Zn-Mg-Cu alloys: A critical experimental assessment of shape castings
inferredcites →https://doi.org/10.1016/j.msea.2018.09.109openalex-extracted
On the role of precipitates in controlling microstructure and mechanical properties of Ag and Sn added 7075 alloys during artificial ageing
inferredcites →https://doi.org/10.1016/j.msea.2019.05.073openalex-extracted
Effect of natural ageing or pre-ageing on the evolution of precipitate structure and strength during age hardening of Al–Mg–Si alloy AA 6016
inferredcites →https://doi.org/10.1016/j.msea.2020.139807openalex-extracted
Effect of trace Er on the microstructure and properties of Al–Zn–Mg–Cu–Zr alloys during heat treatments
inferredcites →https://doi.org/10.1016/j.msea.2022.142737openalex-extracted
Extremely improved formability of Al–Zn–Mg–Cu alloys via micro-domain heterogeneous structure
inferredcites →https://doi.org/10.1016/j.msea.2022.143016openalex-extracted
Effect of silicon content on nucleation and growth of multiscale precipitates in Al–Mg–Si–Cu–Zn alloys for different aging paths
inferredcites →https://doi.org/10.1016/j.msea.2022.143028openalex-extracted
Enhanced stiffness of Al–Zn–Mg–Cu alloys via heterogeneous structure of soft and hard microdomains
inferredcites →https://doi.org/10.1016/j.msea.2022.143764openalex-extracted
Effects of cryorolling, room temperature rolling and aging treatment on mechanical and corrosion properties of 7050 aluminum alloy
inferredcites →https://doi.org/10.1016/j.msea.2022.143951openalex-extracted
Design, evolution, formation and effect mechanism of coupling distributed soft and hard micro-regions in Al–Zn–Mg–Cu–Fe alloys with high formability
inferredcites →https://doi.org/10.1016/j.msea.2023.145384openalex-extracted
Unusual secondary precipitation within the primary precipitation free zone substantially enhances the ductility of Al–Zn–Mg–Cu alloy
inferredcites →https://doi.org/10.1016/j.mtcomm.2023.105943openalex-extracted
Influences of small addition of Sc and Zr on grain structure and quenching sensitivity of Al-Zn-Mg-Cu alloys
inferredcites →https://doi.org/10.1016/j.scriptamat.2006.09.028openalex-extracted
Influence of high-temperature pre-precipitation on local corrosion behaviors of Al–Zn–Mg alloy
inferredcites →https://doi.org/10.1016/s0921-5093(02)00398-2openalex-extracted
Modeling the strengthening response to aging process of heat-treatable aluminum alloys containing plate/disc- or rod/needle-shaped precipitates
inferredcites →https://doi.org/10.1016/s1003-6326(11)61092-3openalex-extracted
Corrosion mechanism associated with Mg2Si and Si particles in Al–Mg–Si alloys
inferredcites →https://doi.org/10.1016/s1003-6326(11)61131-xopenalex-extracted
Warm forming behavior of high strength aluminum alloy AA7075
inferredcites →https://doi.org/10.1016/s1003-6326(18)64839-3openalex-extracted
Wettability, microstructure and properties of 6061 aluminum alloy/304 stainless steel butt joint achieved by laser-metal inert-gas hybrid welding-brazing
inferredcites →https://doi.org/10.1016/s1003-6326(20)65308-0openalex-extracted
Effects of minor Sc and Zr additions on mechanical properties and microstructure evolution of Al−Zn−Mg−Cu alloys
inferredcites →https://doi.org/10.1016/s1003-6326(21)65732-1openalex-extracted
Theoretical design and distribution control of precipitates and solute elements in Al−Zn−Mg−Cu alloys with heterostructure
inferredcites →https://doi.org/10.1016/s1359-6454(02)00063-0openalex-extracted
Precipitation sequences during quenching of the AA 7010 alloy
inferredcites →https://doi.org/10.1016/s1359-6454(98)00296-1openalex-extracted
Influence of predeformation and agEing of an Al–Zn–Mg alloy—II. Modeling of precipitation kinetics and yield stress
inferredcites →https://doi.org/10.1073/pnas.1324069111openalex-extracted
Extraordinary strain hardening by gradient structure
inferredcites →https://doi.org/10.1073/pnas.1517193112openalex-extracted
Heterogeneous lamella structure unites ultrafine-grain strength with coarse-grain ductility
inferredcites →https://doi.org/10.1080/09500830600643270openalex-extracted
3D atom probe study of solute atoms clustering during natural ageing and pre-ageing of an Al-Mg-Si alloy
inferredcites →https://doi.org/10.1080/14786435.2021.1916114openalex-extracted
Multi-scale iron-rich phases induce fine microstructures in Al-Zn-Mg-Cu-Fe alloys
inferredcites →https://doi.org/10.1179/1743133611y.0000000021openalex-extracted
Modelling yield strength of heat treated Al–Si–Mg casting alloys
inferredcites →https://doi.org/10.3390/met10081094openalex-extracted
A Constitutive Model for Yield Strength and Work Hardening Behaviour of Aluminium Alloys during Artificial Ageing
inferredcites →https://doi.org/10.4028/www.scientific.net/msf.794-796.479openalex-extracted
Effect of the Zn/Mg Ratio on Microstructure and Mechanical Properties in Al-Zn-Mg Alloys
Editorial review for independent work. ICSAC — the Institute for Complexity Science and Advanced Computing — runs a structured editorial panel for researchers publishing outside journals, and publishes on CiteStamp rails. Submission is free and goes through ORCID: icsacinstitute.org/submit.