On the public citation graph

Unraveling the Wear Mechanism of Ti(C, N)-Based Cermet Tools During High-Speed Cutting

https://doi.org/10.2139/ssrn.4792020

0 signed · 63 inferred · view as graph

Inferred edges come from two machine sources: sweeps of open repository metadata (mostly SSRN and Zenodo), and a bulk OpenAlex citation snapshot. Every row below is labelled with the one it came from. Neither is a complete citation index — absence here is not evidence of absence.

Is this your work? Sign in with ORCID and put your name on the claims that are yours.

Claim with ORCID

Reference health. See whether every reference in this work resolves to a known work and none has been retracted — and get a dated CiteStamped badge you can embed.

See reference health

What this work says

Outgoing claims: the papers this work cites, builds on, or argues with.

inferredcites →https://doi.org/10.1007/s00170-015-6823-xopenalex-extracted

Tool damage and machined-surface quality using hot-pressed sintering Ti(C7N3)/WC/TaC cermet cutting inserts for high-speed turning stainless steels

inferredcites →https://doi.org/10.1007/s00170-016-8847-2openalex-extracted

Onset and evolution of discontinuously segmented chip flow in ultra-high-speed cutting Ti-6Al-4V

inferredcites →https://doi.org/10.1007/s00170-017-0666-6openalex-extracted

Cutting performance of tools made of different materials in the machining of 42CrMo4 high-strength steel: a comparative study

inferredcites →https://doi.org/10.1007/s00170-020-06052-9openalex-extracted

A review on cutting tool technology in machining of Ni-based superalloys

inferredcites →https://doi.org/10.1007/s11666-018-0799-7openalex-extracted

Indentation Fracture Behavior of Low Carbon Steel Thermal Spray Coatings: Role of Dry Sliding-Induced Tribolayer

inferredcites →https://doi.org/10.1016/j.actamat.2010.01.020openalex-extracted

Wear and friction of TiAlN/VN coatings against Al2O3 in air at room and elevated temperatures

inferredcites →https://doi.org/10.1016/j.actamat.2010.04.005openalex-extracted

Sliding wear of nanocrystalline Ni–W: Structural evolution and the apparent breakdown of Archard scaling

inferredcites →https://doi.org/10.1016/j.actamat.2018.09.016openalex-extracted

Microstructure evolution and deformation mechanisms during high rate and cryogenic sliding of copper

inferredcites →https://doi.org/10.1016/j.actamat.2019.12.005openalex-extracted

Solid solution strengthening and deformation behavior of single-phase Cu-base alloys under tribological load

inferredcites →https://doi.org/10.1016/j.actamat.2020.02.039openalex-extracted

Achieving exceptional wear resistance in a compositionally complex alloy via tuning the interfacial structure and chemistry

inferredcites →https://doi.org/10.1016/j.actamat.2020.116545openalex-extracted

Temperature-induced wear transition in ceramic-metal composites

inferredcites →https://doi.org/10.1016/j.actamat.2021.117353openalex-extracted

High diffusivity pathways govern massively enhanced oxidation during tribological sliding

inferredcites →https://doi.org/10.1016/j.actamat.2021.117439openalex-extracted

Bond strength between TiN coating and microstructural constituents of a high speed steel determined by first principle calculations

inferredcites →https://doi.org/10.1016/j.actamat.2023.119439openalex-extracted

Macroscale ultradurable superlubricity on passivated transition-metal diborides

inferredcites →https://doi.org/10.1016/j.actamat.2023.119538openalex-extracted

Strain and phase evolution in TiAlN coatings during high-speed metal cutting: An in operando high-energy x-ray diffraction study

inferredcites →https://doi.org/10.1016/j.ceramint.2017.02.034openalex-extracted

Fabrication and cutting performance of Ti(C,N)-based cermet tools used for machining of high-strength steels

inferredcites →https://doi.org/10.1016/j.ceramint.2017.10.003openalex-extracted

Comparison of Ti(C, N)-based cermets by vacuum and gas-pressure sintering: Microstructure and mechanical properties

inferredcites →https://doi.org/10.1016/j.ceramint.2018.02.040openalex-extracted

Flank wear mechanism and tool endurance of (Ti,W)C-Mo2C-Co cermets during dry turning

inferredcites →https://doi.org/10.1016/j.ceramint.2018.06.080openalex-extracted

Strengthened Ti(C, N)-based cermets using high-energy ball-milled NiTiC binders: Microstructure and mechanical properties

inferredcites →https://doi.org/10.1016/j.ceramint.2022.01.203openalex-extracted

Structure and mechanical behavior evaluation of CVD multilayer coatings deposited on Ti(C,N)-based cermets

inferredcites →https://doi.org/10.1016/j.ceramint.2023.02.255openalex-extracted

Study on the growth and wear characters of CVD coating deposited on Ti(C, N)-based cermets with adding different C/N ratios of Ti(C, N) powders

inferredcites →https://doi.org/10.1016/j.ceramint.2023.05.205openalex-extracted

Wear behavior of SiAlON ceramic tool and its effects during high-speed cutting

inferredcites →https://doi.org/10.1016/j.cja.2023.05.029openalex-extracted

Machinability of γ-TiAl: A review

inferredcites →https://doi.org/10.1016/j.compositesb.2020.108161openalex-extracted

Nanocrystalline WC-Co composite with ultrahigh hardness and toughness

inferredcites →https://doi.org/10.1016/j.ijmachtools.2005.07.024openalex-extracted

Heat generation and temperature prediction in metal cutting: A review and implications for high speed machining

inferredcites →https://doi.org/10.1016/j.ijmachtools.2011.12.009openalex-extracted

Cutting AISI 1045 steel at very high speeds

inferredcites →https://doi.org/10.1016/j.ijmachtools.2014.06.006openalex-extracted

Critical cutting speed for onset of serrated chip flow in high speed machining

inferredcites →https://doi.org/10.1016/j.ijmecsci.2019.02.038openalex-extracted

Feasibility study of the Ti(C7N3)-based cermet micro-mill based on dynamic fatigue behavior and modeling of the contact stress distribution on the round cutting edge

inferredcites →https://doi.org/10.1016/j.ijrmhm.2008.07.011openalex-extracted

Synthesis, sintering, and mechanical properties of nanocrystalline cemented tungsten carbide – A review

inferredcites →https://doi.org/10.1016/j.ijrmhm.2020.105255openalex-extracted

Study on cutting performance of cermet tool in turning of hardened alloy steel

inferredcites →https://doi.org/10.1016/j.ijrmhm.2020.105291openalex-extracted

High-quality Ti(C,N)-based cermets via solid-state nitrogen-pressure sintering: Influence of the sintering atmosphere

inferredcites →https://doi.org/10.1016/j.ijrmhm.2020.105375openalex-extracted

Influence of NbC additions on microstructure and wear resistance of Ti(C,N)-based cermets bonded by CoCrFeNi high-entropy alloy

inferredcites →https://doi.org/10.1016/j.ijrmhm.2021.105549openalex-extracted

Mechanism of adhesion failure during interrupted cutting with cemented carbide tools: Experimental and ab-initio perspective

inferredcites →https://doi.org/10.1016/j.ijrmhm.2023.106290openalex-extracted

Effects of nano-Al2O3 addition on microstructure, mechanical properties, and wear resistance of Ti(C, N)-based cermets

inferredcites →https://doi.org/10.1016/j.ijrmhm.2024.106625openalex-extracted

Grain growth behavior in TaC-modified ultrafine Ti(C, N)-based cermets

inferredcites →https://doi.org/10.1016/j.jallcom.2014.05.150openalex-extracted

Study of a hot-pressed sintering preparation of Ti(C7N3)-based composite cermets materials and their performance as cutting tools

inferredcites →https://doi.org/10.1016/j.jallcom.2019.01.145openalex-extracted

Extremely toughened Ti-based solid-solution carbide cermets

inferredcites →https://doi.org/10.1016/j.jallcom.2019.153197openalex-extracted

Effect of multilayer core-shell microstructure on mechanical properties of Ti(C,N) based self-lubricating cermet materials

inferredcites →https://doi.org/10.1016/j.jallcom.2024.174141openalex-extracted

Enhanced densification of ultrafine Ti(C, N)-based cermets based on grain-growth induced liquid-phase pore filling mechanism

inferredcites →https://doi.org/10.1016/j.jclepro.2020.121160openalex-extracted

A novel intelligent reasoning system to estimate energy consumption and optimize cutting parameters toward sustainable machining

inferredcites →https://doi.org/10.1016/j.jmatprotec.2005.12.007openalex-extracted

An analysis of the residual stresses generated in Inconel 718™ when turning

inferredcites →https://doi.org/10.1016/j.jmatprotec.2013.05.019openalex-extracted

Determination of tool friction in presence of flank wear and stress distribution based validation using finite element simulations in machining of titanium and nickel based alloys

inferredcites →https://doi.org/10.1016/j.jmatprotec.2016.04.011openalex-extracted

An experimental investigation of micro-machinability of aluminum alloy 2024 using Ti(C7N3)-based cermet micro end-mill tools

inferredcites →https://doi.org/10.1016/j.msea.2016.11.085openalex-extracted

Influence of coarse TiCN content on the morphology and mechanical properties of ultrafine TiCN-based cermets

inferredcites →https://doi.org/10.1016/j.msea.2022.143194openalex-extracted

Nano TiC modified Ti(C,N)-based cermets with weakened rim-binder interfaces

inferredcites →https://doi.org/10.1016/j.msea.2023.144905openalex-extracted

Enhancing hardness and toughness of WC simultaneously by dispersed ZrO2

inferredcites →https://doi.org/10.1016/j.scriptamat.2015.01.023openalex-extracted

Enhancing wear resistance of Cu–Al alloy by controlling subsurface dynamic recrystallization

inferredcites →https://doi.org/10.1016/j.scriptamat.2017.09.006openalex-extracted

Shear-induced softening of nanocrystalline metal interfaces at cryogenic temperatures

inferredcites →https://doi.org/10.1016/j.triboint.2019.01.030openalex-extracted

Tool wear mechanisms and micro-channels quality in micro-machining of Ti-6Al-4V alloy using the Ti(C7N3)-based cermet micro-mills

inferredcites →https://doi.org/10.1016/j.triboint.2019.105900openalex-extracted

Effect of the progressive tool wear on surface topography and chip formation in micro-milling of Ti–6Al–4V using Ti(C7N3)-based cermet micro-mill

inferredcites →https://doi.org/10.1016/j.triboint.2024.109360openalex-extracted

Grinding damage mechanisms and wear mechanisms of the new cermet micro-milling cutters

inferredcites →https://doi.org/10.1016/j.vacuum.2018.07.012openalex-extracted

Fabrication and wear mechanism of Ti(C,N)-based cermets tools with designed microstructures used for machining aluminum alloy

inferredcites →https://doi.org/10.1016/j.wear.2008.12.035openalex-extracted

Wear mechanisms of WC–Co cutting tools from high-speed tribological tests

inferredcites →https://doi.org/10.1016/j.wear.2020.203319openalex-extracted

Wear mechanism and tool life prediction of high-strength vermicular graphite cast iron tools for high-efficiency cutting

inferredcites →https://doi.org/10.1016/j.wear.2021.204214openalex-extracted

Performance evaluations of Ti-based PVD coatings deposited on cermet tools for high-speed dry finish turning of AISI 304 stainless steel

inferredcites →https://doi.org/10.1016/j.wear.2023.204758openalex-extracted

Wear mechanisms of solid carbide cutting tools in dry and cryogenic machining of AISI H13 steel with varying cutting-edge radius

inferredcites →https://doi.org/10.1038/srep31047openalex-extracted

Effect of WC/Co coherency phase boundaries on Fracture toughness of the nanocrystalline cemented carbides

inferredcites →https://doi.org/10.1080/17436753.2020.1765292openalex-extracted

Cutting performances of TiCN–HfC and TiCN–HfC–WC ceramic tools in dry turning hardened AISI H13

inferredcites →https://doi.org/10.1088/0965-0393/23/5/055013openalex-extracted

Modelling the tuned criticality in stick-slip friction during metal cutting

inferredcites →https://doi.org/10.1088/2631-7990/ac9e27openalex-extracted

Friction behaviors in the metal cutting process: state of the art and future perspectives

inferredcites →https://doi.org/10.1111/ijac.13643openalex-extracted

Effects of composite binder phase on microstructure and mechanical properties of ultrafine‐grained cemented carbides

inferredcites →https://doi.org/10.1111/jace.16893openalex-extracted

Ti(C,N)‐based cermets with strengthened interfaces: Roles of secondary cubic carbides

inferredcites →https://doi.org/10.3390/lubricants11030122openalex-extracted

A Critical Review of High-Temperature Tribology and Cutting Performance of Cermet and Ceramic Tool Materials

Editorial review for independent work. ICSAC — the Institute for Complexity Science and Advanced Computing — runs a structured editorial panel for researchers publishing outside journals, and publishes on CiteStamp rails. Submission is free and goes through ORCID: icsacinstitute.org/submit.